R.R damages on RGMSJ road Km. 0.000 to 61.000

Excavation in Hill area by manual/mechanical means:- Excavation in soil in hill areas all heights and depth in all kind of soil including saturated soil comprising of mixed soil, ordinary rock and hardd rock all work of rock cutting by blasting shall be carried out by taking all necessary precautions against soil erosion, damage to hill side, water pollution etc. and to protect stability of hill side. Rock shall be excavated with chiselling and wedging out rock( where blasting is prohibited) including cutting and trimming of side slopes and disposing of excavated earth with a lift upto all heights and all leads as directed by the Engineer-in-Charge, in conformately with the requirement of technical specification of rural roads clause 1603.1 all useful material such as stone, shingle, aggregates& slate etc. shall be sorted out and stacked along the road side properly. Any loss to the public and private property to during the course of execution shall be the absoulte responsibility of the contractor which shall have to be duly compensated by him in all cases.

Earth work in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto all leads , dressing of sides and bottom and back filling in trenches with excavated suitable material in ordinary soil upto all depth. as directed by the Engineer-in-Charge.all useful material such as stone, shingle, aggregates& slate etc. shall be sorted out and stacked along the road side properly. Any loss to the public and private property to during the course of execution shall be the absoulte responsibility of the contractor which shall have to be duly compensated by him in all cases.

Providing and laying cement concrete 1:6:12 (1 cement : 6 sand : 12 agregate stone 40mm nominal size) including the cost of form work for plain/reinforced concrete in retaining walls, breast walls, the size of plum should be 150 to 300 mm. as per drawing and H.P.P.W.D. technical specifications. including the cost of form work and hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing 1:1½:3 (1 cement : 1½ coarse sand) : 3 graded stone aggregate 20 mm nominal size). including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Providing and laying cement concrete in beams,suspended floor, roofshaving slope up to 15' landing,balconies,shelves,chajja,lintels,bands,plain window,sills,staircase and spiral stair case above plinth level to floor level , excluding the cost of centering, shuttering and finishing 1:1½:3 (1 cement : 1½ coarse sand) : 3graded stone aggregate 20 mm nominal size). including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Supplying fitting and placing HYSD bars reinforcement complete in super structure as per drawing and technical specification. including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Backfilling behind abutment, wing wall and return wall complete as per drawings and technical specification clause 1204.3.8 with granular material including hauling of material in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge.