Construction of Shed for Store at AMPRI,Bhopal

Amount

Earthwork in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plain including disposal of excavateed earth upto 50 m and lift 1.5 m disposed soil to be levelled and neatly dressed:

All kinds of soil

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge. 2.7.1 Ordinary rock

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8(1 cement :4 coarse sand(zone III): 8 graded stone aggregate 40mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form work for :Columns, piers, abutments, pillars, posts and struts

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500 D or more

Centering and shuttering including strutting, propping etc. and removal of form for all heights : Lintels, beams, plinth beams, girders, bressumers and cantilevers

Supplying and fixing rolling shutter of aprovad make, made of required size M.S. laths, interlocked together through their entire length and joined together at the end by end locks, mounted on specially designed pipe shaft with brackets,side guide and arrengmentsw for inside and outside locking push and pull operation compete ,including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS:4454 part 1 and M.S. top cover of required thickness for rolling shutters 80X125 mm M. S. lath with 1.25 mm thick top cover with mechnical device chain and crank operation for operting rolling shutters(Geared)

12 mm cement plaster of mix :1:4 (1 cement: 4 sand)

18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand).

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Wall painting with premium acrylic emulsion paint of interior grade(Plastic Paint), having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.and colour. Two or more coats

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

Dismantling MS chain link fencing including disposal of rubbish to the dumping ground within 50 metres lead.

Providing and laying 60mm thick factory made rubber moulded cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of stone dust filling the joints with fine sand and sides shall be locked with concrete 1:2:4 etc. all complete as per the direction of Engineer-in-charge.

Structural steel work in providing and fixing MS Sheet 3 mm thick door including grouting of angle frame 50x50x6 mm in position and applying a priming coat of approved steel primer and two coat of oil paint all complete as direction of E-in-C

Supplying and filling moorum/kopra, base of floor/rooad etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by Vibratory roller and watering, levelling etc complete

Brick work with chimny brick of RAVI/KAVI/ SHREE/A D in superstructure above plinth level upto floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand)

Providing and applying multicoat synthetic plaster as per approved design, pattern texture in 2 mm thick on new plastered surface finished in proper line and level as directed by Engineer-in-charge in five coats consisting of composition of four order of application given as under includig all materials, labour and scaffoldings etc. 1) Scrapping of the new surface and applying sealer primer mixed with water in the ratio 1:3 (part sealer primer : 3 part water) and applying by brush @ 0.25 kg/sqm. 2) Applying levelling coat of spectrum rustic fine or equivalent with trwel as a putty finished to generate required texture by trowel. 3) Applying third coat of synthetic plaster with trwel @ 2.5 kg/sqm finished to generate required texture by trwel. 4) Applying two coats of exterior super fine pigmented acrylic wall coating as top coat @ 0.5 kg/sqm in two coats and colours as approved by Engineer-in-charge all up to a height of 10m.

Labour for shifting of machines,jungle clearance, junk clearance etc

Structural steel work in single/built up sections are made from hot rolled plates with minimum yield strength 345 KG/M2, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer & emulsion paint two or more coat etc complete as per E-in-c.

Providing and fixing Z - purlins 2.0 mm thick with pre-painting etc complete

Providing and fixing precoated galvanised iron profile sheets (size,shape and pitch of corrugation as approved by Engineer-in-charge)0.50mm(+0.05%) total coated thickness with zine coating 120 grams per sqm as per IS:277, in 240 mpa Steel grade 5-7 microns epoxy primer on both side of hte sheet and polyester top coat 15-18 microns , sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single lenth upto 12 meter or as desired by engineer charge . the sheet shall be fixed using self drilling /self tapping screws of size (5.5X55 mm) with EPDM seal,complete upto any pitch in horizontal/vertical or curved surface ,excluding the cost of purities, refters and trusses and including to size and shape wherever reuired

Providing and fixing C-shape 2.0 mm thick with Pre painted including all fixtures and fitting etc complte as per E-in-C

Providing and fixing HT bolts with washers of different sizes as per fabrication drawings/details

Providing and fixing 2 mm thick polycorbonate sheets including all fixtures and fittings etc complete

Providing and fixing on wall face unplasticised rigid PVC rain water pipes 100 min dia conforming to IS:13592 type A, including jointing with seal ring conforming to IS:5382, leaveing 10 mm gap for thermal expansion including fixing of clips, bends/shoe etc complete as per direction or E-in-C

Providing and Fixing on roof TURBO Vent 600 dia with all Accerssories ,fitting etc complete as per direction of E-in-C