REPAIR / MAINT TO WOODEN FURNITURE IN ARMY AREA AT UDAIPUR MIL STN

Amount

Material and labourfor preparation of old polished wooden surfaces by scrapping and filling canties, if any, with filler/putty to achieve even and smooth surface , sand papered and applying coat(s) of french polish readymade of brand approved to the following furniture to acheieve uniform glossy finish to the entire satisfaction of Engineer-in-charge complete all as specified and directed .

(A)Ditto but polishing Peg Table -ditto-.

(B) Ditto but polishing Sofa set 4 seater -ditto-.

(C ) Ditto but polishing Sofa set 5 seater -ditto-.

(D) Ditto but polishing Table Writing -ditto-.

(E) Ditto but polishing Table Centre.

(F) Ditto but polishing Table Bed side .

(G) Ditto but polishing Table dinning 6/8 person.

(H) Ditto but polishing Table 3'x2' with drawer/without drawer -ditto-.

(J) Ditto but polishing Teapoy -ditto-.

(K) Ditto but polishing Side Board -ditto-.

(L) Ditto but polishing Table dressing ladies -ditto-.

(M) Ditto but polishing Table dressing gents -ditto-.

(N) Ditto but polishing Chair dinning with long back -ditto-.

(O) Ditto but polishing Bed Ply wood top

(P) Ditto but polishing Chair Dining -ditto-.

(Q) Ditto but polishing Chair Easy -ditto-.

(R ) Ditto but polishing Chair Writing -ditto-.

(S) Ditto but polishing Hat stand with mirror -ditto-.

(T) Ditto but polishing Chair wooden bottom -ditto-.

Material and labourfor replacement of old existing unserviceable wooden members of CHAIR DINING and supply and replacement of broken parts of wooden furniture by 1st class Hard wood(Teak wood) members well seasoned free from knots duly finished to match with existing finish, fabricated as per shape & size fixed with suitable size bamboo pins and fevicol including tightening of other joints as directed by Engineer -in-charge and shown in drawing.

(A) Front leg

(B) Rear leg

(C) Side rail with hole

(D) Front/back rail with hole

(E) Stiffener bottom

(F) Back rest made slightly curved in shape

Material and labourfor replacement of old existing unserviceable wooden members of Chair Writing and supply and replacement of broken parts of wooden furniture by 1st class Hard wood(Teak wood) members well seasoned free from knots duly finished to match with existing finish, fabricated as per shape & size fixed with suitable size bamboo pins and fevicol including tightening of other joints as directed by Engineer -in-charge and shown in drawing.

(A) Front leg

(B) Rear leg

(C) Side rail with hole

(D) Front/back rail with hole

(E) Stiffener bottom

(F) Back rest

(G) Arms

Material and labourfor replacement of old existing unserviceable wooden members of Chair easy and supply and replacement of broken parts of wooden furniture by 1st class Hard wood(Teak wood) members well seasoned free from knots duly finished to match with existing finish, fabricated as per shape & size fixed with suitable size bamboo pins and fevicol including tightening of other joints as directed by Engineer -in-charge and shown in drawing.

(A) Front leg

(B) Rear leg

(C) Front/Back frame with hole

(D) Hand rest

Material and labourfor replacement of old existing unserviceable wooden members of Chair Dining Officer and supply and replacement of broken parts of wooden furniture by 1st class Hard wood(Teak wood) members well seasoned free from knots duly finished to match with existing finish, fabricated as per shape & size fixed with suitable size bamboo pins and fevicol including tightening of other joints as directed by Engineer -in-charge and shown in drawing.

(A) Front leg

(B) Rear leg

(C) Side rail

(D) Front/back rail

(E) Stiffener bottom

(F) Back rest (TW Ver Strips)

Material and labourfor replacement of old existing unserviceable wooden members of Sofa set 4/5 seater and supply and replacement of broken parts of wooden furniture by 1st class Hard wood(Teak wood) members well seasoned free from knots duly finished to match with existing finish, fabricated as per shape & size fixed with suitable size bamboo pins and fevicol including tightening of other joints as directed by Engineer -in-charge and shown in drawing.

(A) Three Seater Front leg

(B)Three Seater Rear leg

(C )Three Seater Side rail

(D)Three SeaterFront /Back Rail

(E )Three Seater Front/Back Wooden Battens

(F) Three Seater Front/Back wooden Bearers

(G) Three Seater Hand rest

(H) Three Seater 12 mm ply for Back/Bottom

(J) Single Seater Front leg

(K)Single Seater Rear leg

(L)Single Seater Side rail

(M) Single SeaterFront /Back Rail

(N)Single Seater Front/Back Wooden Battens

(O) SingleSeater Front/Back wooden Bearers

(P) Single Seater Hand rest

(Q) Single seater 12 mm ply for Back/Bottom

Material and labourfor replacement of old existing unserviceable wooden members of Chair wooden bottom and supply and replacement of broken parts of wooden furniture by 1st class Hard wood(Teak wood) members well seasoned free from knots duly finished to match with existing finish, fabricated as per shape & size fixed with suitable size bamboo pins and fevicol including tightening of other joints as directed by Engineer -in-charge and shown in drawing.

(A) Front leg

(B) Rear leg

(C) Side rail

(D) Front/back rail

(E) Stiffener bottom

(F) Back rest

Removing old unserviceable plywood seat from Chair wooden bottom and Supply and fixing of new plywood seat of 6mm thick BWR quality ISI marked. complete all as specified in drawing and as directed by Engr-in charge.

Material and labourfor replacement of old existing unserviceable wooden members of Table Centre/2 tier and supply and replacement of broken parts of wooden furniture by 1st class Hard wood(Teak wood) members well seasoned free from knots duly finished to match with existing finish, fabricated as per shape & size fixed with suitable size bamboo pins and fevicol including tightening of other joints as directed by Engineer -in-charge and shown in drawing.

(A) Legs

(B) Long rail

(C) short rail

(D) Stiffeners

Material and labourfor replacement of old existing unserviceable wooden members of Peg Table and supply and replacement of broken parts of wooden furniture by 1st class Hard wood(Teak wood) members well seasoned free from knots duly finished to match with existing finish, fabricated as per shape & size fixed with suitable size bamboo pins and fevicol including tightening of other joints as directed by Engineer -in-charge and shown in drawing.

(A) Legs

(B) Long rail

(C) short rail

(D) Stiffeners

Material and labourfor replacement of old existing unserviceable wooden members of Teapoy wooden and supply and replacement of broken parts of wooden furniture by 1st class Hard wood(Teak wood) members well seasoned free from knots duly finished to match with existing finish, fabricated as per shape & size fixed with suitable size bamboo pins and fevicol including tightening of other joints as directed by Engineer -in-charge and shown in drawing.

(A) Legs

(B) Long rail

(C) short rail

(D) Stiffener

Material and labourfor replacement of old existing unserviceable wooden members of Table 3X2 without drawer and supply and replacement of broken parts of wooden furniture by 1st class Hard wood(Teak wood) members well seasoned free from knots duly finished to match with existing finish, fabricated as per shape & size fixed with suitable size bamboo pins and fevicol including tightening of other joints as directed by Engineer -in-charge and shown in drawing.

(A) Legs

(B) Long rail

(C) short rail

(D) Stiffener

Material and labourfor replacement of old existing unserviceable wooden members of Table 3X2 with drawer and supply and replacement of broken parts of wooden furniture by 1st class Hard wood(Teak wood) members well seasoned free from knots duly finished to match with existing finish, fabricated as per shape & size fixed with suitable size bamboo pins and fevicol including tightening of other joints as directed by Engineer -in-charge and shown in drawing.

(A) Legs

(B) Long rail

(D) Drawer with knob

(C) short rail

(E) Stiffener

Material and labourfor replacement of old existing unserviceable wooden members of Table dining 6/8 person and supply and replacement of broken parts of wooden furniture by 1st class Hard wood(Teak wood) members well seasoned free from knots duly finished to match with existing finish, fabricated as per shape & size fixed with suitable size bamboo pins and fevicol including tightening of other joints as directed by Engineer -in-charge and shown in drawing.

(A) Legs

(B) Long rail

(C) short rail

Removing old unserviceable & broken parts of Side Board and Supply of new parts of 18/19mm prelaminated particle board ISI marked phenol formaldehyde bonded including 4mm thick 1st class teak wood beading Complete all as specified & shown on drawing and as directed by Engr-in-charge.

(A) Top/Bottan

(B) Left/Right sides

(C) Drawers with knob

(D) Shelf

(E) Shutter door including piano hinge & Knob

(F) Teak Wood frame for botton

Supply and fixing of broken parts of Table writing by 18/19 mm thick commercial block board with 1 mm thick lamination sheet on one face duly finish fabricated as per existing shape and size, fixed with suitable size bamboo pins and fevicol including tightening of other joints if any complete all as per specified and shown in drawing and as directed by Engr-in-Charge:-

(A) Legs.

(B) Long rail.

(C) Short rail.

(D)18/19 mm thick commercial block board with 1 mm thick lamination sheet on one face for Right and left side of the box

(E) Drawer with knob.

(F) Back Side.

(G) Shutter / Door with one CB knob, two hinges and Shelf.

(H) Long stiffener.

(J) Short stiffener.

(K) 6 mm ply

Removing old unserviceable & broken parts of Table bed side and Supply of new parts of 18/19mm prelaminated particle board ISI marked phenol formaldehyde bonded including 4mm thick 1st class teak wood beading and all around 16 Gauge 20mm square conduit pipe . Complete all as specified & shown on drawing and as directed by Engr-in-charge.

(B) Bottom

(C) Shelf/Drawers

(D) Left/Right sides

(E) Conduit frame incl back side,front side

Removing old unserviceable & broken parts of Table bed side and Supply of new parts of 18/19mm prelaminated particle board ISI marked phenol formaldehyde bonded including 4mm thick 1st class teak wood beading Complete all as specified & shown on drawing and as directed by Engr-in-charge.

(B) Bottom

(E) Left/Right sides

Removing old unserviceable & broken back side of Table bed side and Supply of new back side of 6mm thick comercial plywood BWR quality ISI marked. Complete all as specified.

Removing old unserviceable plastic cane and Recanning of furniture with 2mm wide half-round cream/white colour plastic cane & 4 mm wide cane for closing the holes including removing old cane complete as specified and shown on drawing.

(A) Chair dinning

(B) Chair writing

(C) Chair easy

(D) Stool dressing CB

Removing old unserviceable parts of Table dressing ladies and Supply and fixing new parts of 18mm commercial block board BWR quality ISI marked laminated with 1mm thick lamination sheet, looking mirror of 5mm thick with 6mm thick back ply commercial type BWR quality ISI marked including 1st class TW frame all around the mirror.Complete all as specified & directed by Engr-in-charge.

(A) Top/ Bottom

(B) Sides

(C) Drawer with knob

(D) Looking mirror

(E) Back frame

(F) Back ply of mirror

(G) Sliding mirror

(H) Aluminium chennal for sliding mirror

(J) Back ply of box

Removing old unserviceable parts of Table dressing ladies and Supply and fixing new parts of 18mm commercial block board BWR quality ISI marked laminated with 1mm thick lamination sheet, looking mirror of 5mm thick with 6mm thick back ply commercial type BWR quality ISI marked including 1st class TW frame all around the mirror.Complete all as specified & directed by Engr-in-charge.

(A) Top/Side 18mm thk pre Laminated mdf as spec

(B) Bottom 12mm thk plywood

(C) Drawer with 50mm long 'D' shaped stainless steel handle as spec.

(D) 5mm thk electro copper plated mirror of plished sheet glass as specified

(E) TW 25X20 alround mirror frame

(F) 6mm thk ply wood back of mirror

(G) 1Nos per shutter stainless steel piano hinge as spec (02 Nos) Magnetic catcher with stainless (1 Nos)

(H) 75mm long 'D' shaped stainless steel handle

(J) 75mm foam 40 D cushion covered with leatherite as spec

(K) 12mm thk ply openable shutter

(L) 50mm Dia heavy duty revolving nylon double wheels

(M) Drawer Telescopic Channel

Removing old unserviceable parts of Hat Stand and supply and fixing new parts of 19mm thick particle board. 1.5 mm thick prelaminated teak face sheet, looking mirror of 5mm thick with 6mm thick back ply commercial type BWR quality ISI marked including 1st class TW frame all around the mirror complete all as specified and directed by Engr-in-Charge:-

(A) Looking mirror

(B) Back frame.

(C) Back ply of mirror.

(D) Hanging clips

(E) Clamps 4 nos

Material and labourfor replacement of old existing unserviceable wooden members of BED PLY WOOD TOP and supply and replacement of broken parts of wooden furniture by 1st class Hard wood(Teak wood) members well seasoned free from knots duly finished to match with existing finish, fabricated as per shape & size fixed with suitable size bamboo pins and fevicol including tightening of other joints as directed by Engineer -in-charge and shown in drawing.

(A) Long rail

(B) short legs from bed

(C ) stiffener

(D) one side teak face plywood fixed on foot board

(E) one side teak face plywood fixed on head board

(F) 12mm BWR thick ply wood top (Make:- Kit , National, Green)

Material and labourfor replacement of old existing unserviceable wooden members of BED HARD and supply and replacement of broken parts of wooden furniture by 1st class Hard wood(Teak wood) members well seasoned free from knots duly finished to match with existing finish, fabricated as per shape & size fixed with suitable size bamboo pins and fevicol including tightening of other joints as directed by Engineer -in-charge and shown in drawing.

(A) Long rail

(B) short legs from bed

(C ) stiffener

(D) Foot board as per drawing

(E) Head board as per drawing including 50 mm FOAM with 32 density

(F) 12 mm BWR thick ply wood top (Make:- Kit , National, Green)

Removing old unserviceable/missing hard pvc shoe from all types of wooden furniture articles and Supply and fixing new hard PVC shoe.Complete all as specified & shown on drawing and as directed by Engr-in-charge.

Removing old unserviceable top of following furniture articles and Supply and fixing of new top of 18mm thick prelaminated particle board ISI marked phenol formaldehyde bonded including 4 mm beading of 1st class Hard wood(Teak wood) (teak wood) all around the top and apply two coat of french polish to achive glossy finish complete all as specified in drawing and as directed by Engr-in-charge.

(A) Table centre/ 2 tier

(B) Table dining 6/8 person

(D) Teapoy wooden

(E) Peg table

(E) Table writing

(F) Table 3x2 with/witout drawer

Supply and fixing of wooden brackets triangular shaped and size 75X75mm of 1st class Teak wood and fixed to wooden Chairs by using screws & adhesive complete all as specified & directed by Engr-in-Charge.

Removing of old unserviceable Foam cushion and Supply and fixing new 100 mm thick synthetic cushion of 40 density cool foam for a seat or a back ,complete all as specified and directed Note:- (One Nos of seat or back shall be measured and paid as one unit). Make: Sleepwell/Courlon/Dunlop

Removing of old faded cushion cover only of a seat or back of SOFA SET 5 /4 SEATER and Supply and fixing new cover only for 100 mm thick cushion with tapestry cloth of good quality and shade as approved by GE. Note:-(One Nos of seat or back shall be measured and paid as one unit).

Removing of old/unserviceable and Supply and fixing new 4 x 10 mm thick RIBS moulded along with seat in single piece and PVC seat 4mm thick with holes & screwed with frame of CHAIR DINING JCO/OR'S of good quality as approved by AGE(I), complete all as specified and directed.

(A) Front leg

(B) Rear leg

(C) Side rail with hole

(D) Front/back rail with hole

(E) Stiffener bottom

(F) Arms

SNEH CORPORATION

M/S Tanisha Traders