Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.1 LAccepted-AOC 254 GOVT HOUSING COLONY CHANNAPORA SRINAGAR 190015 | SRINAGAR | SRINAGAR | JAMMU AND KASHMIR | 190015 | L1 | Accepted-AOC Being L1. | |
| 2 | L2₹16.0 L+₹12,336 (0.78%)Rejected-Finance AZAD COLONY B 90 FEET ROAD SOURA SRINAGAR J K 190011 | SRINAGAR | SRINAGAR | JAMMU AND KASHMIR | 190011 | L2 | Rejected-Finance Other than L1. | |
| 3 | L3₹19.2 L+₹3.3 L (21.0%)Rejected-Finance | L3 | Rejected-Finance Other than L1. | |
| 4 | L4₹19.9 L+₹4.0 L (25.5%)Rejected-Finance | L4 | Rejected-Finance Other than L1. | |
| 5 | Rejected-Technical | - | Rejected-Technical The firm has adverse remarks NO. |
Tender Value
₹21.9 L
EMD Value
₹43,780
Closing Date
28 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE, HQ 134 Wks Engrs
HQ 134 Wks Engrs PIN - 914134 c/o 56 APO
SPECIAL REPAIR/REPLACEMENT OF LT PANELS AT CERTAIN E/M INSTALLATION, EARTHING CABLES AND CONNECTED ITEMS AT TATTOO GROUND GE 970 EWS.
2022_MES_566976_2
134 WE-76(T)/2022-23
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
Srinagar
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE 970 EWS
₹43,780
Yes
12 Apr 2023
3 Feb 2023
3 Mar 2023
3 Feb 2023
28 Feb 2023
10 Feb 2023
Amount
Taking down old unserviceable LT UG cable including any short length and supply and laying underground LT cable XLPE insulated, heavy duty, armoured, sheathed 1100 Volts grade of cross sectional area 120 Sqmm, 3.5 Core with aluminium conductor, ISI marked as per IS : 7098 (Part-I) alongwith suitable size alumnium cable lugs and jointed in any description, complete all as specified and directed. Note :- Cost of aluminium cable lugs (eye lid/barrel/bottle neck type/ring type or any shape), cable gland, new nuts, bolts and washers of required size shall be deemed to includes in the quoted rates.
All as per Ser item No 1.00 here-in-above but of size 95 Sqmm 3.5 Core.
All as per Ser item No 1.00 here-in-above but of size 70 Sqmm 3.5 Core.
All as per Ser item No 1.00 here-in-above but of size 50 Sqmm 3.5 Core.
All as per Ser item No 1.00 here-in-above but of size 35 Sqmm 3.5 Core.
All as per Ser item No 1.00 here-in-above but of size 25 Sqmm 4 Core.
All as per Ser item No 1.00 here-in-above but of size 16 Sqmm 4 Core.
Excavation in trenches not exc 1.5 M wide and not exc 1.5 M in depth and getting out in any type of soil for taking up or laying of cable, complete all as specified and directed.
Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc. 25cm thick, complete all as specified and directed.
Removal of surplus soil to a distance not exc 50 mtr and deposited where directed at a level not exc 1.5 M above the starting point, complete all as specified and directed.
M&L for dry river sand as in cushioning to under ground electric cable on one layer of 8cm thick before laying the cable and 2nd layer of 15cm thick after laying the cable and stretching the cable, complete all as specified and directed by Engr-in-Charge. Note :- Punned thickness of sand shall be measured & paid.
Supply and laying sub class 'B' brick, old size as cable protection cover, laid dry, flat, transversally along the length of the cable, on sand cushioning, with width equal to the length of the brick, complete all as specified and directed by Engr-in-Charge.
S&F in replacement LT Control panel board, outdoor type, double door, pedastal mounted, overall size not less than 900mm x 900mm x 450mm, CPRI approved, IP-56, having independent compartment for bus bar, incoming feeder and each out going feeders, dust and vermin proof & lockable, factory made, fabricated out of 3mm thick CRCA sheet, suitable for 3 Phase 415 Volts 50 Hz, AC supply, bus bar chamber with copper bus bar of 400 Amps rating for 3 Phase and neutral, 4 wire system duly insulated with heat shrinkable type sleeveless as per colour code, supported on epoxy insulators - 01 set incl necessary copper cables of suitable size for MCCBs/MCBs/change over switch/inter connections, common earth bus bar of GI strip of size 32 x 6 mm at bottom with panel board at two earth terminals, cable glands with independent plates at bottom for each outgoing and incoming cables in cable alloy panel board and painted with powder coating in siemens grey colour and provision for the following incoming and outgoing accessories, complete all as approved and comprising as under:-
S&F in replacement LT Control panel board, outdoor type, double door, pedastal mounted, overall size not less than 1000mm x 900mm x 450mm, CPRI approved, IP-56, having independent compartment for bus bar, incoming feeder and each outgoing feeders, dust and vermin proof & lockable, factory made, fabricated out of 3 mm thick CRCA sheet, suitable for 3 Phase 415 Volts 50 Hz, AC supply, bus bar chamber with copper bus bar of 500 Amps rating for 3 Phase and neutral 4 wire system duly insulated with heat shrinkable type sleeveless as per colour code, supported on epoxy insulators - 01 set incl necessary copper cables of suitable size for MCCBs/MCBs/change over switch/inter connections, common earth bus bar of GI strip of size 32mm x 6 mm at bottom with panel board at two earth terminals, cable glands with independent plates at bottom for each outgoing and incoming cables in cable alloy panel board and painted with powder coating in siemens grey colour and provision for the following incoming and outgoing accessories, complete all as approved and comprising as under :-
S&F in replacement of LT Control panel board, outdoor type, double door, pedastal mounted, overall size not less than 900mm x 900mm x 450mm, CPRI approved, IP-56, having independent compartment for bus bar, incoming feeder and each outgoing feeders, dust and vermin proof & lockable, factory made, fabricated out of 3 mm thick CRCA sheet, suitable for 3 Phase 415 Volts 50 Hz, AC supply, bus bar chamber with copper bus bar of 600 Amps rating for 3 Phase and neutral, 4 wire system duly insulated with heat shrinkable type sleeveless as per colour code, supported on epoxy insulators - 01 set incl necessary copper cables of suitable size for MCCBs/MCBs/change over switch/inter connections, common earth bus bar of GI strip of size 32mm x 6 mm at bottom with panel board at two earth terminals, cable glands with independent plates at bottom for each outgoing and incoming cables in cable alloy panel board and painted with powder coating in siemens grey colour and provision for the following incoming and outgoing accessories, complete all as approved and comprising as under:-
S&F in replacement LT Control panel board, outdoor type, double door, pedastal mounted, overall size not less than 900mm x 900mm x 450 mm, CPRI approved, IP-56, having independent compartment for bus bar, incoming feeder and each outgoing feeders, dust and vermin proof & lockable, factory made, fabricated out of 3 mm thick CRCA sheet suitable for 3 Phase 415 Volts 50 Hz, AC supply, bus bar chamber with copper bus bar of 600 Amps rating for 3 Phase and neutral 4 wire system duly insulated with heat shrinkable type sleeveless as per colour code, supported on epoxy insulators - 01 set incl necessary copper cables of suitable size for MCCBs/MCBs/change over switch/inter connections, common earth bus bar of GI strip of size 32mm x 6mm at bottom with panel board at two earth terminals, cable glands with independent plates at bottom for each outgoing and incoming cables in cable alloy panel board and painted with powder coating in siemens grey colour and provision for the following incoming and outgoing accessories, complete all as approved and comprising as under:-
S&F in replacement LT Control panel board, outdoor type, double door, pedastal mounted, overall size not less than 900mm x 900mm x 450mm, CPRI approved, IP-56, having independent compartment for bus bar, incoming feeder and each outgoing feeders, dust and vermin proof & lockable, factory made, fabricated out of 3mm thick CRCA sheet, suitable for 3 Phase 415 Volts 50 Hz, AC supply, bus bar chamber with copper bus bar of 200 Amps rating for 3 Phase and neutral 4 wire system duly insulated with heat shrinkable type sleeveless as per colour code, supported on epoxy insulators - 01 set incl necessary copper cables of suitable size for MCCBs/MCBs/change over switch/inter connections, common earth bus bar of GI strip of size 32mm x 6 mm at bottom with panel board at two earth terminals, cable glands with independent plates at bottom for each outgoing and incoming cables in cable alloy panel board and painted with powder coating in siemens grey colour and provision for the following incoming and outgoing accessories, complete all as approved and comprising as under:-
S&F in replacement LT Control panel board, outdoor type, double door, pedastal mounted, overall size not less than 900mm x 900mm x 450mm, CPRI approved, IP-56, having independent compartment for bus bar, incoming feeder and each outgoing feeders, dust and vermin proof & lockable, factory made, fabricated out of 3mm thick CRCA sheet suitable for 3 Phase 415 Volts 50 Hz, AC supply, bus bar chamber with copper bus bar of 600 Amps rating for 3 Phase and neutral 4 wire system duly insulated with heat shrinkable type sleeveless as per colour code, supported on epoxy insulators - 01 set incl necessary copper cables of suitable size for MCCBs/MCBs/change over switch/inter connections, common earth bus bar of GI strip of size 32mm x 6 mm at bottom with panel board at two eath terminals, cable glands with independent plates at bottom for each outgoing and incoming cables in cable alloy panel board and painted with powder coating in siemens grey colour and provision for the following incoming and outgoing accessories, complete all as approved and comprising as under:-
S&F in replacement LT Control panel board, outdoor type, double door, pedastal mounted, overall size not less than 900mm x 900mm x 450mm, CPRI approved, IP-56, having independent compartment for bus bar, incoming feeder and each outgoing feeders, dust and vermin proof & lockable, factory made, fabricated out of 3 mm thick CRCA sheet suitable for 3 Phase 415 Volts 50 Hz, AC supply, bus bar chamber with copper bus bar of 300 Amps rating for 3 Phase and neutral 4 wire system duly insulated with heat shrinkable type sleeveless as per colour code, supported on epoxy insulators - 01 set incl necessary copper cables of suitable size for MCCBs/MCBs/change over switch/inter connections, common earth bus bar of GI strip of size 32mm x 6 mm at bottom with panel board at two eath terminals, cable glands with independent plates at bottom for each outgoing and incoming cables in cable alloy panel board and painted with powder coating in siemens grey colour and provision for the following incoming and outgoing accessories, complete all as approved and comprising as under:-
Notes for Ser item Nos 13 to 19- (a) New MCCBs/Change over switches shall be measured and paid seperatly under relevant items of schedule 'A'/BOQ. (b) Rate for interconnecting copper control cable alongwith necssary copper lugs shall be included in the quoted rates. (c) The dimensions of panel given in the schedules are approximate size only. The contractor should obtain necessary approval/layout/general arrangement/drawing for panel form Engr-in-Charge prior to commencement of work. (d) Cost for connecting of existing old UG cable of any size/type to new incoming/outgoing terminals by cutting the required length, addtn/altn and provision of necessary cable lugs, glands, nuts, bolts and washers etc shall be included in the quoted rates.
S&F in replacement MCCB 4 Pole, current rating 315/400 Amps, adjustable over load and short circuit with Microprocessor release setting, breaking capacity 35/36 KA (As decided by Engr-in-Charge) at 415V, 50Hz including necessary spreaders/cable lugs, nuts, bolts and washers if required, complete all as specified and directed. Make :- L&T/Legrand/Schenedier.
S&F in replacement MCCB 4 Pole, current rating 200/250 Amps, adjustable over load and short circuit with Microprocessor release setting, breaking capacity 25/35/36 KA (As decided by Engr-in-Charge) at 415V, 50Hz including necessary spreaders/cable lugs, nuts, bolts and washers if required, complete all as specified and directed. Make :- L&T/Legrand/Schenedier.
S&F in replacement MCCB 4 Pole, current rating 100/160 Amps, adjustable over load and short circuit with Microprocessor release setting, breaking capacity 25/35 KA (As decided by Engr-in-Charge) at 415V, 50Hz including necessary spreaders/cable lugs, nuts, bolts and washers if required, complete all as specified and directed. Make :- L&T/Legrand/Schenedier.
S&F in replacement MCCB 3 Pole, current rating 40 Amps, adjustable over load and short circuit with Micro processor release setting, breaking capacity 36 KA at 415V, 50Hz including necessary spreaders/cable lugs, nuts, bolts and washers if required, complete all as specified and directed. Make :- L&T Cat Part No Cat Part No CM92154OOOOX1 or Techno commercially equivalent make of Legrand/Schenedier.
S&F in replacement 4 pole on load manual operated changeover switch, disconnector in open execution with steel sheet enclosure of current rating 250 Amps, complete all as specified and directed. Make :- L&T Cat Part No Cat Part No CO32500OSOO or Techno commercially equivalent make of Legrand/Schenedier.
S&F in replacement 4 pole on load manual operated changeover switch, disconnector in open execution with steel sheet enclosure of current rating 200 Amps, complete all as specified and directed. Make :- L&T Cat Part No Cat Part No CO32000OSOO or Techno commercially equivalent make of Legrand/Schenedier.
M&L for earthing complete with galvanised steel earth plate electrode of size 600mmx600mmx6mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) connected to GI strip of size 32mm x 6mm by means of nuts and bolts, check nuts and washers of GI and connected to earthing test point and earth dolly all as shown in electrical plate No 3 of MES SSR part I, testing on completion including necessary excavation and earth work in any type of soil, PCC(1:3:6) chamber, 50mm thick PCC 1:2:4 chamber cover with 8mm dia mild steel TMT reinforcement of 10cm c/c spacing both ways, watering arrangement shall be made with GI pipe light grade of 20mm bore incuding funnel and wire mesh and protection to earth lead shall be provided with GI pipe light grade grade, 40mm bore upto 7.5 from the earth plate, electrode & refilling of soil etc including necessary excavation & earth work in any strata and PCC chamber, complete all as specified and directed by Engr-in-Charge and testing after completion.
Supply, fixing or laying in trenches /on walls/poles/structures 50mm bore GI tubing light grade for road crossing for cable protection including necessary suitable size MS flat fixing clamps, fixing screws and including taking up or down old existing pipe, complete all as specified and directed.
All as per Ser Item No 28.00 here-in-above but 40mm bore GI pipe.
FG CONSTRUCTION
YATTOO ENTERPRISES
CHINAR CONSTRUCTION TRADERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .