PROVN OF RAIN WATER HARVESTING AND ARBORICULTURE AT HQ RTG, ADDL ALTN OF BLDG NO P-75 AND RENOVATION OF FLOORING IN BLDG NO P-186 AND P-206 OF HQ MB AREA AND CERTAIN REV AND MINOR WORKS IN THE AREA OF AGE B/R-I UNDER GE WEST JABALPUR

Amount

Excavation over areas, n exc 1.5m deep & getting out in any type of soil

Excavation over areas, exc 1.5m but n exc 3.0m deep & getting out in any type of soil

Excavation in trenches in soft/ loose soil not exceeding 1.5 m wide and not exceeding 1.5 m in depth and getting complete.

Returning, filling in, including spreading, levelling, watering & well ramming in layers n. exc 25 cm in soft/loose soil.

Removing surplus excavated earth (soil) to a distance not exceeding 50 mtr

M&L PCC in foundations, filling and mass-concrete type C2 (1:3:6) using 40 mm graded stone aggregate

M&L for Brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM (1:4)

M & L 10 mm thick rendering in cement mortar (1:6) in on fair faces of brick or concrete surfacecomplete.

M & L loose shingle filling in trenches or RWH, gravel 5 to 10mm size , incuding spreading , levelling complete all as specified.

M & L for loose filling of Hard core of guage exc. 63mm but n. exc 100mm, deposited, spread and levelled in RWH or trenches complete all as specified.

M&L for loose Sand filling in trenches or RWH pit and levelled complete.

PCC 1:2:4 B-0 in coping including necessary formwork complete all as specified and directed .

S&F for framed work such as grill grating etc with ends of bar shouldered and riveted or forged into spikes framed guard bars barred iron doors walkways railing etc.

S&f for welded steel wire fabric including cutting straightning and welding to steel members complete.

M&L for drilling of bore hole 300 mm dia and 10m depth for fixing of casing pipes, complete all as specified and directed.

S&F 200mm dia plain/Perforated UPVC Pipe single socketed in any length fixed in bore hole complete all as specified & as directed

S&F PVC Bail Plug suitable for 200mm dia PVC Pipe fixed at bottom in bore hole complete all as specified & as directed

S&F PVC Cap suitable for 200mm dia PVC Pipe fixed at Top in bore hole complete all as specified & as directed

Supply only of Compost manure incl loading unlaoding & transportation & stacking at site complete . The compost shall be of uniform texture relatively dry of dark brown or black color & should have an non offensive earth like odour. It shall be nutrient rich soil like material created by the biological decomposition of organic material such as vegetative debris & live stock manure. (The net measurement of the compost manure shall be arrived at by reducing the actual stack measurements by 8%).

Supply only of good earth (sand) from outside MD Land free from kankar, stones, cobbles,Moorum, shingle, Rocks building rubbish etc of all kinds & suitable foragricultuer/arboricultuer purpose. The ph of the soil brought shall be of the range 6 to 8.50. (The net measurement of the compost manure shall be arrived at by reducing the actual stack measurements by 20%).

Supply & planting of trees at desired distances in rows or other patterns to provide a green cover to the area and maintain green till handover to the user . Planting stages are as under :

(a) Excavating pits of size 75 cm dia & depth 75-80 cm taking out the soil & keeping aside .

(b) Removing the stones, cobbles, boulders, vegetation etc from the excavated soil & mixing the balance excavated earth with a mixture of good earth & compost manure( Supplied vide item no 4 & 1 above) mixed @ 4:1 & filling the mixture so obtained in layers in the excavated post hole aroud the sapling Together with watering & supporting the plant/tree sapling with a bamboo /wooden stake & tieing with two ties all as directed for the following tree/plants

Bottle Palm tree ( ht 2.00 m when planted)

Supply & planting of shrubs/hedges & climber plants at desired distances in rows or other patterns to provide a green cover to the area in the following stages.

(a) Excavating pits of size 45 cm dia & depth 45 cm taking out the soil & keeping aside .

(b) Removing the stones, cobbles, boulders, vegetation etc from the excavated soil & mixing the balance excavated earth with a mixture of good earth & compost manure( Supplied vide item no 4 & 1 above) mixed @ 4:1 & filling the mixture so obtained in layers in the excavated post hole around the sapling together with watering & supporting the plant/tree sapling with a bamboo /wooden stake & tieing with two ties all as directed for the following shrubs /hedge/climbers

Hedge Golden Duranta ( Ht 60 cm when planted)

Cycus revoluta ( Ht 45-60 cm when planted)

Trenching in ordinary soil upto a depth of 50 cm & removal of the excavated soil to a distance of 50 m , stacking the same & seperating the serviceable material by sieving out carefully & removing all kankar, stones, cobbles, Moorum, shingle, Rocks building rubbish etc of all kinds . Mixing the remaining soil with good earth & compost ( supplied vide item No 1& 4 above) spreading and neatly levelling with in a lead of 50m and making up the trenched area to a proper levels. Finally flooding the area with ample qty of water complete.

M& L for grassing the area Grassing with Cynadon Dactylon ( Callcatta Grass)having rhizomes with sufficient nodes in rows of 5 cm apart in either direction & watering , maintenance of the lawn till the grass forms a thick lawn free from weeds & fit for mowing incl spreading of good earth & compost

Taking down cement plaster on brick/ stone masonary including raking out joints, hacking for scrubbing down with water etc. complete all as specified and as directed.

Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing ) removing rubbish outside MD land complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and pavings n exc 15 cm thickness (below or above ground level) complete .

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc. complete all as specified and directed.

M&L for 25 mm thick plain cement concrete 1:2:4 type B-1 (using 20mm graded stone agg) as in base finishing the surface even and smooth complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 600mmX300mm or 450 x 300 x 6 to 7 mm,450x350 or 350x250 6 to 7mm thick on vertical surface such as skirting/dado etc. ,set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile with & including rendering 10 mm thick cement plaster in cement mortar 1:4 finished rough to fix tiles complete all as specified and directed (Make: Premium quality of Kajaria or equivalent quality approved by GE).

M&L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in Cement mortar 1:4 complete all as specified and directed.

M&L for rendering 15mm thick on brick work or concrete surface in CM 1:6 finished fair& even surface complete all as specified and directed.

S& F for 63x51 mm thick WPC frame for fixing of WPC partition board for partition as per specification & drawing complete all as specified and directed.

S&F, Factory Made Solid for 30 mm thick WPC BOARD of desired pattern for partition of supplying & fixing in frame at site as per specification & drawing complete all as specified and directed .

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F 100 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed.

S&F 150 mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F in repair 125mm/ 150mm dia mild steel chromium plated grating fixed on floor trap / nahni trap in Cement mortar 1:6 , all as specified and directed by Engr-in-charge.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceedeing 0.11 sqm but n.exc 0.18 sqm, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls by complete removal of existing treatment and applying two coat of oil bound distemper (oil emulsion) over 2mm thick birla wall care putty over a coat of chalk whitining on walls complete all as specified and directed.

Supply & Fixed for ceramic wash hand counter top basin white colour of size 700X460mmX200mm Cat No.ALS-WHT-85601 ALIVE range of Make: Jaquar or equivalent quality make approved by GE complete all as specified and directed.

S & F 3 mm thick figured glass pin head type and glazing with oil putty/wooden beads in squares n exc 0.5 Sqm in each pane etc complete all as specified and directed.

M&L for preparing new plastered or un-plastered surfaces of walls and applying two coats of oil bound distemper with 2mm thick wall care putty over a coat of chalk whitining on walls complete all as specified and directed.

Preparation of old surfaces of ceiling and applying two coats of white wash complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as steps, cooking platform, and other similar situations complete all as specified and directed.

M&L for providing Machine cut Cudapph stone slab as on platform/shelf 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

S&F aluminium alloy anodized sliding door bolt with hasp, staples (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts or extruded sections or cast aluminium alloy length of bolt 250mm complete all as specified and directed by Engr-in-charge.

M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming Fe-410-(Gde E-250) quality B complete all as specified and directed.

M&L, Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails fixed with angle cleats or other connecting plates complete all as specified and directed.

S&F, Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick mangalore pattern of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding/ ridge to wall, fixed with self tapping screws complete all as specified and directed.

S&F MS wind ties for roof including securing bolts; including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate in copings, kerbs, and the like all as directed incl necessary form work complete all as specified and directed.

M&L Rendering 15mm thick in Cement Mortar 1:4 on Fair Faces of Brick Walls or on Concrete Surfaces plastered Surfaces Finished fair and even complete all as specified and directed.

M&L for suspended false ceiling system using chicago metallic (E grid) exposed supended system, grid section size 600mm X 600mm comprising of GI powder coated Main Runner of dimensions 39 mm X 24mm X 0.8mm thick (thickness comprising of GI/0.4+ PPPCGS/0.3mm & weight of runner 1.35 kg for 3600mm length) Cross Tee of dimensions 29mm X24mmX0.8mm thick and thick wall angle 22.2mmX22.2mmX 0.65 mm thick ( thickness comprising of GI/0.35+ PPPCGS/0.3mm & weight of angle 0.70 kg for 3050mm length) with and including 4mm thick HPSC(High pressure steam cured) pre-primed , self embossed . textured designer board, water resistant termite resistant , fire resistant for insulation and acoustic purpose to be placed in the grid system duly suspended with 4mm dia GI bar hangers fixed with steel dash through fasteners from purlins of the roof with butterfly clips(Wt-0.007 Kg/clip)hold down clips (Wt-0.0035 Kg/clip) with Provn of light fixture complete all as specified and directed. Make :- ARMSTRONG AND EVEREST or other equivalent as approved.

M&L for 50 mm thick cement concrete type B-1, 1:2:4 using 20mm graded stone aggregate as in floor complete all as specified and directed.

M&L, Cement concrete 1:3:6 type C2 using 40mm graded stone aggregate, 75 mm thick in plinth protection laid in panels and finished even and fair including necessary form work complete all as specified and directed.

S& F for Solid PVC moulded door frame of size 50mm x 95mm made out of 5mm Plain colour PVC sheet reinforced with M.S. tube, suppling & fixing in opening but single prelam PVC sheet used instead of Plain colour PVC sheet as per specification & drawing complete all as specified and directed.

S&F, Factory Made Solid PVC Moulded Door Shutters with wood free EPS 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face with particle board core, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

Cutting holes in brick walls, Exc. half brick but not exc. one brick in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed.

S&F for aluminium anodised, barrel tower bolts of extruded section with length of bolt 100 mm and fixed complete all as specified and directed.

S&F for extruded aluminium alloy handles, fabricated type, anodised of size 100 mm complete all as specified and directed.

M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty in square n,exc 0.5Sqm in each pane complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of white cement as primer complete all as specified and directed.

M&L for prepartion of new steel surfaces of any description not other described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed

M & L Granite (Black/Ruby Red ) work (table rubbed and polished) 20 mm thick in cooking platforms bedded and jointed with grey cement slurry and pointed to match the shade of granite stone including grinding and polishing complete over and including screed bed 15 mm thick in CM 1 : 6 complete all as specified and directed.

S&F rotational molded polyethylene water storage tanks (cylindrical vertical with closed top) capacity 500 Ltr hoisted and fixed in position all as specified and directed by Engr-in-charge.

S&F 25mm bore tubes medium grade galvanized with all fitting such as socket, elbow, Tee tee, union and short length etc. and fixed complete to walls and ceilings or laid in floors of any length all as specified and directed by Engr-in-charge.

S&F 15mm bore tubes medium grade galvanized with all fitting such as socket, elbow, Tee tee, union and short length etc. and fixed complete to walls and ceilings or laid in floors of any length all as specified and directed by Engr-in-charge.

S&F 20mm bore tubes medium grade galvanized with all fitting such as socket, elbow, Tee tee, union and short length etc. and fixed complete to walls and ceilings or laid in floors of any length all as specified and directed by Engr-in-charge.

S&F, PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, laid in trenches or in walls complete all as specified and directed.

S&F, in repair PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, laid in trenches or in walls complete all as specified and directed.

S&F PVC (SWR) bends ISI marked any radius of 110 mm bore with access door complete all as specified and directed.

S&F PVC (SWR) bends ISI marked any radius of 75 mm bore with access door complete all as specified and directed.

S&F PVC low level flushing cistern of capacity 10 litres complete with siphon handle, lever, float valve and PVC bend including connecting to ITWC/ ETWC, PVC connection 450 mm long and fixing on wall bracket complete all as specified and directed by Engr-in-charge.

S&F 125mm/ 150mm dia mild steel chromium plated grating fixed on floor trap / nahni trap in Cement mortar 1:6 , all as specified and directed by Engr-in-charge.

S&F vitreous china squatting pan white orissa pattern size 580 x 440mm with integral foot rests (excludig flushing cistern & flush pipe) with cast iron trap portion to match with the existing surface of floor all as specified and directed by Engr-in-charge.

S&F vitreous china wash basin white flat back size 550 x 400mm excluding taps, waste, chain & plug and porcelain stopper but including brackets, PVC connections 450 mm long all as specified and directed by Engr-in-charge.

S&F 15mm bore bib tap fancy type chromium plated cast copper alloy screwed down for iron pipes or for brass ferrule complete all as specified and directed by Engr-in-charge.

S&F 15mm bore pillar taps cast copper alloy fancy type chromium plated screwed down high pressure with or without lattered HOT or COLD with long screwed shanks and fly nuts screwed for iron pipes, att as directed Engr-in-Charge.

S&F15mm bore stop valve/ angle valve fancy type chromium plated cast copper alloy screwed down high pressure screwed both ends for iron pipe or for union all as specified and directed by Engr-in-charge.

Surface excavation n.exc not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft /loose soil.

M & L Machine pressed coloured precast concrete rubbber moulded interlocking paver block any shape and size conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade.

M & L for 50 mm thick Sand filling below the interlocking paver block including watering and consolidation complete all as specified and as directed

S&F Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed by Engre-in-charge.

M&L Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed by engre-in-charge.

Supply only chain link fencing galvanised iron hot dipped including fixed with mild steel fillets of any mesh, size and type to any type of standards, rails, straining bolts including provision of binding wire or steel clips complete all as specified & directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire

Basket ball poles of standard size made of 200 mm dia medium grade MS pipe with 8 mm thick base plate and 6 mm thick connecting plates at the top to fix fibre glass board including necessary cutting, drilling hole, welding etc complete incl two coats of synthetic enamel paint over a coat of primer complete all as specified and directed by Engineer-in-Charge and as shown on drawings.

Cement concrete (1:4:8) type D-2,using 40 mm graded stone aggregate as in flooring 150 mm thick complete all as specified and directed by Engineer-in-Charge.

Cement concrete (1:2:4) type B-1,using 20 mm graded stone aggregate as in flooring 100 mm thick and finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade `A', 100mm thick slab, complete all as specified and directed by Engineer-in-Charge.

Forming Construction joint 30mm deep x 10mm wide filled with sealing compound, Grade 'A', complete all as specified and directed by Engineer-in-Charge.

Preparing concrete surface of floor and applying two coats of floor paint exterior grade over a coat of primer of approved shade/tint complete all as specified and directed by Engineer-in-Charge.

M&L for rendering on fair faces of brick work or concrete surface of wall 15mm thick in CM 1:4 with WPC and to be finished even and smooth without using extra cement complete all as specified and directed ( WPC compound shall be measured and paid separetely)

Supply only Integral water proofing compound complete

M&L for 100 mm thick Cement concrete type D-2, 1:4:8 , using 40 mm graded stone aggregate as in sub base.

Plain cement concrete (1:4:8) type D-2 using 40 mm graded stone agg as in foundation filling and mass concrete all as specified.

PCC 1:3:6 type C-2 as in surface channels and drains complete spd & directed.

Extra for forming fair finished drains or channels 30 cm inner girth in cement concrete using extra cement including forms moulds, mitered/ stopped ends complete all as specified.

Taking down chowkats or frames with shutters (without taking off shutter from the frames) exc. 1.5 sq.m but not exc. 4 sq.m each complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sqm each complete all as specified and directed.

Taking up or down steel tubing and connections for 15mm bore of pipe complete all as specified and directed.

Taking up or down steel tubing and connections for 20mm bore of pipe complete all as specified and directed.

Taking up or down steel tubing and connections for 25mm bore of pipe complete all as specified and directed.

M&L for Vitriefied ceramic tiles 10mm thick DARK SHADE(square/rectangular) polished area of each tiles not exceeding 0.36 sqm including 15mm thick screed bedding layer in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile complete all as specified

M&L for Brick work with old size, sub class 'B' bricks, straight or curved on plan any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed.

Cutting chases, pinning in. through brick walls and making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.

S & F in repair anodised powder coated aluminium door shutter ,windows ,ventilators with one or more rebates including with one or more rebates incl joining cleats clips, fixing etc completed all as specified and directed.

M & L, aluminium grills(Decogrill) and fixed including necessary glazing clips, anodized aluminiunm snap beading screws and aluminium fittings complete all as specified and directed.

Supply & Fixed in repairs chromium plated single lever wall mixer 3-in-1 with connector for hand shower arrangement with connecting legs, wall flannges and wall brackets for hand shower (code CQT-23267 of Jaquar make or equivalent make as approved by GE complete as specified and as directed.

S&F for stainless steel chromium plated single lever basin mixermake approved by GE including all necessary fittings comlete all as specified and directed.

Supply & Fixed in repair for Towel Ring complete all as specified and directed.

Supply and fixing in repairs Wall hung wc with UF soft close seat cover, hinges, accessories set, size 385 X 595 X 385mm including all fittings complete all as specified and directed.

Supply and fixing of single piece slim concealed flushing cistern with wall mounting frame , installation kit and "S-type drain pipe connection set for wall hung Wc including all fittings complete all as specified and directed.

Supply and fixing of flush control plate for concealed flushing cistern including all fittings complete all as specified and directed.

Supply and fixing of metropole flush valves dual flow 32mm size ( concealed body) with exposed shut off provision and 100mm square plate (3.0 / 6.0 ltr per flushing ) including control cock and operating lever including all fittings complete all as specified and directed.

Supply & Fixed in repairs Towel Rail 600mm long stainless steel complete all as specified and as directed.

Supply & fixed in repair for Towel Rack 600mm long with lower hangers complete all as specified and directed.

S&F in repair, chromium plated, Soap dish holder complete all as specified and directed. complete all as specified and directed.

Supply & Fixed 12mm thick frosted glass fitted to walls (or aluminium frame) as partiotion in toilets with necessary arrangements complete all as specified and directed.

Supply & Fixed in repairs for 15 mm bore concealed Stop valves, complete all as specified and directed.

Supply & Fixing 'in repair' 18 mm thick, PVC sheet one side prelaminated of approved texture ("Celuca ply of Rajshree make or equivalent in "Sintex" as approved by GE ) as in Kitchen cabinet, Cupboard etc., (withshelves and partitions) including necessary fitting & fixture as per manuacturer's instructions complete all as specified & directed.

S&F Handles of senso (as per 3D designs) 150 mm inclduding all connection fitting as complete all as specified and directed and approved by GE.

S&F in repair stainless steel hinges for cupboards of senso (as per 3D designs) inclduding all connection fitting as complete all as specified and directed and approved by GE.

Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors for 16mm (outer dia) bore of pipe including Brass elbow, Brass Tee, Male threaded brass adaptor, Female threaded brass adaptor and all necessary fittings etc complete all as specified and directed.

Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors for 20mm (outer dia) bore of pipe including Brass elbow, Brass Tee, Male threaded brass adaptor, Female threaded brass adaptor and all necessary fittings etc complete all as specified and directed.

Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors for 25mm bore (outer dia) of pipe including Brass elbow, Brass Tee, Male threaded brass adaptor, Female threaded brass adaptor and all necessary fittings etc complete all as specified and directed.

Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors for 32mm bore (outer dia) of pipe including Brass elbow, Brass Tee, Male threaded brass adaptor, Female threaded brass adaptor and all necessary fittings etc complete all as specified and directed.

S&F in repair PVC (SWR) floor trap, plain with grating including jointing with solvent cement of 75mm dia complete all as specified and directed.

S&F for looking mirror of size 5feet X 3.5feet with designer glass and frame to be fitted with wall including all necessary arrangements and fittings complete all as specified and directed. Make: Saint Gobain or equivalent approved by GE.

S & F Bathtub Size: 6/3 Acrylic Bath Tub Thickness : 8-10 mm Depth 18-20*inch Po-up Best Front panel Panel Headrest 1nos Massages Big Jets 6nos Spaniel jets 2nos Jacuzzi motor 1.5HP (adder, Made in German) LED Light 1nos NCB for electric protection Full SS Stand Adjustable Bubble Presser Controller Filler system Hand Shower Tap Hot & cold Mixture, Bubble Bath Air Jets 12nos Blower Pump,Digital Control Panel

Supply and fixing of wall to wall shower enclosure with two fixed glass and openable door in between-3 part made up of 8mmthick glass and chrome finish including handles and all fixing arrangements height of glass closure is 1950mm and width 2401mm-2800mm complete all as specified and directed.

Supply and fixing shower panel (Size 1600 X 230mm) of chrome plated stainless steel finish, anti finger print, movable ABS top shower, brass waterfall, movable ABS body massage jets, chrome plated ABS hand shower, brass spout, brass faucet body with thermostat mixer, multi function water diverter for top shower, water fall, hand shower body jets, spout, 40cm stainless steel braided hose, 1.50mtr stainless steel double locked flexible hoses including all fixing arrangements complete all as specified and directed.

Dismantiling fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in sectionin any position incl taking out nut and bolt etc to replace decayed portion.

Dismantling boarding/ wooden floor , any description, fixed in any position with nails

S & F 25 mm thick 1 st class hardwood Planed one side & edges tongued and grooved or rebated, and ditto (boarding) as in flooring inluding clean saw Fist class soft-wood in scantlings (pine wood bearers) size 70 x 45mm @ 900 mm c/c and 3 mm thick Rubber cushion and applying french polish to wooden floor

Preparation of old decorated surfaces of Wall and applying two coat of plastic emulsion paint over a coat of wall care putty complete all as specified and directed.

Preparation of old decorated surfaces of ceiling and applying two coat of plastic emulsion paint over a coat of wall care putty complete all as specified and directed.

Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of following types (a) Makrana white

M & L for Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

S&F, Aluminium anodised sections for doors/windows/ventilators with one or more rebates including joining cleat for fixing etc complete with frames, shutters and grills of size directed by Engineer-in-charge including handles, tower bolts, grills, etc complete all as specified and directed. Note:- Floor door spring, sheet glass, wire cloth, lock, etc shall be measured and paid seperately.

2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed.

S & F 35 mm thick flush shutters solid core construction with block board core and plywood face panels, commercial type on both sides supplied and fitted to chowkats complete all as specified and directed.

M&L for prepartion Surfaces of new wood or wood based materials of any description not other described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed

M&L, Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails fixed with angle cleats or other connecting plates complete all as specified and directed.

M & L for RCC 1:2:4 type B1 nominal mix using 20mm graded stone aggregate in lintel beams/roof beam cantilevers, bressummers, lintels over 1.5m span

M&L for Formwork to rough finished surfaces of sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

All as per item No. 162 here-in-before but 5 mm dia & over upto and including 10 mm dia bars as in stirrups, spacers etc.

M&L, Non-skid digital coloured ceramic tiles 7 to 8 mm thick (square/rectangular), area of each tiles exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set & jointed in net cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM 1:6 complete as specified and directed.

S&F in repair, cast iron nahani trap, with chromium plated grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4), dia of outlet 100mm complete all as specified and directed.

S&F, in repair, vitreous china rimless single piece WC with with UF soft close seat cover , hinges accessories set as per Make Jaquar cat Part No VGS-WHT-81853S300UF (including fixing bolts but e flushing cistern and flush pipe) complete all as specified and directed.

Supply & fixing 32mm, waste fittings, brass chromium plated for glazed ware sink, basins, etc. with long screw shanks and fly nuts, flange end bedded in red lead cement and other end fixed as per Make Jaquar cat Part No ALD CHR 705L 130 complete all as specified and directed.

S&F , in repair, PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S & F PVC waste pipe 32mm bore of size 750mm to 900mm long complete all as specified and directed.

S&F in repair 8mm dia brass, chromium plated health faucet (Hand shower) with 01 meter long flexible tube and wall hook. Make : Jaquar Cat No - ALD-573 or equivalent as approved by GE, complete all as specified and directed.

S&F, in repair, Angular stop valves,, fancy type, chromium plated with long shank and cup, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes or for unions of 15mm bore with flange Make Jaquar Cat part No OPP CHR 15053PM for geyser complete all as specified and directed.

S&F, in repair, two way bib cock fancy type, chromium plated with high pressure, of 15mm bore with flange Make Jaquar Cat part No OPP CHR 15041PM for WC point complete all as specified and directed.

S&F in repair brass chromium plated bottle trap 32mm bore for wash hand basin with inlet & outlet screwed for pipes or connection incl necessary packing union and cap complete all as specified and directed by Engr-in-charge.

Supply and fixing of metropole flush valves dual flow 32mm size ( concealed body) with exposed shut off provision and 100mm square plate (3.0 / 6.0 ltr per flushing ) including control cock and operating lever of Make : Jaquar (Model : FLV- 1089SQ) including all fittings complete all as specified and directed.

S&F in repairs, brass chromium plated single lever consealed diverter mixer 3 in 1 system with provision of both over head shower and hand shower with 115 mm long bend pipe connecting legs and wall flange (without hand and over head shower Make - Cat No. OPPCHR 15079KPM , ALDCHR 079 body of canceled diverter and bath tab spout cat part No SPJ CHR 15463PM of Jaquar or equivalent complete all as specifed and directed.

S&F in repairs, hand shower sizes 65x95mm rectangular shape singel flow with rubite cleaning system face plate stainless steel and ABS body in chrome finished ) with 1.5 meter long flexible tube with nut and premium wall braket for hand shower 35mm dia and 100mm long round shape complete all as specified and directed. Make : Jaquar or equivlanet (Code No. HSH CHR 1729 , CHR 549D12 AND SHA CHR 555ALD-CHR-555).

S&F, in repair, chromium plated, Toilet paper holder complete all as specified and directed. As per Cat No ACN -1153N of Make : Jaquar or equivalent as approved by GE from the makes mentioned in Appx 'C'.

S&F Soap dispenser automatic capacity 0.8 ltr material AISI aluminium/ABS (Absolute Butadin steren Jaquar Cat Part No HDR SDR BLC DJ0160AT pecified and direcrted Make : 3 or equivalent as approved by GE.

S&F in repair tumbler holder as per Cat No ACN -1141N of Make Jaquar or equivalent Make as approved by GE from Appendix 'C'.

S&F in repair Towel ring round with round flange complete . As per Cat No ACN-1121BN of Make Jaquar or equivalent Make as approved by GE from Appendix 'C'.

S&F, in repair, CP, soap dish holder complete all as specified and directed. Make : Jaquar Cat No - ACN-1131N or equivalent as approved by GE.

S&F in repair glass corner complete all as specified and direcrted Make : Cera Cat Part No CA 503 or equivalent as approved by GE.

S&F, in repairs, brass, chromium plated tubular towel rack 20mm dia 60cm long between flanges Make : Jaquar Cat No ACN CHR 1181S or equivalent as specified and directed.

S&F, in repair, glass shelf with CP brackets and with decorative railing fixed to wall complete all as specified and directed. As per Cat No ACN -1173 of Make : Jaquar or equivalent as approved by GE.

S&F, in repair, PVC Bath Cabinet made from hard thermosetting material with mirror, white/ivory colour, 400 x 500mm size. As per Cat No. 554 of Make Prayag or equivalent Make as approved by GE from Appendix 'C'.

S&F, in repair, jet spray with 1m PVC tube (stainless steel), chromium plated for vitreous china padestal pattern water closet complete all as specified and directed. Make-Jaquar Essco(Cat No - ALE -547) or equivalent as approved by GE.

M&L for 5 mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed.

M&L for Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed.

M&L for malamine polishing on wooden surfaces in vertical surface of any description, width or girth including cleaning and preparing the surfaces including a coat of wood filler on old works with one or more coats on old work etc complete all as specified and directed.

S & F coloured PVC insulation panels 7-8 mm thick cell type of 1mm plain PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S as per as per manucaturer intruction specification and drawing ( rates are inclusive of necessary frame work) complete all as specified and directed

12 mm thick Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required including packing with rubber gasket fixing in aluminium frame

Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers

M&L for floor door spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed to aluminium door etc. complete all as specified and directed.

S&F in repair Mortice lock,vertical type size 100 mm 4 lever suitable for aluminium door including fixing with stainless steel screw as complete all as specified ( Make : Godrej or equivalent ) and directed

Supply and fix air cooled air conditioner electric driven (230 V, 50Hz) Split Type single phase of capacity of 2.0TR having operating 425 Volts and Maximum operating ambient temperature 48°C, including drain pipes with making of hanging arrangement with MS stand, long type nut, bolt and welding work complete as required at site as Specified and directed by Engr-in-Charge Make : Voltas, LG, Daikin.

S & F electronic Voltage stablizer of capacity 5 KVA single phase suitable for 2.0 TR AC having operating range of 130V to 240 V all as specified and directed.

S & F copper pipe of inner dia 5/8" & 1/4" Heavy Duty both for connection from inner unit to outer unit complete all as specified and directed by Engr-in-Charge.

M&L for Point wiring with PVC insulated 1.5 sq mm multi stranded copper conductor cable 1100 volts grade drawn into and including concealed PVC conduit not less than 20mm (ISI marked) including all fitting and fixing accessories including sunk in cast iron/pressed steel terminal boxes duly painted with two coats of antirorrrosive paint outside and two coats of aluminium paint inside, 2.8mm thick hylam brand laminated white bakelite sheet cover for mounting of switches, sockets, fan regulators etc and PVC insulated 1.5 Sqmm multistranded copper conductor cable as earth wire and making good the disturbed surfaces to match with the existing surfaces complete all as specified and directed by Engineer in charge.

(a) One light point/Bell point controlled by one switch.

(b) One fan point controlled by one switch.

(c) One socket point controlled by one switch on same board.

(d) One socket point controlled by one switch on Independent board.

Description all as per item No 204 here in befor but with 1100 volts grade copper standard conductor cable of size 2.5 Sqmm with 2.5 Sqmm solid copper conductor PVC for 3 pin switch socket outlet15 Amp independent board complete all as specified and directed by Engineer in charge .

S & F in repair for bell ding dong AC 230 volts single pole one way complete all as specified and directed by Engineer in charge.

S&F in replacement of modular switch 6-10 Amps one module 230 volts AC as per existing model/make complete all as specified and as directed

S&F in replacement of modular switch 16 Amps one module 230 volts AC as per existing model/make complete all as specified and as directed

S&F in replacement of modular socket, 6A -2/3 pin combined 2 module, 230 volts AC as per existing model/make complete all as specified and as directed.

S&F in replacement of modular socket, 6/16A -2/3 pin combined 2 module, 230 volts AC as per existing model/make complete all as specified and as directed .

S&F in replacement of frame plate for modular switch 2 module including screws and washers etc model/make as per existing in site complete all as specified and as directed.

S&F in replacement of frame plate for modular switch 3 module including screws and washers etc model/make as per existing in site complete all as specified and as directed.

S&F in replacement of frame plate for modular switch 4 module including screws and washers etc model/make as per existing in site complete all as specified and as directed.

S&F in replacement of frame plate for modular switch 6 module including screws and washers etc model/make as per existing in site complete all as specified and as directed.

S&F in replacement of frame plate for modular switch 8 module including screws and washers etc model/make as per existing in site complete all as specified and as directed.

S&F in replacement MS Housing box 3 module suitable for modular switch as per existing switch box and making good to the disturb surface complete all as specified and as directed.

S&F in replacement MS Housing box 4/5 module suitable for modular switch as per existing switch box and making good to the disturb surface complete all as specified and as directed.

S&F in replacement MS Housing box 6/8 module suitable for modular switch as per existing switch box and making good to the disturb surface complete all as specified and as directed.

S & F in repair fan regulator Step type of polycarbonate complete all as specified and directed by Engineer in charge.

S&F LED light fitting square 57x57 CM Not less than 36 watt along with fixture Surface / Recessed /Pendent mounting LED luminaries with diffuser channel Luminaires ers, connector block, etc . Complete with all accessories internally pre-wired and including round wood block, connecting up with three core flexible flexible copper conductor cable suitable size complete all as specified and directed by Engineer in charge. Make: Philips cat part no: RC375B LED 36S/840 PSU W60 L660 S2 WH or equiv in luker/Havells

S & F in repair of LED Downlighter ceiling/surface lighting light fitting 12 watt along with fixture Surface mounted suitable for indoor aplication , connector block, etc . Complete with all accessories internally pre-wired connecting up with three core flexible copper conductor cable suitable size complete all as specified and directed by Engineer in charge. Make- WIPRO/ PHILIPS ,BAJAJ

Supply and fixing Single phase ceiling fan 1200 mm decorative type permanent magnet brushless DC Motor 230 v 50 Hz single phase 26-30watt rated current 0.16 amp,pf 0.98 370/360 rpm air delivery 220m3 rated service value 629m3/min/watt no of blades three type of blade leaf 1.05 mm thick aluminium sheet remote control radio frequency 5 speed +off timer option speed regulation class of insulation two nos bearings including connecting wire complete with all as required and directed at site by eng in charge Make : Havells/ CG/ Bajaj

S & F in repair Sheet metal enclosure DBs Single Pole and Neutral (Acrylic) 8 way with 200 Amps rated bus bar 240 volts single pole and neutral complete double door complete all as specified and directed by Engineer in charge

Supply and fixing in replacement MCB single pole and neutral 240 volts 40 Amps, B Series complete all as specified and directed by Engineer in charge

Supply and fixing in replacement MCB/Isolators single pole 240 volts upto 40 Amps, B Series complete all as specified and directed by Engineer in charge

Supply & Fixing in repair single pole and netural sheet metal enclosure with a two pin and earth plug and socket complete with 01 number single pole MCB 20 Amps complete all as specified & directed.

Earthing complete with galvanised steel earth plate electrode 60 cm x60 cm x 6 mm thick buried directly in ground ,(Earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level ,connected to and including galvanised iron earth wire 4 mm dia by means of nut, bolts, check nuts and washers of galvanised iron or steel complete all as specified and directed including testing on completion including the material and labour of the following : - (a) Excavation and earth work for drilling hole for electrode in any type of Soil. -1, reinforced with welded steel wire fabric weighing not less than1.87 Kg/ Sq meter. (c) Funnel with watering pipe of GI 20 mm nominal bore light grade and lugs etc complete all as specified and directed (d) 15 mm nominal bore medium grade GI protection pipe 5 meter long for protection of earthing lead complete all as specified and directed. (e) Requisite quantity of common salt and charcoal. (f) Testing of earthing.

S & F in repair for bell push piano flush type AC 230 volts 5 Amps single pole one way complete all as specified and directed by Engineer in charge.

S & F Exhaust fan heavy duty size sweep 230 mm sweep, 230 v, 50 Hz , complete with louvers including making holes and making good the disturbed surface complete all as specified and directed by Engineer in-charge.

Supply & fix in replacement of LED Security Light Luminaire 25 watt 6000K with .high power LED cool white,CRI 75,+/- 5% supply voltage 220/240/50 Hz, light engine driver base.pole adapter,powder coated pressure die cast aluminium with heat resistant toughened glass with lens type,GI pipe 40 mm dia medium Grade not less than with 1.2 m.long in any shape with 2 nos of pole fitting clamps made out of MS flat , nuts and bolts and painting with aluminium paint. complete all as specified and as directed.Make:Havells cat part no: LHDAUU7PA7J025 or equivalent in philips or bajaj or Suriya

M&L of Sub main wiring with two single core PVC Insulated cable two run of size 6.0 Sqmm multi-strand copper conductor FRLSH cable 1100 volts grade drawing in and including PVC conduit, medium grade not less than 25 mm dia with all conduit accessories and one run of 6.0 Sqmm multi-strand copper conductor FRLSH cable as continuous earth wire complete all as specified and directed. Note : - Two run of 6 Sqmm & one run of 6 Sqmm cable shall be measured as one unit run.

S & F in repair for Switch piano flush type AC 230 volts 5 Amps single pole one way complete all as specified and directed by Engineer in charge.

S & F in repair for Socket outlet 3 pin, 5 Amps and AC 230 volts flush type complete all as specified and directed by Engineer in charge

S & F in repair for Ceiling rose surface bakelite 65 mm x50 mm three terminal AC 230 volts flush type complete all as specified and directed by Engineer in charge

S & F in repair Smart bright Batten Series, LED luminaire using LEDs 20 watt 110 LM/watt with diffuser which ensures uniform distribution and comfort batten series features latest LEDs and delivers consistent light output, stable color start Extruded Aluminum housing, Energy efficient, Flicker free start Inbuilt driver unit Suitable for wall and ceiling mounting using brackets complete all as specified and as directed.

Chetna Enterprises

Arpit dixit construction

Shri kamal traders

M/s Shrangi Rishi Construction

Tiki Water proofing Co

JAIDEV SINGH CHADHA