RENOVATION OF ICT AND DIRECTORATE OF VIGILANCE AND CS, MAIN BUILDING ADA HQ CAMPUS, BANGALORE

Electrical Items :

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure with Cement mortar 1:4 (1 cement :4 coarse sand). The rate is inclusive of cost of transportation, labour for shifting, taking debris away from site, necessary tools & machineries etc., with all leads and lifts and as directed by Engineer in charge.

FINISHING 12 mm cement plaster of mix for Internal plastering with 1:4 (1 cement: 4 fine sand)etc complete as per ADA instructions.

Providing and laying vitrified tilesfor flooring and walls of size 600x600 mm with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc complete as per ADA instructions.

Dismantling of existing Aluminum Partition: Dismantling of existing 75mm thick aluminium partition and door including all necessary hardwares, complete all as per sample available at ADA.

Dismantling of existing wooden Partition: Dismantling of 75mm thick wooden partition and door including strengthening of the existing partition with additional supports and necessary hardwares, complete all as per sample available at ADA.

Dismantling and Re-assembling of existing wooden Partition: Dismantling & Re-assembling of wooden partition and door including strengthening of the existing partition with additional supports and necessary hardwares, complete all as per sample available at ADA.

Provision of Aluminum Partition: Providing, fabricating & Installation of Full height Aluminum Partition including 02 Nos of doors. All the Vertical & Horizontal members shall be powder coated AL Sections of size 65 x 40 x 1.2 mm heavy gauge forming a grid as per drawing enclosed. The partition shall be rigidly fixed to wall / Ceiling / floor, etc for stability, the filler material shall be 05 mm thick clear glass or pin head glass fixed using AL snap fit clips, rubber gaskets,. etc complete as per samples available at ADA.

Provision of PVC Flooring: Supply and laying of 2mm thick PVC Vinyl flooring by using suitable adhesive. The scope of work includes removing the existing PVC flooring, Surface preparation/cleaning, labour charges, transport etc. Complete as per the instructions of Engr-in-charge ADA.

Provision of False ceiling: Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595mm of approved texture, design and patterns as per CPWD Specification 2019, to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33mmthick (galvanized @ 120 grams per sqm including both sides)comprising of main-T runners of size 24x38 mm of length 3000 mm,cross - T of size 24x32 mm of length 1200 mm and secondary intermediate cross-T of size 24x32 mm of length 600mm to formgrid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 12x50 mm long dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 76x25x25x1.6 mm fixed with grid and Z cleat of size 25x37x25x1.6mm thick with precut hole on both 25mm flange to pierce into 12x50mm or even bigger size dash fastener if require, fixed with Glavanised iron perimeter wall angle or size 24x24x0.40 mm of length 3000 mm to be fixed on periphey wall / partition with the help of plastic rawl plugs at 450mm center to center and 40 mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in Charge.

PAINTING WORKS (TOILET) Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface with Water thinnable cement primer etc complete as per ADA instructions

Painting for existing walls: Providing & rendering OBD of lighter shade on wall /ceiling over a coat of wall primer of approved make, two are more coat to get even and neat finish, incl touch up putty, roller finish etc. complete all as per sample available at ADA and OEMs specification.

Installation of exhaust fan Upto 450 mm sweep in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.

Extra for fixing the louvers/ shutters complete with frame for exhaust fan of all sizes.

DISMANTLING AND DEMOLISHING Demolishing brickwork in cement mortar manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material away from the ADA Campus as per directions of Engineer-in-charge.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead for existing tiles. All dismantled materials should be taken away from the site.

Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.

Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof including all accessories etc complete as per ADA instructions.

Providing and laying of Cement Concrete 1:4:8 with 40 mm nominal size aggregates for flooring bed of 150mm thickness. including the cost of all materials, labour, compaction, levelling, at all levels, leads and lifts, curing, shuttering etc complete as per ADA instructions.

Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge.

Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including all fittings and seat cover, cistern fittings, nuts, bolts and gasket etc complete as per ADA instructions.

Providing and Fixing C.P health faucet of approved quality conforming to IS:8931. 15mm nominal bore as directed by engineer in charge including all accessories etc complete as per ADA instructions.

Providing and fixing of PVC Nahani trap (floor trap ) of approved quality and make and confirming to ISI specifications including construction of CC : 1:2:4 as directed by Engineer-in – charge including all accessories etc complete as per ADA instructions.

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters with 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screw set complete as per ADA instructions.

Providing and fixing white vitreous wash basin of size 630x510mm incl pedestal, pillar cock high neck with aerator, C.P brass waste coupling, PVC waste water pipe with fitting etc. all hardware complete, as per the OEM specification.

Providing and fixing 06 mm thick mirror of superior glass (of approved quality) of Rectangular shape 453x357 mm with plastic moulded frame of approved make and shade with 6 mm thick hard board backing including all accessories etc complete as per ADA instructions

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour with 600 mm long towel rail with total length of 645 mm, width78 mm and effective height of 88 mm, weighing not less than 190 gms including all accessories etc complete as per ADA instructions.

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms including all accessories etc complete as per ADA instructions.

Providing and Fixing C.P Toilet Paper Holder fixed with SS screws complete as per ADA instructions.

Providing and fixing of PVC pipe for sanitary line, make Astral / Supreme / Ashirvad, incl trenching, refilling etc. for outside manhole & internal waste pipe connecting to manhole including W.C pan, wash basin , urinal pan, rain water pipe with clamping, necessary specials etc. complete, as per instruction of ADA a) 110 mm Dia

b) 75 mm Dia

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. a) 25mm Dia

b) 20mm Dia

Supply, Erection, Testing & Commissioning of Distribution Board of MDS make comprising of :- 63 amps 3 phase 4 pole MCB, for main control -1 no. 20 amps 1 phase 2 pole MCB – 12 nos. (UPS DB) Housed in suitable MCB Distribution board. DB shall be double Door System. The rate shall be taken including MCB cost.

Supply & Laying of Main Circuit, 2 runs of 4 sq mm + 1 run of 2.5 sq mm flexible PVC insulated copper wire should be run in 1’’ casing N capping / PVC conduit pipe with connected accessories complete in all respect. (For UPS Power Point)

Supply & Laying of Main Circuit, 2 runs of 4 sq mm + 1 run of 2.5 sq mm flexible PVC insulated copper wire should be run in 1’’ casing N capping / PVC conduit pipe with connected accessories complete in all respect. (For RAW Power Point)

Supply & Laying of Sub-Circuit, 2 runs of 2.5 sq mm + 1 run of 1.5 sq mm flexible PVC insulated copper wire should be run in 1’’ casing N capping / PVC conduit pipe with connected accessories complete in all respect. (For UPS Power Point)

Supply & Laying of Sub-Circuit, 2 runs of 2.5 sq mm + 1 run of 1.5 sq mm flexible PVC insulated copper wire should be run in 1’’ casing N capping / PVC conduit pipe with connected accessories complete in all respect. (For RAW Power Point)

Supply & installation of 01 No. of 5/15A power socket out let controlled by 20A single pole switch with indicator housed in PVC boxes, fixed at sitting desk as required by client. (3 modular switch plate with box, Brown colour, for RAW power points including internal wiring)

Supply & installation of 03 No. of 5/15A power socket out let controlled by 20A single pole switch with indicator housed in PVC boxes, fixed at sitting desk as required by client. (8 modular switch plate with box, white colour, for UPS power points including internal wiring)

Supply, Installation & commissioning of 20 Pair crone make MDF Telecommunication box with lockable door.

Supply & fixing of ¾ inch PVC pipe or ¾ inch casing & capping with all connected accessories including running of 0.5mm 2 pair twin core Tel-communication cable with testing termination etc.,

Supply & fixing of ¾ inch PVC pipe or ¾ inch casing & capping with all connecting accessories including of 0.5mm 5pair PVC Tel-communication cable With testing termination etc., (for plan 103 system)

Supply & installation of modular RJ-11 roset socket with PVC box for telephone points.

Supply and fixing of 2x2 feet 36W square LED fittings of false ceiling type and including necessary point wiring with switch control board accessories.

ELECTRICAL ITEMS (TSO TEAM) Supply & Laying of Main Circuit, 2 runs of 4 sq mm + 1 run of 2.5 sq mm flexible PVC insulated copper wire should be run in 1’’ casing N capping / PVC conduit pipe with connected accessories complete in all respect. (For UPS Power Point)

Supply & Laying of Main Circuit, 2 runs of 4 sq mm + 1 run of 2.5 sq mm flexible PVC insulated copper wire should be run in 1’’ casing N capping / PVC conduit pipe with connected accessories complete in all respect. (For RAW Power Point)

Supply & Laying of Sub-Circuit, 2 runs of 2.5 sq mm + 1 run of 1.5 sq mm flexible PVC insulated copper wire should be run in 1’’ casing N capping / PVC conduit pipe with connected accessories complete in all respect. (For UPS Power Point)

Supply & Laying of Sub-Circuit, 2 runs of 2.5 sq mm + 1 run of 1.5 sq mm flexible PVC insulated copper wire should be run in 1’’ casing N capping / PVC conduit pipe with connected accessories complete in all respect. (For RAW Power Point)

Supply & installation of 03 No. of 5/15A power socket out let controlled by 20A single pole switch with indicator housed in PVC boxes, fixed at sitting desk as required by client. (8 modular switch plate with box, white colour, for UPS power points including internal wiring)

Supply & installation of 01 No. of 5/15A power socket out let controlled by 20A single pole switch with indicator housed in PVC boxes, fixed at sitting desk as required by client. (3 modular switch plate with box, Brown colour, for RAW power points including internal wiring)

Supply, Installation & commissioning of 20 Pair crone make MDF Telecommunication box with lockable door.

Supply & fixing of ¾ inch PVC pipe or ¾ inch casing & capping with all connected accessories including running of 0.5mm 2 pair twin core Tel-communication cable with testing termination etc.,

Supply & fixing of ¾ inch PVC pipe or ¾ inch casing & capping with all connecting accessories including of 0.5mm 5pair PVC Tel-communication cable With testing termination etc., (for plan 103 system)

Supply & installation of modular RJ-11 roset socket with PVC box for telephone points.

Supply and fixing of 2x2 feet 36W square LED fittings of false ceiling type and including necessary point wiring with switch control board accessories.

Re-installation of existing 1.5TR 04 Nos. and 2TR 01 No. cassette type indoor unit re-fixing as per the site condition including gas charging, hardware items, copper pipe, drain pipe , electrical wiring etc, complete in all respect.

AIRCONDITIONING SYSTEM (CATIA TEAM) Supply and laying of 4 core 50 sq mm PVC insulated Aluminum armored 1.1KV grade cable in wall/trenches/above false ceiling /ducts by using GI clamps, fixing accessories etc. (30 Rmt) The scope includes Providing cable end termination for the above 4 core 50 Sq mm PVC cable lugs, brass cable glands etc as per standard practice. (2 Sets)

Supply, Erection, Testing & Commissioning of Distribution Board of MDS make comprising of :- 100 amps 3 phase 4 pole MCB, for main control -1 no. 20 amps 1 phase 2 pole MCB – 10 nos. (RAW DB, for 2TR 5Nos and 3 modular raw power points) Housed in suitable MCB Distribution board. DB shall be double Door System. The rate shall be taken including MCB cost.

Supply, Erection, Testing & Commissioning of Distribution Board of MDS make comprising of :- 125 amps 3 phase 4 pole MCB, for main control -1 no. 20 amps 3 phase 4 pole MCB – 04 nos. (RAW DB, for 3TR 4Nos) Housed in suitable MCB Distribution board. DB shall be double Door System. The rate shall be taken including MCB cost.

Supply, Installation, Commissioning and Testing of 3TR Capacity Cassette type Air Conditioning System complete with accessories like indoor unit, outdoor unit, cordeless remote control and vidoflex insulation foam etc. including pressure testing, topping up of R410/407C gas, providing MS angle frame for mounting outdoor units (outdoor unit stand), Installation of Ac by inter connecting the suction & discharge pipe, laying the drainage pipe fixing the indoor unit & fixing the outdoor unit on the frame with necessary support & clamp, testing and commissioning units. Detailed specification of 3TR Cassette Type • Nominal cooling capacity • BEE Start Rating • Power supply • Fan Type • Condensate drainage • Air Filter • Air Flow Volume Noise Level 9000 Kcal/hr = 36000 Btu/hr 3 or above 415 volts, 3phase, 50Hz 3Dimension Screw Fan2000/2300 m3/hr Built in water pump Woven high density polyethylene Four way Air flow -2300 m3/hr 48 db(A)

Supply of Suction & Discharge pipe Size 5/8” Copper for Suction & 3/8”for discharge to inter connect indoor & outdoor with necessary vidoflex insulation.

Supply and fixing of 1” dia PVC pipe including necessary fixing accessories for Drain pipe line.

Supply and Laying of 2.5 sq mm 6 Core PVC Flexible copper cable through PVC pipe to individual A/c indoor unit to outdoor unit including necessary fixing accessories.

Supply & Wiring 4 x 4.0 Sq mm wire in existing conduits or wire race ways. Supply & Wiring 1 x 1.5 Sq mm wire in existing conduits or wire race ways. (RAW Power DB to industrial plug top)

Supply and fixing of 4” PVC (Box Type) casing & capping for routing copper piping and drain piping. (Wherever required)

Supply and fixing of MCB 4 Pole: 20 Amp along with 5 Pin industrial socket plug & box including necessary termination of wires, testing and commissioning of the circuit.

Supply, Installation, Commissioning and Testing of 2TR Capacity Cassette type Air Conditioning System complete with accessories like indoor unit, outdoor unit, cordeless remote control and vidoflex insulation foam etc. including pressure testing, topping up of R410/407C gas, providing MS angle frame for mounting outdoor units (outdoor unit stand), Installation of Ac by inter connecting the suction & discharge pipe, laying the drainage pipe fixing the indoor unit & fixing the outdoor unit on the frame with necessary support & clamp, testing and commissioning units. Detailed specification of 2TR Cassette Type • Nominal cooling capacity • Power supply • Fan Type • Condensate drainage • Air Filter • Air Flow Volume • Noise Level 6000 Kcal/hr = 24000 Btu/hr 220-230 volts, 1phase, 50Hz 3Dimension Screw Fan12000 m3/hr Built in water pump Woven high density polyethylene Four way Air flow -1200 m3/hr 44 db(A)

Supply of Suction & Discharge pipe Size 1/2” Copper for Suction & 1/4”for discharge to inter connect indoor & outdoor with necessary vidoflex insulation.

Supply and fixing of 1” dia PVC pipe including necessary fixing accessories for Drain pipe line.

Supply and Laying of 2.5 sq mm 4 Core PVC Flexible copper cable through PVC pipe to individual A/c indoor unit to outdoor unit including necessary fixing accessories.

Supply & Wiring 2 x 2.5 Sq mm wire in existing conduits or wire race ways.Supply & Wiring 1 x 1.5 Sq mm wire in existing conduits or wire race ways. (RAW Power DB to industrial plug top)

Supply and fixing of 4” PVC (Box Type) casing & capping for routing copper piping and drain piping. (Wherever required)

Supply and fixing of MCB 2 Pole: 20 Amps along with industrial socket plug & box charges including necessary termination of wires, testing and commissioning of circuit.

FURNITURE WORKS: The premium executive table size shall be : 2400 Width mm x 1104 Depth mm x 735 Height mm. The top panel shall be 40 mm thick(18 mm MDF + 18 mm MDF batons + 4 mm Natural Veneer) Veneered portion of work surface is finished with high gloss polyster. The understructure shall be having legs made from 1.6 mm thick MS clad with the strips of MFC (Medium Density fiber). Hollow construction of legs facilitates wire management. The modesty & side panel should be 18 mm thick MDF plus pigmented black and coated with melamine. The storage shall be having drawer unit unit body shall be constructed from 18 mm thick MDF boards has combination of 2 box drawers + 1 filling drawer. Drawers should be mounted on double extension ball slides + drawer fronts should be of natural veneer coated with High gloss Polyster and made of 23 mm (18 mm MDF + 4 mm Natural Veneer + 1 mm DL) and drawer body made of 14 mm MDF (12 mm MDF + 1 mm DL + 1 mm DL). The Premium executive table ERU size shall be : 1400 Width mm x 580 Depth mm x 690 Height mm. The top panel shall be 40 mm thick (18 mm MDF + 18 mm MDF batons + 4 mm Natural Veneer) Veneered portion of work surface is finished with high gloss polyster. The understructure shall be having the modesty panel of 18 mm thick MDF plus pigmented black and coated with melamine. The storage shall be having drawer unit unit body shall be constructed from 18 mm thick MDF boards has combination of 2 box drawers + 1 filling drawer . Drawers should be mounted on double extension ball slides + drawer fronts should be of natural veneer coated with High gloss Polyster and made of 23 mm (18 mm MDF + 4 mm Natural Veneer + 1 mm DL) and drawer body made of 14 mm MDF (12 mm MDF + 1 mm DL + 1 mm DL). The Back unit size shall be of : 1860 Width mm x 560 Depth mm x 670 Height mm. The door shall be 23 mm thick ( 18 mm thick Batons + 4 mm Veneer + 1 mm Backing Decorated ( BDL) ) . The Shelves and Partitions should be of 18 mm thick MDF( Medium density fiber) + Pigmented Black and coated with Melamine. Make: GODREJ BOYCE MFG/WIPRO / FEATHERLITE / DURIAN/ HNI India / Nilkamal

6 seater rectangular meeting table with table top of 3 layer prelaminated particle board of grade2, type 2 of IS 128:123(210 x 115 x 74) in cm • Work top--Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Soft closing dual access flap provided for access to power supply and data cables. • Under structure-The Under-structure consists of mixture of 25mm and 18mm Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Anodised aluminium alloy 63400 - WP profile is added at bottom edges for improving the aesthetics. The product has a knock-down construction. • Wire Management-A wire raiser made of 0.8mm CRCA MS IS: 513. It is epoxy polyester powder coated (DFT 40-60 microns) for flow of wires and cables. A Power box with 2 cutouts on either side for standard 8 modules Anchor Roma is provided. Beside each cutout, an additional cutout with plate is provided for mounting Audio Visual Cables (eg. HDMI, VGA-A,etc). Make: GODREJ BOYCE MFG/WIPRO / FEATHERLITE / DURIAN / HNI India / Nilkamal

Supply & Installation of High Back revolving chair. Overall Dimensions of Chair-Seat Height - min 49.9 to max 58.9 cm. Total Height - min 134.9 to 143.9 cm. Width & Depth of Chair as measured from pedestal - Width 77 cm and Depth 77 cm • Seat/back assembly: The seat should be made up of 1.2 ± 0.1cm. Thick hot pressed plywood and upholstered with leather and moulded polyurethane foam. The back foam should be designed with contoured lumber support for extra comfort. back size: 53.0cm.(w) x 95.4cm.(h) seat size:54.6cm.(w) x 49.0cm.(d) the hr polyurethane foam should be moulded with density = 45 +/-2 kg/m³ and hardness load 16 ± 2 kgf for 25% compression the seat and back should be arrested together with spine made of 0.8 ±0.05 cm thkhr steel and should be black powder-coated (dft 40-60 microns ) • Armrest assay: the armrest assy. should comprise of three parts viz. the armrest support tube and p.u. armrest and the armrest top. The armrest tube assy. should be made of 2.54±0.03cm x 0.16±0.0128cm m.s.e.r.w. support tubes and chrome plated. The p.u. armrest should be made of black integral skin polyurethane with 50-70 shore hardness and reinforced with m.s. insert. the armrest top should be made of abs & upholstered with foam & leather the mechanism should be designed with the following features: * 360° revolving type * seat back tilting ratio of 1 : 1.5 * Front pivot for tilt with feet resting on ground ensuring more comfort. * tilt tension adjustment. * 5-position locking with anti-shock back mechanism, which prevents the backrest from impacting the user when the lock should be released * Static seat depth adjustment = 5.0 ± 0.5cm with 5 position locking. it has an adjustment stroke of 9.0 ± 0.3cm the bellow should be 1 piece and blow moulded in black polypropylene the pedestal should be made of die-cast aluminum with buffing finish. it should be fitted with 5nos. twin wheel castor. the pedestal should be 67.0 ± 0.5cm pitch-centre dia. (77.0 ± 1.0cm with castors) the twin wheel castors should be injection moulded in black nylon. Make:GODREJ BOYCE MFG/WIPRO / FEATHERLITE / DURIAN / HNI India / Nilkamal

• Supply& installation Mid Back revolvingchair without Tilting Mechanism. • The seatshould be made up of 1.2 ± 0.1cm. Thick hot pressed plywood and upholstered with leather and moulded polyurethane foam. The back foam should be designed with contoured lumber support for extra comfort. • Back size:53.0cm.(w) x 73.0cm.(h) seat size:54.6cm.(w) x 49.0cm.(d) thehr polyurethane foam should be moulded with density = 45 +/-2 kg/m³ and hardness load 16 ± 2 kgf for 25% compression the seat and back should be arrested together with spine made of 0.8 ±0.05 cm thkhr steel and should be black powder-coated ( dft 40-60 microns ) the armrest assy. should comprise of three parts viz. the armrest support tube and p.u. armrest and the armrest top. The armrest tube assy. should be made of 2.54±0.03cm x 0.16±0.0128cm m.s.e.r.w. support tubes and chrome plated. The p.u. armrest should be made of black integral skin polyurethane with 50-70 shore hardness and reinforced with m.s. insert. The armrest top should be made of abs & upholstered with foam & leather the seat base assy. should be designed with following features: 360° revolving type without back tilt. It has an adjustment stroke of 12.0 ± 0.3cm the bellow should be 3 piece telescopic types and injection moulded in black polypropylene the pedestal should be made of die-cast aluminum with buffing finish. it should be fitted with 5nos. twin wheel castor. the pedestal should be 67.0 ± 0.5cm pitch-centre dia. (77.0 ± 1.0cm with castors) the twin wheel castors should be injection moulded in black nylon. • Overall Dimensions of Chair Seat Height - min 43.4 to max 55.4 cm. Back Height - min 99.4 to 111.4 cm. Make:GODREJ BOYCE MFG/WIPRO / FEATHERLITE / DURIAN / HNI India / Nilkamal

Supply & Installation of 03-SEATER SOFA • SEAT FOAM: The seat is made up of PU foam in Density 28 ±2 kg/cum with an additional top layer of super soft PU foam in Density 32 ± 2 kg/cu, upholstered with fabric or leatherette. • BACK FOAM: The back is made up of PU foam in Density 28 ± 2 kg/cum with two additional top layer of super soft foam of density 32±2 kg/cum, upholstered with fabric or leatherette. • UNDERSTRUCTURE: Under structure is made up of 1.2±0.1 cm. thick hot pressed plywood [moisture resistance & termite proof as per IS: 303] & pinewood of cross sections devoid of major knots & surface defects. 6 nos. per seat & 3.8mm Dia zigzag spring assembly is mounted over under structure for cushioning purpose. • LEG ASSEMBLY: It is a welded Assembly made in Stainless steel (grade SS 202) tube & plate with plastic end cap. Width (W): 206.0 CM. Depth (D): 90.5 CM. Height (H): 85.5 CM. Seat Height (SH): 45CM. Make:GODREJ BOYCE MFG/WIPRO / FEATHERLITE / DURIAN / HNI India / Nilkamal

Supply & installation of Centre Coffee table with glass top, wooden legs 100 x 65 x 45 mm. • Overall Size : Width : 100cm Depth : 65cm Height : 45cm TABLE LEGS METERIALS: Colour :cherry • TABLE TOP MATERIALS & SIZE: (tempered Glass/ 10mm), L X W X T: 1000x650x10mm Colour: clear. Make:GODREJ BOYCE MFG/WIPRO / FEATHERLITE / DURIAN / HNI India / Nilkamal

Supply & Installation of premium Lounge Seating-Midas 3 seater model of size 183 x 77.50 x 74.50 cm. Make: Godrej/Featherlite/Wipro/Durian/Neelkamal

Supply & Installation of premium Lounge Seating-Midas 1 seater model of size 183 x 77.50 x 74.50 cm. Make: Godrej/Featherlite/Wipro/Durian/Neelkamal

Supply & INSTALLATION OF Discussion table of 4 seater circular in shape of 110 cm 1150(Dia) x 740(Ht) Work Surface-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Soft closing access flap provided for access to power supply and audio cables. Work top is available in two shapes Square and Pebble (Round) Side Panel-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990 matching to the Worktop, Edge banded with matching 2 mm thick PVC lipping. Cutout with Gromet provided for routing cables in case any Audio Visual equipment is to be fixed later. Understructur-The Under-structure consists of an Inner Tube Assembly with Top for Worktop Mounting and Base plate with levellers. The Top Plate is made of 5mm thk hot rolled steel Plates (HR) (As per IS: 2062) & the bottom plate is made of 8mm thk hot rolled steel Plates (HR) (As per IS:2062). The Inner Tube Assembly is made of 25.4mmx 25.4mm x 1.2mm thk round electric resistant welded tube (ERW)(As per IS:7138) welded together using Tungsten inert gas welding. The whole structure is epoxy polyester powder coated (DFT 40-60 microns). The product has a knock-down construction. Cutout for standard Make: GODREJ BOYCE MFG / WIPRO / FEATHERLITE / DURIAN / HNI India / Nilkamal

• Supply & Installation of MID BACK CHAIR, the seat Material- Leather, Color – Black, Revolving Chair – Yes, SEAT/BACK ASSEMBLY: The seat is made up of 1.2 +0 1cm thick hot pressed plywood upholstered with fabric or synthetic leather and moulded Polyurethane Foam The back is made up 1.2 TO 1cm thick hot pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and upholstered with replaceable fabric or synthetic leather upholstery covers and moulded polyurethane foam The back ply and foam is designed with contoured lumber support for comfortable seating posture * MID BACK SIZE 48.5 cm (W) X 64.5 cm (H) * SEAT SIZE 51.0 cm (W) X 48.0 cm (D) • HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam for seat and back is moulded with density = 45 +/-2 kg/m* and Hardness load 16 2 kgf as per IS 7888 for 25% compression • ARMRESTS (ADJUSTABLE):The armrest top is moulded from polyurethane(PU) and mounted on to a drop lift adjustable type tubular armrest support made of B3 81z0 03 cm x 0 2-LO 01 cm thk M S E R W tube having chrome plated finish The armrest height adjustable up to 6 5z0 Scm in 5 steps • KNEE TILT SYNCHRO MECHANISM WITH SEAT DEPTH ADJUSTMENT * 360° revolving type Single point control * Single point control * Front pivot for tilt with feet resting on ground ensuring more comfort Tilt tension adjustment * 4-position locking with anti-shock feature Seat back tilting ratio of 1.2 * Seat depth adjustment of 6.0 +0 Scm can be locked in 6 positions • FRONT PIVOT SYNCHRO MECHANISM: The mechanism is designed with the following features * 360° revolving type Single point control * Front pivot for tilt with feet resting on ground ensuring more comfort Tilt tension adjustment * 4-position locking with anti-shock feature * knockdown condition vacations within +1 0 cm • ADJUSTABLE BACKREST: The back rest is connected to the mechanism with a drop-iift mechanism which can be adjusted in the range of 7.0 IO.5cm. And locked in 5 positions for the better lumbar support. • FIXED SPINE (COFERENCE/ VISITOR): The seat and back are arrested together with fixed type spine i.e no back up/down adjustment; made of 0.8 TO.05 cm thk HR Steel and is black powder-coated ( DFT 40-60 microns ) • HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 10.010.3 cm. • PEDESTAL ASSEMBLY: The pedestal is fabricated from 0.2 0.02 cm thick HR sheet, chrome plated and assembled with injection moulded black polypropylene hub cap and 5 nos. twin wheel castors. The pedestal is 66.010.Scm. Pitch-centre dia. (76.011.0 cm with castors). • TWIN WHEEL CASTORS: The twin wheel castors are injection moulded in black Nylon. Make:GODREJ BOYCE MFG/WIPRO / FEATHERLITE / DURIAN / HNI India / Nilkamal

Desking -Premium suit model of size 210*210*75 cm (Main Table +ELU+PED). Primary Work Surface Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Soft closing access flap with in-build power box are provided on work surface for wire management Secondary Work Surface Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Modesty Panel Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Under structure Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Integrated Pedestal Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Pedestal construction is BOX-BOX-FILE type which Uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Pedestals are provided with lock for security. Make: GODREJ BOYCE MFG / WIPRO / FEATHERLITE / DURIAN / HNI India / Nilkamal

Back unit-Premium suite model of size 165cm (Back unit 2) Top Panel-Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Slide Door Unit-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping for body panels like side, bottom,back and shelves. Shutters are made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Shutters have a soft closing & anti slam mechanism. Handles are provided for ease of opening.Storage is provided with lock for security. Display/Storage Unit-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping for body panels like side,back and shelves.Doors are made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Top panel of display unit Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Make: GODREJ BOYCE MFG / WIPRO / FEATHERLITE / DURIAN / HNI India / Nilkamal

Supply & installation of High Back Pure leather revolving chair of size approximately 76.10L x 76.10D x 114-131.50H CM. The chair made byLeather high back chair, Back profile can be adjustable, Active Bio-synchro Mechanism. The chair comes with 5 position tilt limiter. Make:GODREJ BOYCE MFG/WIPRO / FEATHERLITE / DURIAN / HNI India / Nilkamal

Supply & installation of Mid Back Pure leather revolving chairs for visitors size approximately 76.10L x 76.10D x 96.50-114H CM. The chair made byLeather high back chair, Back profile can be adjustable, Active Bio-synchro Mechanism. The chair comes with 5 position tilt limiter. Make:GODREJ BOYCE MFG/WIPRO / FEATHERLITE / DURIAN / HNI India / Nilkamal

Desking -Premium suit model of size 180*210*75 cm (Main Table +ELU+PED). Primary Work Surface Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Soft closing access flap with in-build power box are provided on work surface for wire management Secondary Work Surface Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Modesty Panel Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Under structure Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Integrated Pedestal Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Pedestal construction is BOX-BOX-FILE type which Uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Pedestals are provided with lock for security. Make: GODREJ BOYCE MFG / WIPRO / FEATHERLITE / DURIAN / HNI India / Nilkamal

Chair: large seat Depth + cross headrest + Coat hanger SEAT/BACK ASSEMBLY: The seat is made up of 1.2 * 0 fern thk hot pressed plywood measured as per QA method described in OCP-QLTA-PL14-18 The Back is made up of injection moulded glass filled nylon & upholstered using Micro mesh fabric with high tenacity yarn with 28 density foam Sandwich in lumbar area. * SEAT SIZE(Larger Seat Depth) : 47.0 cm. (W) x 51.5 cm (D) * SEAT SIZE(Standard Seat Depth) 47 0 cm. (W) x 49.5 cm. (D) ” BACK SIZE : 45.0 cm. ”(W) x 65.3 cm. (M) HIGH RESILIENCE (HR) POLYURETHANE FOAM The HR poly methane seat foam is moulded with density 45+/-2 kg/m"" and hardness 16 + 2 kgf as per IS:7888 for 25% compression. ARMRESTS : The adjustable armrest is designed with the folIowing features » Up-Down adjustment— 8 steps (8.0+0.Scm range) • Height adjustable armrest structure which is Powder Coated & fitted with an armrest top. • Fixed Armrest Top is PU moulded over metal insert. LUMBAR SUPPORT ASSEMBLY: The Lumbar support consists of polypropylene pad The Height of Lumbar pad can be adjusted through two projecting knobs provided on the rear side of the pad Lumbar pad has an adjustment of 8 0 + 0.5 cm in height.FRONT PIVOT SY!’JCHRO MECHANISM: The adjustable tilting mechanism is designed with the following features. Make: GODREJ BOYCE MFG / WIPRO / FEATHERLITE / DURIAN / HNI India / Nilkamal

Supply of MID BACK CHAIR of Overall Dimensions shall be Chair-Seat Height - min 43.3cm to max 54.3cm. Height - min 89.5cm to max 100.5cm.Width & Depth of Chair as measured from pedestal - Width-76.3cm and Depth- 76.3cm.Seat assembly: The seat assembly shall be made up of 1.2 ±0.1cm thick hot-pressed plywood, upholstered with fabric upholstery covers and moulded polyurethane foam. Seat size: 47.0 cm. (w) x 48.0 cm. (d) Back assembly: The backasembly. shall be made of powder coated (oft 40-60 microns) tubular frame of 0 2.54 ±0.03cm. x 0.2±0.016cm.thick. MS ERW tube designed with contoured lumbar support for extra comfort.The back shall be upholstered using double layer spacer mesh fabric with high tenacity yarn. Back size : 46.5 cm (w) x 60.5 cm (h).High Resilience (HR) polyurethane foam: The HR polyurethane foam shall be moulded with density =45+/-2 kg/m3 and hardness load 16 ± 2 kgf for 25% compression. Armrests: The one-piece armrests shall be injection moulded from black co-polymer polypropylene. Centre-Tilt mechanism: The mechanism shall be designed with the following features: • 360° revolving type. • 17° ±2° maximum tilt on pivot at centre • upright position locking. tilt tension adjustment. Pneumatic height adjustment: The pneumatic height adjustment has an adjustment stroke of 11.0 ±0.3cm.Telescopic bellow assy: The bellow shall be 3 piece telescopic type and injection moulded in black polypropylene.Pedestal assembly: The pedestal shall be injection moulded in black 33% glass-filled nylon66 and fitted with 5 nos. twin wheel castors. The pedestal shall be 66.3 ±0.5cm. Pitch-center dia. (76.3 ±1.0cm with castors.)Twin wheel castors: The twin wheel castors shall be injection moulded in black nylon etc. Make: GODREJ BOYCE MFG / WIPRO / FEATHERLITE / DURIAN / HNI India / Nilkamal

Desking -Premium suit model of size 165*195*75cm (Main Table +ERU+PED). Primary Work Surface Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Soft closing access flap with in-build power box are provided on work surface for wire management Secondary Work Surface Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Modesty Panel Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Under structure Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Integrated Pedestal Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shadeconfirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of 25mm thick MDF one side pre-laminate board confirming toIS-14587:1998 with 0.4mm PVC membrane pressed on to top Pedestal construction is BOX-BOX-FILE type which Uses powder coated 400 MM long metalPanel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Pedestals are provided with lock for security. Make: GODREJ BOYCE MFG / WIPRO / FEATHERLITE / DURIAN / HNI India / Nilkamal

Supply of ‘L’ shaped Manager Table of size shall be 1650mm(L) x 750mm(D) and Return Table 1200mm(L) x 450mm(D) with one side attached Frame of Fabric Magnetic and White board. Work top shall be made up of 25mm thick prelaminated particle board interior grade (As per IS: 12823). Bottom shall have a backing laminate of minimum 0.6mm thickness. All the edges of work surface shall be provided with machine pressed 2mm thick PVC Edge band with glue of standard quality.The single side legs shall be used for supporting panels & work surface on one side only. Single side legs shall be fabricated by CO2 welding in MS Tube of section 38 mm x 25 mm (IS: 7138 ERW Tube) with the base plate of the MS plate of 35x22x5mm (IS: 2062, 5 mm HR) over which an M8 Leveler shall be fitted, which shall allow for adjustment of the height by 50mm and this shall be coated with minimum 45 micron thickness of epoxy powder coating. Body Panel Structure: uprights and horizontals shall be made of aluminum extrusion having material AL96063-T6 or equivalent and shall have an average wall thickness of 1.2 mm and also powder coated with epoxy-polyester powder. Fabricated bottom frame for 52.4mm shall be comprises of L- Channels and it shall be made of 2mm thick CRCA steel (IS:513), formed plates of 3mm thick HR steel (IS:2062) & ERW steel tube of size 35x15x1.6mm in oval cross section (IS:7138) welded together. This shall be coated with average 50 to 60 micron thickness of epoxy powder coating. The 52.4 mm panel has more elaborate and flexible construction offering various functional and decorative finishes as well as cable management capacity. Make:GODREJ BOYCE MFG/WIPRO / FEATHERLITE / DURIAN / HNI India / Nilkamal

Supply of Mid Back Chair of size shall be : SEAT SIZE (Larger Seat Depth) : 47.00cm (W) x 51.50cm (D), SEAT SIZE (Standard Seat Depth) 47.00cm. (W) x 49.50cm.(D), BACK SIZE : 45.00 cm(W) x 65.3cm(H).The seat shall be made up of 1.2 + 0.1cm thick hot pressed plywood.The Back shall be made up of injection moulded glass filled nylon & upholstered using Mesh fabric with high tenacity yarn. HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam shall be moulded with density 45+/-2 kg/cum and hardness 16 + 2 kgf as per IS:7888 for 25% compression.ARMRESTS : The adjustable armrest shall be designed with the following features:Up-Down adjustment— 8 steps (8 0+0.Scm range).Height adjustable armrest structure which shall be powder coated & fitted with an armrest top.Fixed Armrest Top shall be PU moulded over metal insert. LUMBAR SUPPORT ASSEMBLY: The Lumbar support consists of polypropylene pad with moulded polyurethane foam & covered with polyester fabric.The Height of Lumbar pad can be adjusted through two projecting knobs provided on the rear side. Lumbar pad shall be an adjustment of 8.0 + 0.5 cm in height. Make: GODREJ BOYCE MFG / WIPRO / FEATHERLITE / DURIAN / HNI India / Nilkamal

Supply of RECTANGULAR SHAPED OFFICE WORKSTATION having overall size shall be 1200mm x 600mm and consists of Tile Based System of Thickness - 52mm, Height - 1200mm and 120mm gap from floor.The Understructure shall be constructed with MS Powder Coated Legs and the Worksurface shall be made up of 25mm thick Prelaminated Particle Board with PVC Edge.The Tile based system shall have Top tile each White board and remaining Fabric magnetic tiles.The Intermediate Blocks shall be Fabric and the Bottom tile shall be Metal. Wiremanagement :- switches to be mounted on intermediate tiles/bottom metal tiles and accessed through cutout. Accessories: Key board tray,CPU Trolley,Mouse pad etc of superior make shall be attached with the workstation etc. Make:GODREJ BOYCE MFG/WIPRO / FEATHERLITE / DURIAN / HNI India / Nilkamal

Providing and fixing of 03 Drawer Mobile pedestal of size 390mm (L) x 435mm (W) x 646mm (H) (Box + Box + File) all as per OEM Specification and sample available at ADA. Make: GODREJ BOYCE MFG/WIPRO / FEATHERLITE / DURIAN / HNI India / Nilkamal

Sliding computer key board tray of minimum size 473mm (L) X 200mm (D) metal tray is made of minimum 0.8 mm thick CRCA D grade as per IS-513 with sliding channels and other fixing fittings. The front face of tray shall match work surface edge. It should also have a Single extension ball slide assembly/Telescopic slider assembly, retro fit mouse tray.

230-345W X 226D X 180H CPU Trolley is made of 1.0 mm thick MS CRCA Sheet and Side support is made of 0.8 mm thick MS CRCA Sheet Lockable/Non-lockable twin wheel castors are injection moulded in Black Nylon.

PNR INTERIOR SOLUTIONS PVT LTD