Construction of Convention centre cum Training Hall at Tamenglong under Hill Area Development Programme.

Amount

(A) CONVENTION CENTRE

EARTH WORK

Earth work in excavation in hill cutting i/c disposal of excavated earth lead upto 50 metre and lift upto 1.5 metres disposed earth to be leveled and neatly dressed. (a) Hard Shale

Earthwork in excavation foundation trenches or drains including dressing of sides and ramming of bottoms and including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m. (a) Lift upto 1.5 m

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm.in depth, consolidating each deposited layer by ramming and watering lead upto 50 metres lift upto 1.5 metre.

Filling in plinth with sandy soil under floors including watering ramming,consolidating and dressingcomplete with a lead of 15 km

CEMENT CONCRETE WORK

Providing and laying cement concrete works in foundation and plinth excluding the cost of centering & shuttering in (b) 1: 4 : 8 (1 cem : 4 Kanhaighat Coarse sand : 8 graded stone aggrt.40mm n/size).

RR MASONERY

Polygonal rubble masonry /RR masonry (uncourse/brought to course)/square rubble masonry (uncourse/brought to course) with hard stone of approved quality in foundation and plinth in cement mortar 1:6 (1cem:6 course sand) i/c leveling up with cement concrete 1:6:12 (1cem: 6 course sand :12 gr st. aggrt. 20mm nominal size) at plinth level.

FORM WORKS

Providing form work i/c centering & shuttering so as to give a rough finish strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4m and removal of the same for insitu reinforced concrete to and plain concrete work in.(using 12mm shuttering ply)(a) Foundation footings, bases of columns etc. and mass concrete.

(d) Columns, pillars, posts and struts (square, rectangular or polygon in plan).

(e) Sides and soffits of beams, beam haunchings, cantilivers, girders, bressumers and lintels not exceeding 1m in depth.

REINFORCED CEMENT CONCRETE WORKS

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :(a) 1:1.5:3 (1 cement : 1.5 Kanhaighat coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. up to floor five level,excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement :1.5 Kanhaighat coarse sand:3 graded stone aggregate 20 mm nominal size.) (i) Upto floor five level.

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement1: 1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size.) (i) Upto floor five level

Steel Reinforcement for R.C.C. work including bending, binding and placing in position complete. (b) Thermo-Mechanically Treated bars.

BRICK WORK

2nd class (local first class) brick work in foundation and plinth in cement mortar 1:4 (1 cement : 4 Kanhaighat coarse sand)

Half brick masonry 2nd class (local first class) in cement mortar 1:4 (1 cement : 4 kanhaighat coarse sand) in superstructure.

STEEL WORKS

Steel work in built up tubular trusses including cutting, hoisting, fixing in position and applying a coat of approved steel primer red oxide chrom primer conforming to IS 2079, welded and bolted ncluiding special shape washer etc. complete.a) Electric resistant welded tube (Conforming to IS : 1611 - 1979).

Trazoidal pre painted profile sheet roofing of approved brand DYNA Roof or equivalent with selt drilling screws of 68 mm long Xylon coated screws with PVC washer & Cap complete , excluding thecost of purlin & trusses 1) Prepainted Galvalume sheet (PPGL) i) Profile sheet 0.50 mm / 4.2 kgs / sqm

Trapizoidal pre -painted profile sheet for ridges gutter or valley 610 mm wide of approved brand DYNA roof or equivalent fixed with seld drilling screws of 68 mm long xylon coated screws with PVC washer & caps completed excluding the cost of purlins rafter & trusses i) Pre painted Galvalume sheet (PPGL) i) profile sheet 0.50 mm /4.2 kgs /sqm

WOOD WORK

Providing wood work in frames of doors, windows, clerestory windows and other frames wrought framed and fixed in position ( a) Local best quality Uningthou

P/F 40 mm thick panelled, glazed or panelled & glazed shutters for doors, windows and clerestory windows i/c bright finished brass hinges (ordinary type) with necessary screws .a) Local best quality Uningthou

Providing wood work in frame of false ceiling, partition etc sawn and put up in position (b) Uchan/Tairen Wood

Providing & fixing 3mm thick Assamite hard board sheet ceiling with beading 62mmx12mm of Uchan wood completeframe work to be paid separatrly)

Steel glazed windows and ventilators of standard rolled steel section joints mitred and welded with 15x3mm lugs 10 cm long with steel plugs embeded in cement concrete block 15x10x10 cm of 1:3 :6 (1cem:3 course sand :6 st aggrt. 20mm nominal size) or wooden plugs and screws of rawl plugs and screws or with fixing clips with bolts and nuts as required i/c providing and fixing of 4mm thick glass panes with glazing clips complete i/c applying a priming coat of approved steel primer excluding cost of metal beadings and other fittings exept necessary hinges or pivots as required.(i) Ready made steel windows/Ventilators (Side/Top hung)

Providing & fixing M.S. grills of required pattern to wooden frames of window etc. with M.S. flats at required springs & frames all round bars with round headed bolts & nuts or by screws (a) ornamental grill.

Providing & fixing Brass Sliding door bolts bright finished or black enamelled with nuts & screws etc. complete (a) 250x16 mm

Providing & Fixing Brass Tower bolts with screws & nuts complete, (a) 250x10 mm

Providing & fixing Brass Handles with screws & nuts complete,(a) 125mm

Providing & fixing M.S. Hookes and eyes.(a) 150mm

Providing & fixing M.S. fan clamp type I of 16mm dia M.S bar bent to shape with hooked ends in RCC slabs during laying i/c painting the exposed portion of loop, all per standard design complete.

FLOORING WORKS

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by manufacturer ), with water absorption less than 0.08 % and conforming to IS : 15622, of approved make , in all colours & shade ,in laid on 20 mm thick cement mortar 1:4 ( 1 cem : 4 coarse sand ) , i/c grouting the joints with white cement and matching pigments etc

P/L vitrified tiles in different sizes ( thickness to be specified by the manufaturer ) with water absorption less than 0.08% and conforming to IS 15622,of approved make ,in all colours & shades in skirting ,riser of steps,over 12mm thick bed of cement mortar 1:3 (1cem:3 kanhaighat course sand) i/c grouting the joints with white cement & matching pigments etc,complete (i)size of tile-600x600mm

White glazed tiles 10 mm in flooring, treads or steps & landing laid on a bed of 12 mm thick cement mortar 1: 3 (1 cement: 3 Kanhaighat coarse sand) finished with flush pointing in white cement.

White glazed tiles 10 mm thick in skirting risers of steps & dado on 10 mm thick cement plaster 1: 3 (1 cement: 3 coarse sand) & jointed with white cement slurry.

12mm cement plaster 1:3 (1 cement : 3 Kanhaighat coarse sand).

Applying one coat of cement primer of approved quality on wall surface.

Finishing wall weather shield paint of approved quality on new work (three or more coats) to give an even shade.

Applying ready mixed priming coat pink primer of approved quality on wood work.

Painting (two or more coats excluding priming coat) with synthetic enamel paint of approved quality all shades except black or chocolate on steel on new work to give an even shadee.

Painting (two or more coats) with plastic emulsion paint of approved quality in all shades on new work ecxept walls to give an even shade.

(B) WATER SUPPLY (WITH OVERHEAD TANK) & SANITARY INSTALLATION

Earth work in excavation foundation trenches or drain including dressing of sides and ramming of bottoms and including getting out the excated soil and disposal of surplus excavated soil as directed within alead of 50 m (a) Lift upto 1.5 m

Filling available excavated earth (excluding rock) in trenches, plinth sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming & watering lead upto 50m and lift upto 1.5m.

Providing and laying cement concrete works in foundation and plinth excluding the cost of centering & shuttering in (b) 1:4 : 8 (1 cem : 4 Kanhaighat Coarse sand : 8 graded stone aggrt.40mm n/size).

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :(a) 1:1.5:3 (1 cement : 1.5 Kanhaighat coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement1: 1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size.) (i) Upto floor five level

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. up to floor five level,excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement :1.5 Kanhaighat coarse sand:3 graded stone aggregate 20 mm nominal size.) (i) Upto floor five level.

Steel Reinforcement for R.C.C. work including bending, binding and placing in position complete. (b) Thermo-Mechanically Treated bars.

2nd class (local first class) brick work in foundation and plinth in cement mortar 1:4 (1 cement : 4 Kanhaighat coarse sand)

FORM WORKS

Providing form work i/c centering & shuttering so as to give a rough finish strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4m and removal of the same for insitu reinforced concrete to and plain concrete work in.(using 12mm shuttering ply)(a) Foundation footings, bases of columns etc. and mass concrete.

(d) Columns, pillars, posts and struts (square, rectangular or polygon in plan).

(e) Sides and soffits of beams, beam haunchings, cantilivers, girders, bressumers and lintels not exceeding 1m in depth.

(c) Vertical surface such as wall (any thickness ),partition and the like i/c attached pilasters,buttress,plinth & string courses and the like

b ) Flat surfaces such as suspended floor, roofs landings and the like (i) floors etc. upto 200mm in thickness.

FLOORING WORKS

50 mm cement concrete flooring 1:2:4 (1 Cement: 2 coarse sand:4 stone aggregate 20 mm & down gauge) finished with a floating coat of neat cement.

25 mm cement concrete flooring 1:2:4 (1 Cement: 2 coarse sand:4 stone aggregate 20 mm & down gauge) finished with a floating coat of neat cement.

FINISHING

12mm cement plaster 1:3 (1 cement : 3 coarse sand).

Neat cement punning

PIPE FITTING

Providing and fixing G.I. pipes complete with G.I. fittings and clamps i/c cutting and making good the walls etc.( External )

Providing and fixing G.I. pipes complete with G.I. fittings and clamps including cutting and making good the walls etc.(Internal work) (a) 15mm Diameter.

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast iron P or S trap 10 litre low level white PVC. flushing cistern i/c flush pipe ,manually controlled device (handle level) conforming to IS 7231 with all fiiting and fixture complete i/c cutting and making good the wall and floor, wherever required: i) white vetreous china orissa pattern W.C pan of size 580 x 440 mm with integral type foot rests.

Providing and Fixing wash basin with C.I. brackets, 15mm dia cp Brass single hole basin mixer of approved quality andmake, including painting of fittings and brackets, cutting and making good the walls wherever required:-White vitreous chinaWash basin size 550X400mm with a 15mm cp Brass single hole basin mixer.

Providing and fixing 610 X 20 mm Diplomat brass towel rail complete with C.P. brass brackets fixed to wooden cleats with C.P. brass screws .

Providing and fixing liquid soap container of glass with C.P. lid and brackets fixed to wooden cleats with C.P. brass screws.

P/F600X450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleat with C.P brass screws and washers complete.

P/F UPVC soil,waste, rain water and vent pipes i/call requisite fittings, jointing of pipes & fittings with solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in charge (a) 110mm. Dia.

P/F UPVC soil,waste, rain water and vent pipes i/call requisite fittings, jointing of pipes & fittings with solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in charge (a) 75mm. Dia.

P/F UPVC traps with 110mm inlet and 75mm outlet of self cleaning design with screwed down of hinged grating with or without vend arm complete i/c cost of cutting and making good the walls and floors.

P/F C.I cover with frame for (manhole and chamber) (a) 600x450mm (Heavy duty)(38kg)

Providing and fixing brass stop cock of approved quality.(a) 15mm diameter.

Providing and fixing C.P. bib cock of approved quality. (a) 15 mm diameter.

P/F Brass full way G.M valve with C.I wheel of approved quality (a) 25mm diameter

Providing and fixing WATER STORAGE TANKS (Sintex) with 400 mm diameter nominal base G.I. overflow tube 25 mm nominal G.I. inlet and 15 mm nominal G.I. outlet tube i/c hoisting a height of 10 m above ground level.(i)2000 litres net capacity storage tanks

P/F 1 HP tulu, single phase (CROMOTON) Pumpset with necessary fixtures complete.

( C ) CONVENTION KITCHEN

Earthwork in excavation foundation trenches or drains including dressing of sides and ramming of bottoms and including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m. (a) Lift upto 1.5 m

Filling in plinth with sandy soil under floors including watering ramming,consolidating and dressingcomplete with a lead of 15 km

CEMENT CONCRETE WORK

Providing and laying cement concrete works in foundation and plinth excluding the cost of centering & shuttering in (b) 1: 4 : 8 (1 cem : 4 Kanhaighat Coarse sand : 8 graded stone aggrt.40mm n/size).

RR MASONERY

Polygonal rubble masonry /RR masonry (uncourse/brought to course)/square rubble masonry (uncourse/brought to course) with hard stone of approved quality in foundation and plinth in cement mortar 1:6 (1cem:6 course sand) i/c leveling up with cement concrete 1:6:12 (1cem: 6 course sand :12 gr st. aggrt. 20mm nominal size) at plinth level.

FORM WORK

Providing form work i/c centering & shuttering so as to give a rough finish strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4m and removal of the same for insitu reinforced concrete to and plain concrete work in.(using 12mm shuttering ply)(a) Foundation footings, bases of columns etc. and mass concrete.

(d) Columns, pillars, posts and struts (square, rectangular or polygon in plan).

(e) Sides and soffits of beams, beam haunchings, cantilivers, girders, bressumers and lintels not exceeding 1m in depth.

REINFORCED CEMENT CONCRETE WORKS

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :(a) 1:1.5:3 (1 cement : 1.5 Kanhaighat coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. up to floor five level,excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement :1.5 Kanhaighat coarse sand:3 graded stone aggregate 20 mm nominal size.) (i) Upto floor five level.

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves,chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level, excluding the cost ofcentering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement :1.5 Kanhaighat coarse sand:3 graded stoneaggregate 20 mm nominal size.)

Steel Reinforcement for R.C.C. work including bending, binding and placing in position complete. (b) Thermo-Mechanically Treated bars.

BRICK WORK

2nd class (local first class) brick work in foundation and plinth in cement mortar 1:4 (1 cement : 4 Kanhaighat coarse sand)

Half brick masonry 2nd class (local first class) in cement mortar 1:4 (1 cement : 4 kanhaighat coarse sand) in superstructure.

STEEL WORK & ROOFING

Steel work in built up tubular trusses including cutting, hoisting, fixing in position and applying a coat of approved steel primer red oxide chrome primer conforming to IS 2079, welded and bolted incluiding special shape washer etc. complete. (a) Electric resistant welded tube 9 Conforming to IS : 1611 - 1979).

Trazoidal pre painted profile sheet roofing of approved brand DYNA Roof or equivalent with selt drilling screws of 68 mm long Xylon coated screws with PVC washer & Cap complete , excluding thecost of purlin & trusses 1) Prepainted Galvalume sheet (PPGL) i) Profile sheet 0.50 mm / 4.2 kgs / sqm

Trapizoidal pre -painted profile sheet for ridges gutter or valley 610 mm wide of approved brand DYNA roof or equivalent fixed with seld drilling screws of 68 mm long xylon coated screws with PVC washer & caps completed excluding the cost of purlins rafter & trusses i) Pre painted Galvalume sheet (PPGL) i) profile sheet 0.50 mm /4.2 kgs /sqm

Steel glazed windows and ventilators of standard rolled steel section joints mitred and welded with 15x3mm lugs 10 cm long with steel plugs embeded in cement concrete block 15x10x10 cm of 1:3 :6 (1cem:3 course sand :6 st aggrt. 20mm nominal size) or wooden plugs and screws of rawl plugs and screws or with fixing clips with bolts and nuts as required i/c providing and fixing of 4mm thick glass panes with glazing clips complete i/c applying a priming coat of approved steel primer excluding cost of metal beadings and other fittings exept necessary hinges or pivots as required.(i) Ready made steel windows/Ventilators (Side/Top hung)

WOOD WORK

Providing wood work in frames of doors, windows, clerestory windows and other frames wrought framed and fixed in position a) Local best quality Uningthou

P/F 40 mm thick panelled, glazed or panelled & glazed shutters for doors, windows and clerestory windows i/c bright finished brass hinges (ordinary type) with necessary screws .a) Local best quality Uningthou

Providing wood work in frame of false ceiling, partition etc sawn and put up in position (b) Uchan/Tairen Wood

Providing & fixing 3mm thick Assamite hard board sheet ceiling with beading 62mmx12mm of Uchan wood completeProviding & fixing 3mm thick Assamite hard board sheet ceiling with beading 62mmx12mm of Uchan wood complete

50 mm cement concrete flooring 1:2:4 (1 Cement: 2 coarse sand:4 stone aggregate 20 mm & downgauge) finished with a floating coat of neat cement

Providing & fixing 20mm plank as eave board with

White glazed tiles 10 mm in flooring, treads or steps & landing laid on a bed of 12 mm thick cement mortar 1: 3 (1cement: 3 coarse sand) finished with flush pointing in white cement.

Providing & fixing M.S. grills of required pattern to wooden frames of window etc. with M.S. flats at required springs &frames all round bars with round headed bolts & nuts or by screws (a) ornamental grill.

12mm cement plaster 1:3 (1 cement : 3 Kanhaighat coarse sand)

Neat cement punning

Applying one coat of cement primer of approved quality on wall surface.

Finishing wall weather shield paint of approved quality on new work (three or more coats) to give an even shade.

Distempering with dry distemper of approved quality (two or more coats) of required shade on new work i/c priming coat ofwhiting to give an even shade.

Applying ready mixed priming coat pink primer of approved quality on wood work.

Painting (two or more coats excluding priming coat) with synthetic enamel paint of approved quality all shades except blackor chocolate on steel on new work to give an even shadee

Providing & fixing Brass Sliding door bolts bright finished or black enamelled with nuts & screws etc. complete (a) 300x16

Providing & Fixing Brass Tower bolts with screws & nuts complete, (a) 250x10 mm

Providing & fixing M.S. Hookes and eyes.(a) 150mm

Supplying door & window clamps with 40mmx6mm F.B.80cm long i/c .bends.

Providing & fixing Brass Handles with screws & nuts complete,(a) 125mm

Steel woek in single sections, i/c cutting, hoisting, fixing in position & applying a priming coat of red lead paint.

Supplying H.D. bolts 106 cm. long with 16mm dia iron rod for fixing the plate i/c. cost of nuts

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast iron P or S trap 10 litre lowlevel white PVC. flushing cistern i/c flush pipe ,manually controlled device (handle level) conforming to IS 7231 with alliiting and fixture complete i/c cutting and making good the wall and floor, wherever required: i) white vetreous chinaorissa pattern W.C pan of size 580 x 440 mm with integral type foot rests.

Providing and Fixing wash basin with C.I. brackets, 15mm dia cp Brass single hole basin mixer of approved quality andmake, including painting of fittings and brackets, cutting and making good the walls wherever required:-White vitreous chinaWash basin size 550X400mm with a 15mm cp Brass single hole basin mixer.

Providing & fixing 50mm HCI pass over pipe

Providing and fixing P.V.C. waste pipe for sink or wash basinm i/c P.V.C. waste fittings complete. 32mm dia

Providing & fixing 100mm HCI pass over pipe

roviding & fixing 50mm HCI soil waste and vent pipepass over pipe.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps including trenching and etc.(internal work).(a) 20mm diameter.

(b) 15mm diameter

Providing and fixing brass stop cock of approved quality

IEI Component (Prov. IEI in the Convention Center)

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5mm2 FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit with piano type switch phenolic laminated sheet suitable size MS-box and earthing the point with 1.5mm2 FR PVC insulated copper conductor single core cable etc.as reqd.

Group A

Group B

Group C

Wiring for light point/power plug with 2X4mm2 FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit with 1 No. 4mm2 FR PVC insulated copper conductor single core cable for loop earthing etc.as reqd.

Wiring for circuit/Sub-main wiring with earth wire with (the following sizes of) FR PVC ins.cu.cond single core cable in surface/recessed PVC conduit etc.as reqd.

2X1.5mm2+1X1.5mm2 earth wire

2X2.5mm2+1X2.5mm2 earth wire

2X4mm2+1X4mm2 earth wire

2X10mm2+1X10mm2 earth wire

2X16mm2+1X16mm2 earth wire

Supply and fixing (following piano type switch/socket) on the existing switch box/cover i/c connection etc as reqd.

5/6 amps switch

15/16 amps switch

3 pin 5/6 amps socket outlet

6 pin 15/16 amps socket outlet

P/L 25mm2 four core pvc ins.(heavy duty) Cu. cond. armoured cable of 1.IKV grade in size not exceedng 16mm2 direct in ground i/c excavation, sand cushioning protective covering and refilling the trench etc.as reqd.

S/F brass batten/angle holder i/c connection etc.as reqd.

SITC surface mounted LED Down Lighter with white powder coated Al. housing with integrated electronic driver 15 W 840 LHEAAGP6PL1W010 complete with connection as rqd. (Havell's)

S/F Fancy wall bracket suitable for 9/12W complete with all accessories i/c connection etc. as reqd.

S/F surface/pendent mounting 1x18 W LED lamp channel luminaries complete with all accessories and connection etc as reqd.

S/F fan hook i/c bolt & nuts.

S/F Extra conduit download of 20mm dia 2x10 cm lamp wiring with 2x1.5mm2 FR PVC inulated cu. Cond. Cable i/c painting etc. as reqd.

S/F 48"sweep (1200mm) AC ceiling fan complete with down rod,canopy, 3 (three) blades with regulator etc.as reqd. (Make Bajaj/Usha or Similar)

S/F step type electronic fan regulator on the existing modular plate switch box i/c connection but excluding modular plate etc. as reqd.

Installation of exhaust fan upto 450mm sweep in the existing opening i/c making the hole to suit the size of the above fan, making good the damaged, connection testing commissioning etc. as reqd.

S/F 12"(305mm) dia light duty exhaust fan complete with all accessories(usha/ Bajaj/ Orient)

S/F 18"(450mm) dia light duty exhaust fan complete with all accessories(usha/ Bajaj/ Orient)

S/F 12W LED bulb.

SITC 50W LED 5000K energy saving IP65 Flood Light Luminaries with high power COB LED as light source Havells LHEPBFUEIN6W050 complete with connection as reqd. (Havells)

Supply, Installation, Testing & Commissioning of solar LED street light with in built SCC system wattage of 30 W of Havell's make code no.LHSTAQU7AAGI030 with 3150 lumen system output, 120 Wp high efficiency crystaline solar SPV panel and100 Ah tubular lead acid battery and G.I.tubular pole of 6mt.hight. The solar charge conroller is of Microprocessor based MPPT make, and battery should be housed in a box made of galvanized steel and powder coated at a height of 3 mt. including connection and muffling of size 0.45x0.45x0.45 Cum top in c.c. 1:3:6 ( 1 cemt:3 c/sand: 6 stone aggrt of 40 mm n/size) including centering, shutturing, earth work etc.as reqd.

S/F 25 amp Air-Conditioner power plug point i/c 4 modules metal box on surface or in recess 4-modules plate and cover in front, 25 amp modular starter 25 amp modu;ar socket outlet and 25 amp plug i/c conection etc. as reqd.

S/F 1.5 tone 5 STARS, INVERTER SERIES split type Air conditioner i/c AC stand, with all accessories such as cu. Pipe, insulation, line wire, gas charging etc. make Samsung. Model No. AR18RV5HET.

S/F bus bar chamber with 4 strips copper bus bar length 300mm suitable for 100 amp capacity complete with all accessories i/c connection earthing the body etc.as reqd.

S/F wall/floor mounted metal board of welded constn.fabricated with minimum 50mm X 50mm X6mm angle iron frame work with horizontal and vertical intermediate members of suitable angle/flat iron for mounting of switch gear i/c painting etc.

S/F (following way) single/double pole and nuetral, sheet steel MCCB distributuion board, 240V on surface/recessed complete with tinned copper bus bar neutral bus bar, earth bar,din bar detachable gland plate, interconnection, phosphatized and powder painted i/c earthing etc as reqd (but without MCB/RCCB/Isolator) (a) 2+4 way

S/F (following way) single/double pole and nuetral, sheet steel MCCB distributuion board, 240V on surface/recessed complete with tinned copper bus bar neutral bus bar, earth bar,din bar detachable gland plate, interconnection, phosphatized and powder painted i/c earthing etc as reqd (but without MCB/RCCB/Isolator) (a) 2+6 way

S/F (following way) single/double pole and nuetral, sheet steel MCCB distributuion board, 240V on surface/recessed complete with tinned copper bus bar neutral bus bar, earth bar,din bar detachable gland plate, interconnection, phosphatized and powder painted i/c earthing etc as reqd (but without MCB/RCCB/Isolator) (a) 4 way

S/F 5 amp to 32 amp rating 230V 'B' series MCB for lighting and other load of (following poles) in the existing MCB DB complete with connection testing and commissioning etc.as reqd. (a) Single pole

Supplying & fixing (following rating) double pole 240V isolator in existing MCB DB complete with connection testing & commissioning as reqd. (a) 40 amp

P/F 300x450x60mm(n/size) with permissible variation of plus minus 5mm in size hylum fibre board complete with locking arrangement and painting etc.

Earthing with copper plate 600x600xmm thick i/c accessories and providing masonary enclosure with copper plate having locking arrangement and watering pipes etc.(but without charcoal and salt complete as reqd.)

Extra for using salt and charcoal for G.I.plates or copper plate earth electrode as reqd.

P/F 4.00 mm dia copper wire on surface or in recess for loop earthing as reqd.

(Sh: Providing IEI in the Dining Hall)

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5mm2 FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit with piano type switch phenolic laminated sheet suitable size MS-box and earthing the point with 1.5mm2 FR PVC insulated copper conductor single core cable etc.as reqd.

Group A

Group B

Group C

Wiring for circuit/Sub-main wiring with earth wire with (the following sizes of) FR PVC ins.cu.cond single core cable in surface/recessed PVC conduit etc.as reqd.

2X1.5mm2+1X1.5mm2 earth wire

2X2.5mm2+1X2.5mm2 earth wire

2X4mm2+1X4mm2 earth wire

2X10mm2+1X10mm2 earth wire

Wiring for light point/power plug with 2X4mm2 FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit with 1 No. 4mm2 FR PVC insulated copper conductor single core cable for loop earthing etc.as reqd.

Supply and fixing (following piano type switch/socket) on the existing switch box/cover i/c connection etc as reqd.

5/6 amps switch

15/16 amps switch

3 pin 5/6 amps socket outlet

6 pin 15/16 amps socket outlet

P/L 4mm2 twin core pvc ins.(heavy duty)Cu. cond. armoured cable of 1.IKV grade in size not exceedng 25mm2 direct in ground i/c excavation,sand cushioning protective covering and refilling the trench etc.as reqd.

S/F brass batten/angle holder i/c connection etc.as reqd.

S/F surfacemounted round/square LED down lighter 1x15 W LHEAARP7ULIW0012/LHEAASPTULIW0012 with durable housing with Al. heat sink with diffuse to give glare free light with removable driver complete with connection as reqd. (make Havells)

S/F fan hook i/c bolt & nuts.

S/F 48"sweep (1200mm) AC ceiling fan complete with down rod,canopy, 3 (three) blades with regulator etc.as reqd. (Make Bajaj/Usha or Similar)

S/F step type electronic fan regulator on the existing modular plate switch box i/c connection but excluding modular plate etc. as reqd.

Installation of exhaust fan upto 450mm sweep in the existing opening i/c making the hole to suit the size of the above fan, making good the damaged, connection testing commissioning etc. as reqd.

S/F12"( 305mm) sweep exhaust fan complete with accessories i/c connection etc. as reqd.

S/F 12 W LED bulb

SITC 50W LED 5000K energy saving IP65 Flood Light Luminaries with high power COB LED as light source Havells LHEPBFUEIN6W050 complete with connection as reqd. (Havells)

P/F 60 amp MCSPN switch unit 240/250v with rewireable fuses i/c drilling holes on the board connection, earthing the body etc.as reqd.

S/F (following way) single/double pole and nuetral, sheet steel MCCB distributuion board, 240V on surface/recessed complete with tinned copper bus bar neutral bus bar, earth bar,din bar detachable gland plate, interconnection, phosphatized and powder painted i/c earthing etc as reqd (but without MCB/RCCB/Isolator) (a) 2+6 way

S/F (following way) single/double pole and nuetral, sheet steel MCCB distributuion board, 240V on surface/recessed complete with tinned copper bus bar neutral bus bar, earth bar,din bar detachable gland plate, interconnection, phosphatized and powder painted i/c earthing etc as reqd (but without MCB/RCCB/Isolator) (a) 2+4 way

S/F 5 amp to 32 amp rating 230V 'B' series MCB for lighting and other load of (following poles) in the existing MCB DB complete with connection testing and commissioning etc.as reqd. (a) Single pole

Supplying & fixing (following rating) double pole 240V isolator in existing MCB DB complete with connection testing & commissioning as reqd. (a) 40 amp

P/F 300x450x60mm(n/size) with permissible variation of plus minus 5mm in size wooden board complete with locking arrangement and painting etc.

Earthing with G.I.earth pipe 4.5mt.long and 40 mm dia. i/c accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc.as reqd.

Extra for using salt and charcoal for pipe electrode as reqd.

P/F 4.06mm dia.copper wire on surface or in recess for loop earthing etc.as reqd.

Guigui Kamei

M Gunananda Sharma