Provn of work stations and allied wks at Bldg No P-16 B of HQ MUPSA alongwith Addn/Altn of store room in Bldg No P-84 at HQ Central Comd under GE (East) Lucknow.

Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete complete all as specified & directed.

Demolition of Reinforced cement concrete in suspended slabs, beams, lintels etc. in cement mortar or cement concrete (reinforcement cut as required to facilitate demolition)

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in in CM (1:6) complete all as specified & directed.

Taking down cement plaster on brick walls / ceiling incl. raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed..

M&L for rendering 10mm thick in CM 1:6 brick work or concrete surface and finishing the surface even and smooth without using extra cement all as specified and directed.

M&L for preparation of old decorated surfaces and applying two coats of white wash on ceiling complete all as specified and directed.

M&L for preparation of new plastered surface of wall including wall care putty 2mm thick and applying Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work complete all as specified and directed.

M&L for Complete removal of exiting treatment of wall including wall care putty 2mm thick and applying Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification Two or more coats complete all as specified and directed. all as specified and directed.

M&L TMT 10mm dia and over cut to length, bent to shape required incl. cranking, bending and incl. mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

M&L TMT 6mm to 8mm dia cut to length, bent to shape required incl. cranking, bending and incl. mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

M&L, 20 mm thick granite (of any type and colour ) work (table rubbed and polished ) in steps, Jambs, pillars, window cills, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust and admixture of pigment to match with shade of granite complete all as specified.

M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.

M&L for Providing precast cement concrete in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in mortar complete with joints to match

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing and rubbish off the premises

S&F vitrified tiles light shade 10mm thick (Square/rectangular) polished area of each tile exc 0.42 Sqm but n.exc 1.00 Sqmin floor etc laid over 20mm thick screed bed in CM (1:6) set and jointed in neat cement slurry and pointed in white/coloured cement to match complete all as specified and directed. Note : Tiles fixed with 3-5mm thick spacer and joint filled with epoxy grout (No EXTRA payment will be paid for spacer&epoxy grout)

Ditto as above item No.15 but laid over 10mm thick in CM (1:3) as skirting etc complete all as specified and directed.

S&F of solid strip PVC Wall Linning ( dual shade ) consisting of 6mm thick (Heavy duty) any color/ desigened PVC sheet inclusive of nails and fixing at site on wall with strip frame grid as per manufacturers instructions and PVC L-beading at top of wall lining,corner of wall, opening eadge of door & windows with adhesive matching with panel as per specifications and drawing complete all as specified and as directed.

All as per Item No 41 hereinbefore but point wiring complete with 2.5 sqmm for 3 pin 5/15 A socket outlet on independent board including 2.5 sqmm FRLS grade PVC insulated unsheathed multi stranded copper conductor cable for earth continuity conductor all as specified.

M&L for P.O.P cornic size of 150x150mm any design for gypsum board at false ceiling corner etc complete all as specified and directed.

Taking down chowkat or frame with shutters area exc 1.5 Sqm but not exc 4 Sqm each (without taking off the shutters from the frame) including iron mongery and cutting holes for hold fasts & making good complete all as specified & directed.

S&F of Powder coated aluminium frame for doors,windows, ventilators with one or morerebates including joining cleat for fixing etc. complete all as specified

S&F powder coated alumium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. complete all as specified

M&L for 12 mm thick Prelaminated particle board, interior grade,prelaminated both side with decorative choice lamination ,fixed with screws to timber frame work, complete all as specified & directed.

S&F of sheet glass 4.80mm thick,ordinary quality and glazing with aluminium snap beading in squares n.exc 0.5 sq. m in each pane complete all as specified & directed.

S&F supply and fixing factory made uPVC Prelaminated colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wiremesh panels) upto 1.50m height made of (big series) frame116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead /double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremeshshall be paid separately)

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified & directed.

S&F of sheet glass 4mm thick,ordinary quality and glazing with aluminium snap beading in squares n.exc 0.5 sq. m in each pane complete all as specified & directed.

S&F powder coated aluminium grill (opening of grill not more than 80x80mm) fixed to windows or ventilators with powder coated aluminium U channel 25x12mm size with powder coated aluminium frame size 25x40x1.20mm etc complete all as specified and as directed.

S&F Venetian blind of vista brand with horizontal venetian complete of best quality complete all as specified and directed by Engr-in- Charge

M&L for block board, 18/19mm thick, grade 1 quality, exterior grade, commercial type, fixed with screws to timber frame work complete, all as specified & directed.

S& F 0.9 mm thick Decorative laminate type-1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturers instruction as complete all as specified and directed.

S&F 150 mm long fancy stainless steel handle for cupboard & wardrobe shutter complete all as specified and as directed by Engr-in- Charge

S&F magnet catcher for cabinet shutter all as specified and directed.

S&F continous piano hinges of mild steel, bright finish or electro galvanised with width 30mm of flap .

M& L rendering 15 mm thick in cement mortar 1:6 on other than fare faces of brick work or concrete surfaces and finishing the syurface even &smooth without using extra cement incl taking down of plaster complete all as specified and as directed.

M& L rendering 15 mm thick in cement mortar 1:4 on other than fare faces of brick work or concrete surfaces and finishing the syurface even &smooth without using extra cement incl taking down of plaster complete all as specified and as directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil distemper (OBD) of approved shade over a coat of primer complete all as specified

M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint of approved shade over a coat of primer complete all as specified

M&L for Vitrified Ceramic tiles dark shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over 15 mm thick screed bed including dismantling of tiles complete all as specified and directed

M&L for powder coated (min 50 micron) aluminium three track sliding window with extruded profile of top bottom & side track for fixing 5.5 mm thicktinted glass fitted with glazing clips and EPDM rubber in two shutters and fixing SS wire mesh in one shutter and powder coated deco grill including roller and handle, maruti locking arrangement complete all as specified and directed.

M&L for point re-wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 sqmm and earth continuity conductor with 1.5 sqmm colour code drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 25 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken modular GI metal boxes 1mm thick and modular cover plate with frame of approved colour for mounting modular switches, sockets etc as required for the following.

All as per Item No 41 hereinbefore but for One 5 A socket outlet on same Board all as specified.

Supply and fix Rigid non-metallic PVC conduit exclusive of boxes (junction/terminal) but inclusive of all tees, bends,elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc.PVC pipe 25 mm dia for protection of cables all as specified .

Supply and fix in renewal Modular switch one way 6A 230V AC 50 HZ SP one module all as specified.

Supply and fix in renewal Modular switch one way 16A 230V AC 50 HZ SP one module all as specified.

Supply and fix in renewal Modular socket 2/3 pin combined 6A 230V AC 50 HZ SP two module all as specified.

Supply and fix in renewal Modular socket 6A/16A 2/3 pin combined 230V AC 50 HZ SP two module all as specified.

Supply and fix in renewal MCB SP 230V, 6-32 Amps capacity all as specified .

Supply and fix in renewal repair of MCB DB SPN 8 way double door type including necessary dummy plate and necessary civil works all as specified .

Supply and fixing in renewal 240V, 10KA 'C' curve miniature circuit breaker (MCB) SPN 40 Amp-63 Amp.

S&F in renewal modular bell push single pole 1 module 6 Amp, 240 volt all as specified.

S&f in renewal call bell , ding dong / musical AC single phase 230 volts all as specified.

S&F in renewal Ceiling rose polycarbonate complete all as specified.

Supply, installing, commissioing and testing , split Air Conditioner of capacity not less than 18000 btu/hr or 5280 watt (1.5 TR) Hot & Cold with BEE 5 star, rotary compressor , Nano Titanium filter, auto clean function, indoor sound level 32 db, front panel display, wireless LCD remote, precoated aluminium fins, 477 cfm air circulation , auto fan speed, electric driven , suitable for working on 230 volts, single phase, 50 Hz supply complete including cutting of wall, providing stand for out door unit and making good disturbed surface of wall etc and remote operation complete.

Supply & Install Voltage stabilizer automatic boost/buck transformer for low and high voltage with electronic transistorised relay/ time relay for two min , SP, 50 Hz with volt meter indicator and input voltage 140 to 280 and cut up voltage 215 to 240 V cap 4 KVA.

Supply and fixing recess mounting LED light fitting 2'x2' luminaire architectural recessed luminaire( White/Warm white colour) with CRCA housing and Molded PC diffuser with an unique angular optics for making the illumination easy on eyes for light comfort in office areas with UGR<=19. The luminaire should have a color consistency SDCM< 5, CRI > 80 and choice of CCT: 5700K. Luminaire shall be designed to emit at least 3000 lumens and an efficacy of atleast 120Lm/W and maximum system wattage of 36 Watt, designed for ambient temp 45 deg C. The metallic electronic driver shall have a power factor >0.95, THD <10%, 4KV internal surge protection and the Ripple factor should be <5% to minimise the Flicker and Stroboscopic effect and The driver should be complied with Fixed output/DALI/POE version and Fixture should have an operating voltage range of 140-270VAC incl It should have over voltage protection @320V Cut-off with auto restart features. all as specified.

S&F in replacement decorative wall mounted fancy light fitting made up of brass rubi lamp brand Single handed including of bulb of 9-15 watts covered by glass complete all as specified.

Material and Labour for Submain wiring with 2 runs of FRLS grade PVC copper conductor cable 4 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 4 Sqmm drawn through and including PVC Conduit pipe 25 mm dia with all fittings all as specified.

Material and Labour for Submain wiring with 2 runs of FRLS grade PVC copper conductor cable 6 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 10 Sqmm drawn through and including PVC Conduit pipe 25 mm d

ia with all fittings all as specified .

Material and Labour for Submain wiring with 4 runs of FRLS grade PVC copper conductor cable 16 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 10 Sqmm drawn through and including PVC Conduit pipe 32 mm dia with all fittings all as specified .

S&F ceiling fan 1200 mm sweep BEE star rated 5 with brush less direct current (BLDC) motor ,class insulation B three no blade up to 90 cm long down rod , canopies ,shackle kit , safety rope,copper winding , PF not less than .9, service value (CM/M/W) minimum 6.00,air delivery minimum 210 cum/min,350 RPM(Tolerence as per IS: 374-2019),THD less than 10%, remote unit for speed control and all remaining accessories including safety pin,nut bolts,washers,temperature rise 75 degree C (max),insulation resistance more than 2 mega ohm suitable for 230 volts ,50 hzincluding remote control.

Supply and fixing of wall fan of 300 mm sweep, 220 - 240 volts, AC, 50 Hz 1330 RPM, 55 Watts power input, air delivery 65 Cum/min with all accessories complete.

Supply and fix single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one 20 amps SPN MCB all as specified.

Material and labour Earthing complete with galvanized steel earth plate electrode 60 cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanized earth wire of size 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No 3 connected to earth testing point including necessary excavation, earth work, PCC pit ,RCC cover 1:2:4 B1 with 8 mm dia MS rounds 1.5 kgs, funnel ,watering pipe etc. all specified and directed including testing on completion all as specified.