Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹39.3 LAccepted-AOC | L-1 | Accepted-AOC Accept | |
| 2 | L-2₹40.9 L+₹1.6 L (4.03%)Rejected-Finance | L-2 | Rejected-Finance High Rates | |
| 3 | L-3₹43.6 L+₹4.3 L (11.0%)Rejected-Finance SHOP NO 2 JANKI PLAZA BHAGWAN MAHAVIR PATH KOPARGAON AHMEDNAGAR MAHARASHTRA 423 601 | KOPARGAON | AHMEDNAGAR | MAHARASHTRA | 423601 | L-3 | Rejected-Finance High Rates | |
| 4 | L-4₹45.7 L+₹6.4 L (16.3%)Rejected-Finance | L-4 | Rejected-Finance High Rates | |
| 5 | L-5₹47.7 L+₹8.4 L (21.3%)Rejected-Finance | L-5 | Rejected-Finance High Rates |
Tender Value
₹43.7 L
EMD Value
₹87,360
Closing Date
15 Jun 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer (MCTE)
GE(MCTE) Mhow
PROVN OF TOILET BATHROOM FOR TRAINEE OR ACCN UNDER GE (MCTE) MHOW
2024_MES_654290_1
GE(MCTE)/MHOW/6 (T) OF 2024-25
Open Tender
Civil Works
Works
180 days
GE (MCTE) Mhow
As per Tender Document
9 documents required · 9 mandatory
₹500
Yes
GE (MCTE) Mhow
₹87,360
Yes
7 Nov 2024
17 May 2024
17 Jun 2024
17 May 2024
15 Jun 2024
1 Jun 2024
Amount
B/R WORK
Surface excavation n. exc 30cm deep and averaging 15cm deep and getting out in hard/ dense soil, complete all as specified
Excavation in trenches, n. exc 1.5 m wide and n. exc 1.5 m in depth; for foundation etc. and getting out in hard/ dense soil complete all as specified
M & L for Treating the top surface of the filled earth @ 5.00 ltr of emulsion per sqm of surface area with ATT, complete all as specified
M & L for Treating the soil along with internal periphery of room at the rate of 2.25 litre of emulsion per metre of surface area with ATT, complete all as specified
M&L forTreating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall, complete all as specified
M&L for Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area, complete all as specified
M & L for Cement concrete in foundations,filling and mass concrete 1:4:8 type D2 using for column footing, plinth beams etc complete all as specified
M&L for RCC (nominal mix) Type B-1 1:1.5:3 (20mm graded aggregate) for foundation, including rafts, footings, foundation beams, plinth beams, bases for columns etc, basement slabs, under remaed piles and mass concrete complete all as specified
M&L for RCC (nominal mix) Type B-1 1:1.5:3 (20mm graded aggregate) for columns, pillars, piers, posts and struts complete all as specified
M&L for RCC (nominal mix) Type B-1 1:1.5:3 (20mm graded aggregate) for beams, cantilevers, bressummers, structs, complete all as specified
M&L for RCC (nominal mix) Type B-1 1:1.5:3 (20mm graded aggregate) for slabs supported on walls, beams and column in floors, roofs, landings, balconies, canopies, deck slabs, and in shelves and the like, complete all as specified
M&L for RCC (nominal mix) Type B-1 1:1.5:3 (20mm graded aggregate) for chajjas supported on walls, beams and column in floors, roofs, landings, balconies, canopies, deck slabs, and in shelves and the like, complete all as specified
M&L for mild steel TMT Bars 10mm dia and over cut to length bend to shape required including cranking bending spirally for column, hooking ends & binding with and including mild steel mild steel wire (annealed not less that 0.90 mm dia or securing with clips). complete all as specified
All as per Sl item No-14 above but 5mm dia and over upto and incl 10mm dia in stirrups, spacers and binders. complete all as specified
All as per Sl item No-14 above but 6 to 8mm dia bar.
Ues & waste of Form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter with rough finished sufraces of concrete
Ues & waste of Form work to sides of pillars, posts, struts, piers, columns and stanchions with fair finished surfaces square complete all as specified
Ues & waste of Formwork to sides and soffits of floor or roof beam, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves includings supports, overhangs, etc also splays between floors and beams, complete all as specified
Ues & waste of Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified
Ues & waste of Formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified
Earth filling with approved soil/ morooum brought from out side MD land, filling in trenches or paving laid in layers not exceeding 25 cm thick spread, levelled and rammed including watering etc complete all as specified and directed.
M&L for broken stone or bounders hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a floor/true surface.complete all as specified
M & L for 100mm thick PCC type D-2 1:4:8 (40mm graded stone aggt) in sub base of floor, complete all as specified
M & L for 50mm thick PCC type B-2 1:2:4 (20mm graded stone aggt) in top layer of floor to be finished even and smooth with using extra cement complete all as specified.
M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified
M&L for glazed coloured ceramic tiles, first quality (or approved class, colour and design/shade) of 350 x 250 x 7mm/ 450 x 300 x 7mm thick in vertical surfaces, as in dado/skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with coloured tiles, over and including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.
Returning fillng in, including spreading, levelling, watering and well ramming in layers not exc 25cm complete all as specified and directed.
Removing excavated material exc 1.5 km but n exc 5 km away from MoD Land form the starting point, complete all as specified
M&L for PCC 75mm thick type B2 (1:2:4) using 40mm graded stone aggregate) in plinth protection incl making surface smooth without using extra cement, joints should be filled with bitumen etc, complete all as specified and as directed.
M&L for Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:6 Complete all as Specified and directed
M&L for Brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick wall built in CM 1:4 Complete all as Specified and directed.
M&L for Rendering 15mm thick on fair faces of concrete/ brick surfaces in cement mortar 1:4 mixed with water proofing compound as per manufacturer's instruction, finished fair and even without using extra cement complete all as specified. Note :- WPC shall be measured and paid for seprately as supply only under respective item of sch A.
M&L for Rendering 15mm thick on fair faces of concrete/ brick surfaces in cement mortar 1:6, finished fair and even without using extra cement complete all as specified and directed.
M&L for Rendering 5mm thick on fair faces of concrete/ brick ceiling surfaces in cement mortar 1:4, finished fair and even without using extra cement complete all as specified and directed.
M&L for Rendering 20mm thick in cement mortar 1:4 on the roof slab while the concrete is green, mixed with water proofing compound as per manufacturer's instruction, finished fair and even without using extra cement complete all as specified and directed. Note :- WPC shall be measured and paid for seprately as supply only under respective item of sch A.
Supply only liquid water proofing compound.
M&L for preparation of new surfaces and applying two coat of oil bound distemper with roller on new treated surfaces of wall incl primer etc complete all as specified .
M & L for preparing newly suraces and applying three coat of white wash on ceiling,complete all as specified
M & L for preparation of new wall surfaces and applying two coats exterior emulsion weather proof paint over one coat of exterior wall primer complete all as specified .
S&F Pressed steel door frame for single door, size 105 x 60mm x 1.25mm thick with one rebates incl necessary fixing lugs, hinges, lock strike plate, holdfast (size 25mm x 3mm of length 30 cm) etc., complete all as specified and as directed.
M & L for PCC 1:2:4 type B0(12.5 mm graded) aggregate for filling in pressed steel door frame.
M & L for painting to steel surfaces of any description over 10 cm width or girth with 2 coats of synthetic enamel paint to steel surfaces
M&L for Preparation of new wooden surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specifed and directed.
S&F 35mm thick Flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides complete all as specified and directed.
S&F solid PVC door frame of size 50mm x 47mm with a wall thickness of 5mm mde out of exruded 5mm single side prelaminated PVC foam sheet, mitre cut at two corners and jointed with 2 Nos of 150mm long brackets of 15mm x 15mm M. S square tube. The two vertical door profiles are to be reinforced with 19 x 19mm M S square tube. The door frame shall be fixed to the wall using 65/ 100mm long M.S screws through the frame by using PVC fasteners. A minimum of 4 Nos of screws to be provided for each vertical member etc. complete all as specified & shown on drgs of SSR Part-II
S&F factory made Factory made solid panel PVC door shutter 30mm thick both side pre-laminated consisting of frame made out of M.S. tube of 19 gauge thickness adn size of 19mm x 19mm for style and 15 x 15mm for the top and bottom rails, MS frame shall have a coat of steel primers of approved make and manufacture. MS frame covered with 5mm thick heat moulded PVC 'C' channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20 mm shall be tappered in 45 degree angle on either side forming styles and 5mm thick 95mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered on both sides to form lock rails. Top bottom and lock rails shall be tapered on both sides to form lock rails. Top bottom and lock rails shall be provided either side of the panel. 10mm (5mm x 2) thick 20mm wide side cross PVC sheet be provided asgap insert for the top rail and bottom rail. Panelling of 5mm thick both side PVC sheet to be fitted in the MS frame welded/sealed to the styles and rails with 7mm (5mm + 2mm) thick x 15mm wide PVC sheet beading on inner side and joined togehter with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the 'C' channel using PVC solvent adhesive etc. complete as per direction of Engr-in-Charge. manufacturer's specification & drawing (for W.C and bathroom door shutter. all as specified and directed by Engr-in-Charge & shown on drgs of SSR Part-II.
S&F 150mm size aluminium, anodised barrel tower bolt of extruded section.complete all as specified
S&F 300mm length, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy.complete all as specified
S&F 150mm size extruded aluminium alloy handles, fabricated type.complete all as specified
S&F Stainless Steel 100mm size, butt hinges, complete all as specified
S &F Vitreous china, wash down water closet pan (pedestal pattern), white, including plastic water closet seat cover, closed pattern with flat bottom, connection to drain (or outgoing pipe) and to flushing pipe, antisiphonage pipe etc, complete all as specified
S&F in vitreous china sqatting pan (orissa pattern) size 630mmx 450mm, white with integral foot rest, any pattern including provision of cement concrete bedding (excluding fulshing cistern and flush pipe) including S or P trap, Fixed, complete all as specified and directed
S&F in low level Flushing cistern 10 ltr capacity, PVC valveless syphonic action type, white with inlet, ball valve, float valve and handle, flush pipe, incl brackets and flushing pipe fixed in repairs complete all as specified and directed
S&F 15mm size PVC connections internally threaded with PVC washer, PTMT nuts of length 450mm complete all as specified and directed.
S&F 15mm size PVC connections internally threaded with PVC washer, PTMT nuts of length 600mm complete all as specified and directed.
S & F Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe), complete all as specified
S&F Urinal spreader of brass Chromium plated for fixing with 15mm dia pipe. complete all as specified
S&F for Towel Ring of brass chromium plated fixed with and including SS screws and wooden/plastic cleats Complete all as specified and directed
S&F SS Towel Rail 600mm long fixed with and including SS screws and wooden/ plastic cleats. (Minimum weight 190gms), complete all as specified
S&F SS Grating doom 100mm dia complete all as specified.
S&F Shower arm 15mm size, 125mm long with flange complete all as specified
S&F Liquid soap container/ dispenser fixed with and including SS screws and wooden/plastic cleats. complete all as specified
S & F Stop/angle cock 15mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions. complete all as specified
S&F 15mm bore bib tap cast copper alloy (fancy type), chromium plated, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as directed.
S&F for chromium plated brass wall mixer 2-in-1 fancy type with provison for overhead shower complete with wall flange (without over head Shower) screwd down for 15mm GI bore pipe complete all as specifed and directed.
S & F Corner Glass Shelf of Size 320 x 320mm with Silver chromium finished border Oval Range premium quality all as specifed and directed by Engr-in-Charge.
S & F Stainless Steel Soap Dish fixed to wall all as specified and directed by Engr-in-Charge complete all as specified.
Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduitwiring, etc. and making good, cutting exceeding 20cm girth complete all as specified and directed
S&F, laying and testing for 15mm bore GI tubing medium grade galvanised steel tubing including all fittings such as union, reducer, sockets, reducing bends elbows tee, checknuts, caps, plugs etc fixed to wall and ceilling or laid in floors complete all as specifed and directed.
S&F Granite 20mm thick (of any type & approved colour) work (table rubbed and polished) in steps, jambs, pillars, table top for wash basin, urinal partition, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite
S&F Granite 25mm thick (of any type & approved colour) work (table rubbed and polished) in steps, jambs, pillars, table top for wash basin, urinal partition, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified
M&L for rounding/ chamferring to edges of stone slabs one edge, such as in steps, cooking plateform and other similar situations etc all as specified.
S&F powder coated aluminium sliding window three track with two glass shutters using 5mm thick glass tinted modi guard and one shutter with stainless steel wire gauge wire cloth 0.31mm nominal dia of wire and width of aperature 1.61mm using aluminium powder coated section aluminium cleat, PVC track, bearing, handle, lock, rubber beading etc complete all as specified
S&F powder coated anodised aluminium ventilator, half portion of the ventilator covered with 5.5mm thick frosted glasses and half portion fittted with frosted louvers and outer side fitted with mosquito proof galvanised wiremesh incl all fittings, accessories etc complete all as specified
S&F rotational moulded polyethylene water storage tanks 1000 lts capacity (cylindrical vertical with closed top) hoisted with and including 20mm bore ball brass valves, high pressure with polythene float and fly nut complete screwed for iron pipe or for brass ferrule and fixed in position all as per SSR Part-I complete all as specified.
S&F 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified
S&F HDPE 150mm dia double wall corrugated sewage pipe SN-8 as per IS 16908 Part-II 2013 laid in trenches, jointed and tested as per manufacturer instruction Complete all as specifed and directed
M & L for cement concrete bed in PCC (1:3:6) type C-2 (using 40mm graded stone aggregate) including packing under and haunching against sides of pipes after they are laid and tested complete all as specified and directed, for the following sizes: - Note:- Thickness of bed below the barrel of pipe 10cm for pipe 100mm and 150mm dia, 15cm for 200mm dia & over complete all as specified
M&L for PCC 100mm thick type C2 (1:3:6) using 40mm graded stone aggregate as in sub base of man holes etc complete all as specified and as directed.
M & L for PCC 1: 2 :4 type B-1 (using 12.5mm graded crushed stone aggregate as in surface channels and drains including necessary form work complete all as specified and directed.
M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete ,using extra cement, including forms, moulds, miterd/ stopped ends etc complete all as specified and directed
Add or deduct to item No.82 above for each 25mm girth or part thereof over or under 30 cm complete all as specified
M & L for Water proofing on roof/parapet with the follwing steps with 10 years gaurantee & testig for water tightness:- STEP-1. Firstly to clean the existing surface of the roof peparation and making the surface dust free. STEP- II. Opening Crack more than 0.5mm in V groove and filling with epoxy mortor. STEP-III. Initial coat (mixed 1/2 liter of water in 1 liter of Roof seal of Asian paint/ PIDILITE/ STP/ FOSROC/ ACC/ L&T/ MARUIT. Dr. Fixit) as a primer (Area cover 1 liter=9-1 sqmtr) STEP-IV. After six hours of primer, apply first coat (one coat) of Asian paint/ PIDILITE/ STP/ FOSROC/ACC/ L&T/MARUIT. Dr.Fixit roof seal in a particular direction without mixing of water. Now left it for six hours (At the rate 0.70-0.75 lit per Sqm). STEP-V. Lay down a 45 GSM fiber glass mesh into the coating as a sandwich layer while the first coat is still wet. STEP-VI. After again six hours of first coat and apply the second coat of Dr.Fixit Roof seal in a other direction without mixing of water (At the rate 0.70-0.75 litper Sqm). and leave it for 24 hours. all as specified and directed by Engr-in-Charge. Note:- The work of water proofing treatment shall be got executed through expert team of manufacturers of authorised applicator of manufacturer. Make Asian paint/ PIDILITE/ STP/ FOSROC/ ACC/ L&T/ MARUIT or equivalent approved by the GE.
S & F under counter ivory wash basin, vitreous china size 560x410x180 mm including cutting for and pinning in ends of brackets or erecting stand but incl wastecoupling and brackets , fixing of supply and waste pipe, Rag Bolt Assy 3/8 " complete all as specified and directed.
S&F for chromium plated brass Central hole basinmixer without popup waste system complete screwed down for 15mm GI bore pipe complete all as specifed and directed.
S&F Brass Bottle Trap 300mm (12") Designer wall connection pipes and wall flange complete all as specified and diretced.
S & F two way Angle cock with Flange 15mm bore cast copper fancy type chromium plated alloy screwed down high pressure all as specifed and directed.
S&F Health Faucet ABS with 1.00 m Long Flexible Tube & ABS Wall Hook.
S&F 110mm bore PVC(SWR) pipes single soketed in any length with adhesive jointed fixed to wall with mild steel clamps complete all as specified and directed.
All as per Srl item No. 91 here -in-before but laid in trenches or in floors complete all as specified and directed
S&F 75mm bore PVC (SWR) pipes single soketed in any length with adhesive jointed fixed to wall with mild steel clamps complete all as specified and directed.
All as per Srl item No 93 here -in-before but laid in trenches or in floors complete all as specified and directed.
S&F in PVC (SWR) bends 110mm bore complete all as specified and directed.
S&F PVC (SWR) bends 75mm bore complete all as specified and directed.
S&F PVC (SWR) junction single (single T) equal or unequal 110mm bore complete all as specified and directed.
S&F for 75mm dia PVC (SWR) floor trap with grating including jointing with solvant cement including PCC 1:2:4 and making good the existing floor complete all as specified and directed.
S&F PVC (SWR) vent cowl 110mm dia complete all as specified and directed.
S & F factory made PVC shelf/ partition of required size consisting of panel of 18mm thick required size consisting of panel of 18mm thick celuka PVC ply and for supporting the hold of shelf/ partition and shall provided 3 edges in size 18mm x 18mm as per required lenght the front side of the edge visible in the front of the shelf/partition to be edge lipped by 18mm widht x 1mm thick PVC sheet of density 600 kg/cum manufactured by ISO 9001-2015 Certified Company, using solvent cement etc.
S&F 18mm thick factory made PVC sheet one side pre-laminated sheet ktichen cabinet shutter. The 18mm thick sheet shutter bent at 90 degree and finish all edges at level for marking edge lipping bending for 0.5mm thick PVC sheet lipping at all four edges using bonding tape etc complete all as per specified and directed by Engr-in-Charge manufactures specification.
S & F Continuous (piano) hinges, 30mm Width of flaps (when open) in mm brass, bright finish or electrogalvanised Continuous (piano) hinges, bright finish or electrogalvanised, complete all as specified
S&F 50 x 15mm size magnet door catcher for closing for PVC door shutter complete all as specifid.
S & F Aluminum handle cast type anodized size 75mm long, complete all as specified and directed.
S & F Machine pressed precast cement concrete coloured chemically treated interlocking paver block any shape and size conforming to IS-15658-2006 of 60mm thickness M-35 grade with grey cement and pigment etc over and incl 25mm thick uniformly levelled surface of stone dust cushioning. complete all as specified
M&L for PCC 1:2:4, type B-1 (using 20mm graded stone aggregates) as in coping, benching to hold to lower portion of chain link fencing complete all as specified and directed.
Supply of Sintex Anaerobic Septic tank (AST Model) made of FRP having capacity 25,000 litre as shown in our leaflet with inbuilt standard manhole with cover , provision for inlet, outlet & vent (sockets) within the tank , supply of factory made RCC deadman (concret block-to counter buoyancy) , suppy of necessary FRP straps, eye bolt , wire rope, turn buckle for anchoring the tank . The details are as under :- (a) Sintex, Anerobic septic tank (AST Model) , Capacity - 25,000 Lit of size 6740 mm (L) x 2340 mm (Dia ) ; MOC -FRP Tanks , Qty -01 (One). (b) PVC pipes (only internal aranagment ) - Inlet Pipe 6" , outlet pipe - 6" (Internal only). (c) FRP Strap - lenght - 01 Lot. (d) Turn buckle - MOC -CI - 01 Lot (e) Wire rope - MOC- MS - 01 Lot , (f) Concret Dead Man - AS per the length of the tank - 01 Lot. (g) Air vent nozzle - MOC - PVC -Size : 2" - 01 Lot. (h) Eye bolt - MOC - FI - 01 Lot. (j) manhole cover - manhole size - 550mm ; MOC - MS - as per the drawing. (k) Wire Lock - MOC -MS - 01 Lot. Note:- Suppy and Fixing of the tank be done through the company authorised applicator.
M&L for Brick work with subclass 'B' bricks in one brick thick honey comb walling built in CM 1:4 complete all as per specified and directed.
M&L for Brick bats using subclass 'B' bricks for loose filling in soak wells etc complete all as per specified and directed.
M&L for rendering 15mm thick cement plaster in cement mortar 1:4 on brick work/ Concrete surfaces finishing the surfaces even and smooth with out using extra cement complete all as specified and directed.
M&L for rendering 15mm thick cement plaster in cement mortar 1:4 on brick work/ Concrete surfaces finishing the surfaces even and smooth with using extra cement complete all as specified and directed.
M&L for RCC 1:2:4 type B-1 (using 20mm graded stone aggregates) as in slabs supported on walls as in soak well and septic tank etc complete all as specified and directed.
M&L for Pre-cast Reinforced Cement Concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in cover slab of man hole set in cement mortar 1:4 including demolition of existing broken cover slabs complete all as specified.
Use & waste of form work to edges of concrete flats, treads breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs not exc 10cm wide and sides of RCC/ PCC bands in walls, horizontal or slopping and similar works fair finished concrete surface complete all as specified and directed.
M&L for mild steel round bars 10mm dia & over, cut to length, bent to shape required, including cranking, bending as in manhole covers handles, steps, rungs etc complete all as specified and directed.
E/M WORK
M&L for concealed point wiring with PVC insulated and unsheathed, single core FRLSH cable of size 1.5 sqmm stranded copper conductor, 1100 Volt grade, drawn into and including PVC rigid conduit not less than 20mm dia, medium grade, ISI marked with and including 1.5 Sqmm unsheathed green colour stranded copper conductor FRLSH cable for continuous earth wire and including sunken pressed steel concealed terminal boxes of suitable size made out of 1.2mm thick sheet covered with 2.6mm thick white hylam sheet cover of suitable size for mounting switches/ sockets/ fan regulators or Modular flush box for mounting modular switches/ sockets/ regulators etc including cutting chasing in wall and making good disturbed surface with existing colour complete all as specified & directed for the following :-
(a) One light/fan point controlled by one switch
(d) One socket outlet 2/3 pin 5 Amp, multipurpose on same board with other switches
(c) One switch/socket outlet point 2/3 pin 5 Amp multipurpose on independent board
All as per Item No 117 above, but with FRLSH cable 2.5 sqmm stranded copper conductor for switch/ socket outlet 5 Pin,15 Amps multipurpose controlled with 2.5 sqmm copper conductor FR cable as continuous earth wire of green colour on independent board.
Supply and fix switch piano flush type, 5 amps, 230V AC,single pole, one way
Supply and fix,switch piano flush type 15 amps, 230V AC single pole one way
Supply and fix,socket out let multipurpose suitable for 2/3 pin 5 Amp flush type
Supply and fix,socket out let 2 IN 1, multipurpose suitable for 3 pin 5/15 Amp flush type.
Supply and fix angle/batton type holder insulated body in white colour
Supply and fix, ceiling rose, 3 phase, polycorbonate isolated body for surface type, three terminals.
S&F LED lamp of 7 W (B-22 Base) 6500K complete all as directed.
S & F for wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, Decorative ultra slim polycarbonate LED lighting fixture with high lumen output, environmental friendly, energy efficient high transmissitivity diffuser, high lumen ouput 230 volts and intregrated electronic driver connector block etc. complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Make : Havells Cat part No LHEXBLP7PN1W022 or its equivalent in Philips, Wipro, Bajaj
S & F for LED 10 watts batten aluminium extruded with decorative end caps complete all as specified and as directed. Make : Havells Cat Part No LHEXACP7IN1W010 or its equivalent model in Wipro, Philips.
Supply & fix Surface/Recessed mounted LED panel 15 w,slim,compact round LED panel of 15 W plastic body with premium diffuser to ensure glare free & even distribution of light complete.
Supply and fix of exhaust fan, steel body AC single phase 230 volt of size 380mm sweep complete with blade, frame and louvers all as specified and directed incl making/ alteration of hole wherever necessary making good disturbed surface, painting to match with existing surfaces.
S & F for sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.
Supply and fix MCB SPN 6 to 32 Amps 10 KA, 'C' series including connection with suitable size aluminium/ copper lugs complete all as specified and directed by Engr-in-Charge.
Supply and fix MCB SP 6 to 32 Amps 10 KA, 'C' series including connection with suitable size aluminium/ copper lugs complete all as specified and directed by Engr-in-Charge.
M&L for Sub main wiring in repairs with two runs of single core FRLSH PVC insulated unsheathed cable 1100 volts grade, 4 Sqmm size with multistranded copper conductor, drawn in and including concealed non metallic rigid PVC conduit of not less than 25mm dia including one run of PVC insulated unsheathed 2.5 sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly in concealed wiring system by cutting of wall and making good disturbed surface of wall all as specified and directed. Note:- Two runs of 4.00 sqmm cable,one run of 2.50 sqmm cable and one run of PVC conduit will be measured as one unit.
S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for Bldg security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 30/35 watts with pre wired and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge. Make : Bajaj Cat Part No ENXT P 24L WH CR PC SD (Edge plus series) or its equivalent in Philips, Wipro.
Sppply & Laying XLPE insulated, armoured, electric cable 16 Sqmm 2 Core with aluminium conductor, 1100 volts grade, laid in trenches, fixed on poles/ walls or passing through pipes including provision of necessary lugs and glands & making necessary connection including taking down old unservicable cable of any core complete all as specified and directed.
Excavating in trenches, in any type of soil not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc and getting out in any type of soil complete all as specified and directed.
Returning, filling in excavated approved soil, including spreading, leveling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed.
Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.
Supply laying and jointing GI pipe 'light grade' 40mm bore in trenches/ under floors or roads/ along poles/ on wall incl clamps for protection of cables incl fittings complete all as specified and directed.
M & L for clean and dry sand (un washed) in trenches incl spreading and levelling for cushioning of UG cable complete all specified and directed.
M & L for brick size sub class ‘B’ (modular size), laid flat in trenches for protection of cable complete all as specified and directed.
M&L of earthing complete with GI steel earth plate electrode 60cm x 60cm x 6.0mm thick barried directly in ground vertically to a depth not less than 2.25 metres below ground level with top edge of earth plate at a depth not less than 1.5 mtrs below level ground, connected to GI strip 32 x 6mm by means of nuts, bolts checks nuts and washers made of GI earth wire protected by GI pipe 40mm bore, medium grade and connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1 using 20mm graded aggregate, pre-cast RCC (1:2:4) type-B, over slab 30cm x 30cm x 10cm with one lifting handle made of 8mm dia MS bar funnel wire mesh, 20mm bore GI or steel pipe medium grade for watering, charcoal or coke and salt in alternate layers, necessary excavation and earth work in any type of soil complete all as shown in electrical plate No 3 of MES schedule Part-I and testing after completion.
Supply laying and jointing GI pipe 'light grade' 32mm bore in trenches/ under floors or roads/ along poles/ on wall incl clamps for protection of cables incl fittings complete all as specified and directed.
Supply laying and jointing GI pipe 'light grade' 25mm bore in trenches/ under floors or roads/ along poles/ on wall incl clamps for protection of cables incl fittings complete all as specified and directed.
Supply laying and jointing Stop valves, 32mm cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed
Supply laying and jointing Stop valves, 25mm cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed
ms shrilaxminarayan and sons
sunway associates
M/S UnitedConstruction
M/s Narendra kumar Agrawal
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .