GE(S) BTD 86 OF 2024-25 SPECIAL REPAIR TO BLDG NO P 287 AI (COOK HOUSE) AT OTM ACCN AND PROVISION OF PERMANENT STRUCTER FOR STAGE FOR TAKSHILA HALL UNDER AGE BR I AND AGE BR II UNDER GE(S) BATHINDA AT BATHINDA MIL STN. Job No.(81SA BTD SR(B)18 24-25

Amount

Taking Down Chowkhats or Frame with Shutttter ( with out taking out shutter from the frame ) not exceeding 1.50 sqm each as doors , windows aaa& ventilators etc and removal from site all as specified and directed

S&F Factory made single extruded WPC ( Wood Polymer Composite ) Solid Door Frame /Chowkhat of Size 45mmx70 mm comprising of virgin polymer of K value 58-60 (susension grade ), Calcium Carbonate and nautral fibers ( Wood Powder /rice husk/wheat husk ) and non toxic additives (max toxcity index of 12 for 100 gms ) fabricated with miter joints after applying PVC Solvant cement and screwed with full body threaded star headed SS screws having minimum density of 750 kg /cum and screw withdrawl strength of 2200 N (face ) & 1100 N (Edge) minimum Compressive strength of 508 N /sqmm modulus of elasticity 900 N/Sqmm and resisitence to spread of flame of class A cat with property of being termite / borer proof , water moistur proof and fire retaident and fixed in position With MS hold Fast /SS Dash Fastner incl S&F (03 Nos Per Frame ) 100 mm long SS Butt Hinges as specified and as directed by engr-in charge

S&F Factory made single extruded WPC ( Wood Polymer Composite ) Solid Plain flush door shutter of 30 mm size comprising of virgin polymer of K value 58-60 (susension grade ), Calcium Carbonate and nautral fibers ( Wood Powder /rice husk/wheat husk ) and non toxic additives (max toxcity index of 12 for 100 gms ) having minimum density of 650 kg /cum and screw withdrawl strength of 1800 N (face ) & 900 N (Edge) minimum Compressive strength of 50 N /sqmm and resisitence to spread of flame of class A cat with property of being termite / borer proof , water moistur proof and fire retaident and fixing and incl S&F of 02 Nos (per Leaf) SS 150mm long Tower Bolt and S&F of 02 Nos (per Leaf) SS 150mm long handle as specified and directed by engr-in charge

Taking down Cement plaster including raking out joints hacking for key scrubbing down with water etc

Rendering 15mm thick in cement mortar 1:6 on other than fare face of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement

Rendering 15mm thick in cement mortar in 1:4 on fare face of brick work or concrete surfaces even and smoothe without using extra cement & with using integral water proofing compound

Taking Down Chowkhats or Frame with Shutttter ( with out taking out shutter from the frame ) exc 1.50 sqm not exceeding 4.0 sqm each as doors , windows aaa& ventilators etc and removal from site all as specified and directed

S&F pressed steel frames of size 125x60 mm for doors with one or more rebates incl necessary fixing lugs , hinges , lock strike plate etc ( thickness of sheet shall be 1.25 mm) and making good the wall with plaster in CM 1:6 complete all as specified

Demolition of unreinforced concrete in ground floors and pavings in n exc 15 cm thickness (below or above ground floor level)

PCC (1:3:6) type C-2 (using 40mm graded agg) 75mm thick as in plinth protection.

M&L for rendering 5 mm thick in cement mortar in (1:3) finishing the surfaces even and smooth on ceiling complete all as specified.

M&L for 15 mm thick screed bed or bedding layer in cement mortar (1:3) on roof surfaces parapet or vertical beam surface (horizental or vertical) finishing the surfaces even and fair complete all as specified. (Note :- Course sand (Toka sand) shall only be used in screed bed/plastering.)

M&L for Removing of Exsiting roof treatment of any type , any thickness and in any number of layer up to RCC roof slab including remoiving of demolished material exc 2.5 km but n exc 5 km as per direction of engr-in-charge and Cleaning ofRoof / wall concrete surfaces & repairing the surface irregularities like cracks, potholes, as per manufacturers method statement. (a) Making V-grooves with cutter, hammer,chisel upto 5- 10mm in between the roof surface and filling will be done with HS latex putty and HS PU sealant. (b) Exposed Roof & Walls Supply and apply PU based waterproofing and heat reflecting system having following key performance properties: (i) UVresistant and resistant to yellowing and weathering (ii) Highly elastic and crack bridging (iii) Non-toxic and VOC complaint water based coating (iv) One component ready to use (v) Excellent adhesion on porous and nonporous substrates (vi) Seamless water proofing membrane Water vapour permeable Material shoud have below properties : Solid content -60% ( ASTM D 1644) dnsity(gm/cc)-1.30 (ASTM D1475) Elognation-350% (ASTM D 2370) Tensile strength N/sqmm-2.8-2.9 (ASTM D 2370) Solar reflective index -100 according to ASTME1980 System: Providing and applying primer over the prepared surface with Homeshield PU rooKoat Firstcoat:Material:Water=1:1 by weight Total thickness: ~~0.4 – 0.5 mm (Consumption: 0.25 kg/m2.) Reinforcement: Glass fiber mesh second coat: Homeshield PUroofKoat (Consumption : 0.5 kg/m2.) Third coat:Homeshield PUroofKoat (Consumption: 0.5 kg/m2.) Note : The installation company of roofing system should be trained and authorized by Manufacturer & installation to be carried out as per manufacturers approved method statement. All auxiliary & accessories involved during applicationshouldbesuppliedbysinglemanufactureras a part of system. Any component used which is not manufactured by the roofing manufacturer can only be used with official approval from manufacturer.

M&L For Making Padding to matain roof Slope and benching with PCC (1:2:4) type B0 using WPC as per manufacturer's instruction along side wall adjoining to roof in concave shape complete all as specified and directed. Note : WPC shall be measured and paid separately.

S&F 2nd class HW 35mm thick facotry made panelled shutters with lock rail and panel of 9 mm bwp commercial ply of 12 mm veneered particle board with commercial veneering on both faces . The size of rail and stylr as per IS-1003 (pt-I) klin seasoned and chemically pressure treated complete all as specified

S & F factory made glazed and skeleton shutters 35mm thick using second class hard wood open rebated and prepared to receive glass, gauge etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc; sizes of members of shutters as specified in SSR Part I, Section 8, Clause 8.24(a); all as specified complete.

S&F 300 mm long stainless steel sliding bolt plate type with bright bolt not less than 12 mm dia with and including a minium of 6 carringe bolts and nuts four on bolt plate and two on stapple plate and fixed conforming to IS 15834-2008 complete all as specified and as directed.

S&F 200 mm long stainless steel barrel tower bolts, ISI market with bright bolt and fixed conforming to IS 15833-2009 complete all as specified and directed.

S&F type-3 stainless steel door handle of size 100mm fixed with counter sunk head screws conforming to IS 208-2020 all as specifierd and as directed.

Factory made Steel Window/Ventilator box type using ERW hollow 'P' section comprising double frame for and including gauged and skelton shutter jointed internally with flat iron 40x4mm complete including grill of 8mm square bar , fixed horizontally @10mmc/c hinges , handle tower bolts stops lugs etc all as specified and directed.

S & F sheet glass, 4 mm thick ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane fixed with oil putty or wooden beads including Provn of glazing pins/spring clips wherever necessary complete.

S & F 4 mm thick figured glass, pin head type and glazing with oil putty in ventilator complete.

M&L Wet grip coloured ceramic tiles 9 to 10 mm thick ( square / rectangulr) of size 300mmx300mm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick bedding layer using type-I adhesive (thick bed fixing) confirming to IS-15477:2004 and pointed in Epoxy grout to match the shade of tile including necessary cutting as per site requirement and as per manufacturers instructions complete all as specified.Make :- Johnson ( Digital HD Tiles) Barstow DK / LT / HL for Toilets ) or equivalant from Kajaria/ Somany by Ao

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish to a distance exceeding 1 km but not exceeding 2 km.

S&F glazed ceramic coloured tiles 600 x 300mm, 9 to 10mm thick in verticle surfaces such as dado / skirting, including 10mm thick bedding layer using type-I adhesive (thick bed fixing) confirming to IS-15477:2004 and pointed in Epoxy grout to match the shade of tile including necessary cutting as per site requirement and as per manufacturers instructions complete all as specified.

S&F in Repair Double Bowl Sink made of 1 mm thick Stainless steel sheet of size 114 mm x 45mmx22 mm fixed complete with easte pipe and Coupling of specifiec size as specified and as directed by Engr-In-Charge.

S&F 15mm bore ISI chromium plated quarter turn Pillar cock screwed down high pressure, with or without lettered Hot ot Cold with long screwed shanks and flynuts screwed for iron pipe complete all as specified.

S & F in repair PVC connection 15 mm size with PTMT nuts of length 450 mm of approved quality

S & F 15 mm bore chromium plated fancy type stop valve of cast copper alloy screwed down high pressure with crutch butter fly handle screwed both ends for iron pipe or for unions and fixed all as specified.

S&F in repair 15 mm dia ISI Mark bore chromium plated long body with wall flanges bib taps cast copper alloy, screwed for iron pipe, or for brass ferrule complete all as specified and as directed.

S&F grating doom 125 mm dia grating with or without wastehole ptmt

S&F 16 mm CPVC pipe sdr11and plain CPVC sdr11 fitting with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm including taking down old pipes of 15mm bore of any description complete all as specified and directed.

S&F 25 mm CPVC pipe sdr11and plain CPVC sdr11 fitting with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm including taking down of old pipes of 20mm bore of any description complete all as specified and directed.

taking down rain water pipe and evas gutters (any size and pattern) incl all fittings heads shoes bends swan necks etc

S & F 110 mm bore of pipe PVC (SWR) type B pipes single socket in any length with rubber ring joint fixed to walls with GI Brackets at a distence of 100-120mm away from walls as directed 6 Kg/Sq cm. Make :- Astral / Prince / Finolex.

S&F 110 mm bore pipe PVC (SWR) bends of any radius / shoe fixed to PVC pipes as directed

S&F in repairs vitreous china squatting pan, 'Orissa' pattern, size 580mm x 440mm, white, with integral foot rests including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. including making good to floor and excluding flushing cistern, flush pipe and waste pipe.

S & F in repairs PVC valveless, syphonic action type, flushing cistern, 10 litres capacity, low level, white, with inlet, ball valve, float and handle including brackets and PVC flushing pipe 32mm dia 900 mm long complete.

S & F in repairs vitreous china wash hand basin, white, of size 550mm x 400mm , excluding waste, chain and plug and porcelain stopper but including 32 mm dia complete all as specified andas directed.

Dismentalling and disconnecting of existing CI soil vent pipe 100 mm bore fixed to wall , laid in trenches incl all fittings and accessories

S&F 110 bore, PVC Swr bends Juction , Tee and Y (any radius), diminishing pieces or tapers (large bore measured) with oval access door as in repairs complete all as specified and directed.

S&F Branch pieces,PVC SWR single 110 mm bore, equal or unqual, as in repairs complete all as specified and directed.

S&F 100mm dia of long neck PVC SWR P trap with grating incluing jointing to waste pipe fixed in cement concrete 1:2:4 type B1 in repair complete all as specified and directed.

Dismentalling water tanks of exc 500 ltrs and n exc 1000 ltrs capacity water storage tanks remove from site complete

S&F 1000 litres capacity Rotational moulded polyethylene in white colour, three layered, water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position

S&F ball valves high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe of size 25 mm bore (minimum weight 210 gram).

S & F Gun metal globe or Gate valve , with iron wheel , screwed both ends for iron pipe or for unions for 25 mm bore dia of pipe.

M&L preparation of untreated steel surface of any description & applying two coats of synthetic enamel paints over red oxideprimer includ preparation of surface.

S&F 0.56 mm thick plain aluminium sheeting alloy 31000 H4 , in Crumple Joints ( length and grith as fixed ) after plastering is all specified and directed by engr-in-charge .

M&L brick work with sub class 'B' old size bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 but except bricks (old serviceable bricks to be used) complete all as specified and directed.

Applying acrylic thick wall care putty on internal and external surfaces of walls /ceilings ( thickness vary from 1.5mm to 2.5 mm thick as required for desired smoothness and levelling of surfaces in two or more layers ) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for reciveing exterior /interior paining complete all as specified and as directed. Note : (i) The prepared surface after wall putty , the contractor will inform to the GE as well as to the Engineer-in-charge for site inspection before applying further finishes. please note that the further finishers work will start only after approval of the prepared surface from the GE as well as to the Engineer-in-Charge through Site order.

Prerparation of surface and applying 02 coats of interior emusion Paint (light Shade) @10 sqm/litre/02coats by using roller /brushto wall surface over &including a coat of interior wall primer @10sqm/litre/1 coat as recommended for undeer coat by manufacture of interior emulsion using nfollowing brands of emusion and primer complete all as specified and as directed.

Complete removal of exsiting treatment of any type/description from walls/RCC surfaces /ceiling/chajjas/roof projections etc with mechanical means /grinder complete all as specified and as directed.

M&L for preparing newly plastered surfaces of walls and applying three coats of Whitewashing on Walls complete all as specified.

M&L for preparing newly plastered or unplastered surface of ceiling and applying three coats of white wash complete all as specified.

Preparation of surfaces and applying 02 coats of exterior emulsion paint (light shade) with highlighter of any approved shade @ 5 sqm/litre/02coats by using roller to to external walls/RCC surfaces /soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior weall primer @11 sqm/litre/1 coat as recommended for under coat by manufactures of exterior emulsion by using following brands of emulsion and primer complete all as spcified and as directed.

M&L for preparation of new steel surfaces of any description over 10cm width or girth and applying two coasts of synthetic enamel paint (for steel surfaces) complete all as specified.

M&L preparing wood or wood based surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Dismantling stone slabs of any description or thickness in floors, apron etc laid bedded and pointed in any mortar complete all as specified and directed.

M&L marble work (Udaipur green slabs) 15 to 16 mm thick (table rubbed and polished) as in cooking platforms and like in cement mortar (1:4) in pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade and roundening to the edge of stone slabs on edges etc. all as specified.

Pre-polished kota stone 18-20mm thick as in flooring, cills and stair case over cement screed base laid and jointed With grey cement slurry mixed with pigment to match the shade of the slab including rounding of edges laid over 15 mm thick screed bed in cm 1:6 complete all as specified and directed. Note : Full piece of kota stone to be used in window cills, tread and riser

Pre-polished kota stone 18-20mm thick in riser of steps, skirting, dado and pillar laid over 10 mm trhick cement mortar screed (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab complete all as specified and directed.

Complete removal of existing surface finishes of ceiling and applying two coat of white wash on old plastered ceiling surfaces etc complete all as specified and directed.

M&L Carefully chipping, removing existing loose/ damaged concrete with plaster from Roof, Ceiling, Chajja, Fascia, Fins, Drops and similar items by low impact high frequency hammer/ chipper without damaging the existing sound concrete and exposing old reinforcement upto 10mm beyond corroded reinforcement bars using electrically operated diamond concrete saw blade, making the edges straight and Cleaning all existing reinforcement bars in Roof, Ceiling, Chajja, Fascia, Fins, Drops and similar items with wire brush/rotary wire brush to make entire circumference surface of bars free from rust scales, loose material, dirt etc., complete and applying alkaline rust converting primer in 2 coats on the existing rebar and allowing it to react with rust for 6 hrs and form a corrosion resistant, insoluble and adherent protective layer including cleaning the reinforcement, wire brushing to remove the rust spalls, (consumption Qty as per manufacturer’s instructions but min 0.4 kg/Sqm approx for 2 Coats ) complete as per manufacturer’s instructions, complete all as specified and as directed by Engineer-in-charge. Note :- Mode of measurement : per sqm of breaking area of concrete only.

Providing and application of Zinc rich epoxy anti-corrosive protective coating for reinforcement bars as corrosion protection system in 2 coats to the entire circumference surface of bars (consumption Qty as per manufacturer's instructions but min 0.4 kg/Sqm approx for 02 coats) in Roof, Ceiling, Chajja, Fascia, Fins, Drops and similar items complete all as specified and directed by Engr-in-charge. The product should confirm carbonation resistance of 2 mm and bond strength > 1N/sqmm according to ASTM C 882-78 complete all as specified and as directed by Engineer-in-charge. Note :- Mode of measurement: per sqm of application area of concrete.

Apply SBR based bonding agent to the entire concrete surface prior to building up of concrete with Polymer modified mortar or any other treatment , (consumption Qty as per manufacturer’s instructions but min 0.4 kg/Sqm approx) including cleaning the surface to remove dirt, dust or any other impurities on the surface, etc. complete in Roof, Ceiling, Chajja, Fascia, Fins, Drops and similar items complete all as specified and as directed by Engineer-in-charge.

Rebuilding the section of structural damaged RCC/PCC elements of Roof, Ceiling, Chajja, Fascia, Fins, Drops repair to spalling concrete to its original size and shape in layers of 10 mm average thickness in 1st layer by providing and applying with pre-batched, one component fiber based repair mortar having compressive strength >= 50 N/sqmm (28 days) according to ASTM C 109; flexural strength >= 5N/ sqmm (7 days) according to ASTM C 293-79 complete all as specified and as directed by Engineer-in-charge.

M & L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and directed by Engineer-in charge.

M&L for PCC (1:3:6) type C-2 ,using 40mm graded stone aggregate as in foundation filling & mass concrete complete all as specified

M&L filling 150mm Hard core, broken to gauge n exc 63mm complete all as spefcified

M & L for 25 mm thick PCC type B-0, 1:2:4 (20mm graded aggregate)complete all as specified.

M&L 100 mm thick cement concrete in foundation type D-2 1:4:8 (40 mm graded aggregate ) and mass concrete complete all as specified.

M&L applying Two coat of Cement Based paint on New plastered surfaces of wall over a coat of primer incl preparation etc complete all as specified.

M&L cement concrete type B1 ,1:2:4 mix (20 mm stone aggregate) as in bedding ,benching,of manhole ,coping etc complete all as specified.

S&F for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing.

S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame / plastered surfaces with necessary nails as per specifications and drawing lining board complete all as specified

M & L 18/19mm thick SUNMICA boards interior grade, solid core, general purposes type, with face veneers of type 'BB', fixed with screws to timber frame work complete all as specified

Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing incl screed bed or bedding layer of mortar 15 mm thick 1:6 for laying floor finishes complete all as specified.

Taking down carefully existing copper/Aluminum point wiring (light,fan, socket or power) complete including fixture and fittings such as switches, bellpushes, ceiling roses, pendents, regulators, sockets, light fitting, callbells etc removiing materials to store for keeping in safe custody or for taking credit(credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc. to match existing complete allas specified and directed

M & L for Point wiring with multi-stranded copper conductor, single core, PVC insulated and unsheathed FRLSH cable, including PVC insulated unsheathed multistranded copper conductor single core FRLSH cable as earth continuity conductor to common earth and connected to earth dolly with GI terminal boxes, modular frame & cover plate (suitable for modular switch/sockets) for the following: -

One light point controlled by one switch or one fan point controlled by one switch & fan regulator etc. with 2.5 Sq. mm (nominal area) cable & 2.5 Sq. mm (nominal area) cable as earth continuity conductor, in and including rigid non metallic PVC (not less than 25mm size) medium duty concealed conduit all as specified.

One Socket outlet three pin, 6 Amp, on the same board, with 2.5 Sq. mm (nominal area) cable & 2.5 Sq. mm (nominal area) cable as earth continuity conductor, all as specified.

One Socket outlet three pin, 6 Amp, independent, with 2.5 Sq. mm (nominal area) cable & 2.5 Sq. mm (nominal area) cable as earth continuity conductor, in and including rigid non metallic PVC (not less than 25mm size) medium duty concealed conduit all as specified.

One socket outlet three pin, 5/15 Amp, independent, with 2.5 Sq. mm (nominal area) cable & 2.5 Sq. mm (nominal area) cable as earth continuity conductor, in and including rigid non metallic PVC (not less than 25mm size) medium duty concealed conduit all as specified.

Note for serial item No 81.00 to 85.00: 1. Switch(es) & socket(s) shall be measured & paid for separately under respective item of Schedule 'A'. 2. GI boxes shall be fixed flush in position with cement mortar (1:4) complete all as directed.

M & L for wiring with 2.5 sqmm size staended FRLSH copper conductor cable single core multi starnded copper in and including PVC conduit medium grade and MS termunal boxes suitable for housing modular switches, sockets and regulators with all fittings and fixing materials including modular inner plate and cover plates of suitable modules and multistarnded FRLSH copper earth continuty conductor of size 2.5 sqmm and connecting to comman earth dolly complete all as specified and driceted for the following: -

One light/fan/bell push controlled by one way switch

One socket outlet point 6A on same board

S&F Switch modular type single pole, one way, 6 Amp, one module, complete all as specified.

S&F Switch modular type single pole one way, 16 Amp, one module, complete all as specified.

S&F Socket outlet modular type, multipurpose, 2/3 pin, single pole one way, 6 Amp, two module, complete all as specified.

S&F Socket outlet modular type multipurpose 2/3 pin single pole one way 6/16 Amp, two module, complete all as specified.

S&F Fan regulator, modular type, 5 step, high speed, two module complete all as specified.

S&F Ceiling rose, 3 terminal PVC/polycarbonate, suitable for 230 V, AC, 50 Hz supply.

S&F in replacement sub main two single core PVC copper conductor unsheathed wire multi stranded 6.0 sqmm along with earth wire 6.0 sqmm copper conductor single core wire connected by common earth in and including medium grade 20mm size concealed conduit complete all as specified.(Note :- two lengths of 6.0 sqmm cable and one length of 6.0 sqmm earth cable alongwith PVC concealed conduit will be measured as one running length)

Dismantling and taking down carefully MCB distribution boxes including MCBs /Isolator of any type and model complete all as specified and directed.

S&F in replacement sheet metal encloser double door 4 way SPN 240V ISI marked complete with neutral and earth link and bus bar complete made out of CRCA steel sheet Factory made including blanking plate for unused module complete all as specified and directed

S&F in replacement sheet metal encloser double door 12 way SPN 240V ISI marked complete with neutral and earth link and bus bar complete made out of CRCA steel sheet Factory made including blanking plate for unused module complete all as specified and directed

-do- all as per item No 99 above but 04 way TPN 415 V complete all as specified and directed.

S&F in replacement MCB 6-32 Amp 240V SP 10 KA ‘C’ series complete all as specified

S&F in replacement MCB 20-32 Amp 240V SPN 10 KA ‘C’ series complete all as specified

S&F in replacement RCBO for EARTH LEAKAGE, OVERLOAD & SHORT- CIRCUIT PROTECTION 415 V 63A AC type 10kA Four pole 30mA ISI marked complete all as specified

S&F wall mounted extruded Aluminium/polycarbonate integrated LED batten fixture with tube 1.2 m, 25watt, 1.2 m 3000/6500K,efficacy not less than 90 lumen/watt, extruded Aluminium/polycarbonate, PC diffusor and integrated inbuilt driver complete complete including making connection complete all as specified and directed.

S&F Lamp holder PVC/polycarbonate type with back plate complete all as specified

S&F LED 5W Lamp base B-22 complete all as specified

S&F LED street light fitting 35 Watt 230V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrossion resistant complete with IP 65/66 protection including fixing with GI/MS bracket made out of suitable size of light grade tube upto 1.2 mtr length bent to shape with 02 sets of MS clamps made out of minimum 3 mm MS flat iron with suitable bolt and nuts complete with making connection complete all as specified and directed

S&F LED panel light fitting, recessed mounted, square shaped of size 2'x2' area, 36(±10%)watts efficacy not less than 90 lumen/watt, extruded Aluminium/polycarbonate, PC diffusor, module and inbuilt driver complete including making connection complete all as specified and directed.

M & L for sub main wiring (with approved colour coding as per IS) 2 x 4 sqmm with single core FRLSH PVC insulated flexible stranded copper conductor 1.1 KV grade (1 x 4 number of runs as indicated below with single core FRLSH PVC insulated flexible stranded copper conductor 1.1 KV grade for earthing including conceleaed (cuttung/chases of wall include) suitable size PVC cinduits medium grade and accessories complete all as specified and directed.

S & F flood light fitting sqaure shape 100 watt 230V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with drive, lamp, with impact and corrossion resistant complete with IP 65/66 protection size fixing at any height upto 15m complete with making connection complete all as specified and directed.

S&F LED track mounted LED 30 Watt 230V AC with modren design, compact size with high power COB LED to provie focussed light, Track light is method of lighting where light fixtures are attached anywhere on a continuous track rail which is lectrically charged as compared to the need of routing electrical wiring to induvidual light postion light with high pressure die cast aluminium hosing and heat resistant complete with drive, lamp, with impact and corrossion resistant complete with IP 65/66 protection size fixing at any height upto 15m complete with making connection complete all as specified and directed

S & F LED flexi strip with optimum brightness & uniformity of light for perpect cove lighting with CVD drivers for 5 lenth of strip & suitable colur as per site requirement which is electrically charged as compared to the need of routing electrical wiring to induvidual light postion with driver, lamp, with impact and corrossion resistant complete with IP 65/66 protection size fixing at any height upto 15m complete with making connection complete all as specified and directed

Taking down unserviceable ceiling fans complete dismantled with their blades and removing materials keeping in safe custody and to be deposited at E&M store complete all as specified and directed.

S & F of ceiling fan 5 star rated ISI marked 1200mm sweep, 230 volt, 50Hz AC supply with brushles direct current motor (BLBC) 6.00 BEE alongwith down rod, canopy complete and connecting up including provision of three core flexible PVC cable with stranded copper conductor of size 0.75 Sq.mm from ceiling rose to connector of ceiling fan complete all as specified and directed.

Dismantling of unserviceable earthing complete all as specified.

M & L for earthing with galvanized steel plate electrode 600 x 600 mm x 6 mm size directly burried in ground vertically to earth pit not less than 2.25 meter deep below normal ground level with top edge of the earth plate not less than 1.5 m below normal ground level surrounded with coal dust and common salt filling in alternative layers of 15 cm thick each connected to and including GI earth wire 4 mm dia by means of nuts, bolts, check nuts & washers etc connecting to earthing test point, main switch board and including 15 mm dia GI pipe light grade for protection of earth lead from earth plate to distribution board and 20 mm dia GI pipe medium grade connected with funnel having wire mess for watering purpose including necessary excavation and earth work, PCC (1:2:4) type B-1 (using stone aggregates) for earthing pit, 10mm thick cast iron cover with angle iron frame all as specified and shown in electrical plate No 3 of SSR Part-I and testing on completion incl taking down of unsv complete all as specified

M/s Balvinder Singh Engineer and Contractors (BID ID -3189189)

rkkataria and sons (BID ID -3189139)

M/s Kamal Builders (BID ID -3189217)