Balance work of Electrical over head line for pump house and Street Light Work for Rajkiya Pashudhan Evam Krishi Prakshetra at Bharari, Jhansi

Amount

Electrical over head line for pump house and Street Light Work Labour With Material

S/F of steel Tubular pole 9.5 mtr Long designated 410 SP - 37 in 1:3:6 cement concrete foundation including excavation back filling etc complete in all respect.

S/E of D clamps of 38 mm x 6 mm flat iron on steel tubular poles with bolts, nutrs etc. complete in all respect including painting with aluminium paint.

S/E of D clamps of 50 mm x 6 mm flat iron on steel tubular poles with bolts, nutrs etc. complete in all respect including painting with aluminium paint.

Painting of electric pole with 2 coats of aluminium paint over red oxide primer complete in all respect.

S/E of overhead line with ACSR conductor on poles / service bracket including binding etc. complete In all respect.

S/F of 100 mmx 110 mm shackle insulator including G.I. bolts / spindle nuts etc. complete in all respect.

S/F of 230 mm x 32 mm x 1.5 mm galvanised steel strip including holes for shakele insulator pins and bolts etc. complete in all respect.

Supply & erection of stay set at 3.5 Metres away from the pole complete with galvanised 19 mm dia x1.80 Metre long stay rod, 30 cm x 30 x 6.3 mm anchor plate, thimble stay clamps, stay insulator,19 mm 600 mm double screw tightener, 7/3.5 mm G.I. stay wire etc. in 1:3:6 cement concrete complete in all respect.

S&L of 25mm x 3mm G.I. Strip from earth electrode directly in the ground as requird complete in all respect.

Supply & burying of Earthing Electrode T-19 (Hot Dip Galvanized), Length up to 2000mm, Outer pipe 50mm, inner pipe 25, Terminal dia 12mm, Outer GI pipe of 16 SWG and inner GI pipe of 12 SWG with Hot Dip galvanization up to 100 micron filled with crystllingnce conductive mixture (CCM) having anti corrosive & conductive property with 50 Kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30 cm squre C.I. frame with hinged cove & masonty housing. (From electrode terminal to switch board, cost of 25x3 G.I. strip will be extra) Make: As approved in U.P.P.W.D., & C.P.R.I. Certified.

s/f of LED Street light Fitting having dia cast aluminium body diffuser with driver set suitable for 75 watt to 90 watt confirming to IP 66 and above protection complete in all respect. Cat - AA

S/F of 63 Amp. 415 V metal clad TPN rewirable type switch fuse unit on angle iron bracket complete in all respect.

S/Laying of 'Al' conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size of as directed by the Engineer - Incharge, complete in all respect. The armouring of the cable ahsll be properly connected with the earth conductor by clamps etc. 35 sq.mm 4 core.

S/E of overhead line with G.I. wire no. 8 to 4 SWG including binding etc. complete. In all respect.

S/E of hexagonal / cradle gaused of G.I. wire no. 8 to 4 SWG on poles / service bracket including binding etc. complete. In all respect.

S/F of G.I. street light bracket on street Light pole

S/F of 500 Amp. kit kat on suitable size of wooden plank fixed on wall with nut & bolt etc. complete in all respect.

S/f of cable, wire , lugs & cable gland etc. misc. item.

M/S UMESH KUMAR THEKEDAR