Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.5 LAccepted-AOC NEAR PANKHA ASHOK YADAV HOUSE BMT CHOWK RAYATWARI COLLIERY CHANDRAPUR CHANDRAPUR 442402 | CHANDRAPUR | CHANDRAPUR | MAHARASHTRA | 442402 | L1 | Accepted-AOC Lowest Bidder L1 for the award of work | |
| 2 | L2₹15.8 L+₹95,375 (6.44%)Rejected-Finance GROUND FLOOR C O RAMCHANDRA KRUSHNAJI HANWATE GHODPETH TAH BHADRAWATI DISTRICT CHANDRAPUR MAHARASHTRA PIN 442406 | BHADRAWATI | CHANDRAPUR | MAHARASHTRA | 442406 | L2 | Rejected-Finance L1 qualifies | |
| 3 | L3₹19.2 L+₹4.4 L (29.4%)Rejected-Finance NEAR RADHAKRISHNA MANDIR SHASTRINAGAR GHUGUS DIST CHANDRAPUR | CHANDRAPUR | CHANDRAPUR | MAHARASHTRA | L3 | Rejected-Finance L1 qualifies |
Tender Value
₹26.1 L
EMD Value
₹32,700
Closing Date
25 Apr 2024, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Staff Officer (Civil),CWS Tadali
Staff Officer (Civil),CWS Tadali
Annual Repair and day to day maintenance related repair works at residential colony and welfare buildings at CWS Tadali
2024_WCL_306608_1
cwtd-civ-e-03-2024-25 dated 15.04.2024
Open Tender
Civil Works - Others
Item Rate
365 days
CWS, Tadali
Please refer Tender documents.
5 documents required · 5 mandatory
₹32,700
15 May 2024
15 Apr 2024
26 Apr 2024
15 Apr 2024
25 Apr 2024
15 Apr 2024
15 Apr 2024 - 21 Apr 2024
Amount
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed.All kind of soil
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4(1Cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
Brick work with Ash bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand)
Brick work with Ash bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand)
Half brick masonry with Ash bricks of class designation 7.5 in superstructure above plinth level up to floor V level.Cement mortar 1:4 (1 cement :4 coarse sand)
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete 40 mm thick with 20 mm nominal size stone aggregate
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete
Providing and fixing 1st quality Ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer) of approved make,in all colours, shades except burgundy , bottle green, black of of any size as approved by engineer- in charge, in skirting , risers of steps and dados , over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand ) and jointing with grey cement slury @ 3.3 kg per Sqm including pointing in white cement mixed with pigment of matching shade complete.
20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand)
Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 metres lead :With cement mortar 1:4 (1cement: 4 coarse sand)
12 mm cement plaster finished with a floating coat of neat cement of mix 1:4 (1 cement: 4 fine sand)
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge In cement mortar
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm
Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-in-charge:Up to 150 mm diameter
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
Providing and Fixing White vitreous china water closet squatting pan (Indian type).Orissa pattern WC pan of size 580 x 440 mm
Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.10 litre capacity - White
Providing and fixing solid plastic seat with lid for pedestal type W.C.pan complete White solid plastic seat with lid
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 75 mm diameter
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 110 mm diameter
Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan.
Deployment of skilled carpenter as and when required basis to attend day to day complaints of CWS colony, workshop, Administrative building,Central Store as per instruction of Engineer in charge.(cost of material is to be paid extra).To execute the work record has to be maintained by the contractor and he has to depute the manpower and supervise the work as per satisfaction of the department and concerned employee (cost of material is to be paid extra) (cost of material is to be paid by the department)
Providing screws etc complete 50 mm
Providing screws etc complete 25 mm
Providing nails etc complete
Providing glass 4.00 mm etc complete
Providing glass putty etc complete
Deployment of skilled Mason as and when required basis to attend day to day complaints of CWS colony,workshop, Administrative building,Central Store as per instruction of Engineer in charge.(cost of material is to be paid extra).To execute the work record has to be maintained by the contractor and he has to depute the manpower and supervise the work as per satisfaction of the department and concerned employee (cost of material is to be paid extra) (cost of material is to be paid by the department)
Supplying sand at site as per in of engineer in charge
Supplying ash Bricks at site as per in of engineer in charge
Supplying Portland cement at site as per in of engineer in charge
Supplying stone aggregate 10mm at site as per in of engineer in charge
Deployment of Unskilled Helpern to assist carpenter and mason as and when required basis to attend day to day complaints of CWS colony, workshop, Administrative building,Central Store as per instruction of Engineer in charge.(cost of material is to be paid extra).To execute the work record has to be maintained by the contractor and he has to depute the manpower and supervise the work as per satisfaction of the department and concerned employee (cost of material is to be paid extra) (cost of material is to be paid by the department)
White washing with lime to give an even shade :Old work (one or more coats)
Distempering with 1st quality acrylic distemper (ready made) having VOC content less than 50 gm per ltr. of approved manufacturer and of required shade and colour complete. as per manufacturer's specification.One or more coats on old work
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
Finishing walls with Acrylic Smooth exterior paint of required shade :Old work (One or more coat applied @ 0.90 ltr/10 sqm).
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work
Providing and applying white cement based putty of avrage thickness 1mm of approved brand and manufacturer over the plastered wall surface to prepare the surface even and smooth complete
Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : Of area 3 sq.metres and below
Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture . M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing.30 mm thick plain PVC door shutters
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 150x10 mm
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm
Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters :35mm thick (for cupboard) including Stainless steel butt hinges with necessary screws.
Providing and fixing oxidised M.S sliding door bolts with nuts and screws etc. complete 250 x 16 mm .
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete :250x10 mm
Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete with100 mm
Total impact of GST for the purpose of CTC
ASHUTOSH B.PARIDA
S. K. PANDEY
techsummary_317717.pdf
PDF • 0.42 MB
finsummary_317717.pdf
PDF • 0.24 MB
LOA032425.pdf
PDF • 0.75 MB
finance_317717.pdf
PDF • 0.42 MB
BOQ Comparative Chart
xlsx • 0.01 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .