WC4538 Construction of Transit Camp cum Field Hostel at Bidar Station

ATTACHMENTS General guidelines for filling up the Attachments

“Construction of Transit Camp cum Field Hostel at Bidar Station under Transmission System Solar Energy Zone in Bidar (2500MW) through TBCB”

THIS BID IS RESERVED FOR WOMEN BIDDERS ONLY

[Spec. No.: SR-I/C&M/WC-4538/2026/ Rfx no.: 5002005032 (SR1/T/W-CIVIL/DOM/B00/26/00536) ]

1 Fill up only green shaded cells in the relevent attachments.

2 Attachments 3, 4, 5, 6, 7, 8, 9, 11, 12,13, 14, 15 and Bid Form for 1st Envelope are included here.

3 Attachment 1 Bid Security : To be submitted as per proforma provided in the Bidding Document.

4 Attachment 2 Power of Attorney : No specific format is provided by POWERGRID. Bidder may use their own format.

8 Attachment 20: Unequivocal consent of the proposed Associate(s) for the purpose of executing the 'Second Contract' and /or 'Third Contract' as an independent Contractor (applicable to foreign bidder) : No specific format is provided by POWERGRID. Bidder may use their own format.

9 Attachment 21: Capacity, Capability and Experience of Proposed Associate(s) (applicable for foreign bidder) : No specific format is provided by POWERGRID. Bidder may use their own format.

पावर ग्रिड कारपोरेशन ऑफ इण्डिया लिमिटेड

(भारत सरकार का उद्यम)

Power Grid Corporation of India Limited

(A Government of India Enterprises)

“Construction of Transit Camp cum Field Hostel at Bidar Station under Transmission System Solar Energy Zone in Bidar (2500MW) through TBCB”

[Spec. No.: SR-I/C&M/WC-4538/2026/ Rfx no.: 5002005032 (SR1/T/W-CIVIL/DOM/B00/26/00536) ]

THIS BID IS RESERVED FOR WOMEN BIDDERS ONLY Please Select one

Enter the details of the bidder below: Women Bidder

Specify type of Bidder Please Select one

Name of the Bidder

Address of Registered Office

Contact Details:

[Spec. No.: SR-I/C&M/WC-4538/2026/ Rfx no.: 5002005032 (SR1/T/W-CIVIL/DOM/B00/26/00536) ] ATTACHMENT-3 (QR)

“Construction of Transit Camp cum Field Hostel at Bidar Station under Transmission System Solar Energy Zone in Bidar (2500MW) through TBCB”

(Qualifying Requirement Data)

Bidder’s Name and Address (Bidder) : To

Name: 0 Sr.GM(C&M)

Address: 0 Contracts & Materials Department

0 Power Grid Corporation of India Ltd.,

0 Kavadiguda Main Road,

Secunderabad - 500 080

In support of the Qualification Requirements (QR) for bidders, stipulated in Section-III of the Bidding Documents, we furnish herewith our QR data/details/documents etc. along with other information, as follows (The QR stipulations have been reproduced in italics for ready reference, however, in case of any discrepancy the QR as given in Section-III shall prevail).

We are furnishing the following details/document in support of Qualifying requirement for the subject package.

A Attached copies of original documents defining :

a) The constitution or legal status; #REF!

b) The principal place of business; #REF!

c) The place of incorporation (for bidders who are corporations); or the place of registration and the nationality of the Owners (for applicants who are partnerships or individually-owned firms).

B Attached original & copies of the following documents :

a) Written power of attorney of the signatory of the Bid to commit the bidder.

1.0 GENERAL INFORMATION

Bidder is required to provide general information as per the following format.

S No. Particulars For Individual Firm

1 Name of the Firm

2 Head Office/ Registered Office Address

5 Contact Person

6 Place of Incorporation/ Registration

7 Year of Incorporation/ Registration

8 Nationality of the Agency

[Necessary documents to eatablish legal status of the bidder should be uploaded with the bid]

2.0 TECHNICAL REQUIREMENTS {Reference Section-III}

2.1A THIS BID IS RESERVED FOR WOMEN BIDDERS ONLY

2.1B Bidder who wishes to participate in the tender should have successfully completed Civil works for any State/Central Govt. departments/ undertakings/ private organizations during last Five years as on the originally scheduled date of bid opening: One similar work of value not less than Rs. 167.99 Lakhs excl. GST or Two similar works, each of value not less than Rs. 104.99 Lakhs excl. GST or Three similar works, each of value not less than Rs. 83.99 Lakhs excl. GST

(a) Following documents shall be submitted by the bidder as evidence of above: (i) Completion certificate(s) from the client for the work inter alia indicating final executed amount and date of completion or any other document, authenticated by the client, containing relevant information to conclusively establish that the bidder has completed the requisite work(s) as per the requirement specified above. (ii) The copy of corresponding work order(s) shall also be submitted. Note: Contracts involving only excavation/earth work or only painting works will not be considered for technical experience.

2.2 Format for the Bidder for indicating its technical experience (in support of meeting the requirement of para 2.1 above is to be furnished, as applicable, using this format]

Name of the Bidder

1 Name of Contract:

2 Contract Reference No. & Date of Award

3 Name and Address of the Employer/Utility by whom the Contract was awarded

4 Scope of work executed under the above contract

5 Date of Completion of works under the Contract

6 Total Value of work executed (Rs.)

7 Details of documents furnished in the Bid, in support of the aforesaid data/details/informations

Name of the Bidder

1 Name of Contract:

2 Contract Reference No. & Date of Award

3 Name and Address of the Employer/Utility by whom the Contract was awarded

4 Scope of work executed under the above contract

5 Date of Completion of works under the Contract

6 Total Value of work executed (Rs.)

7 Details of documents furnished in the Bid, in support of the aforesaid data/details/informations

Name of the Bidder

1 Name of Contract:

2 Contract Reference No. & Date of Award

3 Name and Address of the Employer/Utility by whom the Contract was awarded

4 Scope of work executed under the above contract

5 Date of Completion of works under the Contract

6 Total Value of work executed (Rs.)

7 Details of documents furnished in the Bid, in support of the aforesaid data/details/informations

3.0 FINANCIAL REQUIREMENTS {Reference Section-III}

a) (i) The Minimum Annual Average Turnover* (MAAT) of the bidder for the best three (3) financial years out of the preceding five (5) financial years shall be: Rs. 314.98 Lacs * Note- “Annual gross revenue from operation/gross operating income as incorporated in the profit &loss account excluding other income”.

Note: In case the bidder is a holding company, the Financial Position criteria referred to in clause 3.0 above shall be that of holding company only (i.e. excluding its subsidiary / group companies). In case bidder is a subsidiary of a holding company, the Financial Position criteria referred to in clause 3.0 above shall be that of subsidiary company only (i.e. excluding its holding company).

RELAXATION FOR MSME BIDDERS MSMEs $ / START Ups^: All MSE bidders are exempted from meeting MAAT requirement. Further, START UPs meeting the specified requirements at (I) Technical Experience above shall also be considered qualified if they meet 80% (Eighty percent) of the requirements as specified at para (II) above in financial position. • ^ Start-Ups as defined by DPIIT, applicable as on the originally scheduled date of bid opening. • $ MSE as defined in the bidding documents. Bidder shall furnish documentary evidence in support of the qualifying requirements stipulated above. (a) Following documents shall be submitted by the bidder as evidence of above: i) Audited balance sheet and Profit & Loss Account for the preceding five (5) financial years. In case, the audited balance sheet for latest financial year is not available, a certificate from the Chartered Accountant on their letter head certifying the financial turnover for the latest financial year may be submitted. ii) In case, the bidder is not covered under compulsory tax audit under the IT act for a particular financial year, a copy of acknowledgement of income tax return filed for the corresponding period should also be submitted along with either certificate from Chartered Accountant certifying the turn over or print out of Form 26AS.

3.2 Format for the Bidder for indicating its Financial Criteria (in support of meeting the requirement of para 3.1 above is to be furnished, as applicable, using this format]

Financial Year Turnover

Details of documents furnished in the Bid, in support of the aforesaid data/details/informations

(Use separate sheet for each experience/ Contract)

Date : 00-Jan-00 Printed Name : 0

Place : 00-Jan-00 Designation : 0

[Spec. No.: SR-I/C&M/WC-4538/2026/ Rfx no.: 5002005032 (SR1/T/W-CIVIL/DOM/B00/26/00536) ] ATTACHMENT-4

“Construction of Transit Camp cum Field Hostel at Bidar Station under Transmission System Solar Energy Zone in Bidar (2500MW) through TBCB”

(Alternative, Deviations and Exceptions to the Provisions)

Bidder’s Name and Address (Bidder) : To

Name : 0 Sr.GM(C&M)

Address : 0 Contracts & Materials Department

0 Power Grid Corporation of India Ltd.,

0 Kavadiguda Main Road,

The bidder shall itemize any deviation from the Specifications included in his bid. Each item shall be listed (separate sheets may be used and enclosed with this Attachment) with the following information:

Sl. No. Reference clause in the Specifications Deviation Reason for change The change in Bid Prices if the deviation is withdrawn and the Bidder conforms to the Specifications

Any proposed deviation will be applicable only for the bidder whose bid is substantially responsive in accordance with Clause 22, Section ITB, Vol. I of the bidding documents. If a bid is not substantially responsive, it will be rejected and may not subsequently be made responsive by the bidder by correction of the non-conformity.

The above deviations and variations are exhaustive. We confirm that we shall withdraw the deviations proposed by us at the cost of withdrawal indicated in this attachment, failing which our bid may be rejected and Bid Security forfeited.

Date : 00-Jan-00 Printed Name : 0

Place : 0 Designation : 0

[Spec. No.: SR-I/C&M/WC-4538/2026/ Rfx no.: 5002005032 (SR1/T/W-CIVIL/DOM/B00/26/00536) ] ATTACHMENT-5

“Construction of Transit Camp cum Field Hostel at Bidar Station under Transmission System Solar Energy Zone in Bidar (2500MW) through TBCB”

(Work Completion Schedule)

Bidder’s Name and Address (Bidder) : To

Name : 0 Sr.GM(C&M)

Address : 0 Contracts & Materials Department

0 Power Grid Corporation of India Ltd.,

0 Kavadiguda Main Road,

Secunderabad - 500 080

We hereby declare that the following Work Completion Schedule shall be followed by us in furnishing and installation of the subject package i.e., “Construction of Transit Camp cum Field Hostel at Bidar Station under Transmission System Solar Energy Zone in Bidar (2500MW) through TBCB” for the period commencing from the effective date of Contract to us :

Sl. No. Description of Work Period in months from the effective date of Contract

Date : 00-Jan-00 Printed Name : 0

Place : 0 Designation : 0

Note: Bidders to enclose a detailed network covering all the activities to be undertaken for completion of the project indicating key dates for various milestones for each phase constituent-wise

[Spec. No.: SR-I/C&M/WC-4538/2026/ Rfx no.: 5002005032 (SR1/T/W-CIVIL/DOM/B00/26/00536) ] ATTACHMENT-6

“Construction of Transit Camp cum Field Hostel at Bidar Station under Transmission System Solar Energy Zone in Bidar (2500MW) through TBCB”

(Information regarding Ex-employees of POWERGRID in our Organisation)

Bidder’s Name and Address (Bidder) : To

Name : 0 Sr.GM(C&M)

Address : 0 Contracts & Materials Department

0 Power Grid Corporation of India Ltd.,

0 Kavadiguda Main Road,

Secunderabad - 500 080

We hereby furnish the details of ex-employees of POWERGRID who had retired/ resigned at the level of General Manager and above from POWERGRID and subsequently have been employed by us:

Sl. No. Name of the person with designation in POWERGRID Date of Retirement/ resignation from POWERGRID Date of joining and designation in our organisation

Date : 00-Jan-00 Printed Name : 0

Place : 0 Designation : 0

Note: The information in similar format should be furnished for each partner of joint venture in case of joint venture bid.

[Spec. No.: SR-I/C&M/WC-4538/2026/ Rfx no.: 5002005032 (SR1/T/W-CIVIL/DOM/B00/26/00536) ] ATTACHMENT-7

“Construction of Transit Camp cum Field Hostel at Bidar Station under Transmission System Solar Energy Zone in Bidar (2500MW) through TBCB”

(Declaration regarding Social Accountability)

Bidder’s Name and Address (Bidder) : To

Name : 0 Sr.GM(C&M)

Address : 0 Contracts & Materials Department

0 Power Grid Corporation of India Ltd.,

0 Kavadiguda Main Road,

We conform that we stand committed to comply to all requirements of Social Accountability Standards i.e., SA8000 (latest Standard available at www.sa-intl.org) and maintain the necessary records.

Date : 00-Jan-00 Printed Name : 0

Place : 00-Jan-00 Designation : 0

[Spec. No.: SR-I/C&M/WC-4538/2026/ Rfx no.: 5002005032 (SR1/T/W-CIVIL/DOM/B00/26/00536) ] Attachment-8

“Construction of Transit Camp cum Field Hostel at Bidar Station under Transmission System Solar Energy Zone in Bidar (2500MW) through TBCB”

Information for E – payment, PF details and declaration for Micro/Small and Medium Enterprise)

Bidder’s Name and Address (Bidder) : To:

Contract & Material

Name : 0 Power Grid Corporation of India Ltd.,

Address : 0 Southern Region -I Headquarters

0 Kavadiguda Main Road

0 Secunderabad - 500080 (Telangana)

I. We have read the provision in the Bidding Documents regarding furnishing the option for advance payment.

Accordingly, as per ITB Clause 9.3 as provided in Section BDS, Section III, Vol.-I of the Bidding Documents,

we hereby confirm to opt the following:

Interest Bearing Initial Advance: Supply Portion

(Select from drop down list)

We are furnishing the following details of Statutory Registration Numbers and details of Bank for electronic payment.

1. Name of the Supplier/ Contractor in whose favour payment is to be made Details

2. Address with PIN Code and State

Registered Office:

Correspondence Address:

3. Status – Company/others

[Declaration of Micro/ Small/ Medium Enterprise under Micro/ Small & Medium Enterprises Development Act 2006, if applicable]

4. Permanent Account (PAN) No.

5. GSTIN in the States/UT where the supply for services take place (states where sites under the subject package is situated)

6 Name of the States/UT GSTIN number

a Andhra Pradesh

9. PF Registration No. of the Company

10. PF Regional Office covered (with Address)

11. Name of Contact Person

12. Telephone No(s)

13. Bank Details for Electronic Payment

Name of the Bank:

Address of Branch:

Type of Account: Current Account

14. 9 digit MICR code printed at bottom in middle, next to cheque no.

15. IFSC (for RTGS)/NEFT Code (to be obtained from the Bank) Sample Cancelled Cheque to be enclosed

We hereby declare that the above information are true and correct and we agree that the payment on account of this Contract, in the event of award, be made in the above account maintained in the above mentioned Bank.

Date : 00-Jan-00 Printed Name : 0

Place : 00-Jan-00 Designation : 0

[Spec. No.: SR-I/C&M/WC-4538/2026/ Rfx no.: 5002005032 (SR1/T/W-CIVIL/DOM/B00/26/00536) ] ATTACHMENT-9

“Construction of Transit Camp cum Field Hostel at Bidar Station under Transmission System Solar Energy Zone in Bidar (2500MW) through TBCB”

(Additional Information)

Bidder’s Name and Address (Bidder) : To

Name : 0 Contract & Material

Address : 0 Power Grid Corporation of India Ltd.,

0 Southern Region -I Headquarters

0 Kavadiguda Main Road

Secunderabad - 500080 (Telangana)

In support of the additional information required as per ITB Sub-Clause 9.3 (i) of the Bidding Documents, we furnish herewith our data/details/documents etc., alongwith other information, as follows (the stipulations have been reproduced in italics for ready reference):

1.0 The Bidder shall furnish

Certificate from their Banker(s) (as per prescribed formats in Form 16, Section-VI: Sample Forms and Procedures) indicating various fund based/non fund based limits sanctioned to the Bidder and the extent of utilization as on date. Such certificate should have been issued not earlier than three months prior to the date of bid opening. Wherever necessary the Employer may make queries with the Bidders’ Bankers. [Reference ITB clause 9.3(p)(i)]

1.1 In accordance with 1.0, certificate(s) from banker as per requisite format, indicating various fund based/non fund based limits sanctioned to the bidder or each member of the joint venture and the extent of utilization as on date is/are enclosed, as per the following details:

Name of the Banker by whom certificate issued

Date of certificate (should not be earlier than 3 months prior to date of bid opening)

Whether fund based/non fund based limits are indicated in the certificate

Whether extent of utilization is indicated in the certificate

1.2 The Bidder should accordingly also provide the following information/documents

(i) Details of Banker:

Address of Banker

Contact Name and Title

(ii) As per para 1.0, Authorization Letter(s) from the bidder addressed to the Banker(s), authorizing POWERGRID to seek queries about the bidder with the Banker(s) and advising the Banker(s) to reply the same promptly, is/are enclosed as per following details:

Sl. No. Letter Ref. Date Addressed to (name of the Bank)

1.0 Litigation History

The bidder should provide detailed information on any litigation or arbitration arising out of contracts completed or under execution by it over the last five years. A consistent history of awards involving litigation against the Bidder may result in rejection of Bid.

1.1 Details of litigation history resulting from Contracts completed or under execution by the bidder over the last five years. A consistent history of awards invlolving litigation against the Bidder may result in rejection of Bid.

Year Name of client, cause of litigation/arbitration and matter in dispute Details of Contract and date Award for or against the bidder Disputed amount

3.0 Description of the plant for carrying out the work

Bidders should provide information of the plant(s) for carrying out the work including the proposal of manufacturing methods in sufficient detail to demonstrate the adequacy of the bidder’s proposals to meet the technical specification.

3.0 OTHER INFORMATION

3.1 Current Contract Commitments of works in progress

Bidders should provide information on their current commitments on all contracts that have been awarded, or for which a letter of intent or acceptance has been received, or for contracts approaching completion, but for which an unqualified, full completion certificate has yet to be issued.

Details of Contract Value of outstanding work (Rs.) Estimated completion date

3.2 Financial Data:

Figures Rs in Million

Details Actual (Previous five years) Projection for next five years

Total Liability

Current Liability

Profit before taxes

Profit after taxes

Date : 00-Jan-00 Printed Name : 0

Place : 00-Jan-00 Designation : 0

[Spec. No.: SR-I/C&M/WC-4538/2026/ Rfx no.: 5002005032 (SR1/T/W-CIVIL/DOM/B00/26/00536) ] ATTACHMENT-10

“Construction of Transit Camp cum Field Hostel at Bidar Station under Transmission System Solar Energy Zone in Bidar (2500MW) through TBCB”

Bidder’s Name and Address (Bidder) : To

Name : 0 Sr.GM(C&M)

Address : 0 Contracts & Materials Department

0 Power Grid Corporation of India Ltd.,

0 Kavadiguda Main Road,

Secunderabad - 500 080

Integrity Pact - separately attached herewith in Volume-III.

Date : 00-Jan-00 Printed Name : 0

Place : 00-Jan-00 Designation : 0

Instruction for printing & submitting Integrity Pact

1. The requisite format of Integrity Pact is getting generated automatically and displayed here below.

2. Take print out of first page on a non-judicial stamp paper of Rs. 100/- and other seven pages on plain A4 size paper. Such two sets shall be prepared by the bidder.

3. All the pages of both the copies of the Integrity Pact shall be signed by the authorised representative of the bidder and duly stamped.

4. Both the original copies shall be submitted by the bidder in the form of Hard Copy as part of the first envelope before due date & time of submission of the bid.

5. For further details bidders may please refer ITB Clause 9.3 (n).

Between #REF! #REF!

Power Grid Corporation of India Limited #REF! #REF!

having its Registered Office at B-9, Qutab Institutional Area, Katwaria Sarai, New Delhi – 110016 hereinafter referred to as #REF! #REF!

"POWERGRID", #REF! #REF!

#REF! #REF! having its Registered Office at ,

hereinafter referred to as

"The Bidder/Contractor"

POWERGRID intends to award, under laid-down organisational procedures, contract(s) for “Construction of Transit Camp cum Field Hostel at Bidar Station under Transmission System Solar Energy Zone in Bidar (2500MW) through TBCB”

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

Integrity Pact Page 1 of 8

“Construction of Transit Camp cum Field Hostel at Bidar Station under Transmission System Solar Energy Zone in Bidar (2500MW) through TBCB” Package and Specification Number [Spec. No.: SR-I/C&M/WC-4538/2026/ Rfx no.: 5002005032 (SR1/T/W-CIVIL/DOM/B00/26/00536) ] POWERGRID values full compliance with all relevant laws and regulations, and the principles of economical use of resources, and of fairness and transparency in its relations with its Bidders/ Contractors.

In order to achieve these goals, POWERGRID and the above named Bidder/Contractor enter into this agreement called 'Integrity Pact' which will form a part of the bid.

It is hereby agreed by and between the parties as under:

Section I - Commitments of POWERGRID

(1) POWERGRID commits itself to take all measures necessary to prevent corruption and to observe the following principles :

a) No employee of POWERGRID, personally or through family members, will in connection with the tender, or the execution of the contract, demand, take a promise for or accept, for him/herself or third person, any material or other benefit which he/she is not legally entitled to.

b) POWERGRID will, during the tender process treat all Bidder(s) with equity and fairness. POWERGRID will in particular, before and during the tender process, provide to all Bidder(s) the same information and will not provide to any Bidder(s) confidential/ additional information through which the Bidder(s) could obtain an advantage in relation to the tender process or the contract execution.

c) POWERGRID will exclude from evaluation of Bids its such employee(s) who has any personnel interest in the Companies/Agencies participating in the Bidding/Tendering process.

(2) If Chairman and Managing Director obtains information on the conduct of any employee of POWERGRID which is a criminal offence under the relevant Anti-Corruption Laws of India, or if there be a substantive suspicion in this regard, he will inform its Chief Vigilance Officer and in addition can initiate disciplinary actions under its Rules.

Section II - Commitments of the Bidder/Contractor

(1) The Bidder/Contractor commits himself to take all measures necessary to prevent corruption. He commits himself to observe the following principles

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

Integrity Pact Page 2 of 8

during his participation in the tender process and during the contract execution :

a) The Bidder/Contractor will not, directly or through any other person or firm, offer, promise or give to POWERGRID, or to any of POWERGRID's employees involved in the tender process or the execution of the contract or to any third person any material or other benefit which he/she is not legally entitled to, in order to obtain in exchange an advantage during the tender process or the execution of the contract.

b) The Bidder/Contractor will not enter into any illegal agreement or understanding, whether formal or informal with other Bidders/Contractors. This applies in particular to prices, specifications, certifications, subsidiary contracts, submission or non-submission of bids or actions to restrict competitiveness or to introduce cartelization in the bidding process.

c) The Bidder/Contractor will not commit any criminal offence under the relevant Anti-corruption Laws of India; further, the Bidder/Contractor will not use for illegitimate purposes or for purposes of restrictive competition or personal gain, or pass on to others, any information provided by POWERGRID as part of the business relationship, regarding plans, technical proposals and business details, including information contained or transmitted electronically.

d) The Bidder/Contractor of foreign origin shall disclose the name and address of the Agents/representatives in India, if any, involved directly or indirectly in the Bidding. Similarly, the Bidder/Contractor of Indian Nationality shall furnish the name and address of the foreign principals, if any, involved directly or indirectly in the Bidding.

e) The Bidder/Contractor will, when presenting his bid, disclose any and all payments he has made, or committed to or intends to make to agents, brokers or any other intermediaries in connection with the award of the contract and/or with the execution of the contract.

f) The Bidder/Contractor will not misrepresent facts or furnish false/forged documents/informations in order to influence the bidding process or the execution of the contract to the detriment of POWERGRID.

(2) The Bidder/Contractor will not instigate third persons to commit offences outlined above or be an accessory to such offences.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

Integrity Pact Page 3 of 8

Section III- Disqualification from tender process and exclusion from future contracts

(1) If the Bidder, before contract award, has committed a serious transgression through a violation of Section II or in any other form such as to put his reliability or credibility as Bidder into question, POWERGRID may disqualify the Bidder from the tender process or terminate the contract, if already signed, for such reason.

(2) If the Bidder/Contractor has committed a serious transgression through a violation of Section II such as to put his reliability or credibility into question, POWERGRID may after following due procedures also exclude the Bidder/Contractor from future contract award processes. The imposition and duration of the exclusion will be determined by the severity of the transgression. The severity will be determined by the circumstances of the case, in particular the number of transgressions, the position of the transgressors within the company hierarchy of the Bidder/Contractor and the amount of the damage. The exclusion will be imposed for a minimum of 12 months and maximum of 3 years.

(3) If the Bidder/Contractor can prove that he has restored/recouped the damage caused by him and has installed a suitable corruption prevention system, POWERGRID may revoke the exclusion prematurely.

Section IV - Liability for violation of Integrity Pact

(1) If POWERGRID has disqualified the Bidder from the tender process prior to the award under Section III, POWERGRID may forfeit the Bid Guarantee under the Bid.

(2) If POWERGRID has terminated the contract under Section III, POWERGRID may forfeit the Contract Performance Guarantee of this contract besides resorting to other remedies under the contract.

Section V- Previous Transgression

(1) The Bidder shall declare in his Bid that no previous transgressions occurred in the last 3 years with any other Public Sector Undertaking or Government Department that could justify his exclusion from the tender process.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

Integrity Pact Page 4 of 8

(2) If the Bidder makes incorrect statement on this subject, he can be disqualified from the tender process or the contract, if already awarded, can be terminated for such reason.

Section VI - Equal treatment to all Bidders / Contractors

(1) POWERGRID will enter into agreements with identical conditions as this one with all Bidders.

(2) POWERGRID will disqualify from the tender process any bidder who does not sign this Pact or violate its provisions.

Section VII - Punitive Action against violating Bidders / Contractors

If POWERGRID obtains knowledge of conduct of a Bidder or a Contractor or his subcontractor or of an employee or a representative or an associate of a Bidder or Contractor or his Subcontractor which constitutes corruption, or if POWERGRID has substantive suspicion in this regard, POWERGRID will inform the Chief Vigilance Officer (CVO).

(*)Section VIII - Independent External Monitor/Monitors

(1) POWERGRID has appointed a panel of Independent External Monitors (IEMs) for this Pact with the approval of Central Vigilance Commission (CVC), Government of India, out of which one of the IEMs has been indicated in the NIT/IFB.

(2) The IEM is to review independently and objectively, whether and to what extent the parties comply with the obligations under this agreement. He has right of access to all project documentation. The IEM may examine any complaint received by him and submit a report to Chairman-cum-Managing Director, POWERGRID, at the earliest. He may also submit a report directly to the CVO and the CVC, in case of suspicion of serious irregularities attracting the provisions of the PC Act. However, for ensuring the desired transparency and objectivity in dealing with the complaints arising out of any tendering process, the matter shall be referred to the full panel of IEMs, who would examine the records, conduct the investigations and submit report to Chairman-cum-Managing Director, POWERGRID, giving joint findings.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

Integrity Pact Page 5 of 8

(3) The IEM is not subject to instructions by the representatives of the parties and performs his functions neutrally and independently. He reports to the Chairman-cum-Managing Director, POWERGRID.

(4) The Bidder(s)/Contractor(s) accepts that the IEM has the right to access without restriction to all documentation of POWERGRID related to this contract including that provided by the Contractor/Bidder. The Bidder/Contractor will also grant the IEM, upon his request and demonstration of a valid interest, unrestricted and unconditional access to his documentation. The same is applicable to Subcontractors. The IEM is under contractual obligation to treat the information and documents of the Bidder(s)/Contractor(s)/Subcontractor(s) with confidentiality.

(5) POWERGRID will provide to the IEM information as sought by him which could have an impact on the contractual relations between POWERGRID and the Bidder/Contractor related to this contract.

(6) As soon as the IEM notices, or believes to notice, a violation of this agreement, he will so inform the Chairman-cum-Managing Director, POWERGRID and request the Chairman-cum-Managing Director, POWERGRID to discontinue or take corrective action, or to take other relevant action. The IEM can in this regard submit non-binding recommendations. Beyond this, the IEM has no right to demand from the parties that they act in a specific manner, refrain from action or tolerate action. However, the IEM shall give an opportunity to POWERGRID and the Bidder/Contractor, as deemed fit, to present its case before making its recommendations to POWERGRID.

(7) The IEM will submit a written report to the Chairman-cum-Managing Director, POWERGRID within 8 to 10 weeks from the date of reference or intimation to him by POWERGRID and, should the occasion arise, submit proposals for correcting problematic situations.

(8) If the IEM has reported to the Chairman-cum-Managing Director, POWERGRID, a substantiated suspicion of an offence under relevant Anti-Corruption Laws of India, and the Chairman-cum-Managing Director, POWERGRID has not, within the reasonable time taken visible action to proceed against such offence or reported it to the CVO, the Monitor may also transmit this information directly to the CVC, Government of India.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

Integrity Pact Page 6 of 8

(9) The word ‘IEM’ would include both singular and plural.

(*) This Section shall be applicable for only those packages wherein the IEMs have been identified in Section – I : Invitation for Bids and/or Clause ITB 9.3 in Section – III: Bid Data Sheets of Conditions of Contract, Volume-I of the Bidding Documents.

Section IX - Pact Duration

This Pact begins when both parties have legally signed it. It expires for the Contractor after the closure of the contract and for all other Bidder's six month after the contract has been awarded.

Section X - Other Provisions

(1) This agreement is subject to Indian Law. Place of performance and jurisdiction is the establishment of POWERGRID. The Arbitration clause provided in the main tender document / contract shall not be applicable for any issue / dispute arising under Integrity Pact.

(2) Changes and supplements as well as termination notices need to be made in writing.

(3) If the Contractor is a partnership firm or a consortium or Joint Venture, this agreement must be signed by all partners, consortium members and Joint Venture partners.

(4) Nothing in this agreement shall affect the rights of the parties available under the General Conditions of Contract (GCC) and Special Conditions of Contract (SCC).

(5) Views expressed or suggestions/submissions made by the parties and the recommendations of the CVO/IEM# in respect of the violation of this agreement, shall not be relied on or introduced as evidence in the arbitral or judicial proceedings (arising out of the arbitral proceedings) by the parties in connection with the disputes/differences arising out of the subject contract.

# CVO shall be applicable for packages wherein IEM are not identified in Section IFB/BDS of Condition of Contract, Volume-I. IEM shall be applicable for packages wherein IEM are identified in Section IFB/BDS of Condition of Contract, Volume-I.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

Integrity Pact Page 7 of 8

(6) Should one or several provisions of this agreement turn out to be invalid, the remainder of this agreement remains valid. In this case, the parties will strive to come to an agreement to their original intentions.

Signature Signature

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

(Office Seal) (Office Seal)

Designation : #REF!

Witness 1 : Witness 1 :

Designation : Designation :

Witness 2 : Witness 2 :

Designation : Designation :

Integrity Pact Page 8 of 8

[Spec. No.: SR-I/C&M/WC-4538/2026/ Rfx no.: 5002005032 (SR1/T/W-CIVIL/DOM/B00/26/00536) ] ATTACHMENT-11

“Construction of Transit Camp cum Field Hostel at Bidar Station under Transmission System Solar Energy Zone in Bidar (2500MW) through TBCB”

Bidder’s Name and Address (Bidder) : To

Name : 0 Sr.GM(C&M)

Address : 0 Contracts & Materials Department

0 Power Grid Corporation of India Ltd.,

0 Kavadiguda Main Road,

Secunderabad - 500 080

Further, we hereby confirm that except as mentioned in the Schedule – 4 (Alternative, Deviations and Exceptions to the Provisions) hereof and/or the Covering Letter, forming part of our First Envelope :

(i) there are no discrepancies/inconsistencies and deviations/omissions/ reservations to the Bidding Documents, in the Second Envelope bid;

We also confirm that in case any discrepancies/ inconsistencies and deviations/ omissions/ reservations, as referred to in para (i) and (ii) above, is observed in the Second Envelope, the same shall be deemed as withdrawn/rectified without any financial implication, whatsoever to POWERGRID. However, in case of any arithmetical errors, the same shall be governed as per the provision of ITB Sub-Clause 27.2 read in conjunction with BDS

Date 0-Jan-1900 Printed Name 0

Place 0-Jan-1900 Designation 0

[Spec. No.: SR-I/C&M/WC-4538/2026/ Rfx no.: 5002005032 (SR1/T/W-CIVIL/DOM/B00/26/00536) ] ATTACHMENT-10

“Construction of Transit Camp cum Field Hostel at Bidar Station under Transmission System Solar Energy Zone in Bidar (2500MW) through TBCB”

Bidder’s Name and Address (Bidder) : To

Name : 0 Sr.GM(C&M)

Address : 0 Contracts & Materials Department

0 Power Grid Corporation of India Ltd.,

0 Kavadiguda Main Road,

Secunderabad - 500 080

Safety Pact - separately attached herewith in Volume-III.

Date : 0 Printed Name : 0

Place : 0 Designation : 0

[Spec. No.: SR-I/C&M/WC-4538/2026/ Rfx no.: 5002005032 (SR1/T/W-CIVIL/DOM/B00/26/00536) ] ATTACHMENT-13

“Construction of Transit Camp cum Field Hostel at Bidar Station under Transmission System Solar Energy Zone in Bidar (2500MW) through TBCB”

(Declaration regarding Code of Integrity for Public Procurement (CIPP) Policy of POWERGRID)

Bidder’s Name and Address (Bidder) : To

Name : 0 Sr.GM(C&M)

Address : 0 Contracts & Materials Department

0 Power Grid Corporation of India Ltd.,

0 Kavadiguda Main Road,

Secunderabad - 500 080

We hereby declare that we have read and abide by the Code of Integrity for Public Procurement (CIPP) Policy of POWERGRID, as detailed herein below:

Code of Integrity for Public Procurement: 1.1 Employer as well as bidders, suppliers, contractors and consultants should observe the highest standard of ethics and should not indulge in the following prohibited practices, either directly or indirectly, at any stage during the procurement process or during execution of resultant contracts:

i) “Corrupt practice”: making offers, solicitation or acceptance of bribe, rewards or gifts or any material benefit, in exchange for an unfair advantage in the procurement process or to otherwise influence the procurement process or contract execution; ii) “Fraudulent practice”: any omission or misrepresentation that may mislead or attempt to mislead so that financial or other benefits may be obtained or an obligation avoided. This includes making false declaration or providing false information for participation in a tender process or to secure a contract or in execution of the contract; iii) “Anti-competitive practice”: any collusion, bid rigging or anti-competitive arrangement, or any other practice coming under the purview of The Competition Act, 2002, between two or more bidders, with or without the knowledge of the Employer, that may impair the transparency, fairness and the progress of the procurement process or to establish bid prices at artificial, non-competitive levels; iv) “Coercive practice”: harming or threatening to harm, persons or their property to influence their participation in the procurement process or affect the execution of a contract;

v) “Conflict of interest”: any personal, financial, or business relationship between the bidder and any personnel of the procuring entity who are directly or indirectly related to the procurement or execution process of the contract, which can affect the decision of the procuring entity directly or indirectly. vi) “Undue Advantage”: improper use of information obtained by the bidder from the procuring entity with an intent to gain an unfair advantage in the procurement process or for personal gain. This also includes if the bidder (or his allied firm) provided services for the need assessment/ procurement planning of the tender process in which it is participating; vii) “Obstructive practice”: materially impede the Employer’s investigation into allegations of one or more of the above mentioned prohibited practices either by deliberately destroying, falsifying, altering; or by concealing of evidence material to the investigation; or by making false statements to investigators and/or by threatening, harassing or intimidating any party to prevent it from disclosing its knowledge of matters relevant to the investigation or from pursuing the investigation; or by impeding the Employer’s rights of audit or access to information.

1.2 Obligations for Proactive Disclosures i) POWERGRID as well as bidders, suppliers, contractors and consultants, are obliged under Code of Integrity for Public Procurement to suo-moto proactively declare any conflicts of interest (coming under the definition mentioned above – pre-existing or as and as soon as these arise at any stage) in any procurement process or execution of contract. Failure to do so would amount to violation of this code of integrity; and ii) Any bidder must declare, whether asked or not in a bid document, any previous transgressions of such a code of integrity with any entity in any country during the last three years or of being debarred by any other procuring entity. Failure to do so would amount to violation of this code of integrity. iii) To encourage voluntary disclosures, such declarations would not mean automatic disqualification for the bidder making such declarations. The declared conflict of interest may be evaluated and mitigation steps, if possible, may be taken by POWERGRID. Similarly voluntary reporting of previous transgressions of Code of Integrity elsewhere may be evaluated and barring cases of various grades of debarment, an alert watch may be kept on the bidder’s actions in the tender and subsequent contract.

1.3 Punitive Provisions: Without prejudice to and in addition to the rights of POWERGRID to other penal provisions as per the Bidding Documents or Contract, if POWERGRID comes to a conclusion that a (prospective) bidder/supplier, directly or through an agent, has violated this code of integrity in competing for the contract or in executing a contract, POWERGRID may take appropriate measures including one or more of the following: i) if the bid(s) is under consideration in any procurement a) Forfeiture or encashment of Bid Security b) calling off of any pre-contract negotiations, and; c) rejection and exclusion of the bidder from the procurement process ii) if a contract has already been awarded a) Cancellation/termination of the contract in question; b) Forfeiture or encashment of Contract Performance Guarantee (CPG) of the contract in question; iii) Provisions in addition to above: a) Removal from the list of registered suppliers and banning/debarment of the bidder/contractor from participation in future procurements in line with POWERGRID’s policy for “Black-Listing of Firms / Banning of Business”. b) In case of anti-competitive practices, information for further processing may be filed with the Competition Commission of India; c) Initiation of suitable disciplinary or criminal proceedings against any individual or staff found responsible.

1.4 In pursuance to this policy, the Employer will have the right to require that the provision be included in Bidding Documents and in contracts, requiring Bidders, suppliers, and contractors and their sub-contractors to permit the Employer to inspect their accounts and records and other documents relating to bid submission and contract performance under this project only and to have them audited by auditors appointed by the Employer.

Further, we hereby confirm that incase of transgression of CIPP, we are aware that we may get delisted from Registered Suppliers / Contractors and POWERGRID may take other punitive actions such as Cancellation of Contracts, Banning and Blacklisting or action in Competition Commission of India etc.

We hereby confirm that we observe the highest standard of ethics and shall not indulge in the following prohibited practices, either directly or indirectly, at any stage during the procurement process or during execution of resultant contracts:

i) Corrupt Practice

ii) Fradulent Practice

iii) Anti-competitive Practice

iv) Coercive Practice

v) Conflict of Interest

vi) Obstructive Practice

Date 0-Jan-1900 Printed Name 0

Place 0-Jan-1900 Designation 0

[Spec. No.: SR-I/C&M/WC-4538/2026/ Rfx no.: 5002005032 (SR1/T/W-CIVIL/DOM/B00/26/00536) ] ATTACHMENT-14

“Construction of Transit Camp cum Field Hostel at Bidar Station under Transmission System Solar Energy Zone in Bidar (2500MW) through TBCB”

(Declaration in regard to bid capacity)

Bidder’s Name and Address (Bidder) : To

Name: 0 Sr.GM(C&M)

Address: 0 Contracts & Materials Department

0 Power Grid Corporation of India Ltd.,

0 Kavadiguda Main Road,

Secunderabad - 500 080

In support of determining the balace bid capacity of the bidders as stipulated in the Qualification Requirements (QR) in Section-III of the Bidding Documents, we hereby declare the following details:

I) Details of the contracts awarded by SR-I, POWERGRID :

S No. Details of the contracts awarded by SR-I, POWERGRID in FY 2025-26 LOA/ PO reference number along with date of award

II) Details of the tenders floated by SR-I, POWERGRID, for which bidder has submitted their bid:

S No. Details of the tenders floated by SR-I, POWERGRID in FY 2025-26, for which bidder has submitted their bid: Tender reference number (RFx / Specification No.) & date of tender publication

Date : 00-Jan-00 Printed Name : 0

Place : 00-Jan-00 Designation : 0

[Spec. No.: SR-I/C&M/WC-4538/2026/ Rfx no.: 5002005032 (SR1/T/W-CIVIL/DOM/B00/26/00536) ] ATTACHMENT-15

“Construction of Transit Camp cum Field Hostel at Bidar Station under Transmission System Solar Energy Zone in Bidar (2500MW) through TBCB”

(Declaration by the Bidder for 'POWERGRID Whistle Blower and Fraud Prevention Policy')

Bidder’s Name and Address (Bidder) : To

Name : 0 Sr.GM(C&M)

Address : 0 Contracts & Materials Department

0 Power Grid Corporation of India Ltd.,

0 Kavadiguda Main Road,

Secunderabad - 500 080

We hereby declare that we, along with our associate/ collaborators/ sub-contractors/ sub-vendors/consultants/ service providers shall strictly adhere to the 'POWERGRID Whistle Blower and Fraud Prevention Policy'.

We, along with our associate / collaborator / subcontractors / sub-vendors / consultants / service providers shall observe the highest standard of ethics and shall not indulge or allow anybody else working in our organization to indulge in fraudulent activities during execution of the contract and would immediately apprise the Employer about any fraud or suspected fraud as soon as it comes to their notice.

Date 0-Jan-1900 Printed Name 0

Place 0-Jan-1900 Designation 0

[Spec. No.: SR-I/C&M/WC-4538/2026/ Rfx no.: 5002005032 (SR1/T/W-CIVIL/DOM/B00/26/00536) ] Bid Form-1st Envelope

THIS BID IS RESERVED FOR WOMEN BIDDERS ONLY

Bid Proposal Ref. No.

Power Grid Corporation of India Ltd.,

Southern Region -I Headquarters

Kavadiguda Main Road

Secunderabad - 500080 (Telangana)

Name of Contract : “Construction of Transit Camp cum Field Hostel at Bidar Station under Transmission System Solar Energy Zone in Bidar (2500MW) through TBCB”

Dear Ladies and/or Gentlemen,

1.0 Having examined the Bidding Documents, including Amendments the receipt of which is hereby acknowledged, we the undersigned, offer to execute the work under the above-named package in full conformity with the said Bidding Documents. In accordance with ITB Clause 3.2 of the Bidding Documents, as per which the bid shall be submitted by the bidder under “Single Stage - Two Envelope” procedure of bidding. Accordingly, we hereby submit our Bid consisting of Techno – Commercial Part & Price Parts.

2.0 Attachments to the Bid Form

In line with the requirement of the Bidding Documents, we enclose herewith the following Attachments:

(a) Attachment 1 Bid Security, in a separate envelope, for a sum of Rs. 4,20,000 (Rs. Four Lakhs and Twenty Thousand only) initially valid for a period of Seven (7) months from the date set for opening of bids.

(b) Attachment 2 A power of attorney duly authorized by a Notary Public indicating that the person(s) signing the bid have the authority to sign the bid and thus that the bid is binding upon us during the full period of its validity in accordance with the ITB Clause 6.

(c) Attachment 3 Bidder’s Eligibility and Qualifications

(d) Attachment 4 The variation and deviations from the requirements of the Conditions of Contract, Technical Specification and Drawings in your format enclosed with the Bidding Documents, including, inter alia, the cost of withdrawal of the variations and deviations indicated therein

(e) Attachment 5 Work Completion Schedule.

(f) Attachment 6 Information regarding ex-employees of Employer in Bidder’s firm.

(g) Attachment 7 Declaration regarding Social Accountability

(h) Attachment 8 Information for E – payment, PF details and declaration for Micro/Small and Medium Enterprise

(i) Attachment 9 Additional Information

(j) Attachment 10 Integrity Pact

(k) Attachment 11 Declaration

(l) Attachment 12 Safety Pact

(m) Attachment 13 Declaration for Code of Integrity for Public Procurement (CIPP) Policy of POWERGRID.

(n) Attachment 14 Declaration in regard to bid capacity.

(o) Attachment 15 Declaration for 'POWERGRID Whistle Blower and Fraud Prevention Policy'.

(p) Attachment 21 Affidavit for self-certifictaion PPP-MII

(q) Attachment 23 Compliance to the process related to the e-RA

(r) Attachment 26 Certification by the Bidder per DoE Order

(s) Attachment 28 Bid Declaration

3.0 We are aware that our bid is liable to be rejected in case the same contains any deviation/omission from the contractual and commercial conditions and technical Specifications other than those identified in the bid documents.

3.2 We declare that as specified in Bidding Documents, the RATES of all the Goods to be supplied under this contract shall remain FIRM during the currency of the contract and no price adjustment shall be applicable..

4.0 We confirm that except as otherwise specifically provided our Bid Prices include all taxes, duties, levies and charges as may be assessed on us, our Sub-Contractor/Sub-Vendor or their employees by all municipal, state or national government authorities in connection with the Facilities, in and outside of India.

4.1 100% of applicable Taxes and Duties i.e. GST, which are payable by the Employer under the Contract, shall be reimbursed by the Employer on production of satisfactory documentary evidence by the Contractor in accordance with the provisions of the Bidding Documents

4.3 We confirm that we have also registered/we shall also get registered in the GST Network with a GSTIN, in all the states where the project is located and the states from which we shall make our supply of goods.

5.0 Construction of the Contract

5.1 We declare that we have studied the mode of contracting for Domestic Bidders and we are making this proposal with a stipulation that you shall award us Single Contract covering all goods and related services.

6.0 We have read the various clauses and provisions in bid documents and confirm that all the specified stipulations are acceptable to us.

Further we understand that deviation taken in any of the above clauses by us shall make our bid non-responsive as per provision of bidding documents and rejected by you.

7.0 We undertake, if our bid is accepted, to commence the work immediately upon your Notification/Letter of Award to us, and to achieve the completion of works and related services within the time stated in the Bidding Documents.

8.0 If our bid is accepted, we undertake to provide a Performance Security in the form and amounts, and within the times specified in the Bidding Documents.

9.0 We agree to abide by this bid for a period of Six (06) months from the date initially stipulated for opening of bids as stipulated in the Bidding Documents, and it shall remain binding upon us and may be accepted by you at any time before the expiration of that period

10.0 Until a formal Contract is prepared and executed between us, this bid, together with your written acceptance thereof in the form of your Notification of Award shall constitute a binding contract between us.

11.0 We understand that you are not bound to accept the lowest or any bid you may receive.

12.0 We, hereby, declare that only the persons or firms interested in this proposal as principals are named here and that no other persons or firms other than those mentioned herein have any interest in this proposal or in the Contract to be entered into, if the award is made on us, that this proposal is made without any connection with any other person, firm or party likewise submitting a proposal is in all respects for and in good faith, without collusion or fraud.

(a) “Construction of Transit Camp cum Field Hostel at Bidar Station under Transmission System Solar Energy Zone in Bidar (2500MW) through TBCB”

13.5 We declare that items left blank in the Schedules will be deemed to have been included in other items. The TOTAL for each Schedule and the TOTAL of Grand Summary shall be deemed to be the total price for executing the Facilities and sections thereof in complete accordance with the Contract, whether or not each individual item has been priced.

15 Further, we hereby confirm that except as mentioned in the Attachment -4 (Deviations) hereof:

(i) there are no discrepencies/inconsistencies and deviations/omissions/reservations to the Bidding Documents,;

16 We also confirm that in case any discrepencies/inconsitencies and deviations/omissions/reservations, as referred to in para (i) and (ii) above, is observed, the same shall be deemed as withdrawn/rectified without any finacial implication, whatsoever to POWERGRID. However, in case of any artithmetical errors, the same shall be governed as per the provisions of ITB

We, hereby, declare that only the persons or firms interested in this proposal as principals are named here and that no other persons or firms other than those mentioned herein have any interest in this proposal or in the Contract to be entered into, if the award is made on us, that this proposal is made without any connection with any other person, firm or party likewise submitting a proposal is in all respects for and in good faith, without collusion or fraud.

Thanking you, we remain,

Yours faithfully,

For and on behalf of

Date : 00-Jan-00 Printed Name : 0

Place : 00-Jan-00 Designation : 0

Please provide additional information of the Bidder

Business Address :

Country of Incorporation :

State/Province to be indicated :

Name of Principal Officer :

Address of Principal Officer :

Note: Bidders may note that no prescribed proforma has been enclosed for Attachment 2 : Power of Attorney. Bidders may use their own proforma for furnishing the required information with the bid.

USD One Lac Fifty Five Thousand Eight Hundred Eighty Five Only EURO Four Thousand Nine Hundred Sixty Only RMB Ten Thousand Three Hundred Fifty Two Only INR Six Lac Ninety One Thousand Six Hundred Forty Seven Only USD 155885/- + EURO 4960/- + RMB 10352/- + INR 691647/-

USD One Lac Fifty Five Thousand Eight Hundred Eighty Five Only plus EURO Four Thousand Nine Hundred Sixty Only plus RMB Ten Thousand Three Hundred Fifty Two Only plus INR Six Lac Ninety One Thousand Six Hundred Forty Seven Only

85 Eighty Five 60 Sixty 52 Fifty Two 47 Forty Seven

8 Eight Hundred 9 Nine Hundred 3 Three Hundred 6 Six Hundred

55 Fifty Five Thousand 4 Four Thousand 10 Ten Thousand 91 Ninety One Thousand 0 0 0 0 0 plus

1 One Lac 0 0 6 Six Lac 0 0 0 0 1

1 One 1 One 1 One 1 One 0 0 1 0 1

2 Two 2 Two 2 Two 2 Two 0 0 1 1 0

3 Three 3 Three 3 Three 3 Three 0 0 1 1 1

4 Four 4 Four 4 Four 4 Four 0 1 0 0 0

5 Five 5 Five 5 Five 5 Five 0 1 0 0 1

6 Six 6 Six 6 Six 6 Six 0 1 0 1 0

7 Seven 7 Seven 7 Seven 7 Seven 0 1 0 1 1

8 Eight 8 Eight 8 Eight 8 Eight 0 1 1 0 0

9 Nine 9 Nine 9 Nine 9 Nine 0 1 1 0 1

10 Ten 10 Ten 10 Ten 10 Ten 0 1 1 1 0

11 Eleven 11 Eleven 11 Eleven 11 Eleven 1 1 1 1 1 USD One Lac Fifty Five Thousand Eight Hundred Eighty Five Only plus EURO Four Thousand Nine Hundred Sixty Only plus RMB Ten Thousand Three Hundred Fifty Two Only plus INR Six Lac Ninety One Thousand Six Hundred Forty Seven Only

12 Twelve 12 Twelve 12 Twelve 12 Twelve

13 Thirteen 13 Thirteen 13 Thirteen 13 Thirteen

14 Fourteen 14 Fourteen 14 Fourteen 14 Fourteen

15 Fifteen 15 Fifteen 15 Fifteen 15 Fifteen

16 Sixteen 16 Sixteen 16 Sixteen 16 Sixteen 0 0 0 0 0 +

17 Seventeen 17 Seventeen 17 Seventeen 17 Seventeen 0 0 0 0 1 /- +

18 Eighteen 18 Eighteen 18 Eighteen 18 Eighteen 0 0 0 1 0 /-

19 Nineteen 19 Nineteen 19 Nineteen 19 Nineteen 0 0 0 1 1

20 Twenty 20 Twenty 20 Twenty 20 Twenty 0 0 1 0 0

21 Twenty One 21 Twenty One 21 Twenty One 21 Twenty One 0 0 1 0 1

22 Twenty Two 22 Twenty Two 22 Twenty Two 22 Twenty Two 0 0 1 1 0

23 Twenty Three 23 Twenty Three 23 Twenty Three 23 Twenty Three 0 0 1 1 1

24 Twenty Four 24 Twenty Four 24 Twenty Four 24 Twenty Four 0 1 0 0 0

25 Twenty Five 25 Twenty Five 25 Twenty Five 25 Twenty Five 0 1 0 0 1

26 Twenty Six 26 Twenty Six 26 Twenty Six 26 Twenty Six 0 1 0 1 0

27 Twenty Seven 27 Twenty Seven 27 Twenty Seven 27 Twenty Seven 0 1 0 1 1

28 Twenty Eight 28 Twenty Eight 28 Twenty Eight 28 Twenty Eight 0 1 1 0 0

29 Twenty Nine 29 Twenty Nine 29 Twenty Nine 29 Twenty Nine 0 1 1 0 1

30 Thirty 30 Thirty 30 Thirty 30 Thirty 0 1 1 1 0

31 Thirty One 31 Thirty One 31 Thirty One 31 Thirty One 1 1 1 1 1 USD 155885/- + EURO 4960/- + RMB 10352/- + INR 691647/-

32 Thirty Two 32 Thirty Two 32 Thirty Two 32 Thirty Two

33 Thirty Three 33 Thirty Three 33 Thirty Three 33 Thirty Three

34 Thirty Four 34 Thirty Four 34 Thirty Four 34 Thirty Four

35 Thirty Fivr 35 Thirty Fivr 35 Thirty Fivr 35 Thirty Fivr

36 Thirty Six 36 Thirty Six 36 Thirty Six 36 Thirty Six

37 Thirty Seven 37 Thirty Seven 37 Thirty Seven 37 Thirty Seven

38 Thirty Eight 38 Thirty Eight 38 Thirty Eight 38 Thirty Eight

39 Thirty Nine 39 Thirty Nine 39 Thirty Nine 39 Thirty Nine

40 Forty 40 Forty 40 Forty 40 Forty

41 Forty One 41 Forty One 41 Forty One 41 Forty One

42 Forty Two 42 Forty Two 42 Forty Two 42 Forty Two

43 Forty Three 43 Forty Three 43 Forty Three 43 Forty Three

44 Forty Four 44 Forty Four 44 Forty Four 44 Forty Four

45 Forty Five 45 Forty Five 45 Forty Five 45 Forty Five

46 Forty Six 46 Forty Six 46 Forty Six 46 Forty Six

47 Forty Seven 47 Forty Seven 47 Forty Seven 47 Forty Seven

48 Forty Eight 48 Forty Eight 48 Forty Eight 48 Forty Eight

49 Forty Nine 49 Forty Nine 49 Forty Nine 49 Forty Nine

50 Fifty 50 Fifty 50 Fifty 50 Fifty

51 Fifty One 51 Fifty One 51 Fifty One 51 Fifty One

52 Fifty Two 52 Fifty Two 52 Fifty Two 52 Fifty Two

53 Fifty Three 53 Fifty Three 53 Fifty Three 53 Fifty Three

54 Fifty Four 54 Fifty Four 54 Fifty Four 54 Fifty Four

55 Fifty Five 55 Fifty Five 55 Fifty Five 55 Fifty Five

56 Fifty Six 56 Fifty Six 56 Fifty Six 56 Fifty Six

57 Fifty Seven 57 Fifty Seven 57 Fifty Seven 57 Fifty Seven

58 Fifty Eight 58 Fifty Eight 58 Fifty Eight 58 Fifty Eight

59 Fifty Nine 59 Fifty Nine 59 Fifty Nine 59 Fifty Nine

60 Sixty 60 Sixty 60 Sixty 60 Sixty

61 Sixty One 61 Sixty One 61 Sixty One 61 Sixty One

62 Sixty Two 62 Sixty Two 62 Sixty Two 62 Sixty Two

63 Sixty Three 63 Sixty Three 63 Sixty Three 63 Sixty Three

64 Sixty Four 64 Sixty Four 64 Sixty Four 64 Sixty Four

65 Sixty Five 65 Sixty Five 65 Sixty Five 65 Sixty Five

66 Sixty Six 66 Sixty Six 66 Sixty Six 66 Sixty Six

67 Sixty Seven 67 Sixty Seven 67 Sixty Seven 67 Sixty Seven

68 Sixty Eight 68 Sixty Eight 68 Sixty Eight 68 Sixty Eight

69 Sixty Nine 69 Sixty Nine 69 Sixty Nine 69 Sixty Nine

70 Seventy 70 Seventy 70 Seventy 70 Seventy

71 Seventy One 71 Seventy One 71 Seventy One 71 Seventy One

72 Seventy Two 72 Seventy Two 72 Seventy Two 72 Seventy Two

73 Seventy Three 73 Seventy Three 73 Seventy Three 73 Seventy Three

74 Seventy Four 74 Seventy Four 74 Seventy Four 74 Seventy Four

75 Seventy Five 75 Seventy Five 75 Seventy Five 75 Seventy Five

76 Seventy Six 76 Seventy Six 76 Seventy Six 76 Seventy Six

77 Seventy Seven 77 Seventy Seven 77 Seventy Seven 77 Seventy Seven

78 Seventy Eight 78 Seventy Eight 78 Seventy Eight 78 Seventy Eight

79 Seventy Nine 79 Seventy Nine 79 Seventy Nine 79 Seventy Nine

80 Eighty 80 Eighty 80 Eighty 80 Eighty

81 Eighty One 81 Eighty One 81 Eighty One 81 Eighty One

82 Eighty Two 82 Eighty Two 82 Eighty Two 82 Eighty Two

83 Eighty Three 83 Eighty Three 83 Eighty Three 83 Eighty Three

84 Eighty Four 84 Eighty Four 84 Eighty Four 84 Eighty Four

85 Eighty Five 85 Eighty Five 85 Eighty Five 85 Eighty Five

86 Eighty Six 86 Eighty Six 86 Eighty Six 86 Eighty Six

87 Eighty Seven 87 Eighty Seven 87 Eighty Seven 87 Eighty Seven

88 Eighty Eight 88 Eighty Eight 88 Eighty Eight 88 Eighty Eight

89 Eighty Nine 89 Eighty Nine 89 Eighty Nine 89 Eighty Nine

90 Ninety 90 Ninety 90 Ninety 90 Ninety

91 Ninety One 91 Ninety One 91 Ninety One 91 Ninety One

92 Ninety Two 92 Ninety Two 92 Ninety Two 92 Ninety Two

93 Ninety Three 93 Ninety Three 93 Ninety Three 93 Ninety Three

94 Ninety Four 94 Ninety Four 94 Ninety Four 94 Ninety Four

95 Ninety Five 95 Ninety Five 95 Ninety Five 95 Ninety Five

96 Ninety Six 96 Ninety Six 96 Ninety Six 96 Ninety Six

97 Ninety Seven 97 Ninety Seven 97 Ninety Seven 97 Ninety Seven

98 Ninety Eight 98 Ninety Eight 98 Ninety Eight 98 Ninety Eight

99 Ninety Nine 99 Ninety Nine 99 Ninety Nine 99 Ninety Nine

100 One Hundred 100 One Hundred 100 One Hundred 100 One Hundred

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

23 Twenty Three

27 Twenty Seven

28 Twenty Eight

33 Thirty Three

37 Thirty Seven

38 Thirty Eight

73 Seventy Three

74 Seventy Four

75 Seventy Five

77 Seventy Seven

78 Seventy Eight

79 Seventy Nine

83 Eighty Three

87 Eighty Seven

88 Eighty Eight

93 Ninety Three

97 Ninety Seven

98 Ninety Eight

100 One Hundred

Construction of Transit Camp cum Field Hostel at Bidar Station under Transmission System Solar Energy Zone in Bidar (2500MW) through TBCB

THIS BID IS RESERVED FOR WOMEN BIDDERS ONLY

Specification No: Ref: SR-I/C&M/WC-4538/2026 (SR1/T/W-CIVIL/DOM/B00/26/00536) Rfx no.: 5002005032 Please Select

Enter the details of the bidder below: Woman Bidder

Specify type of Bidder Please Select

Name of the Bidder TRUE

Address of Registered Office TRUE

Mobile no. +91 TRUE

Printed Name TRUE

Designation TRUE

Place TRUE False

#REF! ATTACHMENT-10

Name : #REF! #REF!

Address : #REF! #REF!

Integrity Pact is annexed herewith this Volume.

Date : 00-Jan-00 Printed Name : 0

Place : 0 Designation : 0

Instruction for printing & submitting Integrity Pact

1. The requisite format of Integrity Pact is getting generated automatically and displayed here below.

2. Take print out of first page on a non-judicial stamp paper of Rs. 100/- and other seven pages on plain A4 size paper. Such two sets shall be prepared by the bidder.

3. All the pages of both the copies of the Integrity Pact shall be signed by the authorised representative of the bidder and duly stamped.

4. Both the original copies shall be submitted by the bidder in the form of Hard Copy as part of the first envelope before due date & time of submission of the bid.

5. For further details bidders may please refer ITB Clause 9.3 (n).

Between 0 #REF!

Power Grid Corporation of India Limited 0 #REF!

having its Registered Office at B-9, Qutab Institutional Area, Katwaria Sarai, New Delhi – 110016 hereinafter referred to as #REF! #REF!

"POWERGRID", #REF! #REF!

0 #REF! having its Registered Office at ,

hereinafter referred to as

"The Bidder/Contractor"

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

Integrity Pact Page 1 of 8

In order to achieve these goals, POWERGRID and the above named Bidder/Contractor enter into this agreement called 'Integrity Pact' which will form a part of the bid.

It is hereby agreed by and between the parties as under:

Section I - Commitments of POWERGRID

(1) POWERGRID commits itself to take all measures necessary to prevent corruption and to observe the following principles :

a) No employee of POWERGRID, personally or through family members, will in connection with the tender, or the execution of the contract, demand, take a promise for or accept, for him/herself or third person, any material or other benefit which he/she is not legally entitled to.

b) POWERGRID will, during the tender process treat all Bidder(s) with equity and fairness. POWERGRID will in particular, before and during the tender process, provide to all Bidder(s) the same information and will not provide to any Bidder(s) confidential/ additional information through which the Bidder(s) could obtain an advantage in relation to the tender process or the contract execution.

c) POWERGRID will exclude from evaluation of Bids its such employee(s) who has any personnel interest in the Companies/Agencies participating in the Bidding/Tendering process.

(2) If Chairman and Managing Director obtains information on the conduct of any employee of POWERGRID which is a criminal offence under the relevant Anti-Corruption Laws of India, or if there be a substantive suspicion in this regard, he will inform its Chief Vigilance Officer and in addition can initiate disciplinary actions under its Rules.

Section II - Commitments of the Bidder/Contractor

(1) The Bidder/Contractor commits himself to take all measures necessary to prevent corruption. He commits himself to observe the following principles

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

Integrity Pact Page 2 of 8

during his participation in the tender process and during the contract execution :

a) The Bidder/Contractor will not, directly or through any other person or firm, offer, promise or give to POWERGRID, or to any of POWERGRID's employees involved in the tender process or the execution of the contract or to any third person any material or other benefit which he/she is not legally entitled to, in order to obtain in exchange an advantage during the tender process or the execution of the contract.

b) The Bidder/Contractor will not enter into any illegal agreement or understanding, whether formal or informal with other Bidders/Contractors. This applies in particular to prices, specifications, certifications, subsidiary contracts, submission or non-submission of bids or actions to restrict competitiveness or to introduce cartelization in the bidding process.

c) The Bidder/Contractor will not commit any criminal offence under the relevant Anti-corruption Laws of India; further, the Bidder/Contractor will not use for illegitimate purposes or for purposes of restrictive competition or personal gain, or pass on to others, any information provided by POWERGRID as part of the business relationship, regarding plans, technical proposals and business details, including information contained or transmitted electronically.

d) The Bidder/Contractor of foreign origin shall disclose the name and address of the Agents/representatives in India, if any, involved directly or indirectly in the Bidding. Similarly, the Bidder/Contractor of Indian Nationality shall furnish the name and address of the foreign principals, if any, involved directly or indirectly in the Bidding.

e) The Bidder/Contractor will, when presenting his bid, disclose any and all payments he has made, or committed to or intends to make to agents, brokers or any other intermediaries in connection with the award of the contract and/or with the execution of the contract.

f) The Bidder/Contractor will not misrepresent facts or furnish false/forged documents/informations in order to influence the bidding process or the execution of the contract to the detriment of POWERGRID.

(2) The Bidder/Contractor will not instigate third persons to commit offences outlined above or be an accessory to such offences.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

Integrity Pact Page 3 of 8

Section III- Disqualification from tender process and exclusion from future contracts

(1) If the Bidder, before contract award, has committed a serious transgression through a violation of Section II or in any other form such as to put his reliability or credibility as Bidder into question, POWERGRID may disqualify the Bidder from the tender process or terminate the contract, if already signed, for such reason.

(2) If the Bidder/Contractor has committed a serious transgression through a violation of Section II such as to put his reliability or credibility into question, POWERGRID may after following due procedures also exclude the Bidder/Contractor from future contract award processes. The imposition and duration of the exclusion will be determined by the severity of the transgression. The severity will be determined by the circumstances of the case, in particular the number of transgressions, the position of the transgressors within the company hierarchy of the Bidder/Contractor and the amount of the damage. The exclusion will be imposed for a minimum of 12 months and maximum of 3 years.

(3) If the Bidder/Contractor can prove that he has restored/recouped the damage caused by him and has installed a suitable corruption prevention system, POWERGRID may revoke the exclusion prematurely.

Section IV - Liability for violation of Integrity Pact

(1) If POWERGRID has disqualified the Bidder from the tender process prior to the award under Section III, POWERGRID may forfeit the Bid Guarantee under the Bid.

(2) If POWERGRID has terminated the contract under Section III, POWERGRID may forfeit the Contract Performance Guarantee of this contract besides resorting to other remedies under the contract.

Section V- Previous Transgression

(1) The Bidder shall declare in his Bid that no previous transgressions occurred in the last 3 years with any other Public Sector Undertaking or Government Department that could justify his exclusion from the tender process.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

Integrity Pact Page 4 of 8

(2) If the Bidder makes incorrect statement on this subject, he can be disqualified from the tender process or the contract, if already awarded, can be terminated for such reason.

Section VI - Equal treatment to all Bidders / Contractors

(1) POWERGRID will enter into agreements with identical conditions as this one with all Bidders.

(2) POWERGRID will disqualify from the tender process any bidder who does not sign this Pact or violate its provisions.

Section VII - Punitive Action against violating Bidders / Contractors

If POWERGRID obtains knowledge of conduct of a Bidder or a Contractor or his subcontractor or of an employee or a representative or an associate of a Bidder or Contractor or his Subcontractor which constitutes corruption, or if POWERGRID has substantive suspicion in this regard, POWERGRID will inform the Chief Vigilance Officer (CVO).

(*)Section VIII - Independent External Monitor/Monitors

(1) POWERGRID has appointed a panel of Independent External Monitors (IEMs) for this Pact with the approval of Central Vigilance Commission (CVC), Government of India, out of which one of the IEMs has been indicated in the NIT/IFB.

(2) The IEM is to review independently and objectively, whether and to what extent the parties comply with the obligations under this agreement. He has right of access to all project documentation. The IEM may examine any complaint received by him and submit a report to Chairman-cum-Managing Director, POWERGRID, at the earliest. He may also submit a report directly to the CVO and the CVC, in case of suspicion of serious irregularities attracting the provisions of the PC Act. However, for ensuring the desired transparency and objectivity in dealing with the complaints arising out of any tendering process, the matter shall be referred to the full panel of IEMs, who would examine the records, conduct the investigations and submit report to Chairman-cum-Managing Director, POWERGRID, giving joint findings.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

Integrity Pact Page 5 of 8

(3) The IEM is not subject to instructions by the representatives of the parties and performs his functions neutrally and independently. He reports to the Chairman-cum-Managing Director, POWERGRID.

(4) The Bidder(s)/Contractor(s) accepts that the IEM has the right to access without restriction to all documentation of POWERGRID related to this contract including that provided by the Contractor/Bidder. The Bidder/Contractor will also grant the IEM, upon his request and demonstration of a valid interest, unrestricted and unconditional access to his documentation. The same is applicable to Subcontractors. The IEM is under contractual obligation to treat the information and documents of the Bidder(s)/Contractor(s)/Subcontractor(s) with confidentiality.

(5) POWERGRID will provide to the IEM information as sought by him which could have an impact on the contractual relations between POWERGRID and the Bidder/Contractor related to this contract.

(6) As soon as the IEM notices, or believes to notice, a violation of this agreement, he will so inform the Chairman-cum-Managing Director, POWERGRID and request the Chairman-cum-Managing Director, POWERGRID to discontinue or take corrective action, or to take other relevant action. The IEM can in this regard submit non-binding recommendations. Beyond this, the IEM has no right to demand from the parties that they act in a specific manner, refrain from action or tolerate action. However, the IEM shall give an opportunity to POWERGRID and the Bidder/Contractor, as deemed fit, to present its case before making its recommendations to POWERGRID.

(7) The IEM will submit a written report to the Chairman-cum-Managing Director, POWERGRID within 8 to 10 weeks from the date of reference or intimation to him by POWERGRID and, should the occasion arise, submit proposals for correcting problematic situations.

(8) If the IEM has reported to the Chairman-cum-Managing Director, POWERGRID, a substantiated suspicion of an offence under relevant Anti-Corruption Laws of India, and the Chairman-cum-Managing Director, POWERGRID has not, within the reasonable time taken visible action to proceed against such offence or reported it to the CVO, the Monitor may also transmit this information directly to the CVC, Government of India.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

Integrity Pact Page 6 of 8

(9) The word ‘IEM’ would include both singular and plural.

(*) This Section shall be applicable for only those packages wherein the IEMs have been identified in Section – I : Invitation for Bids and/or Clause ITB 9.3 in Section – III: Bid Data Sheets of Conditions of Contract, Volume-I of the Bidding Documents.

Section IX - Pact Duration

This Pact begins when both parties have legally signed it. It expires for the Contractor after the closure of the contract and for all other Bidder's six month after the contract has been awarded.

Section X - Other Provisions

(1) This agreement is subject to Indian Law. Place of performance and jurisdiction is the establishment of POWERGRID. The Arbitration clause provided in the main tender document / contract shall not be applicable for any issue / dispute arising under Integrity Pact.

(2) Changes and supplements as well as termination notices need to be made in writing.

(3) If the Contractor is a partnership firm or a consortium or Joint Venture, this agreement must be signed by all partners, consortium members and Joint Venture partners.

(4) Nothing in this agreement shall affect the rights of the parties available under the General Conditions of Contract (GCC) and Special Conditions of Contract (SCC).

(5) Views expressed or suggestions/submissions made by the parties and the recommendations of the CVO/IEM# in respect of the violation of this agreement, shall not be relied on or introduced as evidence in the arbitral or judicial proceedings (arising out of the arbitral proceedings) by the parties in connection with the disputes/differences arising out of the subject contract.

# CVO shall be applicable for packages wherein IEM are not identified in Section IFB/BDS of Condition of Contract, Volume-I. IEM shall be applicable for packages wherein IEM are identified in Section IFB/BDS of Condition of Contract, Volume-I.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

Integrity Pact Page 7 of 8

(6) Should one or several provisions of this agreement turn out to be invalid, the remainder of this agreement remains valid. In this case, the parties will strive to come to an agreement to their original intentions.

Signature Signature

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

(Office Seal) (Office Seal)

Designation : Designation :

Witness 1 : Witness 1 :

Designation : Designation :

Witness 2 : Witness 2 :

Designation : Designation :

Integrity Pact Page 8 of 8

USD One Lac Fifty Five Thousand Eight Hundred Eighty Five Only EURO Four Thousand Nine Hundred Sixty Only RMB Ten Thousand Three Hundred Fifty Two Only INR Six Lac Ninety One Thousand Six Hundred Forty Seven Only USD 155885/- + EURO 4960/- + RMB 10352/- + INR 691647/-

USD One Lac Fifty Five Thousand Eight Hundred Eighty Five Only plus EURO Four Thousand Nine Hundred Sixty Only plus RMB Ten Thousand Three Hundred Fifty Two Only plus INR Six Lac Ninety One Thousand Six Hundred Forty Seven Only

85 Eighty Five 60 Sixty 52 Fifty Two 47 Forty Seven

8 Eight Hundred 9 Nine Hundred 3 Three Hundred 6 Six Hundred

55 Fifty Five Thousand 4 Four Thousand 10 Ten Thousand 91 Ninety One Thousand 0 0 0 0 0 plus

1 One Lac 0 0 6 Six Lac 0 0 0 0 1

1 One 1 One 1 One 1 One 0 0 1 0 1

2 Two 2 Two 2 Two 2 Two 0 0 1 1 0

3 Three 3 Three 3 Three 3 Three 0 0 1 1 1

4 Four 4 Four 4 Four 4 Four 0 1 0 0 0

5 Five 5 Five 5 Five 5 Five 0 1 0 0 1

6 Six 6 Six 6 Six 6 Six 0 1 0 1 0

7 Seven 7 Seven 7 Seven 7 Seven 0 1 0 1 1

8 Eight 8 Eight 8 Eight 8 Eight 0 1 1 0 0

9 Nine 9 Nine 9 Nine 9 Nine 0 1 1 0 1

10 Ten 10 Ten 10 Ten 10 Ten 0 1 1 1 0

11 Eleven 11 Eleven 11 Eleven 11 Eleven 1 1 1 1 1 USD One Lac Fifty Five Thousand Eight Hundred Eighty Five Only plus EURO Four Thousand Nine Hundred Sixty Only plus RMB Ten Thousand Three Hundred Fifty Two Only plus INR Six Lac Ninety One Thousand Six Hundred Forty Seven Only

12 Twelve 12 Twelve 12 Twelve 12 Twelve

13 Thirteen 13 Thirteen 13 Thirteen 13 Thirteen

14 Fourteen 14 Fourteen 14 Fourteen 14 Fourteen

15 Fifteen 15 Fifteen 15 Fifteen 15 Fifteen

16 Sixteen 16 Sixteen 16 Sixteen 16 Sixteen 0 0 0 0 0 +

17 Seventeen 17 Seventeen 17 Seventeen 17 Seventeen 0 0 0 0 1 /- +

18 Eighteen 18 Eighteen 18 Eighteen 18 Eighteen 0 0 0 1 0 /-

19 Nineteen 19 Nineteen 19 Nineteen 19 Nineteen 0 0 0 1 1

20 Twenty 20 Twenty 20 Twenty 20 Twenty 0 0 1 0 0

21 Twenty One 21 Twenty One 21 Twenty One 21 Twenty One 0 0 1 0 1

22 Twenty Two 22 Twenty Two 22 Twenty Two 22 Twenty Two 0 0 1 1 0

23 Twenty Three 23 Twenty Three 23 Twenty Three 23 Twenty Three 0 0 1 1 1

24 Twenty Four 24 Twenty Four 24 Twenty Four 24 Twenty Four 0 1 0 0 0

25 Twenty Five 25 Twenty Five 25 Twenty Five 25 Twenty Five 0 1 0 0 1

26 Twenty Six 26 Twenty Six 26 Twenty Six 26 Twenty Six 0 1 0 1 0

27 Twenty Seven 27 Twenty Seven 27 Twenty Seven 27 Twenty Seven 0 1 0 1 1

28 Twenty Eight 28 Twenty Eight 28 Twenty Eight 28 Twenty Eight 0 1 1 0 0

29 Twenty Nine 29 Twenty Nine 29 Twenty Nine 29 Twenty Nine 0 1 1 0 1

30 Thirty 30 Thirty 30 Thirty 30 Thirty 0 1 1 1 0

31 Thirty One 31 Thirty One 31 Thirty One 31 Thirty One 1 1 1 1 1 USD 155885/- + EURO 4960/- + RMB 10352/- + INR 691647/-

32 Thirty Two 32 Thirty Two 32 Thirty Two 32 Thirty Two

33 Thirty Three 33 Thirty Three 33 Thirty Three 33 Thirty Three

34 Thirty Four 34 Thirty Four 34 Thirty Four 34 Thirty Four

35 Thirty Fivr 35 Thirty Fivr 35 Thirty Fivr 35 Thirty Fivr

36 Thirty Six 36 Thirty Six 36 Thirty Six 36 Thirty Six

37 Thirty Seven 37 Thirty Seven 37 Thirty Seven 37 Thirty Seven

38 Thirty Eight 38 Thirty Eight 38 Thirty Eight 38 Thirty Eight

39 Thirty Nine 39 Thirty Nine 39 Thirty Nine 39 Thirty Nine

40 Forty 40 Forty 40 Forty 40 Forty

41 Forty One 41 Forty One 41 Forty One 41 Forty One

42 Forty Two 42 Forty Two 42 Forty Two 42 Forty Two

43 Forty Three 43 Forty Three 43 Forty Three 43 Forty Three

44 Forty Four 44 Forty Four 44 Forty Four 44 Forty Four

45 Forty Five 45 Forty Five 45 Forty Five 45 Forty Five

46 Forty Six 46 Forty Six 46 Forty Six 46 Forty Six

47 Forty Seven 47 Forty Seven 47 Forty Seven 47 Forty Seven

48 Forty Eight 48 Forty Eight 48 Forty Eight 48 Forty Eight

49 Forty Nine 49 Forty Nine 49 Forty Nine 49 Forty Nine

50 Fifty 50 Fifty 50 Fifty 50 Fifty

51 Fifty One 51 Fifty One 51 Fifty One 51 Fifty One

52 Fifty Two 52 Fifty Two 52 Fifty Two 52 Fifty Two

53 Fifty Three 53 Fifty Three 53 Fifty Three 53 Fifty Three

54 Fifty Four 54 Fifty Four 54 Fifty Four 54 Fifty Four

55 Fifty Five 55 Fifty Five 55 Fifty Five 55 Fifty Five

56 Fifty Six 56 Fifty Six 56 Fifty Six 56 Fifty Six

57 Fifty Seven 57 Fifty Seven 57 Fifty Seven 57 Fifty Seven

58 Fifty Eight 58 Fifty Eight 58 Fifty Eight 58 Fifty Eight

59 Fifty Nine 59 Fifty Nine 59 Fifty Nine 59 Fifty Nine

60 Sixty 60 Sixty 60 Sixty 60 Sixty

61 Sixty One 61 Sixty One 61 Sixty One 61 Sixty One

62 Sixty Two 62 Sixty Two 62 Sixty Two 62 Sixty Two

63 Sixty Three 63 Sixty Three 63 Sixty Three 63 Sixty Three

64 Sixty Four 64 Sixty Four 64 Sixty Four 64 Sixty Four

65 Sixty Five 65 Sixty Five 65 Sixty Five 65 Sixty Five

66 Sixty Six 66 Sixty Six 66 Sixty Six 66 Sixty Six

67 Sixty Seven 67 Sixty Seven 67 Sixty Seven 67 Sixty Seven

68 Sixty Eight 68 Sixty Eight 68 Sixty Eight 68 Sixty Eight

69 Sixty Nine 69 Sixty Nine 69 Sixty Nine 69 Sixty Nine

70 Seventy 70 Seventy 70 Seventy 70 Seventy

71 Seventy One 71 Seventy One 71 Seventy One 71 Seventy One

72 Seventy Two 72 Seventy Two 72 Seventy Two 72 Seventy Two

73 Seventy Three 73 Seventy Three 73 Seventy Three 73 Seventy Three

74 Seventy Four 74 Seventy Four 74 Seventy Four 74 Seventy Four

75 Seventy Five 75 Seventy Five 75 Seventy Five 75 Seventy Five

76 Seventy Six 76 Seventy Six 76 Seventy Six 76 Seventy Six

77 Seventy Seven 77 Seventy Seven 77 Seventy Seven 77 Seventy Seven

78 Seventy Eight 78 Seventy Eight 78 Seventy Eight 78 Seventy Eight

79 Seventy Nine 79 Seventy Nine 79 Seventy Nine 79 Seventy Nine

80 Eighty 80 Eighty 80 Eighty 80 Eighty

81 Eighty One 81 Eighty One 81 Eighty One 81 Eighty One

82 Eighty Two 82 Eighty Two 82 Eighty Two 82 Eighty Two

83 Eighty Three 83 Eighty Three 83 Eighty Three 83 Eighty Three

84 Eighty Four 84 Eighty Four 84 Eighty Four 84 Eighty Four

85 Eighty Five 85 Eighty Five 85 Eighty Five 85 Eighty Five

86 Eighty Six 86 Eighty Six 86 Eighty Six 86 Eighty Six

87 Eighty Seven 87 Eighty Seven 87 Eighty Seven 87 Eighty Seven

88 Eighty Eight 88 Eighty Eight 88 Eighty Eight 88 Eighty Eight

89 Eighty Nine 89 Eighty Nine 89 Eighty Nine 89 Eighty Nine

90 Ninety 90 Ninety 90 Ninety 90 Ninety

91 Ninety One 91 Ninety One 91 Ninety One 91 Ninety One

92 Ninety Two 92 Ninety Two 92 Ninety Two 92 Ninety Two

93 Ninety Three 93 Ninety Three 93 Ninety Three 93 Ninety Three

94 Ninety Four 94 Ninety Four 94 Ninety Four 94 Ninety Four

95 Ninety Five 95 Ninety Five 95 Ninety Five 95 Ninety Five

96 Ninety Six 96 Ninety Six 96 Ninety Six 96 Ninety Six

97 Ninety Seven 97 Ninety Seven 97 Ninety Seven 97 Ninety Seven

98 Ninety Eight 98 Ninety Eight 98 Ninety Eight 98 Ninety Eight

99 Ninety Nine 99 Ninety Nine 99 Ninety Nine 99 Ninety Nine

100 One Hundred 100 One Hundred 100 One Hundred 100 One Hundred

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

23 Twenty Three

27 Twenty Seven

28 Twenty Eight

33 Thirty Three

37 Thirty Seven

38 Thirty Eight

73 Seventy Three

74 Seventy Four

75 Seventy Five

77 Seventy Seven

78 Seventy Eight

79 Seventy Nine

83 Eighty Three

87 Eighty Seven

88 Eighty Eight

93 Ninety Three

97 Ninety Seven

98 Ninety Eight

100 One Hundred

Construction of Transit Camp cum Field Hostel at Bidar Station under Transmission System Solar Energy Zone in Bidar (2500MW) through TBCB

Schedule-I : DSR Scheduled Items

Bidder’s Name and Address (Sole Bidder) : 0 Contract Services

Address : 0 Power Grid Corporation of India Ltd.,

0 Southern Region Transmission system -I

0 Kavadiguda Main Raod, Secunderabad - 500080

All prices are in INR

Sl. No. DSR 2023 Ref No: Service Number SAC (Service Accounting Codes) Whether SAC in column ‘4’ is confirmed. If not indicate applicable the SAC # Rate of GST applicable ( in %) Whether rate of GST in column ‘6’ is confirmed. If not indicate applicable rate of GST # Description (DSR'23 Items- Civil Works) Unit Quantity Unit Erection Charges as per DSR incl. GST Unit Erection Charges as per DSR excl. GST Unit Erection Charges incl. Escl.@3% excluding GST Rates excl. GST (as per Quoted Percentage) GST % Amount as per DSR excluding GST GST on DSR Amount Quoted Amount excluding GST GST on Quoted Amount

Part-I CIVIL SCHEDULE ITEMS

SUB HEAD : 1.0 CARRIAGE OF MATERIALS

1 1.1.2 CARRIAGE OF MATERIALS By Mechanical Transport including loading,unloading and stacking Earth Up to 2 Km cum 110.00 245.82 208.32 214.57 214.57 18.00% 23,602.70 4,248.49 23,602.70 4,248.49

2 1.1.4 CARRIAGE OF MATERIALS By Mechanical Transport including loading,unloading and stacking Excavated Rock Up to 2 Km cum 182.00 393.32 333.32 343.32 343.32 18.00% 62,484.24 11,247.16 62,484.24 11,247.16

SUB HEAD : 2.0 EARTH WORK

3 2.6.1 Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge. All kinds of soil cum 425.00 177.50 150.42 154.94 154.94 18.00% 65,849.50 11,852.91 65,849.50 11,852.91

4 2.7.1 Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. Ordinary rock cum 122.00 498.90 422.80 435.48 435.48 18.00% 53,128.56 9,563.14 53,128.56 9,563.14

5 2.7.2 Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. Hard rock (Requiring Balsting) cum 61.00 874.40 741.02 763.25 763.25 18.00% 46,558.25 8,380.49 46,558.25 8,380.49

6 2.8.1 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil cum 123.00 260.30 220.59 227.21 227.21 18.00% 27,946.83 5,030.43 27,946.83 5,030.43

7 2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift. cum 110.00 196.00 166.10 171.08 171.08 18.00% 18,818.80 3,387.38 18,818.80 3,387.38

8 2.25(a) Excavating, supplying, stacking and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in foundation trenches, plinth, sides of foundation etc. complete for all lift. cum 111.00 700.50 593.64 611.45 611.45 18.00% 67,870.95 12,216.77 67,870.95 12,216.77

9 2.34.1 Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos/ Lindane emulsifiable concentrate of 20% Litre 100.00 234.75 198.94 204.91 204.91 18.00% 20,491.00 3,688.38 20,491.00 3,688.38

SUB HEAD : 4.0 CONCRETE WORK

10 4.1.3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-lll) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) cum 7.00 7878.50 6676.69 6877.00 6,877.00 18.00% 48,139.00 8,665.02 48,139.00 8,665.02

11 4.1.8 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-lll) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) cum 40.00 6812.00 5772.88 5946.07 5,946.07 18.00% 237,842.80 42,811.70 237,842.80 42,811.70

12 4.2.3 Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:2:4 (1 Cement : 2 coarse sand (zone-lll) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) Cum 3.00 9895.20 8385.76 8637.34 8,637.34 18.00% 25,912.02 4,664.16 25,912.02 4,664.16

13 4.3.1 Centering and shuttering including strutting,propping etc. and removal of form work for : Foundations, footings, bases for columns Sqm 97.00 392.15 332.33 342.30 342.30 18.00% 33,203.10 5,976.56 33,203.10 5,976.56

14 4.10 Providing and laying damp-proof course 40 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-lll) derived from natural sources : 4 graded stone aggregate 12.5 mm nominal size derived from natural sources) Sqm 58.00 410.85 348.18 358.62 358.62 18.00% 20,799.96 3,743.99 20,799.96 3,743.99

15 4.12 Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification. per bag of 50kg cement used 15.00 18.15 15.38 15.84 15.84 18.00% 237.60 42.77 237.60 42.77

16 4.13 Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. Sqm 58.00 146.15 123.86 127.57 127.57 18.00% 7,399.06 1,331.83 7,399.06 1,331.83

17 4.17 Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-lll) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. Sqm 90.00 749.30 635.00 654.05 654.05 18.00% 58,864.50 10,595.61 58,864.50 10,595.61

SUB HEAD : 5.0 REINFORCED CEMENT CONCRETE

18 5.9.1 Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete. Sqm 106.00 392.15 332.33 342.30 342.30 18.00% 36,283.80 6,531.08 36,283.80 6,531.08

19 5.9.2 Centering and shuttering including strutting, propping etc. and removal of form for Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. Sqm 5.00 842.50 713.98 735.40 735.40 18.00% 3,677.00 661.86 3,677.00 661.86

20 5.9.3 Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform Sqm 443.00 927.25 785.81 809.38 809.38 18.00% 358,555.34 64,539.96 358,555.34 64,539.96

21 5.9.5 Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers Sqm 841.00 736.40 624.07 642.79 642.79 18.00% 540,586.39 97,305.55 540,586.39 97,305.55

22 5.9.6 Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts Sqm 461.00 961.30 814.66 839.10 839.10 18.00% 386,825.10 69,628.52 386,825.10 69,628.52

23 5.9.7 Centering and shuttering including strutting, propping etc. and removal of form for Stairs, (excluding landings) except spiral-staircases Sqm 24.00 764.95 648.26 667.71 667.71 18.00% 16,025.04 2,884.51 16,025.04 2,884.51

24 5.9.15 Centering and shuttering including strutting, propping etc. and removal of form for Small lintels not exceeding 1.5 m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like. Sqm 16.00 392.15 332.33 342.30 342.30 18.00% 5,476.80 985.82 5,476.80 985.82

25 5.9.16.1 Centering and shuttering including strutting, propping etc. and removal of form for Edges of slabs and breaks in floors and walls Under 20 cm wide Metre 153.00 208.55 176.74 182.04 182.04 18.00% 27,852.12 5,013.38 27,852.12 5,013.38

26 5.9.19 Centering and shuttering including strutting, propping etc. and removal of form for Weather shed, Chaijjas, corbels etc., including edges Sqm 20.00 951.10 806.02 830.20 830.20 18.00% 16,604.00 2,988.72 16,604.00 2,988.72

27 5.22.6 & 5.22A.6 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level and above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. kg 25472.00 107.85 91.40 94.14 94.14 18.00% 2,397,934.08 431,628.13 2,397,934.08 431,628.13

28 5.33.1.1 Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge, for the following grades of concrete.: Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All works upto plinth level. Concrete of M25 grade with minimum cement content of 330 kg /cum Cum 99.00 9504.75 8054.87 8296.52 8,296.52 18.00% 821,355.48 147,843.99 821,355.48 147,843.99

29 5.33.2.1 Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge, for the following grades of concrete.: Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All works above plinth level upto floor V level. Concrete of M25 grade with minimum cement content of 330 kg /cum Cum 177.00 9860.40 8356.27 8606.96 8,606.96 18.00% 1,523,431.92 274,217.75 1,523,431.92 274,217.75

30 5.35 Add for using extra cement in the items of design mix over and above the specified cement content therein. Quintal 91.00 733.50 621.61 640.26 640.26 18.00% 58,263.66 10,487.46 58,263.66 10,487.46

6.0 MASONRY WORK

31 6.15 Extra for providing and placing in position 2 Nos 6 mm dia. M.S. bars at every third course of half brick masonry. Sqm 372.00 104.80 88.81 91.48 91.48 18.00% 34,030.56 6,125.50 34,030.56 6,125.50

8.0 CLADDING WORK

32 8.2.2.1 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. Granite stone slab of colour black, Cherry/Ruby red Area of slab upto 0.50 sqm Sqm 44.00 5413.50 4587.71 4725.34 4,725.34 18.00% 207,914.96 37,424.69 207,914.96 37,424.69

33 8.2.2.2 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. Granite stone slab of colour black, Cherry/Ruby red Area of slab over 0.50 sqm Sqm 12.00 5136.30 4352.80 4483.38 4,483.38 18.00% 53,800.56 9,684.10 53,800.56 9,684.10

34 8.3.2 Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work Metre 75.00 510.95 433.01 446.00 446.00 18.00% 33,450.00 6,021.00 33,450.00 6,021.00

35 8.4 Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete. Metre 10.00 568.55 481.82 496.28 496.28 18.00% 4,962.80 893.30 4,962.80 893.30

36 8.5 Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. Each 1.00 978.70 829.41 854.29 854.29 18.00% 854.29 153.77 854.29 153.77

37 8.31 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. Sqm 222.00 1267.95 1074.53 1106.77 1,106.77 18.00% 245,702.94 44,226.53 245,702.94 44,226.53

9.00 WOOD AND PVC WORK

38 9.1.1 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Second class teak wood Cum 2.00 142949.70 121143.81 124778.13 124,778.13 18.00% 249,556.26 44,920.13 249,556.26 44,920.13

39 9.7.7.1 Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Float glass panes 4 mm thick glass pane (weight not less than 10 kg/sqm). Sqm 5.00 2241.80 1899.83 1956.83 1,956.83 18.00% 9,784.15 1,761.15 9,784.15 1,761.15

40 9.7.7.2 Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Float glass panes 5.0 mm thick glass panes (weight not less than 12.50 kg/sqm). Sqm 38.00 2600.45 2203.77 2269.88 2,269.88 18.00% 86,255.44 15,525.98 86,255.44 15,525.98

41 9.7.8 Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4 mm wide aperture with matching wood beading Sqm 19.00 1800.45 1525.81 1571.58 1,571.58 18.00% 29,860.02 5,374.80 29,860.02 5,374.80

42 9.12 Extra for providing frosted glass panes 4 mm thick (weight not less than 10 kg per sqm) instead of ordinary float glass panes 4 mm thick (weight not less than 10 kg per sqm) in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured). Sqm 5.00 176.40 149.49 153.98 153.98 18.00% 769.90 138.58 769.90 138.58

43 9.20.1 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part |) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including IS] marked Stainless Steel butt hinges with necessary screws Sqm 52.00 3473.85 2943.94 3032.26 3,032.26 18.00% 157,677.52 28,381.95 157,677.52 28,381.95

44 9.23 Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). Sqm 52.00 462.35 391.82 403.58 403.58 18.00% 20,986.16 3,777.51 20,986.16 3,777.51

45 9.47.2 Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets : 25 mm dia (heavy type) Metre 66.00 186.40 157.97 162.71 162.71 18.00% 10,738.86 1,932.99 10,738.86 1,932.99

46 9.48.2 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. Kg 300.00 238.35 201.99 208.05 208.05 18.00% 62,415.00 11,234.70 62,415.00 11,234.70

47 9.84 Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. Each 14.00 983.15 833.18 858.17 858.17 18.00% 12,014.38 2,162.59 12,014.38 2,162.59

48 9.96.1 Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16 mm Each 50.00 303.25 256.99 264.70 264.70 18.00% 13,235.00 2,382.30 13,235.00 2,382.30

49 9.96.2 Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm Each 12.00 260.60 220.85 227.47 227.47 18.00% 2,729.64 491.34 2,729.64 491.34

50 9.97.1 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 300x10 mm Each 38.00 130.10 110.25 113.56 113.56 18.00% 4,315.28 776.75 4,315.28 776.75

51 9.97.4 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 150x10 mm Each 52.00 82.55 69.96 72.06 72.06 18.00% 3,747.12 674.48 3,747.12 674.48

52 9.100.1 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm Each 96.00 66.25 56.14 57.83 57.83 18.00% 5,551.68 999.30 5,551.68 999.30

53 9.101.2 Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper Each 38.00 72.35 61.31 63.15 63.15 18.00% 2,399.70 431.95 2,399.70 431.95

54 9.114.2 Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. Double strip (horizontal type) Each 32.00 39.70 33.64 34.65 34.65 18.00% 1,108.80 199.58 1,108.80 199.58

55 9.129 Providing and fixing cup board shutters 25 mm thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked, exterior grade (Grade | Type Il), having one side decorative lamination and other side balancing lamination, including IInd class teak wood lipping of 25 mm wide x12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of the Engineer-in-Charge Sqm 4.00 2307.35 1955.38 2014.04 2,014.04 18.00% 8,056.16 1,450.11 8,056.16 1,450.11

56 9.147.A4.2 Providing and fixing factory made uPVC glazed/wire mesh windows/ doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately. Note:- Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for : (i) Sites with basic wind speed > 45 m/sec as per IS 875 — Part 3 (ii) Sites with structure height more than 20m for all wind speeds Three track three panels sliding window with two glazed & one wire mesh panels with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body. Using R3 series with frame (98 mm & above) x (40 mm & above) & both glazed and fly screen sash (30 mm & above) x (55 mm & above) with zinc alloy (Zamak) powder coated handle on every glazed panel along with multi-point locking system. (Height upto 1.8m). Sqm 38.00 10874.20 9215.42 9491.89 9,491.89 18.00% 360,691.82 64,924.53 360,691.82 64,924.53

57 9.147.C2.3 Providing and fixing factory made uPVC glazed/wire mesh windows/ doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately. Note:- Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for : (i) Sites with basic wind speed > 45 m/sec as per IS 875 — Part 3 (ii) Sites with structure height more than 20m for all wind speeds Fixed window / ventilator with mullion / transom. Using R3 series with frame (55 mm & above ) x (45 mm & above) & mullion (55 mm & above) x (65 mm & above). (Height upto 2.5 metre) Sqm 5.00 7827.75 6633.69 6832.70 6,832.70 18.00% 34,163.50 6,149.43 34,163.50 6,149.43

10.0 STEEL WORK

58 10.25.2 Steel work welded in built up sections/ framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works Kg 1298.00 172.60 146.27 150.66 150.66 18.00% 195,556.68 35,200.20 195,556.68 35,200.20

59 10.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). Kg 640.00 772.40 654.58 674.21 674.21 18.00% 431,494.40 77,668.99 431,494.40 77,668.99

SUB HEAD : 11.0 FLOORING

60 11.23.5 Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with : Udaipur green marble Sqm 32.00 2428.60 2058.14 2119.88 2,119.88 18.00% 67,836.16 12,210.51 67,836.16 12,210.51

61 11.24 Extra for pre finished nosing to treads of steps of marble stone. Metre 62.00 719.90 610.08 628.39 628.39 18.00% 38,960.18 7,012.83 38,960.18 7,012.83

62 11.25 Extra for marble stone flooring in treads of steps and risers using single length up to 2.00 metre. Sqm 32.00 851.80 721.86 743.52 743.52 18.00% 23,792.64 4,282.68 23,792.64 4,282.68

63 11.37 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. Sqm 45.00 1096.55 929.28 957.16 957.16 18.00% 43,072.20 7,753.00 43,072.20 7,753.00

64 11.41A.2.1 Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to 1S:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed vitrified floor tiles polished finish of size. Size of Tile 600 x 600 mm Sqm 445.00 1502.75 1273.52 1311.72 1,311.72 18.00% 583,715.40 105,068.77 583,715.40 105,068.77

65 11.41A.3.1 Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to 1S:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles Matt/Antiskid finish of size. Size of Tile 600 x 600 mm Sqm 58.00 1464.85 1241.40 1278.64 1,278.64 18.00% 74,161.12 13,349.00 74,161.12 13,349.00

66 11.55.1 Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. Sqm 33.00 3186.70 2700.59 2781.61 2,781.61 18.00% 91,793.13 16,522.76 91,793.13 16,522.76

SUB HEAD : 12.0 ROOFING

67 12.20 Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete. Sqm 13.00 709.75 601.48 619.53 619.53 18.00% 8,053.89 1,449.70 8,053.89 1,449.70

68 12.21.1 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75 mm deep chase Metre 143.00 305.15 258.60 266.36 266.36 18.00% 38,089.48 6,856.11 38,089.48 6,856.11

69 12.22 Making khurras 45x45 cm with average minimum thickness of 5cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. Each 8.00 298.25 252.75 260.34 260.34 18.00% 2,082.72 374.89 2,082.72 374.89

70 12.41.2 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter Metre 63.00 377.40 319.83 329.43 329.43 18.00% 20,754.09 3,735.74 20,754.09 3,735.74

71 12.42.1.2 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Coupler 110 mm Each 17.00 136.15 115.38 118.84 118.84 18.00% 2,020.28 363.65 2,020.28 363.65

72 12.42.3.2 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single tee with door 110x110x110 mm Each 9.00 234.15 198.43 204.39 204.39 18.00% 1,839.51 331.11 1,839.51 331.11

73 12.42.5.2 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5° 110 mm bend Each 10.00 150.35 127.42 131.24 131.24 18.00% 1,312.40 236.23 1,312.40 236.23

74 12.42.6.2 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Shoe (Plain) 110 mm Shoe Each 10.00 131.85 111.74 115.09 115.09 18.00% 1,150.90 207.16 1,150.90 207.16

75 12.43.2 Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm Each 45.00 371.30 314.66 324.10 324.10 18.00% 14,584.50 2,625.21 14,584.50 2,625.21

76 12.44 Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. Each 10.00 54.70 46.36 47.75 47.75 18.00% 477.50 85.95 477.50 85.95

SUB HEAD : 13.0 FINISHING

78 13.5.2 15 mm cement plaster on rough side of single or half brick wall of mix : 1:6 (1 cement: 6 coarse sand) Sqm 376.00 395.35 335.04 345.09 345.09 18.00% 129,753.84 23,355.69 129,753.84 23,355.69

79 13.9.1 Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement.:12 mm cement plaster Sqm 221.00 449.55 380.97 392.40 392.40 18.00% 86,720.40 15,609.67 86,720.40 15,609.67

80 13.11 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement: 5 coarse sand) finished with a top layer 6mm thick cement plaster 1:6 (1 cement: 6 fine sand). Sqm 1401.00 518.55 439.45 452.63 452.63 18.00% 634,134.63 114,144.23 634,134.63 114,144.23

82 13.21 Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers. per bag of 50kg cement used in the mix 176.00 22.10 18.73 19.29 19.29 18.00% 3,395.04 611.11 3,395.04 611.11

83 13.46.1 Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) sqm 1401.00 160.60 136.10 140.18 140.18 18.00% 196,392.18 35,350.59 196,392.18 35,350.59

84 13.62.1 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture Sqm 37.00 226.25 191.74 197.49 197.49 18.00% 7,307.13 1,315.28 7,307.13 1,315.28

85 13.80 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. Sqm 1745.00 156.05 132.25 136.21 136.21 18.00% 237,686.45 42,783.56 237,686.45 42,783.56

86 13.82.2 Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats Sqm 1745.00 137.45 116.48 119.98 119.98 18.00% 209,365.10 37,685.72 209,365.10 37,685.72

87 13.85.1 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre Sqm 100.00 70.35 59.62 61.41 61.41 18.00% 6,141.00 1,105.38 6,141.00 1,105.38

88 13.85.3 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre Sqm 1745.00 73.95 62.67 64.55 64.55 18.00% 112,639.75 20,275.16 112,639.75 20,275.16

SUB HEAD : 16.0 ROAD WORK

90 16.1 Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earthwith lead upto 50 metres. Sqm 75.00 218.90 185.51 191.07 191.07 18.00% 14,330.25 2,579.45 14,330.25 2,579.45

91 16.45 Providing and fixing pre-moulded joint filler in expansion joints of RCC roads / CC pavements after making the joints dust free with high pressure air jet cleaners, all complete as per direction of the Engineer-in-Charge. (Pre-moulded joint fillers shall be made of bitumen hot sealing compound depth per impregnated fibre board having impregnation more than 35%, conforming cm width to IS:1838 for fibre board and IS: 1834 for hot sealing bitumen compound per metre grade A.) Per Cm depth per cm width per meter length 135.00 5.30 4.49 4.63 4.63 18.00% 625.05 112.51 625.05 112.51

92 16.75 Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-in-charge. (The panel shuttering work shall be paid for separately). (Note:- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/ recoverable separately). cum 8.00 9823.80 8325.25 8575.01 8,575.01 18.00% 68,600.08 12,348.01 68,600.08 12,348.01

SUB HEAD : 17.0 SANITARY INSTALLATIONS

93 17.2.1 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid Each 6.00 6515.55 5521.65 5687.30 5,687.30 18.00% 34,123.80 6,142.28 34,123.80 6,142.28

94 17.3.1 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid Each 5.00 8006.60 6785.25 6988.81 6,988.81 18.00% 34,944.05 6,289.93 34,944.05 6,289.93

95 17.7.4 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap Each 11.00 1879.20 1592.54 1640.32 1,640.32 18.00% 18,043.52 3,247.83 18,043.52 3,247.83

96 17.8 Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. Each 5.00 1683.35 1426.57 1469.36 1,469.36 18.00% 7,346.80 1,322.42 7,346.80 1,322.42

97 17.10.1.1 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 250 mm Each 1.00 6945.60 5886.10 6062.68 6,062.68 18.00% 6,062.68 1,091.28 6,062.68 1,091.28

98 17.22A Providing and fixing CP Brass 32 mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. Each 5.00 1034.80 876.95 903.26 903.26 18.00% 4,516.30 812.93 4,516.30 812.93

99 17.28.1.1 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 32 mm dia each 6.00 103.90 88.05 90.69 90.69 18.00% 544.14 97.95 544.14 97.95

100 17.28.1.2 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 40 mm dia each 1.00 116.70 98.90 101.87 101.87 18.00% 101.87 18.34 101.87 18.34

101 17.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. Each 10.00 1607.95 1362.67 1403.55 1,403.55 18.00% 14,035.50 2,526.39 14,035.50 2,526.39

102 17.32.2 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm each 2.00 1361.80 1154.07 1188.69 1,188.69 18.00% 2,377.38 427.93 2,377.38 427.93

103 17.33 Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. Each 10.00 1083.50 918.22 945.77 945.77 18.00% 9,457.70 1,702.39 9,457.70 1,702.39

104 17.34.1 Providing and fixing toilet paper holder : C.P. brass Each 12.00 803.70 681.10 701.53 701.53 18.00% 8,418.36 1,515.30 8,418.36 1,515.30

SUB HEAD : 18.0 WATER SUPPLY

105 18.7.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 25 mm nominal dia Pipes Metre 20.00 401.55 340.30 350.51 350.51 18.00% 7,010.20 1,261.84 7,010.20 1,261.84

106 18.7.4 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 32 mm nominal dia Pipes Metre 20.00 518.75 439.62 452.81 452.81 18.00% 9,056.20 1,630.12 9,056.20 1,630.12

107 18.7.5 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 40 mm nominal dia Pipes Metre 50.00 702.95 595.72 613.59 613.59 18.00% 30,679.50 5,522.31 30,679.50 5,522.31

108 18.8.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal dia Pipes Metre 12.00 497.80 421.86 434.52 434.52 18.00% 5,214.24 938.56 5,214.24 938.56

109 18.8.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal dia Pipes Metre 120.00 537.60 455.59 469.26 469.26 18.00% 56,311.20 10,136.02 56,311.20 10,136.02

110 18.8.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 25 mm nominal dia Pipes Metre 12.00 627.25 531.57 547.51 547.51 18.00% 6,570.12 1,182.62 6,570.12 1,182.62

111 18.13.1 Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore Each 2.00 911.90 772.80 795.98 795.98 18.00% 1,591.96 286.55 1,591.96 286.55

112 18.13.2 Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 50 to 80 mm nominal bore Each 2.00 1785.35 1513.01 1558.40 1,558.40 18.00% 3,116.80 561.02 3,116.80 561.02

113 18.17.4 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 50 mm nominal bore Each 4.00 1026.65 870.04 896.14 896.14 18.00% 3,584.56 645.22 3,584.56 645.22

114 18.18.3 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25 mm nominal bore Each 3.00 464.05 393.26 405.06 405.06 18.00% 1,215.18 218.73 1,215.18 218.73

115 18.22.2 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter Each 12.00 222.35 188.43 194.09 194.09 18.00% 2,329.08 419.23 2,329.08 419.23

116 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Per Litre 6000.00 11.00 9.32 9.60 9.60 18.00% 57,600.00 10,368.00 57,600.00 10,368.00

117 18.51.1 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore Each 1.00 798.95 677.08 697.39 697.39 18.00% 697.39 125.53 697.39 125.53

118 18.52.1 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. Each 12.00 670.45 568.18 585.22 585.22 18.00% 7,022.64 1,264.08 7,022.64 1,264.08

119 18.53.1 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal bore Each 48.00 574.30 486.69 501.30 501.30 18.00% 24,062.40 4,331.23 24,062.40 4,331.23

120 18.53A Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. Each 60.00 74.80 63.39 65.29 65.29 18.00% 3,917.40 705.13 3,917.40 705.13

121 18.77 Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof. Each 10.00 452.00 383.05 394.54 394.54 18.00% 3,945.40 710.17 3,945.40 710.17

SUB HEAD : 19.0 DRAINAGE

122 19.2.2 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : 150 mm diameter S.W. pipe Metre 50.00 1179.85 999.87 1029.87 1,029.87 18.00% 51,493.50 9,268.83 51,493.50 9,268.83

123 19.4.1.1 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 100x100 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 5.00 2707.65 2294.62 2363.46 2,363.46 18.00% 11,817.30 2,127.11 11,817.30 2,127.11

124 19.6.2 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 150 mm dia. R.C.C. pipe Metre 50.00 556.45 471.57 485.71 485.71 18.00% 24,285.50 4,371.39 24,285.50 4,371.39

125 19.6.4 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 300 mm dia. R.C.C. pipe Metre 10.00 994.30 842.63 867.91 867.91 18.00% 8,679.10 1,562.24 8,679.10 1,562.24

126 19.7.1.1 Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 7.00 12770.55 10822.50 11147.18 11,147.18 18.00% 78,030.26 14,045.45 78,030.26 14,045.45

127 19.8.1.1 Extra for depth for manholes : Size 90x80 cm With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Metre 2.00 8825.40 7479.15 7703.53 7,703.53 18.00% 15,407.06 2,773.27 15,407.06 2,773.27

128 19.32.1 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 2.00 26861.90 22764.32 23447.25 23,447.25 18.00% 46,894.50 8,441.01 46,894.50 8,441.01

SUB HEAD : 22.0 WATER PROOFING

129 22.7.1 Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. “All above operations to be done in order and as directed and specified by the Engineer-in-Charge”: With average thickness of 120 mm and minimum thickness at khurra as 65 mm. Sqm 253.00 1684.60 1427.63 1470.46 1,470.46 18.00% 372,026.38 66,964.75 372,026.38 66,964.75

Total of Scheduled Items- Civil 13,571,188.01 2,442,813.84 13,571,188.01 2,442,813.84

SCHEDULE ITEMS (Electricals)

1 1.8.1 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. Group A POINT 42.00 1166.00 988.14 988.14 988.14 18.00% 41,501.88 7,470.34 41,501.88 7,470.34

2 1.9 Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. POINT 4.00 1693.00 1434.75 1434.75 1,434.75 18.00% 5,739.00 1,033.02 5,739.00 1,033.02

3 1.10.3 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C Point 240.00 1704.00 1444.07 1444.07 1,444.07 18.00% 346,576.80 62,383.82 346,576.80 62,383.82

4 1.11 Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq¢.mm FRLS PVC insulated copper conductor single core cable etc. as required. Point 75.00 1803.00 1527.97 1527.97 1,527.97 18.00% 114,597.75 20,627.60 114,597.75 20,627.60

5 1.14.1 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire Metre 200.00 267.00 226.27 226.27 226.27 18.00% 45,254.00 8,145.72 45,254.00 8,145.72

6 1.14.2 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire Metre 1350.00 311.00 263.56 263.56 263.56 18.00% 355,806.00 64,045.08 355,806.00 64,045.08

7 1.14.3 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 4 sq. mm + 1X 4 sq. mm earth wire Metre 640.00 373.00 316.10 316.10 316.10 18.00% 202,304.00 36,414.72 202,304.00 36,414.72

8 1.14.4 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 6 sq. mm + 1X 6 sq. mm earth wire Metre 4.00 482.00 408.47 408.47 408.47 18.00% 1,633.88 294.10 1,633.88 294.10

35 1.18.2 Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. 2 Pair Metre 180.00 39.00 33.05 33.05 33.05 18.00% 5,949.00 1,070.82 5,949.00 1,070.82

36 1.19 Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required. Metre 250.00 54.00 45.76 45.76 45.76 18.00% 11,440.00 2,059.20 11,440.00 2,059.20

9 1.21.1 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 20 MM Metre 4.00 151.00 127.97 127.97 127.97 18.00% 511.88 92.14 511.88 92.14

10 1.21.2 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25 MM Metre 1200.00 168.00 142.37 142.37 142.37 18.00% 170,844.00 30,751.92 170,844.00 30,751.92

11 1.21.3 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 32 MM Metre 4.00 209.00 177.12 177.12 177.12 18.00% 708.48 127.53 708.48 127.53

12 1.21.4 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 40 MM Metre 4.00 257.00 217.80 217.80 217.80 18.00% 871.20 156.82 871.20 156.82

13 1.21.5 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 50 MM Metre 4.00 316.00 267.80 267.80 267.80 18.00% 1,071.20 192.82 1,071.20 192.82

14 1.23.6 Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. Telephone socket outlet Each 1.00 127.00 107.63 107.63 107.63 18.00% 107.63 19.37 107.63 19.37

15 1.24.1 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 A switch Each 36.00 121.00 102.54 102.54 102.54 18.00% 3,691.44 664.46 3,691.44 664.46

16 1.24.4 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 3 pin 5/6 A socket outlet Each 86.00 136.00 115.25 115.25 115.25 18.00% 9,911.50 1,784.07 9,911.50 1,784.07

17 1.24.6 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Telephone socket outlet Each 10.00 168.00 142.37 142.37 142.37 18.00% 1,423.70 256.27 1,423.70 256.27

18 1.24.7 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. TV antenna socket outlet Each 12.00 168.00 142.37 142.37 142.37 18.00% 1,708.44 307.52 1,708.44 307.52

19 1.25 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. Each 46.00 402.00 340.68 340.68 340.68 18.00% 15,671.28 2,820.83 15,671.28 2,820.83

20 1.26 Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. Each 50.00 47.00 39.83 39.83 39.83 18.00% 1,991.50 358.47 1,991.50 358.47

21 1.27.1 Supplying and fixing following size/ modules, Gl box alongwith modular base & cover plate for modular switches in recess etc. as required. 1 or 2 Module ( 75 mm x 75 mm) Each 48.00 354.00 300.00 300.00 300.00 18.00% 14,400.00 2,592.00 14,400.00 2,592.00

22 1.27.2 Supplying and fixing following size/ modules, Gl box alongwith modular base & cover plate for modular switches in recess etc. as required. 3 Module (100mmX75mm) Each 40.00 384.00 325.42 325.42 325.42 18.00% 13,016.80 2,343.02 13,016.80 2,343.02

23 1.27.3 Supplying and fixing following size/ modules, Gl box alongwith modular base & cover plate for modular switches in recess etc. as required. 4 Module (125mmX75mm) Each 14.00 401.00 339.83 339.83 339.83 18.00% 4,757.62 856.37 4,757.62 856.37

24 1.27.4 Supplying and fixing following size/ modules, Gl box alongwith modular base & cover plate for modular switches in recess etc. as required. 6 Module (200mmX75mm) Each 35.00 462.00 391.53 391.53 391.53 18.00% 13,703.55 2,466.64 13,703.55 2,466.64

25 1.27.5 Supplying and fixing following size/ modules, Gl box alongwith modular base & cover plate for modular switches in recess etc. as required. 8 Module (125mmX125mm) Each 25.00 517.00 438.14 438.14 438.14 18.00% 10,953.50 1,971.63 10,953.50 1,971.63

26 1.31 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. Each 50.00 545.00 461.86 461.86 461.86 18.00% 23,093.00 4,156.74 23,093.00 4,156.74

27 1.32 Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. Each 73.00 659.00 558.47 558.47 558.47 18.00% 40,768.31 7,338.30 40,768.31 7,338.30

28 1.33 Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. Each 90.00 104.00 88.14 88.14 88.14 18.00% 7,932.60 1,427.87 7,932.60 1,427.87

29 1.38 Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required. Each 10.00 112.00 94.92 94.92 94.92 18.00% 949.20 170.86 949.20 170.86

30 1.41 Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC _ insulated, copper conductor, single core cable and earthing etc. as required. Each 32.00 259.00 219.49 219.49 219.49 18.00% 7,023.68 1,264.26 7,023.68 1,264.26

31 1.44 Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required. Each 1.00 266.00 225.42 225.42 225.42 18.00% 225.42 40.58 225.42 40.58

32 1.45 Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required. Each 1.00 332.00 281.36 281.36 281.36 18.00% 281.36 50.64 281.36 50.64

33 1.50.1 Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Upto 450 mm sweep Each 6.00 556.00 471.19 471.19 471.19 18.00% 2,827.14 508.89 2,827.14 508.89

34 1.51 Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes. Each 6.00 260.00 220.34 220.34 220.34 18.00% 1,322.04 237.97 1,322.04 237.97

37 2.4.1 Supplying and fixing following way,horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper busbar, neutral busbar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 4 way (4 + 12), Double door, horizontal TPN DB. Each 4.00 4377.00 3709.32 3709.32 3,709.32 18.00% 14,837.28 2,670.71 14,837.28 2,670.71

38 2.5.1 Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar,din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.): 4 way (4 + 12), Double door Each 2.00 7951.00 6738.14 6738.14 6,738.14 18.00% 13,476.28 2,425.73 13,476.28 2,425.73

39 2.10.1 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with onnections, testing and commissioning etc. as required.: Single pole Each 159.00 285.00 241.53 241.53 241.53 18.00% 38,403.27 6,912.59 38,403.27 6,912.59

40 2.10.5 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with Connections, testing and commissioning etc. as required.: Triple pole and neutral Each 3.00 1301.00 1102.54 1102.54 1,102.54 18.00% 3,307.62 595.37 3,307.62 595.37

41 2.13.1 Supply and fixing following rating, four pole, 415V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40A Each 12.00 1049.00 888.98 888.98 888.98 18.00% 10,667.76 1,920.20 10,667.76 1,920.20

42 2.13.2 Supply and fixing following rating, four pole, 415V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63A Each 1.00 1115.00 944.92 944.92 944.92 18.00% 944.92 170.09 944.92 170.09

43 2.18 Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. Each 135.00 1806.00 1530.51 1530.51 1,530.51 18.00% 206,618.85 37,191.39 206,618.85 37,191.39

44 2.21 Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required. Each 6.00 315.00 266.95 266.95 266.95 18.00% 1,601.70 288.31 1,601.70 288.31

45 5.2 Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. Set 2.00 7658.00 6489.83 6489.83 6,489.83 18.00% 12,979.66 2,336.34 12,979.66 2,336.34

46 5.4 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. Set 2.00 8351.00 7077.12 7077.12 7,077.12 18.00% 14,154.24 2,547.76 14,154.24 2,547.76

47 5.6 Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. Set 2.00 15004.00 12715.25 12715.25 12,715.25 18.00% 25,430.50 4,577.49 25,430.50 4,577.49

48 5.9 Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) Metre 50.00 160.00 135.59 135.59 135.59 18.00% 6,779.50 1,220.31 6,779.50 1,220.31

49 5.10 Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required. Metre 30.00 1638.00 1388.14 1388.14 1,388.14 18.00% 41,644.20 7,495.96 41,644.20 7,495.96

50 5.15 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. Metre 120.00 287.00 243.22 243.22 243.22 18.00% 29,186.40 5,253.55 29,186.40 5,253.55

51 5.19 Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required. Metre 200.00 139.00 117.80 117.80 117.80 18.00% 23,560.00 4,240.80 23,560.00 4,240.80

52 6.2 Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required. Each 2.00 422.00 357.63 357.63 357.63 18.00% 715.26 128.75 715.26 128.75

53 6.3 Jointing copper / G.I. tape (with another copper/ G | tape, base of the finial or any other metallic object) by riveting / nut bolting/ sweating and soldering etc as required. Each 10.00 139.00 117.80 117.80 117.80 18.00% 1,178.00 212.04 1,178.00 212.04

54 6.7 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run) Metre 90.00 238.00 201.69 201.69 201.69 18.00% 18,152.10 3,267.38 18,152.10 3,267.38

55 6.8 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run) Metre 20.00 100.00 84.75 84.75 84.75 18.00% 1,695.00 305.10 1,695.00 305.10

56 10.10' Supplying and fixing cable route marker with 10 cm X 10cm X5mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required. Each 60.00 598.00 506.78 506.78 506.78 18.00% 30,406.80 5,473.22 30,406.80 5,473.22

57 1.27.6 Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required. 12 Module (200mmX150mm) Each 20.00 614.00 520.34 520.34 520.34 18.00% 10,406.80 1,873.22 10,406.80 1,873.22

58 2.14.3 Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 A Each 4.00 2866.00 2428.81 2428.81 2,428.81 18.00% 9,715.24 1,748.74 9,715.24 1,748.74

Total of Scheduled Items- Electrical 1,996,430.16 359,357.43 1,996,430.16 359,357.43

Total of Scheduled Items- (Schedule-I) 15,567,618.17 2,802,171.27 15,567,618.17 2,802,171.27

Percentage (%) above/below +/- on DSR 2023 Rates excluding GST mentioned above (to be quoted by Bidder)

Total of Schedule I excluding GST considering offered % age 15,567,618.17

Total GST 2,802,171.27

GRAND TOTAL incl. GST Schedule-I 18,369,789.44

As the %variation w.r.t total DSR Amount cell left Blank the bid is considered as Non-responsive

Construction of Transit Camp cum Field Hostel at Bidar Station under Transmission System Solar Energy Zone in Bidar (2500MW) through TBCB

Schedule-II : Non-Scheduled Items

Bidder’s Name 0 To:

Address : 0 Contract Services

0 Power Grid Corporation of India Ltd.,

0 Southern Region Transmission system -I

Kavadiguda Main Raod, Secunderabad - 500080

Sl. No. Service Number SAC Code Whether SAC in column ‘2’ is confirmed. If not indicate applicable the SAC # Rate of GST applicable ( in %) Whether rate of GST in column ‘3’ is confirmed. If not indicate applicable rate of GST # Description (Non Schedule Items) Unit Quantity Unit Rate without GST Total Amount excl. GST GST Remarks 58

A NON-SCHEDULE ITEMS: CIVIL

NS_1 Diluting & injecting chemical emulsion for anti termite 18% Diluting and injecting chemical emulsion (to be supplied under other item) for PRE-CONSTRUCTIONAL anti-termite treatment and creating a continuous chemical barrier under and around the columns pits, wall trenches, basement excavation, along the external perimeter of retaining wall, expansion joints, over top surface consolidated earth on which apron is to be laid, surroundings of pipes and conduits etc., complete as per specifications. Chlorpyriphos/ Lindane emulsifiable concentrate 20% with 1% concentration. (cost of Chlorpyriphos/ Lindane emulsifiable concentrate shall be paid separately. Basement floor slab area of the building only shall be measured for payment) Sqm 392.00 0.00 0.00

NS_2 Sunken filling with 40 mm dia pipe spout 18% Providing and placing cinder/brick bat or any light weight water absorbing materials filling to the sunk floors in toilets/kitchen sunks, well compacted carefully by hand beating to required slopes including consolidation,making hole or core to the beam/wall for providing 40mm dia PVC drain (spout pipe) pipe of required length, pipe should be fixed properly to the beam or wall with water proofing compound with cover the inlet pipe mouth with SS jali and packing with 40/20/10 mm stone aggregate with sufficent quantity. For toilet and Kitchen sunkun portions. Cum 18.00 0.00 0.00

NS_3 filling sand/crushed stone sand 18% Supplying and filling in plinth/below foundation/footpath etc with crushed stone sand / river sand under floors/below foundation/footpath etc including watering, ramming, consolidating and dressing complete. Cum 25.00 0.00 0.00

NS_4 Brick work up to plinth 18% Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (75kg/sq.cm)in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand). Note: Fly ash brick of same class confirming to relevant IS code can also be used if clay bricks of designated class are not available. Cum 47.00 0.00 0.00

NS_5 Brick work above plinth 18% Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (75kg/sq,cm) in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) Note: Fly ash brick of same class confirming to relevant IS code can also be used if clay bricks of designated class are not available. Cum 166.00 0.00 0.00

NS_6 half Brick work above plinth 18% Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (75kg/sq,cm) in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand). Note: Fly ash brick of same class confirming to relevant IS code can also be used if clay bricks of designated class are not available. Sqm 372.00 0.00 0.00

NS_7 C.I Cover with frame 18% Supply and fixing of C.I Cover with frame for manholes, septic tank, underground tank etc. 500 mm diamter C.I Cover (medium duty) the weight of the cover with frame to be not less than 58 Kg. each 2.00 0.00 0.00

NS_8 SWR pipe 110 mm 18% Providing, fixing , laying, testing & commissioning (Concealed/surface mounted or underground) uPVC SWR Rigid pipes confirming to IS 13592 Type B of PRICE/SUPREME/FINOLEX or equivalent make for drainage line including necessary fittings such as couplers, bends, tees, cross tees, cowls, 2way/3way junction of any degree,clamps, rubber packing ring, acess door etc. wherever required confirming to IS-14735, joining with adhessive solvent cement including cost of jointing materials and all other necessary fixtures, fitting, air and water tight testing of the line etc. complete at all levels. (Centre line length of completed pipe line shall be measured for payment purpose) (B) 110mm outer dia. Metre 68.00 0.00 0.00

NS_9 SWR pipe 75 mm 18% Providing, fixing , laying, testing & commissioning (Concealed/surface mounted or underground) uPVC SWR Rigid pipes confirming to IS 13592 Type B of PRICE/SUPREME/FINOLEX or equivalent make for drainage line including necessary fittings such as couplers, bends, tees, cross tees, cowls, 2way/3way junction of any degree,clamps, rubber packing ring, acess door etc. wherever required confirming to IS-14735, joining with adhessive solvent cement including cost of jointing materials and all other necessary fixtures, fitting, air and water tight testing of the line etc. complete at all levels. (Centre line length of completed pipe line shall be measured for payment purpose) (B) 75mm outer dia. Metre 80.00 0.00 0.00

NS_10 SWR Pipe 160 mm 18% Providing and fixing soil, waste and vent pipes with unplsticised rigid PVC 160mm dia pipes conforming IS 13592 Type B. all complete as directed by the Engineer in charge. Metre 4.00 0.00 0.00

NS_11 Chicken wire mesh for plaster 18% Providing & fixing chicken wire mesh 24 gauge at junctions of RCC and masonry walls including fixing in position, scaffolding etc. complete as directed by Engineer-in-charge. Sqm 38.00 0.00 0.00

NS_12 Vetrifeid wall tiles size 600X600 18% Providing and laying ist quality Vitrified wall tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to 1S:15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser, and dado laid on 12 mm thick cement mortar 1:3 (1 cement: 3 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed vitrified floor tiles polished finish of size. Size of Tile 600 x 600 mm Sqm 53.00 0.00 0.00

NS_13 Vetrifeid wall tiles size 600X600 antiskid 18% Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to 1S:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles Matt/Antiskid finish of size. Size of Tile 600 x 600 mm Sqm 9.00 0.00 0.00

NS_14 Nahani/floor Trap 18% Providing, fixing, testing and commissioning uPVC SWR self cleaning Nahani trap, plain floor trap/ Multi floor trap etc. of 110 mm dia inlet and 75 mm outlet nominal dia. including fixing PVC reducer of 110mm dia. to 75 mm dia. and jointing with adhessive solvent cement including cost of cutting and making good the walls and floors at all levels etc. complete. make:-supreme/finolex/prince or equivalent. Each 26.00 0.00 0.00

NS_15 Window SS jali for sliding 18% Providing and fixing stainless steel 304 grade mesh of average width of aperture 1.4 mm and nominal dia of wire 0.50 mm to uPVC/aluminium windows with suitable beading/clips a as per drawings and as directed by engineer in charge. The uPVC/aluminium section of windows shall be measured under relevant items. Actual area of mesh provided shall be measured for payment. Sqm 26.00 0.00 0.00

NS_16 MS sheet box for ceiling Fan 18% Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp with its top surface hacked for proper bonding, top lid shall be screwed into the M.S. sheet box . Clamp shall be made of 12mm dia M.S. bar bent to shape. Each 18.00 0.00 0.00

NS_17 wall Mixer for normal Toilets 18% Providing & Fixing CP Brass Wall mixture of Jaguar Model No. FLR-CHR-5281N or equivalent models from other specified brands with standard length bend for overhead shower. Each 9.00 0.00 0.00

NS_18 Soap Dish 18% Providing and fixing C.P. brass Soap dish Jaguar Model ACN-CHR-1131N or equivalent of approved brands including required screws, rawl plugs etc. complete. Each 12.00 0.00 0.00

NS_19 Towel Rail 18% P&F CP towel rail 600mm long, 20mm dia of Jaguar Model CPA-CHR-1111 or equivalent of other approved brands Each 12.00 0.00 0.00

NS_20 Kitchen Sink tape 18% P&F CP Brass wall mounted two in one Sink cock with regular swinging spout & operating knob on right hand side with wall flanges. 15mm Nominal Bore. The Jaguar Make model No. SOL-CHR-6347 / Parryware model No. T4635A or equivalent from other specified brands. Each 1.00 0.00 0.00

NS_21 Two way bib cock with health fucet 18% Providing and fixing CP Brass 2 way Bib cock with wall flange and Health faucet, flexible hose pipe and wall hook complete. Jaguar FLR-CHR-5041N for Bib cock & ALD-CHR-563 for health facet or equivalent model of approved brands. Each 12.00 0.00 0.00

NS_22 CPVC Ball Valve 25 mm dia 18% Providing and fixing CPVC Ball Valve 25 mm dia with lever arm conforming to SDR 11 pressure class as per ASTM D – 2846 of PRICE/SUPREME/FINOLEX or equivalent make joining with adhessive solvent cement including cost of jointing materials and all other necessary fixtures, fitting, air and water tight testing etc. complete at all levels. Each 5.00 0.00 0.00

NS_23 CPVC Ball Valve 32 mm dia 18% Providing and fixing CPVC Ball Valve 32 mm dia with lever arm conforming to SDR 11 pressure class as per ASTM D – 2846 of PRICE/SUPREME/FINOLEX or equivalent make joining with adhessive solvent cement including cost of jointing materials and all other necessary fixtures, fitting, air and water tight testing etc. complete at all levels. Each 5.00 0.00 0.00

NS_24 CPVC Ball Valve 40 mm dia 18% Providing and fixing CPVC Ball Valve 40 mm dia with lever arm conforming to SDR 11 pressure class as per ASTM D – 2846 of PRICE/SUPREME/FINOLEX or equivalent make joining with adhessive solvent cement including cost of jointing materials and all other necessary fixtures, fitting, air and water tight testing etc. complete at all levels. Each 5.00 0.00 0.00

NS_25 CPVC Ball Valve 50 mm dia 18% Providing and fixing CPVC Ball Valve 50 mm dia with lever arm conforming to SDR 11 pressure class as per ASTM D – 2846 of PRICE/SUPREME/FINOLEX or equivalent make joining with adhessive solvent cement including cost of jointing materials and all other necessary fixtures, fitting, air and water tight testing etc. complete at all levels. Each 2.00 0.00 0.00

NS_26 SS jali for nahani for toilet with cockrage trap 18% Providing and fixing 125 mm dia stainless (SS304) matt finsh steel jali (grating) with or without hole consisting four piece system with Cockroach Trap, and frame thickness 1mm & grating thickness 1.5 mm for waste pipe of floor or Nahani trap complete in all respect as per manufacturers specification and direction of Engineer-in-charge. Make : Nirali/Lipka/ Viking/Roca/Jaquar/Kohler or equivalent. Each 24.00 0.00 0.00

NS_27 40mm GI Pipe 18% Providing, Laying and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls/pedestal etc. 40 mm dia Nominal bore Metre 30.00 0.00 0.00

NS_28 50mm GI Pipe 18% Providing, Laying and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls/pedestal etc. 50 mm dia Nominal bore Metre 30.00 0.00 0.00

NS_29 WPC Frame size 65X100 mm 18% Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/Chowkhat comprising of virgin PVC polymer,calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives and fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws and resistance to spread of flame of with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. Frame Size 65 X 100 mm Note: For WPC solid door/window frames, minus 5 mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Make-Qute/HDHMR Doors-NCL/Ecoste/Ecocell/Greenpannel/DEC Industries/Jamex or equivalant specification. Metre 60.00 0.00 0.00

NS_30 WPC Door shutters 18% Providing and fixing factory made minimum 28 mm thick single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size and design/pattern comprising of virgin polymer, calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives and resistance to spread of flame of with property of being termite/borer proof, water/moisture proof and fire retardant of approved brand and fixing with stainless steel butt hinges 4 nos of size 100x58x1.9 mm with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. Make-Qute/HDHMR Doors-NCL/Ecoste/Ecocell/Greenpannel/DEC Industries/Jamex or equivalant specification. Sqm 19.00 0.00 0.00

NS_31 125 mm thick plastic sheet 18% Providing & laying 125 mm micron Separation Membrane of impermeable plastic sheeting of approved quality between RCC & PCC , all complete as per direction of Engineer-In-Charge. Sqm 375.00 0.00 0.00

NS_32 Sunken water proofing 18% Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: (i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS : 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area. Sqm 60.00 0.00 0.00

TOTAL FOR NON-SCHEDULE ITEMS: CIVIL 0.00 0.00

B NON-SCHEDULE ITEMS:ELECTRICAL

1 NS-1 18% Supply, Installation and testing complete of Philips make LED Recessed Panel Ceiling Light of panel cut size 595X595mm SQUARE model RC370BLED30S-6500G4LED60W60 or equivalent models of POWERGRID approved makes Each 30.00 0.00 0.00

2 NS-2 18% Supply, installation, testing and commissioning of LED tubelight 20W (Philips Astra Line 20-Watt LED Battern (Cool Day Light or equivalent)) complete with all accessories as required - of POWERGRID approved makes Each 10.00 0.00 0.00

3 NS-3 18% Supply, installation, testing and commissioning of LED tubelight 11W (PHILIPS 31167 11W Adjustable Mirror Light) or equivalent) complete with all accessories as required - of POWERGRID approved makes Each 15.00 0.00 0.00

4 NS-4 18% Supply, installation, testing and commissioning of bulk head fitting Complete with all accessories 10 Watt LED lamp as required ; make as per TS Each 20.00 0.00 0.00

5 NS-5 18% Supply, installation, testing and commissioning of wall mounted 12W LED Bulb (Philips Stellar Bright 12 Watt LED Bulb, Base B22 (Cool Day Light) or equivalent) POWERGRID approved makes with all accessories inclusive of angular holder etc.as per the direction of engineer-in-charge Each 1.00 0.00 0.00

6 NS-6 18% Supplying fitting and fixing 250 mm dia exhaut fan with plastic body and blade, self closing louvers in the fan, to provide off mode protection against birds etc. inclusive of all taxes royalty etc. all complete as per specification and direction of E/I. (WITH CEILING ROSE) Each 14.00 0.00 0.00

7 NS-7 18% Supplying fitting and fixing 1400 mm sweep ceilling fan high quality & high speed, heavy duty ,(approved make) inclusive of all taxes royalty etc. all complete as per specification and direction of E/I. Crompton/CGL/BAjaj/Havells/Usha/Philips makes Each 25.00 0.00 0.00

8 NS-8 18% Supplying fitting and fixing 1200 mm sweep ceilling fan high quality & high speed, heavy duty ,(approved make) inclusive of all taxes royalty etc. all complete as per specification and direction of E/I. Crompton/CGL/BAjaj/Havells/Usha/Philips makes Each 11.00 0.00 0.00

9 NS-9 18% 2mm CRCA Indoor Panel alongwith 1 No. 250A MCCB 4P 36kA with Extended Handle & Spreader for Incoming and 3 Nos. 125A MCCB 4P 36kA with Extended Handle,Spreader forr outgoing consisting of suitable rating of Alu Busbar. This also includes supply and installation of 3-phase energy meter Each 1.00 0.00 0.00

10 NS-10 18% Supply & Installation of Geyser of minimum 3star and above with 15llts capacity of approved make by engineer-in-charge Each 14.00 0.00 0.00

12 NS-12 18% Supplying, installation, testing and commissioning of following sizes and core PVC /XLPE insulated PVC sheathed ,heavy duty, armoured electrical cable with aluminium conductor for working voltage upto and including 1100 volts (Powergrid Approved make cables) 70sq. mm , 3.5 core Metre 100.00 0.00 0.00

13 NS-13 18% Supplying, installation, testing and commissioning of following sizes and core PVC /XLPE insulated PVC sheathed ,heavy duty, armoured electrical cable with aluminium conductor for working voltage upto and including 1100 volts(Powergrid Approved make cables) 4Cx16 Sq-mm Metre 360.00 0.00 0.00

14 NS-14 18% Supply, Installation, testing and commissioning of 1.5 Ton Invertor model All weather (Hot & cold) Split AC(copper condensor ) with minimum 3 star rating and above. Scope of work including installation of indoor and outdoor units, laying of AC pipes in wall/PVC conduit upto outdoor unit and drain pipe. Fixing of Outdoor unit with suitable support fixure/frame etc all in complete respect as per directions of Engineer In-Charge. Each 17.00 0.00 0.00

15 NS-15 18% Supply and laying/installation of Additional AC duct pipes and drain pipe in wall /Recessed PVC conduit as per the instructions of Engineer-in-charge FEET 235.00 0.00 0.00

16 NS-16 18% Supply and installation of decorative wall mounted LED Night lamp fitting with lamp Philips make Philips 31434 Muziris Laminar Wall Lamp or equivalant as approved by the Engineer-in-charge Each 14.00 0.00 0.00

17 NS-17 18% Supply installation, testing and commissioning of street light fixture type Sl-L1 as per TS (45W) (Phillips, Bajaj, Havells, Insta, equivalent) (With all required accessories for fixing and earthing) Each 10.00 0.00 0.00

18 NS-18 18% Supply installation, testing and commissioning of Lighting Fixture: Type SL-D1 as per TS (30W) Post Top Lighting Fixture (With all required accessories for fixing, termination and earthing) as per TS (Phillips, Bajaj, Havells, Insta, equivalent) Each 15.00 0.00 0.00

19 NS-19 18% Supply installation, testing and commissioning of Supply installation, testing and commissioning of GI Pole 6 Mtr (With all required accessories for Termination, fixing and earthing) as per TS (SL-L1) Each 10.00 0.00 0.00

20 NS-20 18% Supply installation, testing and commissioning of Supply of D1 Pole 4 Mtr (With all required accessories for fixing and earthing) as per TS Each 15.00 0.00 0.00

21 NS-21 18% Supply Installation testing and commissioning of Sub Lighting Panel Incomers: 4 pole 32A TPN MCB suitable for 415V AC supply Outgoings: 8 nos. terminal blocks suitable for cable upto 16 sq. mm cable. Mounting: Suitable for Outdoor applications with Loop in and Loop out facility. Each 2.00 0.00 0.00

22 NS-22 18% Supply, installation, testing and commissioning of 1.1kV 2C x 6 Sq-mm PVC cable Metre 500.00 0.00 0.00

23 NS-23 18% Supplying of 230 V exhaust fan complete with louver/shutter and all accessories as required of 200 mm sweep 1300-1400 rpm Each 1.00 0.00 0.00

24 NS-24 18% Supply of 20w LED batten complete with all accessories of make philips/havells/syska or equivalent Each 32.00 0.00 0.00

25 NS-25 18% Supply 380-450 mm, 1400 RPM exhaust fans complete with brackets,blades and all other accessories and fittings,confirming to relevant IS and suitable for operation on 230 V single phase AC supply Each 6.00 0.00 0.00

26 NS-26 18% Supply of louvers shutter for exhaust fan Each 6.00 0.00 0.00

27 NS-27 18% SUPPLY AND INSTALLATION of 100Watt(waterproof) LED flood light of make Philps/Bajaj or equivalent as approved by Engg in charge Each 6.00 0.00 0.00

TOTAL FOR NON-SCHEDULE ITEMS: (Electrical) 0.00 0.00

Total of Non-Schedule Items (Schedule - II) 0.00 0.00 Sheet OK

GRAND Total incl. GST of Non-Schedule Items (Schedule - II) 0.00 Sheet OK

As all the line items are Left Blank the bid is considered as Non-responsive

Construction of Transit Camp cum Field Hostel at Bidar Station under Transmission System Solar Energy Zone in Bidar (2500MW) through TBCB

(GRAND SUMMARY)

Bidder’s Name and Address (Sole Bidder) : To:

Name : 0 Contract Services

Address : 0 Power Grid Corporation of India Ltd.,

0 Southern Region Transmission system -I

0 Kavadiguda Main Raod,

Secunderabad - 500080

Sl. No. Description Total Price (INR)

1.1 TOTAL SCHEDULE NO. I

Supply & Installation Charges- Schedule Civil & Electrical Items for Construction of Transit Camp cum Field Hostel at Bidar Station under Transmission System Solar Energy Zone in Bidar (2500MW) through TBCB NOT QUOTED

1.2 TOTAL SCHEDULE NO. II

Supply & Installation Charges- Non-Schedule Civil & Electrical Items for Construction of Transit Camp cum Field Hostel at Bidar Station under Transmission System Solar Energy Zone in Bidar (2500MW) through TBCB NOT QUOTED

I Total of Service/Installation Charge (ITEMS TAB: Item 01 INSTALLATION FOR DCB (INR) : SRM ATB for BID PRICE SUMMARY Statement ) Non-responsive Bid

GST on Schedule-I 2,802,171.27

GST on Schedule-II 0.00

Total GST for BID PRICE SUMMARY Statement ) Non-responsive Bid

III GRAND TOTAL Non-responsive Bid

Date : 0 Printed Name : 0.00

Place : 0 Designation : 0.00

Specification No: Ref: SR-I/C&M/WC-4538/2026 (SR1/T/W-CIVIL/DOM/B00/26/00536) Rfx no.: 5002005032 Bid Form 2nd Envelope

BID FORM (Second Envelope)

Bid Proposal Ref. No.

Contract Services

Power Grid Corporation of India Ltd.,

Southern Region Transmission System-I

Name of Contract : Construction of Transit Camp cum Field Hostel at Bidar Station under Transmission System Solar Energy Zone in Bidar (2500MW) through TBCB

Dear Ladies and/or Gentlemen,

1.0 In continuation of First Envelope of our Bid, we hereby submit the Second Envelope of the Bid, both of which shall be read together and in conjunction with each other, and shall be construed as an integral part of our Bid. Accordingly, we the undersigned, offer to undertake the above-named package in full conformity with the said Bidding Documents for the sum of Rs. Non-responsive Bid /- only or such other sums as may be determined in accordance with the terms and conditions of the Bidding Documents. In continuation of First Envelope of our Bid, we hereby submit the Second Envelope of the Bid, both of which shall be read together and in conjunction with each other, and shall be construed as an integral part of our Bid. Accordingly, we the undersigned, offer to undertake the above-named package in full conformity with the said Bidding Documents for the sum of Rs. /- only or such other sums as may be determined in accordance with the terms and conditions of the Bidding Documents. Non-responsive Bid

Sch-1 Schedules Items as per DSR 2021 excluding GST

Sch-2 Non-Scheduled Items

Sch-3 Grand Summary

2.3 We declare that as specified in Clause 4.6, ITB, Vol.-IA of the Bidding Documents, the prices of all the Services to be supplied under this contract shall be FIRM and doesnot subject to any price adjustment as per relevant clauses in bidding document.

3.0 We confirm that except as otherwise specifically provided our Bid Prices in this Second Envelope include all taxes, duties, levies and charges as may be assessed on us/our Associate (applicable for Foreign Bidder), our Sub-Contractor/Sub-Vendor or their employees by all municipal, state or national government authorities in connection with the Facilities, in and outside of India.

3.1 100% of applicable Taxes and Duties i.e GST , which are payable by the Employer under the Contract, shall be reimbursed by the Employer on production of satisfactory documentary evidence by the Contractor in accordance with the provisions of the Bidding Documents.

3.3 We confirm that we have also registered/we shall also get registered in the GST Network with a GSTIN, in all the states where the project is located and the states from which we shall make our supply of goods.

4.0 # (For Joint Venture only) We, the partners of Joint Venture submitting this bid, do agree and confirm that in case of Award of Contract on the Joint Venture, we shall be jointly and severally liable and responsible for the execution of the Contract in accordance with Contract terms and conditions.

5.0 We, hereby, declare that only the persons or firms interested in this proposal as principals are named here and that no other persons or firms other than those mentioned herein have any interest in this proposal or in the Contract to be entered into, if the award is made on us, that this proposal is made without any connection with any other person, firm or party likewise submitting a proposal is in all respects for and in good faith, without collusion or fraud.

Thanking you, we remain,

Yours faithfully,

For and on behalf of

Date : 00-Jan-00 Printed Name : 0

Place : 0 Designation : 0

Please provide additional information of the Bidder

Business Address :

Country of Incorporation :

State/Province to be indicated :

Name of Principal Officer :

Address of Principal Officer :

Note: Bidders may note that no prescribed proforma has been enclosed for Attachment 2 : Power of Attorney. Bidders may use their own proforma for furnishing the required information with the bid.