REPAIRS OF STEEL FURNITURE INCLUDING

Amount

Repair to Almirah large steel with replacement of following items(components) with new, material and complete and all as specified ( Drg No:FD-1031 & 67(M)):-

Shelf made out of PGI sheet one mm thick

All as per srl item No 1.01 but fixing only loose/hanging shelves.

CP handles with washers

Locks brass with duplicate keys. (The locks shall be of GI with six brass levers, (As per sample)

Legs made out of 1mm thick PGI sheet

Base made out of PGI sheet 20 gauge

MS hinges 75mm long (as approved by GE) by welding

MS round bar (locking rod) 10mm dia with brass bush fitting

M&L for scrubbing down all old paint, preparation of surface with denting where required, applying putty etc and spray painting with two coats of synthetic enameled paint (Steel Grey) shade over a coat of metal primer, complete all as specified and directed.

Repair to Almirah Medium steel with replacement of following items(components) with new, material and complete and all as specified ( FD-67 & 1032/1031):-

Shelf made out of PGI sheet 1mm thick

All as per srl item No 2.01 but fixing only loose/hanging shelves.

CP handles with washers etc

Locks brass with duplicate keys. (The locks shall be of GI with six brass levers, (As per sample)

Leg made out of 1mm thick PGI sheet

Base made out of PGI sheet 20 gauge

MS hinges 75mm long (as approved by GE) by welding

M&L for scrubbing down all old paint, preparation of surface with denting where required, applying putty etc and spray painting with two coats of synthetic enameled paint (Steel Grey) shade over a coat of metal primer, complete all as specified and directed.

Repair to locker steel with replacement of following items (components) with new, material and complete and all as specified ( FD- 243 & 257):-

Shelf made out of PGI sheet 1 mm and fixing with rivetting on locker steel

All as per item srl No 3.01 but fixing only loose/hanging shutter.

CP handles 100mm long.

CP hasp & staples 75mm long

MS hinge 75mm long (as approved by GE) by welding

Leg made out of 1mm thick PGI sheet

Base/shelves made out of PGI sheet 1 mm

M&L for scrubbing down all old paint, preparation of surface with denting where required, applying putty etc and spray painting with two coats of synthetic enameled paint (Steel Grey) shade over a coat of metal primer, complete all as specified and directed.

Repair to table office clerk steel with replacement of following items (components) with new, material and labour complete and all as specified ( FD-84 (M),FD-1004):-

Table top size 4’x2’-6” made out of 18mm thick HDHMR Board (high density high moisture resistance) with glossy matt finish 6mm thick teak wood beading alround the top duly French polished.

Drawer with 1mm thick PGI sheet (with, denting/welding or any other means to enable all the three drawer to work smoothly).

Locks with new GI locks with brass lever with duplicate keys.

PVC shoes

M&L for scrubbing down all old paint, preparation of surface and spray painting with two coats of synthetic enameled paint (Steel Grey) shade over a coat of metal primer, complete all as specified and directed.

Repair to Teapoy verandah steel with replacement of following items (components) with new, material and labour complete and all as specified ( FD-383, 255):-

Top with new top of size 3'X1.6' made out of 18 mm thick HDHMR Board(high density high moisture resistance) with glossy matt finish 6mm thick teak wood beading alround the top duly French polished.

PVC shoe

M&L for scrubbing down all old paint, preparation of surface and spray painting with two coats of synthetic enameled paint (Steel Grey) shade over a coat of metal primer, complete all as specified and directed.

Repair to table office officer steel with replacement of following items (components) with new, material and labour complete and all as specified (FD-84 (M), FD-1003):-

Top size 5’x3’ made out of 18mm thick HDHMR Board (high density high moisture resistance) with glossy matt finish 6mm thick teak wood beading alround the top duly French polished.

Drawer with 1mm thick PGI sheet including the repairing the sliding surface of the drawer by smoothing the portion, denting/welding or any other means to enable all the three drawers to work smoothly

Locks with new brass lever locks with duplicate keys.

PVC shoe

Recessed handle

M&L for scrubbing down all old paint, preparation of surface and spray painting with two coats of synthetic enameled paint (Steel Grey) shade over a coat of metal primer, complete all as specified and directed.

Repair to table 3'x2' steel with replacement of following items (components) with new, material and labour complete and all as specified (FD-1008):-

Top size 3'x2' made out of 18mm thick HDHMR Board(high density high moisture resistance) with glossy matt finish 6mm thick teak wood beading alround the top duly French polished.

Drawer with 1mm thick PGI sheet including the repairing the sliding surface of the drawer by smoothing the portion, denting/welding or any other means to enable all the drawers to work smoothly

GI lock with brass lever with duplicate keys.

PVC shoe

Handle

M&L for scrubbing down all old paint, preparation of surface and spray painting with two coats of synthetic enameled paint (Steel Grey) shade over a coat of metal primer, complete all as specified and directed.

Repair to table 3'x2' steel with out drawer with replacement of following items (components) with new, material and labour complete and all as specified (FD-1007):-

Table top with new top size 3'x2' made out of 18mm thick HDHMR Board(high density high moisture resistance) with glossy matt finish 6mm thick teak wood beading alround the top duly French polished.

PVC shoe

M&L for scrubbing down all old paint, preparation of surface and spray painting with two coats of synthetic enameled paint (Steel Grey) shade over a coat of metal primer, complete all as specified and directed.

Repair to CHAIR COMPUTER with replacement of following items (components) with new, material and labour complete and all as specified (FD/E6/MAP/01):-

Removing existing u/s seat foam and tapestry cloth and S & F new seat with the provision of plywood commercial 12mm, foam 3" and tapestry cloth not less than 350/- mtr all as per drg

Back with the new foam 2" and tapestry cloth (not less than 350/- mtr)

PVC moulded back frame with screws and PVC lipping

Hydraulic system (as per sample)

Castor wheel (as per sample)

PVC hand rest (as per sample)

Repair to Chair Revolving (Executive) with replacement of following items (components) with new, material and labour complete and all as specified (TP):-

Seat with plywood commercial 12mm, foam 3" and tapestry cloth not less than 350/- mtr

Back with foam 2" and tapestry cloth not less than 350/- mtr

Hydraulic system (as per sample)

Castor wheel (as per sample)

PVC hand rest (as per sample)

Repair to table dinning ORs aluminum top with replacement of following items (components) with new, material and labour complete and all as specified ( FD-165 ):-

Top made out of 18mm thick BWR plywood commercial covered with 0.88 mm thick aluminium sheet with 5” over lapping with s/s screws

MS square 25mm 16 gauge in frame including stiffener duly welded.

M&L for welding upto 2.5mm long welding to steel frame with electric welding and smoothing off the welding portion, scrubbing down all old paint, preparation of surface and spray painting with two coats of synthetic enameled paint (Steel Grey) shade over a coat of metal primer, complete all as specified and directed.

Repair to chair steel tubular with arms with replacement of following items (components) with new, material and labour complete and all as specified ( FD-75 ):-

Seat made out of sheesham wood duly polished and canned with 2mm wide cane of make PREMIER, (fixed with nuts and bolts) including welding MS flat 25 x 3mm 02 Nos (front & back) beneath the seat

All as per item No 12.01 but back of chair tubular steel with arms.

PVC shoe/PVC Cap

M&L for scrubbing down all old paint, preparation of surface and spray painting with two coats of synthetic enameled paint (Steel Grey) shade over a coat of metal primer, complete all as specified and directed.

Repair to Table 3'x3' Steel with replacement of following items (components) with new, material and labour complete and all as specified ( FD-1009 ):-

Table top with new top size 3'x3' made out of 18mm thick HDHMR Board(high density high moisture resistance) with glossy matt finish 6mm thick teak wood beading alround the top duly French polished.

PVC shoe

M&L for scrubbing down all old paint, preparation of surface and spray painting with two coats of synthetic enameled paint (Steel Grey) shade over a coat of metal primer, complete all as specified and directed.

Repair to BOOK CASE STEEL with replacement of following items (components) with new, material and labour complete and all as specified ( FD-1028 ):-

Glass shutters made out of 1mm thick MS sheet with glass 3mm thick

CP handles 100mm

Locks brass lever

Leg made out of 1mm thick MS sheet

M&L for scrubbing down all old paint, preparation of surface with denting where required, applying putty etc and spray painting with two coats of synthetic enameled paint (Steel Grey) shade over a coat of metal primer, complete all as specified and directed.

Repair to Chair CBA Steel Cushioned with replacement of following items (components) with new, material and labour complete and all as specified ( HFD-2045 ):-

Seat (U foam 3" thick 32 density. Make : Sleepwell/Kurlon) covered with tapestry cloth of market rate not less than Rs. 350/- per mtr

Back (U foam 3" thick 32 density. Make : Sleepwell/Kurlon) covered with tapestry cloth of market rate not less than Rs. 350/- per mtr

Hand rest made of black intergal skin polyurethane reinforced with MS insert

Repair to Chair Writing Steel Cushioned with replacement of following items (components) with new, material and labour complete and all as specified ( FD/E6/ MAP/12 ):-

Seat (U foam 3" thick 32 density. Make : Sleepwell/Kurlon) covered with tapestry cloth of market rate not less than Rs. 350/- per mtr

Back (U foam 3" thick 32 density. Make : Sleepwell/Kurlon) covered with tapestry cloth of market rate not less than Rs. 350/- per mtr

Hand rest made of black intergal skin polyurethane reinforced with MS insert

Repair to TABLE COMPUTER 1200X600X760MM with replacement of following items (components) with new, material and labour complete and all as specified ( FD/E6/MAP/03 & TP, FD/E6/MAP/03 & TP ):-

Top of size 1200x600x18mm with PVC beading

Bottom shelf

Shelf for key board with 2 Nos sliding channel

Drawer 18mm thick with provision of CP Handle

Castor wheel (as per sample)

Repair to Desk with replacement of following items (components) with new, material and labour complete and all as specified ( FD-107 (M) ):-

Box made out of prelaminated particle board18mm extrerior quality alround the 4mm TW beading over all size 700x530x840mm

MS conduit pipe 25mmx1mtr dia duly welded (as per sample)

Rubber bush (as per sample)

All exposed steel surfaces to be painted with two coats of synthetic enamel paint to the required finish after preparation of surface by sand papering, removing of old filth to smooth surface complete all as specified and directed.

Repair to Rack Adjustable 6 Tier with replacement of following items (components) with new, material and labour complete and all as specified (FD-1038 ):-

Shelf made out of 1.00mm thick PBI sheet

Spray painting with two coats of synthetic enamal paint steel gray over a coat of metal primer after scrubbing all the old paint preparation of surface & denting where required, applying putty etc. complete all as specified and directed.

Repair to Bed Hard Steel with replacement of following items (components) with new, material and labour complete and all as specified ( FD/E6/MAP/8® ):-

Plywood top 12mm thick BWP Grade IS-710 both side commercial. Make of plywwod: Century Ply /Green ply/Kit ply)

Head board 18mm thick PLPB exterier grade

Foot hoard 18mm thick PLPB exterier grade

Spray painting with two coats of synthetic enamal paint Black over a coat of metal primer after scrubbing all the old paint preparation of surface complete all as specified and directed.

Repair to Charpoy IP Hard Top with replacement of following items (components) with new, material and labour complete and all as specified ( FD/MAP-II/01):-

Top 12mm thick BWP Grade IS-710 both side commercial. (Make of plywwod : Century Ply /Green ply/Kit ply)

Spray painting with two coats of synthetic enamal paint Black over a coat of metal primer after scrubbing all the old paint preparation of surface complete all as specified and directed.

Repair to Charpoy Folding IP Hard Top with replacement of following items (components) with new, material and labour complete and all as specified ( FD-388® ):-

Top 8mm thick BWP Grade IS-710 both side commercial. (Make of plywwod : Century Ply /Green ply/Kit ply)

Spray painting with two coats of synthetic enamal paint Black over a coat of metal primer after scrubbing all the old paint preparation of surface complete all as specified and directed.

Deduct Total amount of SCH 'A' SECTION-II (SCH OF CREDIT) Rs 34806.50 (to be deducted from Schedule ‘A’ (BOQ) to arrive at the Contract Sum)

vivek and co

M/S NEW SUBBERWAL FURNISHERS

M/S INDAN FURNITURE MART