SPECIAL REPAIRS TO BLDG NO. D-2 (OFFICERS MESS) AT DALAPCHAND UNDER GE 867 EWS

Amount

S&F pre-painted galvalume aluminium zinc coating GI based corrugated (Trepezium or tiled pattern etc.,) steel sheet 0.50 mm thick (with 0.45 mm BMT) of any colour having tensile strength of 550 Mpa (pitch of corrugation shall be 200mm to 250mm and crest shall be 28mm to 32mm) as in roof covering/ cladding to wall fixed with self tapping screws including taking down existing steel sheeting of any type complete all as specified and directed by Engineer-in-Charge.

S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick (with 0.45 mm BMT) of any colour having tensile strength of 550 Mpa as in roof covering, eaves board, ridges, hips,valley gutters, drip and straight flashing cladding to wall etc, fixed with self tapping screws including taking down existing steel sheeting of any type complete all as specified and directed by Engineer-in-Charge. Make for Item No. 1&2: TATA BLUESLOPPE/ LLYODS /JMBS/ EVEREST INDUSTRIES LTD/CRIL/JSW STEEL or equivalent as approved by GE.

S&F 1.25mm thick Mild steel sheet eaves gutters, 150mm dia, galvanised class 3, half round with rounded edges including taking down existing eaves gutters complete all as directed by Engr-in-Charge. NOTE: MS brackets shall be measured and paid seperately.

S&F Mild steel sheet Drop ends (for spigot or socket ends) or nozzle galvanised with grade of zinc coating 350, thickness of sheet 1.25mm & 150mm dia complete all as specified and directed by Engineer-in-Charge.

S&F Mild steel sheet stop ends (for spigot or socket ends) galvanised with grade of zinc coating 350, thickness of sheet 1.25mm & 150mm dia complete all as specified and directed by Engineer-in-Charge.

M&L Mild steel work such as bands, straps, clamps and hold fasts, support for rain water pipes, gutters etc., of Fe-290 Gde E-165 all as specified and directed by Engr-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engineer-in-Charge.

S&F Fe 410-W (Gde-E- 250) quality-A Rolled steel sections, roof trusses, framed trussed, purlins, crane gantries, rails and fastening and heavy brackets framing (Beam, tee, angle channel or flat section) incl distance pieces, cleats, nut and bolts complete all as specified and directed by Engineer-in-charge.

S&F Mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290, Gde E-165 all as specified and directed.

M&L for factory made precast cement block masonry with solid blocks made of Plain cement concrete 1:3:6 mix type C1 (using 20 mm graded stone aggregate) exceeding 10cm width and setting in cement mortar 1:6 including demolition of existing block masonry complete all as specified and directed by Engineer-in-charge. Make : Shankar Saw Mills/Sangam Prefeb Products or equivalent make as approved by GE.

M&L for reinforced cement concrete 1:2:4 mix, type B1 (using 20 mm graded stone aggregate) as in slabs, shelves and the like supported on walls/beams including demolition of existing RCC and removing rubbish off the premises all as specified and directed by Engineer-in-Charge. Note: Formwork and reinforcement shall be measured and paid seperately.

M&L for reinforced cement concrete 1:2:4 mix, type B1 (using 20 mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels exceeding 1.5 m span, bands etc., including demolition of existing RCC and removing rubbish off the premises all as specified and directed by Engineer-in-Charge. Note: Formwork and reinforcement shall be measured and paid seperately.

Use and removal of steel formwork to sides and soffits of floor or roof beams, bands, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc., for rough finished surfaces of concrete flat all as specified and directed by Engineer-in-Charge.

M&L for Mild steel deformed TMT bars 10mm dia and above as in reinforcement to concrete cut to length bent to shape required including cranking bending and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as directed by Engr-in-charge.

M&L for Mild steel deformed TMT bars 8mm dia as in reinforcement to concrete cut to length bent to shape required including cranking bending and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as directed by Engr-in-charge.

M&Lfor Mild steel deformed TMT bars 5mm dia and over up to and including 10 mm dia as in stirrups, spacers and binders , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with and including mild steel wire (annealed) not less than 0.9mm dia all as specified.

M&L for rendering 15 mm thick on brickwork or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement including taking down cement plaster on brick or stone masonry surfaces of walls etc., including raking out joints, hacking for key, scrubbing down with water etc., and removing rubbish off the premises complete all as specified and directed by Engr-in-charge.

M&L for rendering 15 mm thick on brickwork or concrete surfaces in cement mortar 1:4 finished fair and even including waterproofing compound @ 3% by weight of cement as per manufacturer's instructions including taking down cement plaster on brick or stone masonry surfaces of walls etc., including raking out joints, hacking for key, scrubbing down with water etc., and removing rubbish off the premises complete all as specified and directed by Engr-in-charge.

M&L for rendering 15 mm thick on brickwork or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge.

M&L for rendering 15 mm thick on brickwork or concrete surfaces in cement mortar 1:4 finished fair and even including waterproofing compound @ 3% by weight of cement as per manufacturer's instructions complete all as specified and directed by Engr-in-charge.

M&L preparing new plastered surfaces of walls and applying two coats of distemper oil emulsion over one coat of primer over thin layer of wall care putty (Birla white/Berger/Asian) complete all as specified and as directed by Engineer-in-Charge. Make: ASIAN/SHALIMAR/BERGER/ JENSON & NICHOLSON/IEL

M&L for preparing new plastered surfaces of walls and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces on external walls complete all as specified and directed by Engineer-in-Charge. Make: APEX of ASIAN or equivalent in JENSON & NICHOLSON/ BERGER/ SHALIMAR

M&L for 10mm thick vetrified ceramic tiles of light shade (square/rectangular) polished area of each tile not exceeding 0.36 sqm, in floors etc., jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles laid on and including 15mm thick screed bed in cement mortar 1:6 including dismantling existing tiles and removing rubbish off the premises complete all as specified and directed by Engr-in-charge.

M&L for 10mm thick vetrified ceramic tiles of light shade (square/rectangular) polished area of each tile not exceeding 0.36 sqm, in skirting etc., jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles laid on and including 10mm thick rendering in cement mortar 1:4 including dismantling existing tiles and removing rubbish off the premises complete all as specified and directed by Engr-in-charge. Make for Item No 23 & 24: NITCO/ SOMANY/ ASIAN / JOHNSON/ORIENT

M&L for 17 to 20mm thick Granite slab of any type and colour machine cut in steps, jambs, pillars, window cills, cooking platform etc., bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding, polishing and rounding exposed edges complete laid over and including 20 mm thick rendering in cement mortar 1:6 including dismantling existing stone slabs and removing rubbish off the premises complete all as specified and directed by Engr-in-charge.

M&L 75 mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregate) in plinth protection/path laid in alternative bays finished even and smooth without using extra cement including demolition of existing concrete and removing rubbish off the premises complete all as specified and directed by Engineer-in-Charge.

M&L for PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) as in surface channels, drains including fair finishing inner surface of drain or channel using extra cement, including forms, moulds, mitred/ stopped ends etc., including demolition of existing concrete and removing rubbish off the premises complete all as specified and directed.

M&L for second class hard wood clean sawn scantling, unframed and fixed including taking down existing scantling complete all as specified and as directed by Engineer-in-Charge. WOOD: Sal/Kalasiris/Chaplash/Hollock/Bijasal

M&L for false ceiling with light weight PVC hollow section panels made of 1mm thick PVC sheet and overall thickness of panel minimum 7mm and 200mm wide strips of plain colour fixed in and including GI frame work of size 605 x 605 mm, for seamless celing comprising of GI perimeter chanel 0.55mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including taking down existing false ceiling complete all as specified and as directed by Engineer-in-charge. MAKE: Rajshree plast wood/Sintex/Nandi or equivalent as approved by GE.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 sqm each, complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.5 Sqm and not exceeding 4 sqm each, complete all as specified and as directed.

S&F powder coated (min thickness of Powder coateing not less than 50 micron) aluminium frame for partitions, doors, windows, ventilators with one or more rebates, grills including joining cleat for fixing etc., complete all as specified and dierected by Engr-in-Charge.

S&F powder coated (min thickness of Powder coateing not less than 50 micron) aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading, screws etc., as per manufacturer's instructions complete all as specified and directed.

S&F powder coated (min thickness of Powder coateing not less than 50 micron) aluminium window and ventilator shutters, fixed type without sash bar, almn section weighing 0.55 kg/m incuding necessary joining cleats, glazing clips, rubber packing, anodisied aluminum snap beading, screws etc, as per manufacturer's instructions complete all as specified and directed. Make for Item No. 32 to 34: JINDAL/INDALCO/HINDALCO

S & F 4mm thick sheet glass ordinary quality fixed in aluminium joinery and necessary clips/nut bolts area not exceeding 0.5Sqm in each pane complete all as directed by Engr-in-Charge.

S & F 5.5mm thick sheet glass ordinary quality fixed in aluminium joinery and necessary clips/nut bolts area exceeding 0.5Sqm in each pane complete all as directed by Engr-in-Charge. Make for Item No. 35&36:- TRIVENI/ SAINT GOBAIN/ MODIGUARD/ATUL/ HINDUSTAN or equivalent as approved by GE

S & F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples or wooden beeds all as specified and directed.

S&F Brass Mortice lock, vertical type, size 100 mm, 4 levers with keys in duplicate complete all as specified and directed. Make:- GODREJ/LINC or equivalent as approved by GE.

S & F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as directed by Engr-in-charge. Make:- UNIVERSAL/ DYNA/ HARDWIN/ EVERITE

M&L for 9mm thick prelaminated particle board, interior grade, prelaminated on both sides with choice lamination fixed with glazing clips in aluminium frame work complete all as directed by Engr-in-charge. Make:- Green ply/Kitply/Century/National/Swastik/ Ecoboard/Alishan/ Marino/ Archid/Novapan or equivalent as approved by GE.

S&F 150mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, all as specified and directed.

S&F 150 mm long Aluminium anodised barrel tower bolts of extruded aluminium section all as specified and directed.

S&F 300mm long aluminium alloy anodised sliding door bolts with hasp & staple (bolt type) and fixing clip of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy all as specified and directed. Make for Item No. 41 to 43: - CROWN/ CLASSIC/ JYOTHI/ AMIT/ MOWJEE

S & F in repairs Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples or wooden beeds all as specified and directed.

S&F in repairs brass hat and coat hooks, solid body, 175mm to 250mm all as specified and directed.

S&F in repairs decorative type drapery rod (curtain rods) of 20mm dia powder coated with fixing brackets, and knobs etc., complete all as directed by Engineer-in-Charge. MAKE: VISTA or equivalent in CROWN/ CLASSIC/ JYOTHI/ AMIT/ MOWJEE

M&L preparing old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

M&L preparing old painted steel and iron surfaces of any description over 10 cm width or girth including and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

M&L Preparing new or previously un treated surfaces of wood and wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer all as specified and directed.

M&L Preparing new or previously un treated surfaces of steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer all as specified and directed. Make for Item No. 47 to 50: ASIAN/ SHALIMAR/ BERGER/JENSON&NICHOLSON/IEL

M&L prepring surfaces of wood and wood based materials, new or old of any description, not otherwise described and treated with one coat of creosote oil complete all as specified and directed by Engineer-in-Charge.

S&F Vitreous china wash down water closet pan (pedestal pattern) white, excluding flushing cistern and flush pipe but including Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, including taking down existing unserviceable/broken EWC complete all as specified and directed Engr-in-Charge. Make: HINDWARE / NEYCER/ PARRYWARE / CERA

S&F PVC valveless, symphonic action type, flushing cistern 10ltr capacity, low level, white with inlet ball valve float and handle along with suitable flush pipe/bend including brackets fixed in repairs complete all as directed by Engr-in-Charge. Make: PARRY WARE (SLIMLINE)/ COMMANDER/ HINDWARE

S&F Vitreous China wash basin, white, flat back, of size 450 x 300 mm, with pedasal excluding taps, waste chain and plug and porcelain stopper but including brackets and 32mm dia PTMTwaste fitting, and PVC waste pipe including taking down existing unserviceable/broken wash hand basin all as specified and directed by Engr-in-Charge. Make: HINDWARE / NEYCER/ PARRYWARE / CERA

S&F Pillar taps fancy type 15 mm bore, cast copper alloy, chromium plated with crown or capstan head screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks & fly-nuts, screwed for iron pipe, fixed in repairs, all as specified and directed by Engr-in-Charge. Make: SEIKO/RYBO/SPECTRUM/ NMC/L&K/ESSCO (DELUXE)

S&F in repairs PVC connection pipe 15mm dia, 450mm long with PTMT check nuts and washer on both ends complete all as directed by Engr-in-Charge. Make:- PRAYAG/POLYTUFF or equivalent as approved by GE.

S&F in repairs Stop/angle valves 15 mm bore, cast copper alloy chromium plated screwed down high pressure, with crown or capstan head, concealed type with long shank ang cup screwed both ends for iron pipe or for unions all as specified and directed by Engr-in-Charge. Make: SEIKO/RYBO/SPECTRUM/ NMC/L&K/ESSCO (DELUXE)

S&F in repair brass cromium plated toilet paper holder box type all as specified and directed by Engr-in-Charge. Make: SEIKO/RYBO/SPECTRUM/ NMC/L&K/ESSCO (DELUXE)

S&F in repairs soap dish, vitreous China White, approximate size 160 x 160 x 90mm fixed with plugs with chromium plated brass screws all as specified and directed by Engineer-in-Charge.

S&F in repairs bib taps 15 mm bore, cast copper alloy chromium plated screwed down high pressure, with crown or capstan head, screwed for iron pipe all as specified and directed by Engr-in-Charge. Make: SEIKO/RYBO/SPECTRUM/ NMC/L&K/ESSCO (DELUXE)

S&F 15mm bore GI water tubing medium grade with all fittings and fixed to wall, floor, ceiling complete including short lengths including taking down existing GI pipe all as specified and as directed by Engr-in-charge. Make: TATA/JINDAL/ZENITH

S&F in repair towel rail 600mm long between flanges 20mm dia brass chromium plated D type complete all as directed by Engr-in-Charge.

S&F PVC (SWR) pipes 110mm bore single socket in any length with rubber ring joints fixed to wall or laid in floors including taking down existing pipes complete all as directed by Engr-in-Charge.

S&F PVC (SWR) pipes 75mm bore single socket in any length with rubber ring joints fixed to wall or laid in floors including taking down existing pipes complete all as directed by Engr-in-Charge.

M&L in repairs PVC (SWR) bend 110mm dia plain icomplete all as specified and directed by Engr-in-Charge. Make for item No 64 to 66: PRINCE/ SUDHAKAR/ NANDI/ FINOLEX/ SWASTIK/SUPRIME

M&L for point wiring with 1.5 Sqmm (nominal area) PVC insulated un - sheathed single core stranded copper conductor FRLS cable 1100 volts grade (conforming to IS) drawn through and including rigid non metallic PVC conduit of suitable size with all necessary fittings, concealed in walls/ceilings etc., including 1.5 Sq mm PVC insulated copper conductor FRLS cable for earth continuity conductor and connected to earth dolly and to be terminated in 1.6 mm thick pressed steel terminal boxes concealed type for mounting fittings like switch, socket, fan regulator etc., for one light /fan point controlled by one switch/one bell / buzzer point controlled by one bell push/one 3 / 5 -pin switch socket outlet 5 amps on independent board including taking down existing unserviceable point wiring including switches, sockets, regulators, ceiling roses, terminal boxes and making good disturbed surfaces including testing on completion complete all as specified and directed by Engineer-in-Charge.

All as per item No. 67 above but for One 3/5 pin switch socket outlet 5 amps on same board along with other switches complete all as specified and directed by Engineer-in-Charge.

M&L for point wiring with 2.5 Sqmm (nominal area) PVC insulated un - sheathed single core stranded copper conductor FRLS cable 1100 volts grade (conforming to IS) drawn through and including rigid non metallic PVC conduit, medium grade of suitable size with all necessary fittings, concealed in walls/ceilings etc., including 2.5 Sqmm PVC insulated copper conductor FRLS cable for earth continuity conductor and connected to earth dolly and to be terminated in 1.6 mm thick pressed steel terminal boxes concealed type for mounting fittings like switch, socket, fan regulator etc., for one 5 / 6 -pin switch socket outlet 15 amps on independent board including taking down existing unserviceable point wiring including switches, sockets, regulators, ceiling roses, terminal boxes and making good disturbed surfaces including testing on completion complete all as specified and directed by Engineer-in-Charge. Make for Item No. 67 to 69 Cable: (i) Finolex, (ii) Plaza, (iii) Havells, (iv) Polycab, (v) KEI, (vi) Anchor Conduit: (i) Kinjal, (ii) Alwyn (iii) Harsh, (iv) Finolex (v) Berlia (vi) Plaza

S&F switch piano, flush button, single pole, 5 amps, one way complete all as specified and as directed by Engineer-in-Charge.

S&F switch socket combination 2 – in – one, 3 Pin / 5 Pin, 5 amps flush type complete all as specified and as directed by Engineer-in-Charge.

S&F switch socket combination 2 – in – one 6 Pin , 5 / 15 amps flush type complete all as specified and as directed by Engineer-in-Charge.

S&F ceiling rose 3 terminal PVC/Polycarnonate, isolated body complete all as specified and as directed by Engineer-in-Charge. Make for Item No. 70 to 73: (i) Anchor (ii) Plaza, (iii) Havells (Crabtree) (iv) ABB (v) Shalabh

Taking down wall light fittings and tube light fttings of any make & capacity and keeping in safe custody and refixing in the same position complete all as specified and as directed.

Supply and fixing LED mirror light fittings 2ft fitting Surface mounting, extruded aluminium housing with high quality polocarbonate diffuser, 10 Watt,1150 lumen output, guaranteed 25K burning hours, wide voltage protection range 140V-270 V, colour temp - 6500 K, Cool day light including taking down existing fitting and making good disturbed surfaces complete all as specified and as directed by Engineer-in-Charge. Make: Cat part No. BN 021LED 10 S - 6500 PSU GR S1 of Philips or equivalent of Crompton/Havells/Bajaj/Wipro.

S&F Decorative, wall mounting luminarie, made up of Polycarbonate body suitable for 14 W LED lamp (B-2 base), with 14 W LED lamp and connecting with 0.50 PVC sheethed 3 core cpper cable including taking down existing fitting complete all as specified and as directed by Engineer-in-Charge. Make: Modal "Glaze" of Havells or equivalent model of Philips/Bajaj / Crompton.

S&F sheet metal AC earth plug and socket of 3 pin with neutral with one No. MCB SP 20 Amps 240 Volts including taking down existing unserviceable fitting complete all as specified and as directed by Engineer-in-Charge.

S&F sheet metal enclosure DB TPN 4 way 415 V with 200 Amp rated bus bar, powder coated, double door including taking down existing DB with MCBs complete all as specified and as directed by Engineer-in-Charge.

S&F sheet metal enclosure DB SPN 12 way 240 V with 200 Amp rated bus bar, powder coated, double door including taking down existing DB with MCBs complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing of MCCB TP 100 Amps, 16 KA breaking capacity, 415 volts, 50 Hz complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing of MCB SPN 40 Amps, 10 KA breaking capacity, 240 volts, 50 Hz complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing of MCB SP 6 to 32 Amps, 10 KA breaking capacity, 240 volts, 50 Hz complete all as specified and as directed by Engineer-in-Charge. Make for Item No. 77 to 82: Legrand/Siemens/Schindler

M&L for sub main wiring complete with 2 runs of 6 Sqmm PVC insulated heavy duty and unsheathed FRLS cable with multistranded copper conductor and drawing through and including non metalic rigid PVC conduit of 25mm size concealed in wall/ceiling and connecting terminal ends including provision of 1 run of 6 Sqmm PVC insulated heavy duty and unsheathed FRLS cable with multistranded copper conductor as earth continuity conductor and connecting to earth dolly including taking down old unserviceable wiring and making good disturbed surfaces complete all as directed by Engr-in-charge. Note: 2 runs of 6 Sqmm and one run of 6 Sqmm and one run of conduit shall be measured as one unit length. Make Cable: (i) Finolex, (ii) Plaza, (iii) Havells, (iv) Polycab, (v) KEI, (vi) Anchor Conduit: (i) Kinjal, (ii) Alwyn (iii) Harsh, (iv) Finolex (v) Berlia (vi) Plaza

Sub Total of Schedule 'A'

Schedule of Credit (Minus) Rs. 80,825.00 B/F from Ser page No. 31 NOTE: Bidder shall insert credit amount as rate Rs. 80,825.00 in Green field under Col-M. If bidder does not insert the amount the same will be deducted from total amount of Schedule 'A' and accordingly total amount of tender will be considered in deciding the lowest tender.

Sub Total of Schedule of Credit

HEM RAJ GURUNG

G K SUTHAR

MS BRAHMA CONSTRUCTION

MS MAYA PRAKASH GOEL AND SONS

PRASAD PRADHAN AND SON

GEETA CONSTRUCTION

DEEP CHANDRA JOSHI