Construction of High School building at Uchapind Under P.R.I. Capex Budget.

Amount

Brick work with common burnt clay (non modular) bricks of class designation 7.5 in foundation and plinth including curing in cement mortar 1:4 (1 cement:4 coarse sand) (including all leads and lifts carriages of material by MT/HL)

Extra for brick work with common burnt clay bricks / cement concrete bricks in superstructure above plinth level upto floor five level (including all leads and lifts carriages of material by MT/HL)

12mm cement plaster of mix. 1:6 (1 cement:6 coarse sand) (including all leads and lifts carriages of material by MT/HL)

Providing and laying in position of cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: a) 1:5:10 (1 cement:5 coarse sand:10 graded stone aggregate 40mm nominal size) (including all leads and lifts carriages of material by MT/HL)

Providing and fixing strips in joints of terrzo / cement concrete floors. A) 40mm thick and 4mm thick.

Cement concrete flooring 1:2:4 (1 cement:2 coarse sand:4 graded stone aggregate) finished with a floating of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. a) 40mm thick with 20mm nominal size stone aggregate (including all leads and lifts carriages of material by MT/HL)

Dismantling wood work in frames, trusses, purlins and rafters upto 10 meters span and 5 meters height including stacking the material within 50 meters lead. a) Or sectional area below 40 sqcm.

Dismantling roofing including ridges, hips valleys and gutters etc. and stacking the material within 50 meters lead of : a) G.S.Sheet.

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting fixing in position and applying a priming coat of approved steel primer all complete.

Providing corrugated G.S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal / vertical or curved surface) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. a) 0.63mm thick with zinc coating not less than 275 gram/m2.

Brick work with common burnt clay (non modular) bricks of class designation 7.5 in foundation and plinth including curing in cement mortar 1:6 (1 cement:6 coarse sand) (including all leads and lifts carriages of material by MT/HL)

Extra for brick work with common burnt clay bricks / cement concrete bricks in superstructure above plinth level upto floor five level (including all leads and lifts carriages of material by MT/HL)

Carriage of the following materials by Mechanical Transport from source to site of work incl. loading, unloading and stacking complete :- a) Sand from Billawar crusher for an average lead of 25.00 Km. by M.T. b) Stone aggregate 40mm nominal size & above from Billawar crusher for an average lead of 25.00 Km. by M.T. c) Stone aggregate (Crusher bajree) below 20mm nominal size from Billawar crusher for an average lead of 25.00 Km. by M.T. d) Bricks from Hiranagar for an av. lead of 42.00 km. by M.T.