CONVERSION OF OLD CONVENTIONAL LIGHT FITTINGS INTO LED LIGHT FITTINGS AND REPAIR/ REPLACEMENT OF OLD ALUMINIUM POINT WIRING INTO COPPER WIRING AND OTHER ALLIED SERVICES AT SQAE (SA) KANPUR UNDER GE(I) (P) (FY) KANPUR.

Amount

Taking down old point wiring complete for light/fan/socket(5/15 Amps) bell point etc complete with all light fittings accessories, such as switch sockets 5/15 Amps ceiling rose etc including making good to the disturbed surface to match with the existing complete all as specified and directed by Engineer-in-Charge.

M&L for point wiring for the following the PVC insulated and unsheather cable 1.5 sq mm (nominal area) multistranded copper conductor 1100 v FRLSH grade single core including PVC casing and caping medium grade of appropriate size (not less than 25 mm dia) ISI marked on wall and surface on ceiling complete with all accessories and all as specified including 1.5 sq mm PVC insulated unsheather multistranded copper conductor to common earth and connected to earth dolly for following :- One light point control by one switch

All as per item No. 2 above but one ceiling fan/exhaust fan control by one switch

All as per item No. 2 above but one 3 pin socket outlet, 5 Amps independent

All as per item No. 2 above but one 3 pin 5 amps socket outlet on the same board with other switches

ditto as per item No. 2 above but wire 2.5 sq mm cable for switch socket outlet 3 pin 15 Amps with 1.5 sq mm as earth continuity conductor.

ditto as per item No. 2 above but wire 4.0 sq mm cable for switch socket outlet 3 pin 15 Amps with 2.5 sq mm as earth continuity conductor.

Material and labour for point wiring with 1.5 sqmm single core PVC insulated unsheathed cable 1100 volt FRLS grade ISI marked with multistranded copper conductor drawn through existing concealed conduit in / on wall/ceiling with provision of 1.5 sqmm single core cable green in colour PVC insulated copper conductor as earth continuity conductor connected to earth dolly for following:- One light point controlled by one 05 Amps switch.

All as per item No. 8 above but One fan/Exhaust fan point controlled by one switch.

All as per item No. 8 above but One socket out multi pin 5 Amps controlled by one switch on independant board.

All as per item No. 8 above but One socket out multi pin 5 Amps controlled by one switch on same board.

Material and labour for point wiring with 1.5 sqmm single core PVC insulated unsheathed cable 1100 volt FRLS grade ISI marked with multistranded copper conductor drawn through and including concealed conduit in / on wall/ceiling with provision of 1.5 sqmm single core cable green in colour PVC insulated copper conductor as earth continuity conductor connected to earth dolly for following:- One light point controlled by one 05 Amps switch.

All as per item No. 12 above but One fan/Exhaust fan point controlled by one switch.

All as per item No. 12 above but One socket out multi pin 5 Amps controlled by one switch on independant board.

All as per item No. 12 above but One socket out multi pin 5 Amps controlled by one switch on same board.

ditto as per item No. 12 above but wire 2.5 sq mm cable for switch socket outlet 3 pin 15 Amps with 1.5 sq mm as earth continuity conductor.

ditto as per item No. 12 above but wire 4.0 sq mm cable for switch socket outlet 3 pin 15 Amps with 2.5 sq mm as earth continuity conductor.

S & F switch piano flush type one way 5 Amps

Supply and fix ceiling rose three terminal

S & F socket outlet 2 in 1, 3 pin, 5 Amps

S&F socket outlet 2 in 1, 3 pin, 5 and 15 Amps flush type.

S&F switch piano, flush ype single pole 15 Amps

Supply and laying and testing cable in repair XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 6 sq mm 2 core.

Excavation in trenches in soft/ loose soil not exc. 1.5 metre wide and n'exc. 1.50m deep for pipes and getting out complete all as specified and directed.

Returning filling including spreading leveling watering and well ramming in layers not exc 25Cm in soft/ loose soil, complete all as specified and directed.

Removing excavated material in soft/ loose soil n'exc 50M and depositing where directed at a level n'exc1.5M above the starting point, complete all as specified and directed.

M&L for sand cushning to U/G cable in layers of 23cm thick( 8 Cm before laying the cable and 15Cm thick after laying the cable) in trenches including watering and consolidation, complete all as specified and directed.

Supply and lay well burnt brick class B as protection to cable in cable trenches all as specified and directed

Supply and fixing in repair Industrial LED channel light fitting (4') 39 watts, 5700 K, suitable for surface mounted complete all as specified and directed. Cat No. LE10-491XXX-57XX, Make : Wipro or equivalent in Bajaj or Havells.

Demolition of cement concrete of any description for laying of pipes / cables and making good to the disturbed surfaces to match with existing complete all as specified and directed. Note : providing PCC work will be measured and paid seperately under relevant items.

M & L for GI tubing (light grade) with all necessary fitting laid in trenches/under road crossing, or fixed on poles/walls/under floor etc complete all as specified and as directed for the following sizes:- a) 40 mm dia bore

M & L for PCC 1:2:4 type B1 ( with 20 mm graded stone agrregate) in foundation and filling in road cut surfaces

Taking down old unserviceable aluminium sub main wiring and S & F sub main wiring for circuit of size 6 sq mm 2 core alongwith earth wire of 6 sq mm single core of FRLS PVC insulated unsheathed cable (FR), 1100 volts grade with multistranded copper conductor, conforming to IS-649, 1100 V grade and drawn through and including PVC non metalic rigid conduit/casing of suitable size and conduit/casing accessories run on surface of wall/ceiling etc and connecting terminal ends of suitable size complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repair surface and wall mounted LED batten 20 watts, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver complete with provision PVC copper wire 1.5 sq mm 3 core of required length upto ceiling rose complete all as specified and directed. LTDC1220WLED/WD ( LTDC161820WLED + LT4F20WLEDT8/WD) of Make : C&S, Cat No. (REGAL BATTENT8U PTO 1X22 WDSBWH + 1213T8 DSTL20W LED 865SGLASS) of Make : Havells.or Cat No. LL20-221-XXX-65NE3 in Wipro

Supply and fixing in repair LED 36 watts suitable for armstrong/Grid ceiling of size (600 x 600) mm complete connecting to existing ceiling rose with three core flexible wire 0.5 sq mm complete all as specified and directed. Cat No. CRC010R033HP57UGR of make Wipro, Cat No. LTCRP36WLED2X2 of Make : C&S, Cat No. CAT NO : PLANO 2X2 PLR36WLED857S of Make Havells

Supply and fix in repair pole/building LED flood light 100 Watts complete with sitable clamps nut bolts etc of suitable sizes incl wiring from pole box to Ftg, Cat No. LTEF100WHPLED, Make : C&S, Cat No. JETAIRISFLS100WLED757SYMLTG of Make : Havells and Cat No. LF-19-931-60-57-XX, Make : Wipro

Taking down ceiling fan of any size and depositing to Fy auth and Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep, BEE. Five star rated with brushless direct current motor (BLDC)

Taking down exhaust fan of any size and depositing to Fy auth. and Supply and fix exhaust fan, steel body AC single Phase. 230V of size 380m sweep with, blades, and frame and louvers.

Supply and fix in repair LED Highbay light 80 W with pressure die cast aluminium housing, complete with all accessories. Cat No LTEF80WHPLED BAYLIGHT of make C&S, Cat No. BAYBRITE FLAREHB 80WLED857SW BBOLTG of make Havells or equivalent in Wipro

Supply and fixing in repair TPN DB's 4 way vertical type 415 V, double door suitable for housing of 100 Amps MCCB as main incoming. ABB/Legrand/Schnider

Supply and fixing MCCB 100 Amps, 4 Pole, 16 KA, suitable to be fixed in 4 way TPN DB complete all as specified and directed.

Supply and fix in replcement MCB DB double door type single phase with common eath and neutral bus and 200 amps copper bus bars complet , 240 volts ,08 way.

Supply and fix in replcement MCB DB double door type single phase with common eath and neutral bus and 200 amps copper bus bars complet , 240 volts ,12 way Make : ABB/Indo Asian/L&T

S & F MCB SP 6-32 Amps

S & F MCB SPN 40 Amps

S & F MCB SPN 63 Amps

M&L for earthing to switch gear/MCB DB with mild steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground (earth pit not less than 2.25m deep below normal ground level) connected to galvanised earth lead wire 4.0 mm dia by means of galvanised iron nuts, bolts and washer, earth lead connected to eqpt as directed, earth plate surrounded with adequate quantity of charcoal dust mixed with common salt to a packed thickness of 15 cm all around the plate including necessary earth work, PCC chamber and reinforced PCC cover made by PCC 1:3:6 type C-1 as in pit chamber and RCC pit cover 50 mm thick precast RCC 1:2:4 type B-1 duly reinforced with 6mm dia MS bar at 150mm c/c both ways with 10 mm dia MS round bar as handle, 20 mm bore GI pipe medium grade for watering and 40 mm dia GI pipe light grade for protection of earth lead up to 3 mtr with funnel, wire mesh etc with and including testing complete all as specified and as shown in electrical plate No 3 of MES sch Part I.

Earthing continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed or any other indicated situation for loop earthing etc. As required 4 mm dia galvanised iron or steel wire.

S & F sub main wiring for circuit of size 10 sq mm 2 runs (FRLS) alongwith earth wire of 10 sq mm single runs of FRLS PVC insulated unsheathed cable, 1100 volts grade with multistranded copper conductor including PVC conduit of suitable size complete all as specified and directed by Engr-in-Charge. (for SPN DB 08 way) .

All as per item No. 49 above but of wire 4 sq mm two runs and 4.0 sq mm single run as earth wire. (for power socket)

All as per item No. 49 above but of wire 2.5 sq mm two runs and 2.5 sq mm single run as earth wire. (for flood lgt & bldg S/L)

IMPEX TRADERS