REPAIR/ CLEANING OF SEWAGE LINES, MANHOLES, SEPTIC TANKS, SOAK WELLS AND CONNECTED REPAIR WORK AT OMQ, RS, ARJAN ENCLAVE AND REPAIR TO JOINERY AND ALLIED WORKS AT OMQ AND 10AFH AREA AF UNDER GE (AF) HASIMARA

Amount

SCHEDULE 'A' PART-I De-watering/bailing out of contaminated/sewage water including other foreign materials from septic tanks/manholes/soakage wells of any dia and depth by mechanical means using monoblock/sewage pump etc after plugging of incoming sewage lines and throwing/removing contaminated/sewage water into low laying non-residential area or into open drains/Nallah and spreading un-slacked lime to disinfect the area cleaned, complete all as directed by the Engineer in Charge.

Taking out/Bailing out the sludge / semi solid materials including other foreign materials from septic tanks / manholes of various sizes and depths upto 1.5m as required by manually or by pumping with suitable pumping machinery and taking out sludge/ semi solid materials / any other foreign materials from septic tanks etc and removing the sludge within 50 m distance and deposited in a pit to be excavated and covered with earth filling upto 30cm depth of pit and spreading un-slacked lime to disinfect the area cleaned and over the pit including removing and refixing of manhole covers as required complete all as specified and directed by Engineer in Charge. (Note: (i) The cost of Excavation and earth work for pit, bamboo matting, temporary barricade of the pit and providing sufficient bleaching powder shall deem to be included in the unit quoted rate (ii) Hiring charges and cost of fuel for sewage pump shall deemed to be included in the unit quoted rate and nothing extra shall be paid in thism account)

All as per serial item No. 02 above but depth exc 1.5m and n.exc 3.0m complete ditto

All as per serial item No. 02 above but depth exc 3.0m and n.exc 4.5m complete ditto

Cleaning of blockage in sewage lines / drain pipes of internal dia 100mm/150mm/200mm by rodding or by any other suitable means and cleaning the entire line and well flushing between the manholes complete all as specified and directed by Engineer in Charge.

Cleaning of blocked WC's and soil pipes of any dia up to first manhole by rodding or by any other means and well flushing with water the entire line after cleaning complete all as directed by Engineer - in - Charge..

Cleaning of blocked Floor/nahani trap in bathroom/kitchen/wash basin etc and soil waste pipe of any dia upto gully traps by using rubber hand pump or rodding and opening the eye and making the line clear for smooth function complete all as specified and directed.

Cleaning of blocked gully traps and waste pipes of any dia upto first manhole by removijng the deposited sludge or any blockage and flushing out with water complete all as specified and directed.

Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation, etc and getting out in soft/loose soil complete all as specified and directed.

Excavating in trenches not exc. 1.5 metre wide and exc. 1.5 metre & not exc. 3 metre depth (beyond the first 1.5 metre) for foundation of poles etc and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm as in soft/loose soil complete all as specified and directed.

Removing excavated material (soils) not exc. 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 round section) in cement concrete 1:2:4 type B1, smooth finished and reforming benching as required for 100 mm bore of pipe complete all as specifieed and directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 round section) in cement concrete 1:2:4 type B1, smooth finished and reforming benching as required for 150 mm bore of pipe complete all as specifieed and directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 round section) in cement concrete 1:2:4 type B1, smooth finished and reforming benching as required for 200 mm bore of pipe complete all as specifieed and directed.

Demolition and breaking 100mm bore drain pipes (SGSW/AC/RCC) set in cement mortar including cement concrete bedding and removal of debris/rubbles etc to a distance n.exc 50m complete all as specified and directed. (Note: Necessary axcavation and earth work shall be measured and paid seperately)

Demolition and breaking up to 150mm bore drain pipes (SGSW/AC/RCC) set in cement mortar including cement concrete bedding and removal of debris/rubbles etc to a distance n.exc 50m complete all as specified and directed. (Note: Necessary axcavation and earth work shall be measured and paid seperately)

Demolition and breaking up to 200mm bore drain pipes (SGSW/AC/RCC) set in cement mortar including cement concrete bedding and removal of debris/rubbles etc to a distance n.exc 50m complete all as specified and directed. (Note: Necessary axcavation and earth work shall be measured and paid seperately)

M & L for Plain cement concrete 1:3:6, type C-2 (using 40 mm graded stone aggragate) as in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 100 mm bore SGSW drain pipes complete all as specified and directed .

M & L for Plain cement concrete 1:3:6, type C-2 (using 40 mm graded stone aggragate) as in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore SGSW/RCC drain pipes complete all as specified and directed .

M & L for Plain cement concrete 1:3:6, type C-2 (using 40 mm graded stone aggragate) as in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 200 mm bore SGSW/RCC drain pipes complete all as specified and directed .

M & L for Salt glazed stone ware drain pipes 100 mm bore, grade 'A' laid in trenches, jointed and tested complete all as specified and directed.

M & L for Salt glazed stone ware drain pipes 150 mm bore, grade 'A' laid in trenches, jointed and tested complete all as specified and directed.

M & L for Salt glazed stone ware drain pipes 200 mm bore, grade 'A' laid in trenches, jointed and tested complete all as specified and directed.

Demolition of un-reinforced cement concrete in ground floors and pavings n.exc 15cm thickness, (Below or above Ground level) and disposal of debris and rubbish to a distance n.exc 100m complete all as directed by the Engr-in-Charge

M & L for Plain cement concrete 1:3:6, type C-2 (using 40mm graded stone aggregate) as in surface channel, drains etc complete all as specified and directed.

Extra for forming fair finished to concrete surface of drain 30cm inner girth in cement including forms, mould, mitred/stopped etc complete all as specified and as directed.

Add or deduct for each 25mm girth or part thereof over or under 30cm including form mould, mitred/stopped etc. complete all as specified and as directed.

M & L for 75 mm thick, plain cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate) as in plinth protection etc, finishing cement concrete surface even and smooth without using extra cement including making joints with bitumastic filing in proportion of bitumen and sand 1:2 complete all as specified and directed.

Demolition of brick work or stone / boulder masonry, built in cement mortar including all quoins, pillars etc stacking the serviceable bricks after removing mortar and cleaning for re-use and disposal of debris and rubbish to a distance n.exc 100m as directed by the Engr-in-Charge.

M & L for brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:4 using old size bricks as in manholes, etc complete all as specified and directed.

All as per item No. 31 above but except brick complete all as specified and directed. (Note: Old serviceable brick as obtained from item No. 30 above shall be re-used at site after removing mortar and cleaning etc)

M & L for Plain cement concrete 1:2:4, type B-1, (using 20 mm graded stone aggregate) as in lintel upto 1.5m span, cills and other similar band, plinth course, parapet, railing upto 60cm height, coping, kneelers, bed plates, hold fast block etc including weathering slightly rounded or chamfered angles including necessary form work complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed

M & L for rendering 15 mm thick in two coats (10mm+5mm each) on fair faces of brick work or concrete surfaces in cement mortar 1:4, mixed with integral water proofing compound with weight of cement in top layer as per manufacturer's instructions and finished the surface even and fair without using extra cement complete all as specified and directed. (Note : WPC shall be measured and paid separately against respective item).

M & L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick masonry or concrete surfaces and finishing the surfaces even and fair without using extra cement complete all as specified and directed.

Supply only integral liquid water proofing compound (ISI marked) complete all as specified and directed.

M & L for preparing newly plastered surfaces of walls, etc and applying three coats of white wash complete all as specified and directed.

M & L for Precast Reinforced Cement Concrete 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in cover slab of drain, etc and set in cement mortar 1:4 including necessary form, moulds, etc including demolition of old unserviceable reinforced cement concrete complete all as specified and directed by the Engr-in-Charge. (Note : Reinforcement shall be measured and paid separately)

S & F TMT steel bars 10 mm dia., and over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed.

S & F TMT steel bars 6mm to 8mm dia., and over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed.

S & F in repair Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed.

S & F in repair Grating doom 125mm dia of PTMT (Minimum weight 40gms) complete all as specified and directed.

S & F in repairs, vitreous China squatting pan, 'Orissa' pattern, size 580 x 440 mm white with integral foot rest and 'P' or 'S' trap, including provision of lime concrete bedding, connection to trap and flushing pipe etc complete including making good to disturbed surfaces of floor to match with existing specifications complete all as specified and directed.

S & F in repairs, vitreous China wash down water closet pan (pedestal pattern), white, including connection to outgoing drain and flushing pipe, anti syphonic pipe with seat and cover complete but excluding flushing cistern & flush pipe including making good damaged/disturbed surfaces complete all as specified and directed.

S & F Semi-Pedestal pattern (Anglow-Indian type), vitreous China water closet pan, white, with 'P' or 'S' trap, including flushing pipe, etc complete and making good to disturbed surfaces of floor by filling with PCC 1:4:8 type D-2 to match with the existings including taking down the existing old one complete all as specified and directed.

Taking down soil/ waste vent and rain water pipes of any description and size and in any position including all fittings complete all as specified and as directed.

S & F 110 mm bore, PVC (SWR), Soil waste and vent pipes in any length with or without ears, with cement joints fixed to wall, etc with all necessary fixing arrangement complete all as specified and directed.

All as per item No. 48 above but fixing only complete all as specified and directed. (Note: Old serviceable pipe as obtained from item No. 47 above shall be re-used at site)

S & F 110 mm bore, PVC (SWR), Soil waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors, etc complete all as specified and directed.

S & F 75 mm bore, PVC (SWR), Soil, waste and vent pipes, single socketed in any length with rubber ring joints fixed to walls, etc complete all as specified and directed.

S & F 75 mm bore, PVC (SWR), Soil waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors, etc complete all as specified and directed.

S & F 110 mm bore, PVC (SWR) bends of any radius with oval access door complete all as specified and directed.

S & F 75 mm bore, PVC (SWR) bends of any radius with oval access door complete all as specified and directed.

S & F 110mm bore, PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and directed.

S & F 110 mm bore, PVC (SWR) branch piece, single (single Y) equal or unequal provided with access door complete all as specified and directed.

M & L for non-skid, ceramic, coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm, in floors etc, including 15 mm thick screed bed in cement mortor 1:6 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including demolition of old unserviceable damaged tiles complete all as specified and directed.

M & L for Glazed, ceramic, coloured tiles of size 450mm x 350mm/ 300mm x 200mm x 6-7mm thick, on vertical surfaces such as skirting, dados etc, including 10 mm thick bedding in cement mortor 1:4 and set & jointed in neat cement slurry & pointed in white or coloured cement to match with the shade of tiles including demolition of old unserviceable damaged tiles complete all as specified and directed.

Material and labour for 25 mm thick pre-polished cement concrete chequered tiles, glossy finish , smooth in design , compressive strength 300 kg/Sqcm, ISI marking (IS-13801-1993), set, jointed in neat cement slurry and pointed with white cement mixed with pigment to match over and including 20mm thick screed bed in cement mortar 1:6 including demolition of old unserviceable damaged tiles complete all as specified and directed

S & F in repair 75 mm bore, PVC (SWR) floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

S & F in repairs, 40mm dia flexible PVC waste pipe for wash basin/kitchen sink complete all as specified and directed

S & F in repairs, 32mm dia flexible PVC waste pipe for wash basin/kitchen sink complete all as specified and directed

S & F in repairs, Vitreous China wash basin, size 630 x 450mm, white, flat back, with CP waste, coupling, chain and plug and porcelean stopper & backets including cutting for and pinning in ends of brackets but excluding tap complete all as specified and directed.

S & F in repairs, 15mm bore, PVC connection pipe 600mm long with PTMT nuts at both ends complete all as specified and directed.

S & F in repairs, 10 litre capacity, PVC valve less syphonic action type, flushing cistern, low level, white, with inlet, ball valve, flush pipe, float and handle including brackets complete all as specified and directed.

S & F in repair 32 mm dia waste coupling of PTMT (Half or full threaded ) (Minimum Weight 45 grams) complete all as specified and directed.

Supply & fixing 15mm bore pillar tap standard of PTMT, any colour, high pressure, long shank and cup screwed for iron pipe and fixed (minimum weight 110 gms) complete all as specified and as directed.

S & F in repairs, 15mm bore, bib taps, fancy type, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F in repairs, 15mm bore, bib taps of PTMT, any colour high pressure, screwed for iron pipe and fixed (minimum weight 90 gms) complete all as specified and directed.

S & F in repair 40 mm dia waste coupling of PTMT (Half or full threaded ) (Minimum Weight 60 grams) complete all as specified and directed.

S & F in repairs, stainless steel kitchen sinks with drainage board made of 1 mm thick sheet for kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm and bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S & F in repairs, 20 mm bore, Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight - 210 gms) complete all as specified and directed.

Cleaning and removing all scale and dirt, etc, from tanks of capapcity exc 500 & n.exc 1000 Ltrs and from mouths of circulating pipes, etc. using bleaching powder and washed with water including dismantling and reconnecting and refixing in psoition including writing date of cleaning with nwhite synthetic enamel paint as "CLEANDED ON" complete all as specified and directed.

Cleaning and removing all scale and dirt, etc, from tanks of capapcity exc 250 & n.exc 500 Ltrs and from mouths of circulating pipes, etc. using bleaching powder and washed with water including dismantling and reconnecting and refixing in psoition including writing date of cleaning with nwhite synthetic enamel paint as "CLEANDED ON" complete all as specified and directed.

Demolition of existing sunken floor including PCC/ tile floor, lean concrete etc and disposal of debris and rubbish to a distance n.exc 100m complete all as directed by the Engr-in-Charge

M & L for cleaning the surfaces of sunken floor using wire brush, brooming down and washing down with water to remove dust etc and brushing with neat cement slurry @ 0.50 Kg/Sqm mixed with acrylic based polymer modifieed cementitou composite Pidifin 2K) @ 0.50 Kg/Sqm complete all as specified and directed. (Make: "Pidifin 2K" of Dr. Fixit and equivelant of make Pidilite/STP)

M & L for rendering 10 mm thick in sunken portion in cement mortar 1:3, mixed with integral liquid water proofing compound as per manufacturer's instructions and finished the surface even and fair without using extra cement complete all as specified and directed. (Note : WPC shall be measured and paid separately against respective item).

M & L for plain cement concrete 1:5:10, type E-2 (using 40mm graded stone aggregate) as in sunken portion, finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

M & L for 25mm thick Plain cement concrete 1:2:4, type B-0, (using 12.5 mm graded stone aggregate) as in sunken portion laid in slope complete all as specified and directed.

Taking down chowkats or frame, n.exc 1.5 Sqm each with shutters (without taking off shutter from the frame) complete all as specified and directed.

Taking down chowkats or frames, exe 1.5 but n.exc. 4 Sqm in each with shutter (without taking off shutter from the frame) complete all as specified and directed.

S & F Well seasoned 2nd class hard wood plain, solid, straight chowkat and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

M & L for Pressed steel frames 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

M & L for Pressed steel frames 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

M & L for Providing cement concrete 1:3:6 type C-0 (using 12.5 mm graded stone aggregate) for filling hollow portion, pressed steel frames, etc complete all as specified and directed.

M & L for Preparation of new steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide, zine chrome primer complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm but n. exc 2 Sqm each complete all as specified and directed.

S & F 30 mm thick, Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S & F 30 mm thick, factory made, glazed/skeleton shutters with second class hard wood,open rebated and prepared to receive glass, gauze, etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass, etc complete as specified and directed . Sizes of members of shutters complete all as specified and directed as per SSR Part I, Section -8, clause 8.24 (a).

S & F 35 mm thick, 2nd class hardwood, factory made, Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S & F 25 mm thick, Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides as in cup board shutter complete all as specified and directed.

M & L for Preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer complete all as specified and directed.

S & F Solid PVC Double door frame of size 50mm x 95mm made out of 5mm Plain colour PVC sheet reinforced with M.S.tube, suppling & fixing in opening as per specification & drawing complete all as directed.

S & F Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded prelam PVC Sheet on the front face & 2mm prelam PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing, complete all as directed.

S & F 100 mm, Butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

S & F in repair 100 mm Butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

S & F Aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy, length of bolt 250 mm, complete all as specified and directed.

S & F in repair Aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clipes of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy, length of bolt 250 mm, complete all as specified and directed.

S & F 150 mm long, Aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

S & F in repair 150 mm long, Aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

S & F 150 mm size, Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S & F in repair 150 mm size, Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S & F 100 mm size, Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S & F 125 mm size, Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S & F in repair 125 mm size,Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S & F mild steel bands, straps, supports or stays of rain water, ventilating pipes including bolts, hooks (stay) for large gates, hook and pintel hinges, clamps, hold fasts, wall ties,flat iron fillets for securing wire mesh, wind tie, fan hook and similar work including necessary drilling bolting or riveting etc conforming to Fe – 290 Gde E – 165 complete all as specified and as directed.

M & L for plain cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate) for embedding holdfast, bed block, cills, etc including necessary form work complete all as specified and directed.

Taking down Aluminium shutter of any size, description and refixing in the same opening after minor repairs including hinges, handles, gasket rubber roller, wiremesh etc as required complete all as directed.

Taking down Aluminium shutter of any size and description, in any position for door/window/ventilator and refixing in the same opening after necessary repair including providing accessories required if any complete all as directed.

S & F powder coated (minimum 15 micron aluminium anodised door comprising of frame of size 101.60mmx44.6mmx2.4mm thick push/pull type glazed door shutter having top and bottom section 83x44.5x2.4mm and 100x44.5x2.4mm thick respectively, styles section 80x44.5x2.4mm thick and lock rail of size 100mmx44.5mmx2.4mm thick including necessary jointing cleat, glazing clips, rubber packing, anodised aluminium snap beading, screws of suitable size including 5mm thick tinted sheet glass in both panel, hinges, mortice lock, stays & aluminium anodised handle of suitable size, etc complete all as specified and directed.

Taking down and refixing shutters of any description not exc 1 sqm each in the same opening complete as directed.

Taking down and refixing shutters of any description exc 1 sqm but n.exc 2 sqm each in the same opening complete as directed.

Taking down steel window/ventilator of any size and description and removal from site of work complete all as directed.

S & F in repair Steel window/ventilator for industrial buildings, fixed type, with glazing bars complete complete all as specified and directed.

S & F in repair Steel windows with side hung shutters including box type hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

M & L for Mild steel framed work such as grills, gratings, gates etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bar, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-410-0 Gde E-250 complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips complete all as specified and directed.

S & F 3 mm thick, sheet glass, frosted and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

S & F 3 mm thick, sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

S & F 4.8 mm thick, sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

S & F 4.8 mm thick, sheet glass, frosted and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

S & F 4.8 mm thick, sheet glass, ordinary quality and glazing with oil putty in square exceeding 0.5 Sqm in each pane complete all as specified and as directed.

S & F 4.8 mm thick, sheet glass, frosted and glazing with oil putty in square exceeding 0.5 Sqm in each pane complete all as specified and as directed.

Taking down steel window/ventilators shutter of any size and description, cutting projected hinge and fixing/welding the box type hinge, handle, stay and refixed in the same opening after minor repairs/welding as required complete all as directed. (Note: Box type hinge, handle and stay shall be measureed and paid seperately as supply only)

S & F in repairs, Aluminium (Die cast) body door Closer hydraulically regulated, designation No 3, universal type, suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 Kg complete all as specified and directed.

S & F in repairs, Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers, etc as in curtain rail complete all as specified and directed.

S & F in repairs mild steel box type hinge suitable for steel window and ventilator complete all as specified and directed.

S & F in repairs mild steel peg stay including nuts & bolts etc suitable for steel window and ventilator complete all as specified and directed.

S & F in repairs mild steel handle for steel window for left/right shutter complete all as specified and directed.

S & F 300 mm long, mild steel, ordinary rat tail rod pattern springs incuding roller and roller plate complete all as specifed and directed.

S & F in repairs, 300 mm long, mild steel, ordinary rat tail rod pattern springs incuding roller and roller plate complete all as specifed and directed.

S & F in repair galvanised mild steel wire cloth. 0.56mm nominal dia of wire and average width of aperture 1.0mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

S & F galvanised mild steel wire cloth. 0.56mm nominal dia of wire and average width of aperture 1.0mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness including cover fillets complete all as specified and directed.

S & F 4 mm thick, Non asbestos fibre cement building boards fixed or laid/inserted to timber/GI/Aluminium framework with screws complete all as specified and directed.

S & F 4mm thick non asbestos fibre reinforced designer ceiling board (610mmx610mm) with hot drip heavy duty suspended ceiling grid system T-2430 with GI frame work for seamless ceiling comprising of GI perimeter channel, unequal flanges and web etc of suitable size suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section including Hangers 6 mm dia GI fixed to roof by means of ceilling cleats made out of GI flat per manufacturers instructions complete all as specified and directed by the Engr-in-Charge.

S & F 2nd class hard wood, Plain fillets. square, rectangular or triangular in section, wrought, secured with screws, cross sectional area exc 6 Sqcm and n.exc 13 Sqcm complete all as specified and directed.

S & F 2nd class hard wood, Plain fillets. square, rectangular or triangular in section, wrought, secured with screws, cross sectional area exc 3 Sqcm and n.exc 6 Sqcm complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.

S & F 15 mm thick, second class hard wood boarding, clean sawn with butt joints and fixed with nail as in shelves; Partitions and shelves of built-in cupboards, almirahs, book cases, toilet boxes, racks, pelmets and similar work and fixed as In repairs to replace old and or decayed boarding in patches including cutting out old, piecing, heading joints, etc.complete all as specified and directed.

M & L for 18mm thick, prelaminated wooden finish PVC particle board for cup board and fixed with and including necessary accessories etc complete all as specified and directed.

M & L for 12mm thick, prelaminated wooden finish PVC particle board for cub board and fixed with and including necessary accessories etc complete all as specified and directed.

S & F Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed.

S & F Continuous (piano) hinges, brass, bright finish, width of flaps 30mm (when open) complete all as specified and directed.

S & F 100mm Concealed hinges, galvanised mild steel, bright finish, with soft close system for cub board doors complete all as specified and directed.

S & F 75mm Hasp and staple, safety type, aluminium anodised including bolt to hinge plate and fixed with screws complete all as specified and directed.

S & F in repair 75mm Hasp and staple, safety type, aluminium anodised including bolt to hinge plate and fixed with screws complete all as specified and directed.

M & L for smooth functioning of steel window/ventilators shutter of size n. exc 1.0 Sqm by applying oil/grease after minor repairs/welding as required complete all as directed.

M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished the surfaces even and smooth without using extra cement complete all as specified and directed.

M & L for preparing newly plastered surfaces of internal walls, etc and applying two coats of distemper oil emulsion over a coat of alkali resistant primer complete all as specified and directed.

M & L for Preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed.

S & F in repair/replacement of steel ventilators as per exiting pattern made out of different mild steel sections with half top hung double shutters(glazed & gauged) and half fixed glazing with flat iron guard bar including necessary hinges,steel peg stay, handle, locking arrangement etc complete all as directed by Engg in Charge.

SHRI D P AGARWAL

M/S BIJAY KUMAR SHIVA

JOGINDER KUMAR GOYEL

M/S RATHIN ENTERPRISES

M/S. NARENDRA KUMAR GARG

B L SHARMA

M/S MANODEEP CONSTRUCTION