Repair/replacement to joinery, flooring, plumbing, sanitary, plaster and certain misc work at Dronachal Base under GE Dronachal

Amount

Demolition of cement concrete in ground floors and pavings not exc. 15 Cm thickness (below/above ground level) including floor finishes complete all as specified and directed

M&L for 75mm thick PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in plinth protection, surface finished even and smooth without using extra cement complete all as specified and directed

Use of forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade 'A' in plinth protection complete all as specified and directed

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) , removing serviceable tiles to store and rubish of the premisses complete all as specified and directed

M&L for non skid cramic tiles colured of size area of each tile exc 0.18 sqm but not exc 0.38 sqm in flooor and in skirting etc, jointed in neat cement slurry and pointed in white or colours cement to match complete all as specfied and directed over and including 15 mm thick screed bed in Cement Mortar 1:6 complete all as specified and directed

M&L for coloured non-skid ceramic tiles 7 to 8 mm thick (square/rectangular), coloured tiles, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate, including finishing of concrete topping even and rough complete all as specified and directed

M&L for coloured Non-skid Ceramic tiles 7 to 8 mm thick (square/ rectangular), coloured tiles, area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for coloured Glazed ceramic tiles in vertical surface 450 X 300 X 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to matchtiles in vertical surface including 10mm thick rendering in CM 1:4, complete all as specified and directed.

Demolition of brick and stone masnary work built in cement mortar incl all quions, arches, pillars etc. but excluding ashlar facings dressed stone work and precast concrete articles complete all as specified and directed.

M&L brick work with sub class ‘B’ modular bricks straight or curved o plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed.

M&L for PCC (1:4:8) type D-2 using 40 mm graded aggregate as in foundation filling & mass concrete complete all as specified and directed.

M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade (with grey cement and no pigment) over sand cushioning complete all as specified and directed.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons laid bedded and pointed in any mortar etc complete all as specified and directed

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed

S&F in repair Vitreous china wash hand basin (550X400mm) white, flat back excluding taps but including brackets & CP waste coupling 32mm, LDPE waste pipe 32mm upto floor trap complete all as specifed and directed.

S&F in repair vitreous china wash down water closet pan (pedestal pattern), white and trap including seat cover, fixing bolt, flush pipe, connection to drain (or out going pipe) and to flushing pipe, antisyphonage pipe, etc complete all as specified and directed.

S&F in repairs vitreous china squatting pan, ‘Orissa’ pattern', size 580 mm x 440 mm, white with integral foot rests, embedded and set in PCC 1:5:10 type E-2 incl flush pipe and making good to floor including removing rubbish complete all as specified and directed.

S&F in repairs 32mm bore LDPE waste pipe for WHB/ sink complete all as specified and directed.

S & F in repair 10 ltrs capacity PVC low level flushing cistern, of make specified with inlet, float valve and handle including bracket with 32 mm dia PVC flush pipe complete all as specified and as directed.

S&F in repair fancy type 15 mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs brass chromium plated shower rose with swivel joint not less than 50mm dia and not less than 200mm long complete all as specified and directed.

S&F in repairs CP SS Soap dish, fixed to wall with plugs and screws complete all as specified and directed.

S&F in repair 15mm bore fancy type CP bib tap cast copper alloy with crutch or butterfly handle, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair two way bib tap 15mm dia complete all as specified and directed.

S&F in repair CP towel rail 450mm long fixed with and incl CP brass screws complete all as specified and directed.

S&F in repair CP towel ring of approved design and pattern by GE complete all as specified and directed.

S&F in repair 15mm bore dia Chromium plated stop valve/angle cock, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed complete all as specified and directed

S&F in repair CP Toilet paper holder all as specified and approved by Engr-in-charge complete all as specified and directed.

S&F in repairs PVC connection 15mm dia of length not less than 450mm with both ends, brass fly nut for water supply complete all as specified and directed.

S&F in repair CP jet spray with flexible pipe length not less than 1.00mtr (Minimum) fixed to EWC suitable for 15mm bore pipe complete all as specified and directed.

S&F in repair Health faucet( ABS Body) mild steel CP suitable for 15mm dia pipe with 1.25m long flexible tube and ABS wall hook incl making connections and fixd in position complete all as specified and directed.

Taking up or down pvc/ steel tubing of 15/20 mm bore and connections complete all as specified and directed.

S&F CPVC pipe 20mm dia of grade SDR-11 (class-I) including all CPVC and brass fittings fixed to wall, floor or ceiling or laid in floors etc complete all as specified and directed.

S&F CPVC pipe 25mm dia of grade SDR-11 (class-I) including all CPVC and brass fittings fixed to wall, floor or ceiling or laid in floors with and incl clamps etc complete all as specified and directed.

Cutting channels, grooves or rebates n exc 15cm girth, and trimming surface complete all as specified and directed.

S&F in repair PVC (SWR) floor trap plain with grating having dia meter of out let 75mm including jointing with solvent cement complete all as specified and directed.

Dismantling of old broken water storage tank cap exc exc 250 ltrs and n exc 500 ltrs complete all as specified and directed

Dismantling of old broken water storage tank cap exc 500 ltr and n exc 1000 ltrs complete all as specified and directed

S&F rotational moulded polyethylene water storage tank 500 ltrs cap cyllinderical vertical with closed top hoisted and fixed in position at roof or stand all as specified in SSR Pt-I complete all as specified and directed

S&F rotational moulded polyethylene water storage tank 1000 ltrs cap cyllinderical vertical with closed top hoisted and fixed in position at roof or stand all as specified in SSR Pt-I complete all as specified and directed

S&F in repairs 25mm Ball (float) valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron/pvc/cpvc pipe in water tank and fixed. (Minimum weight 25mm-455gms) complete all as specified and directed

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including beding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mmx 460mm bowl size 410mm x 330mmx 160mm complete all as specified and directed

Supply and fixing in repair brass chromium plated kitchen sink waste coupling comperising of four parts CP brass kitchen sink strainer & basket, rubber gasket, PTMT locknut, PTMT strainer sleeve with 32mm outlet and check of any dia as per site requirement complete all as specified and directed.

S&F in repair 25mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 sqm but n exc 4.0 sqm each complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n exc 1.5 sqm each complete all as specified and directed.

Taking down Shutters of any description exc 1 sq m but n exc 2 sqm each complete all as specified and directed

Taking down and refixing Shutters in same opening after adjusting the size, of any description exc 1 sq m but n exc 2 sqm each complete all as specified and directed

M&L for Pressed steel frames for doors of size 125 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed

S&F 2nd class hard wood Transomes or mullions, straight, for solid frames of any description, wrought, framed, double rebated on the solid, rounded or chamfered (including weathering to transome, if required put together with glue, pinned at joints), complete all as specified and directed.

S&F 35mm thick second class hard wood factory made, plain framed panelled door shutter (any number of panels) with panel of 9mm thick BWP commercial plywood or 12mm thick veneered particle board medium dencity, wood partical board with commercial face veneers. The size of members of shutters shall be as specified in section 8 clause 8.20 (a) of SSR Part-I 1991 complete all as specified and directed

S&F 35mm thick second class hard wood factory made glazed and Skelton door shutter open rebated and prepared to receive glass or gauge etc divided into square with plain chamfered or rounded, mitred and rebated sash bars any number complete all as specified and as directed. Note: - Size of member of shutters as specified in SSR Part-I 1991 section 8 clause 8.24 (a) complete all as specified and directed

S&F 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed

S&F solid PVC door frame(approved color) of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, fixing in opening as per specification and drawing complete all as specified and directed.

S&F Factory made solid panel PVC door shutter(approved color and pattern) 30mm thick (stiles) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap inserted for top rail and bottom rail. Penelling of plain colour PVC sheet to be fitted to the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing in the frame at site complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with screws etc complete complete all as specified and directed

S&F 16-17mm thick Prelaminated particle board, interior grade,but prelaminated both sides with decorative choice laminations, fixed to frame work complete all as specified and directed.

S&F 2nd class hard wood plain fillet sq. rect and triangluar in section, wrought secured with sectional area n exc 3 sqcm complete all as specified and directed

S&F 75mm size Hasp and staple, aluminium anodised, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and directed

S & F 30mm Continuous (piano) hinges, mild steel, bright finish or electro galvanised complete all as specified and directed

S&F magnetic catches for cabinets of size 50 mm complete with striking plate & magnetic stud complete all as per approved smaple complete all as specified and directed.

Supply only galvanised mild steel wire clothes 0.46 mm nominal dia of wire and average width of aperture 1.4 mm complete all as specified and as directed . Note : Fixing only rate is included in window/door shutter item considered therein.

S & F 100mm size Butt hinges, medium weight cold rolled, stainless steel and fixed complete all as specified and directed.

S&F Aluminum tower bolts of extruded section of size 150mm complete all as specified and directed.

S&F 100 mm size Extruded aluminium alloy handles, fabricated type., anodised handles complete all as specified and directed.

S&F 150 mm size Extruded aluminium alloy handles, fabricated type., anodised handles complete all as specified and directed.

S&F 300mm size Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed

S&F double body Floor door stopper of aluminium alloy body and tongue, anodised fixed in door shutters complete all as specified and directed.

M & L preparing new wood or wood based surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F in repair Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of tinned tacks, or galvanised wire staples complete all as specified and as directed .

S&F in repairs 100mm size Butt hinges, medium weight cold rolled, stainless steel and fixed complete all as specified and as directed.

S&F in repairs Aluminum tower bolts of extruded section of size 150mm complete all as specified and directed.

S&F 150 mm size Extruded aluminium alloy handles, fabricated type., anodised handles complete all as specified and directed.

S&F in repairs 300mm size Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed

S&F in repairs double body Floor door stopper of aluminium alloy body and tongue, anodised fixed in door shutters complete all as specified and directed.

S&F in repair MS 300 mm, ordinary rat tail rod pattern springs including roller and roller plate fixed to steel frame by welding complete complete all as specified and directed.

S&F in repair SS kitchen plate rack made out of 1mm thick sheet of type SS 304 grade of size 900x600mm of best quality of approved make complete all as specified and directed.

M&L 20 mm thick Granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window- cills,cooking platforms, working table and like over 20 mm thick screed bed or bedding layer in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed

Dismantling wrought iron or mild steel work of any description not otherwise described for of any description complete all as specified and directed.

Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed

S&F Mild steel, plain, black sheet 1.25mm in hearths; covering to door shutters; covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed, holes unched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required complete all as specified and directed

M&L for hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters complete all as specified and directed;

M&L for preparation of new steel surfaces over 10cm width or girth of any description and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed

Hacking out old broken glass of ( any thickness, size or quality from wooden or metal frame glazed with putty or beads/cleat complete all as specified and directed

S&F 3mm thick figured glass with oil putty and glazing clips (min two nos each pane), plain ordinary quality not exc 0.5sqm in each pane complete all as specified and directed.

S&F 3mm thick sheet glass with oil putty and glazing clips (min two nos each pane), plain ordinary quality n exc. 0.5sqm in each pane complete all as specified and directed.

Taking down cement plaster from brick or concrete surface incl raking out joints hacking for key and scrubbing down with water complete all as specified and directed.

M&L for rendering 10 mm thick on brick or concrete surfaces or surface other than fair faces of brick work in cement plaster 1:6, finished even and smooth w/o using extra cement complete all as specified and directed.

M&L for preparing of newly plastered surface of walls and applying one layer of white putty and two coats of oil bound distemper over a coat of compatible primer etc complete all as specified and directed.

M&L for rendering 15 mm thick in two layers over brick work or concrete surfaces, 10mm thick in cement plaster 1:4 backing coat and 5mm thick in cement plaster 1: 4 mixed with WPC complete all as specified and directed. Note: WPC shall be measured and paid separately under relevant item.

M&L for preparation of newly plastered or unplastered surfaces in walls soffits, facia, chajjas and applying two coat of exterior weather proof water based emulsion over a coat of compatible primer complete all as specified and directed.

PADAMSHRI CONSTRUCTION CO

Samaksh Enterprises

OBED AHMED SIDDIQUI

MODI CORPORATION

M/s H V Infra Projects

SHIV SHANKAR MISHRA