SPL REPAIR TO INTERNAL ROADS ALONG WITH ROAD SIDE FURNITURE AT VARIOUS LOCATIONS UNDER GE (EAST) AGRA

Amount

M&L for repairs to pot holes of any depth, n. exc. 1 sqm each including sweeping free from dust and mud or water, scoring sunken portion of roads path etc by cutting around edges to at least 25 mm in depth, making good by filling in screened and graded road metal, watering and well ramming (incl supply of road metal) complete all as specified and directed at site.

M&L for preparation existing black top surface by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally the cleaned surfaces with gunny bags to remove all loose dirt etc & applying evenly a primer tack coat with bituminous primer using paving bitumen VG-30 @ 5 Kg per 10 Sqm for laying premixed bituminous macadam premix carpet complete all as specified and directed.

M&L for applying evenly a priming / tack coat with bituminous primer (paving bitumen VG-10) @ 10 kg per 10 sqm over the prepared surfaces by mechanical sprayer complete all as specified and directed.

M&L for laying bituminous premix semi dense asphaltic concrete with using mechanical paver 30 mm thick consolidated thickness with using 5.5% binder content by weight of total mix, (Paving bitumen VG-30) rolled and compacted with 8 to 10 tonnes power road roller to required camber and gradient complete all as specified and directed. Note :- (a) Premix concrete shall be mixed in hot plant, transported from plant to work site and laid / spread by means of mechanical paver. (b) Contractor shall quote his rate on this basis of binder as mentioned in above item if there is any variation in the actual binder content used, the rate shall be adjusted lower side of binder used however no price adjustment shall be made if the binder content works out to more than as specified in Sch 'A' / BOQ

M&L for preparation of road surface and applying thermoplastic reflective paint for marking of minimum 2.5 mm thick single coat as a centre line or edge line etc, road marking of 150/100 mm width using "HOT MARK" thermo plastic paint (Hot application) white / yellow by indigenous modern propelled road marking machine as directed including all ingredients such as binder, glass beads, titanium dioxide, calcuim carbonate, inter filler etc, thermoplastic requirement for glass beads shall be confiming to BS-6086 of MOST/OSCAR specification including spraying of glass beads etc complete all as per manufacturer's instructions specified and as directed.

Manufacturing, supplying and fixing in repair retro reflective mandatory regulatory sign boards of 900 mm diametre with support length of 3750 mm and made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type head activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc as per IRC : 67 : 2001, pasted on substrate by an dhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of MS angle iron of size 25 x 25 x 3 mm along with theft resistant measures, mounted and fixed with 2 Nos M.S angles of size 35 x 35 x 5 complete all as specified and directed.

Supply and fixing in repair cat eye solar reflective type of metal body alloy of size 100 mm x 100 mm x 20 mm with PAMA striplens reflector of model No. DA 972.0 fixed with and including MS stud of suitable size as per manufactures instructions complete all as specified and directed.

Supply and fix in repair cat eye aluminium alloy shall (100% water proofing design according to 65) of size 125 mm x 125 mm x 25 mm (shank 65 mm) of high efficiency mono rystafie solar panel 2.4 V / 0.3 watt one Nied rechargeable battery (1.2 V / 1600 MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc complete all as specified and directed.

Supply and fixing in repair metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection incuding embedding in PCC 1:2:4 (150 x 150 x 300 mm) type B-1 complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc. 15 cm thickness (below or above ground level) complete all as specified and directed.

Dismantling stone slab and tiles of any description or thickness in floors / dados laid, dry and pointed in any mortar and removing the same to out side MD land complete all as specified and directed.

M&L for PCC 1:2:4, type B-1 (using 20 mm graded stone aggregate) moulded precast kerb stone of size as directed including jointed, pointed in cement mortar 1:4 embeding in the ground to a depth as indicated, taping earth around kerb stone including necessry excavation & earth work and also removing surplus soil etc complete all as specified and directed.

M&L 50 mm thick cement concrete (1:2:4) type B-2 (using 40 mm graded stone aggregate) as in path finishing cement concrete surface even and smooth without using extra cement, spike rolling to surfaces or making impressions of expanded metal, white the concrete is green complete all as specified and directed.

S&F chequred cement concrete tiles 30 cm x 30 cm x 20 mm thick set, jointed and pointed in neat cement slurry in floors with grey cement and no pigments including 20 mm thick screed bed or bedding layers in cement and sand mortar 1:6 for laying floor finishes complete all as specified and directed.

M&L for moorum / red bajri filling in road berms /floor / pavingslaid in layers n. exc. 15 cm thick spread leveled and rammed including watering and all ramming to the required level of surface complete all as specified and directed.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for 60 mm thick precast PCC interlocking coloured paver rubber moulded block factory made of grade M-35 single layer monolithic high densiy manufactured by electro vibro hydraulically operated block making maching conforming to IS -15658-2006 laid and jointed over and including 25 mm thick sand cushion layer complete all as specified and directed.

M/s Salim Mohomad

C P Singh and Co

Rahul Construction Co

Attar Singh and Sons

M/s D AND R CONSTRUCTION AND SUPPIERS