White washing, Painting, Providing and Fixing vitrified tiles, Railing Stair case and other Misc. work in Inspection Hut at RD 59500 of WJC Main Branch

Amount

Works Details

Earth work excavation in Foundation, Trenches etc. in all kind of soils, not exceeding 2 mtrs. Depth including dressing of bottom and sides of trenches etc. including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-incharge , as per approved drawing/ design supplied by the department & as per PWD specifications. HSR item No. 6.6

Cement Concrete 1:2:4 with stone aggregate 20mm nominal size in foundation and plinth including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-incharge, as per approved drawing/ design supplied by the department & as per PWD specifications. HSR item No.10.41

Cement Concrete 1:2:4 with stone aggregate 20mm nominal size in for reinforced concrete work in shelves excluding steel reinforcement but including centering and shuttering, laid in position including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-incharge, as per approved drawing/ design supplied by the department & as per PWD specifications. HSR item No.10.81

Top Khurra 0.6mm x0.6mm for rain water pipe 1:2:4 over 50 mm fix cement conc. 1:8:16 including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-incharge , as per approved drawing/ design supplied by the department & as per PWD specifications. HSR item No.13.50

Bottom Khurra on ground 1.2 mtr x 0.6m consisting of brick on edge laid in cement mortar 1:3 over 75 mm cement Conc. 1:8:16 including 12mm fix cement plaster 1:3 including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-incharge , as per approved drawing/ design supplied by the department & as per PWD specifications. HSR Item No. 13.57

1st class Brick Work laid in Cement Sand Mortar 1:4 in F&P including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-incharge, as per approved drawing/ design supplied by the department & as per PWD specifications. HSR item No.11.4

Sand filling under floor and in wells of bridge foundation including handling within 100 metre upto plinth level including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-incharge , as per approved drawing/ design supplied by the department & as per PWD specifications. (N.S. Item).

Pressed steel sheet frame chowkhat consisting of 2 mm thick door and window frame of size 127mm x 50 mm with 40 mm wide double rebate including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-incharge , as per approved drawing/ design supplied by the department & as per PWD specifications. HSR item No.18.34 (a)

1st class Brick Work laid in Cement Sand Mortar 1:4 in 1st storey upto 4 mtr above plinth level including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-incharge, as per approved drawing/ design supplied by the department & as per PWD specifications. HSR item No.11.9

Fe-500 EQR TMT steel bars RCC work where not included in the complete rate of RCC including bending, binding and placing in position including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-incharge, as per approved drawing/ design supplied by the department & as per PWD specifications. HSR item No. 18.22

Cement Concrete 1:1.5:3 with stone aggregate 20mm nominal size for reinforced concrete work but excluding steel reinforcement centering & shuttering in 1st storey upto 4 Mtr. above plinth level including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-incharge, as per approved drawing/ design supplied by the department & as per PWD specifications. HSR Item No.10.80+10.95

Tile terracing consisting of tiles 2.86x11.43x 3.81cm laid over 87.50mm mud filling on a layer of 25mm mud plaster and another layer of mud mortar for laying tiles including two coat of bitumen laid hot at 1.65kg per sqm on top of RCC slab including grouting with cement sand mortar 1:3 and top surface to be left clean including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-incharge, as per approved drawing/ design supplied by the department & as per PWD specifications. HSR item No.13.13

Cement plaster 12mm thick C.M. 1:4 including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-incharge, as per approved drawing/ design supplied by the department & as per PWD specifications. HSR item No. 15.5

Providing & laying average 6mm thick POP coating on walls, ceiling, beams & lintels including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-incharge , as per approved drawing/ design supplied by the department & as per PWD specifications. HSR Item No. 13.94

Centring and shuttering for main slab Culverts including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-incharge , as per approved drawing/ design supplied by the department & as per PWD specifications. HSR item No.9.18 (b)

Providing and applying two coat white cement based putty or plastered surface and griding the face smooth with sand paper to get an even and smooth finish including cost & carriage of all material, labour charges, scaffolding, Sundries etc. (J.K./Birla make) including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-incharge , as per approved drawing/ design supplied by the department & as per PWD specifications. HSR Item No. 16.81

Applying priming coat with cement primer in all shades on newly plaster or exterior concrete surfaces including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-incharge , as per approved drawing/ design supplied by the department & as per PWD specifications. HSR Item No. 16.25

Painting two coats with ready mixed emulsion paint all shades for interior use on bricks, plaster, cement, fibreboar etc. including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-incharge , as per approved drawing/ design supplied by the department & as per PWD specifications. HSR item No. 16.27

Providing Two coats of exterior acrylic emulusion painting including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-incharge , as per approved drawing/ design supplied by the department & as per PWD specifications. HSR item No.16.79 (a)

Providing & fixing vitrified tiles of 600x600mm of approved make in flooring laid in any pattern as specified over base of 20mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of tiles including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-incharge , as per approved drawing/ design supplied by the department & as per PWD specifications. HSR item No.14.89.

Providing & fixing tiles of 600x600mm of approved make in skirting / Dado laid in any pattern as specified over base of 12mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of tiles including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-incharge , as per approved drawing/ design supplied by the department & as per PWD specifications. HSR item No.14.90.

Providing & fixing ceramic tiles/ anti skid tile size of 400x400mm or above size of approved make in flooring laid in any pattern as specified over base of 20mm thick cement coarse sand mortar 1:3 & jointed with white cement slurry mixed with pigment match the shade of tiles including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-incharge , as per approved drawing/ design supplied by the department & as per PWD specifications. HSR item No. 14.91.

Providing & fixing 1st Quality ceramic glazed wall tiles of approved make in all colour shade Burgundy, Bottom Green, Black of any size of approved by Engineer-in-Chief in skirting, Rizer of stapes and Dados over 12mm thick Bed of Cement Mortor 1:3 and jointed with white cement slurry mixed with pigment of matching shades complete including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-incharge , as per approved drawing/ design supplied by the department & as per PWD specifications. HSR item No.14.92 (a).

Factory manufactured panelled door sutter of commercial hard wood, such as hollock, champ, chikrassy chaplash,etc kiln seasoned, as per I.S. Specification No 1003 with 100 mm wide vertical style, 150 mm wide lock rail, 200mm wide bottom rail and 100 mm wide other rails, with panels of 12 mm thick vineered , particle board or plywood of BWR grade hot pressed including cost of iron hinges, screws, chocks/cleats, stopes and nails etc., complete fixed in position including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-incharge , as per approved drawing/ design supplied by the department & as per PWD specifications. HSR Item No. 17.91 (b)

Factory manufactured wire gauze door and windoew sutter of commercial hard wood, such as hollock, champ, chikrassy chaplash,etc kiln seasoned, as per I.S. Specification No 1003 with 100 mm wide vertical style, 150 mm wide lock rail, 200mm wide bottom rail and wire gauze of 140G or 120G esignation including cost of iron hinges, screws, chocks/cleats, stopes and nails etc., complete fixed in position including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-incharge , as per approved drawing/ design supplied by the department & as per PWD specifications. HSR Item No. 17.92 (ii)

Applying Pink Primer or Aluminium primer on wood work including preparation of surface knoting and stoping etc. including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-incharge , as per approved drawing/ design supplied by the department & as per PWD specifications. HSR Item No. 16.2

Painting Two Coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metalic or plastered or concrete surfaces to give an even shade including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-incharge , as per approved drawing/ design supplied by the department & as per PWD specifications. HSR Item No.16.3

Wrought iron and mild steel ladders grills, grating frames, window guards, iron doors openable or fixed staircase or parapet or any type of railing, gates and tree guards etc., including cpost of screws and welding rods and bolts and nuts complete fixed in position including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-incharge , as per approved drawing/ design supplied by the department & as per PWD specifications. HSR item No. 18.12

Providing & fixing of stainless steel railing of 304 grade in stairs & parapets including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-incharge , as per approved drawing/ design supplied by the department & as per PWD specifications. (NS Item)

Applying priming coat on steel work consisting of genuine red lead mixed with linsed oil and terpentine oil in equal proportion including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-incharge , as per approved drawing/ design supplied by the department & as per PWD specifications. HSR Item No.16.10.

Painting two coat excluding priming coat with ready mixed paint for metalic surfaces in all shades on new steel or iron work including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-incharge , as per approved drawing/ design supplied by the department & as per PWD specifications. HSR item No. 16.17 (with 2nd quality).

Providing and fixing commercial type block board ,plain flat pressed single or three layer particle board (19mm) including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-incharge , as per approved drawing/ design supplied by the department & as per PWD specifications. HSR 17.49 (b)

Wire gauge fixed on Chowkats with 25mm thick cover moulding including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-incharge , as per approved drawing/ design supplied by the department & as per PWD specifications. HSR item No.17.33

Providing and laying 80mm thick ISI marked interlocking paver Blocks of all Shapes and Colours in Design Mix Cement M-40 Over a Bed of 30mm thick fine sand including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-incharge , as per approved drawing/ design supplied by the department & as per PWD specifications. HSR item No.10.159

Labour for laying, jointing, fixing and testing GI / PVC / WI Pipe Lines and special Tees, Bends socket etc. inside building including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-incharge , as per approved drawing/ design supplied by the department & as per PWD specifications. HSR item No.28.18 (b), i (15mm dia)

Labour for laying, jointing, fixing and testing GI / PVC / WI Pipe Lines and special Tees, Bends socket etc. inside building including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-incharge , as per approved drawing/ design supplied by the department & as per PWD specifications. HSR item No.28.18 (b), ii (20mm dia)

Providing & fixing in position best Indian make (ordinary) lavatory suites (with fall anti spsplushrim in vitreous chinaware and all other necessary fitting as fully described including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-incharge , as per approved drawing/ design supplied by the department & as per PWD specifications. HSR item No. 30.42 Single color (ii) (530x430mm)

Providing & fixing 15mm dia CP Brass bib cock of best quality long body including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-incharge , as per approved drawing/ design supplied by the department & as per PWD specifications. HSR item No.30.75 (a)

Providing & fixing 15mm dia CP Brass bib cock of best quality including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-incharge , as per approved drawing/ design supplied by the department & as per PWD specifications. HSR item No.30.75 (c)

Providing and fixing in position C.P. brass stop cock(as approved by Engineer-in-charge) including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-incharge , as per approved drawing/ design supplied by the department & as per PWD specifications. HSR item No.30.76 (a)(i)

Providing and fixing in position best Indian make flexible tube connection including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-incharge , as per approved drawing/ design supplied by the department & as per PWD specifications. HSR item No.30.82(b)(i). (CP Brass 15mmx300mm)

Providing & fixing HDPE Water Storage Tank of Sintax, Diplast with covers / lid mark with IS 12701 on Roof top on of Building. (1000 Ltr. Capacity) including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-incharge , as per approved drawing/ design supplied by the department & as per PWD specifications. HSR Item No.30.119

Providing and fixing in position automatic brass ball valves in tanks including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-incharge , as per approved drawing/ design supplied by the department & as per PWD specifications. HSR item No.30.110 (a)(ii). (20mm dia with Copper ball).

Providing and fixing in position PVC waste pipe including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-incharge, as per approved drawing/ design supplied by the department & as per PWD specifications. (NS item)

Providing and fixing PVC rain water pipe 6 kg pressure ISI mark including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-incharge , as per approved drawing/ design supplied by the department & as per PWD specifications. HSR item No. 13.89(a) (100mm dia PVC pipe)

Providing and fixing PVC bend ISI mark including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-incharge, as per approved drawing/ design supplied by the department & as per PWD specifications. HSR item No.13.90(a) (100mm dia PVC Bend)

Providing and fixing sliding bolt with nuts and screws,etc. including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-incharge , as per approved drawing/ design supplied by the department & as per PWD specifications. HSR item No.17.83 (a ) (i)

Providing and fixing, 150 mm hasps and staples with necessary screws, etc. including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-incharge , as per approved drawing/ design supplied by the department & as per PWD specifications. HSR item No.17.78 (a).

Providing and fixing, helical door spring 150 mm (superior quality), including necessary screws including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-incharge, as per approved drawing/ design supplied by the department & as per PWD specifications. HSR item No.17.79 (b).

Laying and fixing Granite Stone in all shades 15 mm to 18mm thick including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-incharge , as per approved drawing/ design supplied by the department & as per PWD specifications. HSR item No.14.96

Providing and Fixing Fibre shed with M.S. Iron & Fibre sheets including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-incharge , as per approved drawing/ design supplied by the department & as per PWD specifications. (NS item)

Extra over item No. 30.1 to 30.4 and 30.6 for providing and fixing 15 litres capacity low level vitreous china ware cistern complete with flush bend all other necessary fitting instead of C.I. high level cistern complete with fittings including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-incharge, as per approved drawing/ design supplied by the department & as per PWD specifications. HSR item No.30.12 (i)

Providing & fixing in position best Indian make (as approved by the Engineer-in-Charge) European type water closet suite, syphonic type consisting of- including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-incharge , as per approved drawing/ design supplied by the department & as per PWD specifications. HSR item No.30.5 (a) (ii)

Extra over item no. 30.3 to 30.6 for providing and fixing best Indian make plastic hygenic seat with lid complete instead of hollow black or white plastic seat and lid including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-incharge , as per approved drawing/ design supplied by the department & as per PWD specifications. HSR item No.30.13 (i)

Providing and fixing in position Jet connection including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-incharge, as per approved drawing/ design supplied by the department & as per PWD specifications. (NS item)

Dismantling Cement concrete 1:2:4 Plain including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-incharge, as per approved drawing/ design supplied by the department & as per PWD specifications. HSR Item No.8.6 (d)

Supply and erection of mild steel pipe pole 10cm dia, 3.25mm thick welded with M.S. base plate of size 30cmx30cmx6.0mm thick pole fitted with pole mounting bracket 2mm thick 1.5mtrs long including erection of pole in ground, surrounded with 30cm dia of 1:3:6 cement concrete and plate from 10cm thick to size of base plate at bottom including painting including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-incharge , as per approved drawing/ design supplied by the department & as per PWD specifications. HSR Item No. 31.30(ii)

Providing and fixing 6 layers brass 10 cm Mortice latch and lock and a pair of lever handles wityh necesarry screw including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-incharge , as per approved drawing/ design supplied by the department & as per PWD specifications. HSR Item No.17.73

Cost of brass fittings complete for doors and windows such as tower bolt, handles etc and screws for these fittings (excluding sliding bolt) including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-incharge, as per approved drawing/ design supplied by the department & as per PWD specifications. HSR Item No.17.70

Supply and fixing hydraulic door closure I.S.I. Mark with necessary screws etc complete I.S.I. Designation No. III size of door 851mm to 1000mm including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-incharge, as per approved drawing/ design supplied by the department & as per PWD specifications. HSR item No.17.82 (c)