Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.9 LAccepted-AOC A 63 ELDECO COUNTY PHASE II RAJGARH JHANSI U P 284135 | JHANSI | JHANSI | UTTAR PRADESH | 284135 | L1 | Accepted-AOC Being L1 bidder | |
| 2 | L2₹26.0 L+₹2.6 L (10.9%)Rejected-Finance | L2 | Rejected-Finance not become lowest bidder | |
| 3 | L3₹26.2 L+₹2.8 L (11.8%)Rejected-Finance | L3 | Rejected-Finance not become lowest bidder | |
| 4 | L4₹30.2 L+₹6.7 L (28.5%)Rejected-Finance 840 1B MADHUR VIHAR COLONY CIVIL LINES JHANSI UP 284 001 | JHANSI | JHANSI | UTTAR PRADESH | 284001 | L4 | Rejected-Finance not become lowest bidder | |
| 5 | L5₹35.4 L+₹11.9 L (50.8%)Rejected-Finance 4201 NAGLA PRITHVI NATH SHAHGANJ AGRA 282010 | AGRA | AGRA | UTTAR PRADESH | 282010 | L5 | Rejected-Finance not become lowest bidder |
Tender Value
₹39.5 L
EMD Value
₹79,100
Closing Date
18 Feb 2023, 6:00 pmClosed
Major Sunny Kumar Attri
Garrison Engineer Jhansi
REPAIR/MAINT, RECANING AND PAINTING OF VARIOUS WOODEN/STEEL FURNITURE ITEMS AT BSO SUB DIVN, APS AND MIL STN NOWGONG UNDER GE JHANSI
2023_MES_575691_1
GE/JHA/TOK/72 OF 2022-23
Open Tender
Civil Works
Item Rate
180 days
GE Jhansi
As per NIT and Tender Documents
9 documents required · 9 mandatory
₹500
Yes
GE Jhansi
₹79,100
Yes
20 Mar 2023
18 Jan 2023
20 Feb 2023
18 Jan 2023
18 Feb 2023
1 Feb 2023
18 Jan 2023 - 25 Jan 2023
Amount
Recanning of all type chairs :- (a) M&L for recanning of chairs and other furniture with white, half round plastic cane, 2 mm wide and 0.3 mm thick, weaving shall be done as per Godrej Pattern (Plastic cane shall be of Make: as approved by GE/Engineer-in-charge) complete all as specified in drawing and directed. Note - Chair dinning 0.39x0.39=0.1521, Chair writiing-0.43x0.47=0.2021,Chair easy seat-0.51x0.44=0.2244 & back-0.41x0.32=0.1321
(b) Minor repairing of various type of wooden chair including tightening of frame with bamboo pins and fevicol complete all as shown in drawing and as directed by GE/Engineer-in-charge.
(c) M&L for polishing of chair dinning with high class french/ sprit polish till glossy finish is obtained complete all as specified in drawing and directed.
(d) M&L for polishing of chair writting with high class french/ sprit polish till glossy finish is obtained complete all as specified in drawing and directed.
(e) M&L for polishing of chair easy with high class french/ sprit polish till glossy finish is obtained complete all as specified in drawing and directed.
Table Dining 6 Pers
(a) Removing of old unserviceable top from table dining 6 pers and S&F new top of size 1500 x 900 mm of 18 mm thick of prelaminated particle board (Exterior grade) with 4 mm thick Ist class hard wood (teak wood) beading fixed with nails including french polishing to beading complete all as specified in drawingand directed.
(b) Removing of old broken/unserviceable side short rail of table dining 6 pers and S&F new side short/long rail made of Ist class hard wood (teak wood) as per shape and size shown in drawing including french polishing to match the other parts complete all as specified in drawing and directed.
(c) Removing of old broken/unserviceable side long rail of table dining 6 pers and S&F new side short/long rail made of Ist class hard wood (teak wood) as per shape and size shown in drawing including french polishing to match the other parts complete all as specified in drawing and directed.
(d) Removing old broken/unserviceable legs from table dining 6 pers and S&F new legs made of Ist class hard wood (teak wood) including 04 Nos PVC Shoes as per shape and size shown in drawing including french polishing to match other parts complete all as specified in drawing and directed.
(e) S&F wooden bracket 8 Nos in each table dining between each corners fixing with suitable screws all as specified in drawings & directed .
(f) Preparation of surfaces of table dining 6 person by applying one set coat and making the surface plain by scraping with fine sand paper and polishing two coats of french/sprit polish on exposed surface to achieve high class finish, complete all as specified in drawings & directed .
Table Peg (450 x 300 mm)
(a) Removing old unserviceable top from table peg and S&F new top of size 450 x 300 mm & 18 mm thick of prelaminated particle board (Exterior grade) with 4 mm thick Ist class hard wood (teak wood) beading fixed with nails as per shape and size shown in drawing including french polishing to beading complete all as specified in drawings & directed .
(b) Removing old broken/unserviceable side short rail of table peg and S&F new side short/long rail of Ist class hard wood(teak wood) as per shape and size shown in drawing including french polishing to match the other parts complete all as specified in drawings & directed .
(c) Removing old broken/unserviceable side long rail of table peg and S&F new side short/long rail of Ist class hard wood(teak wood) as per shape and size shown in drawing including french polishing to match the other parts complete all as specified in drawings & directed .
(d) Removing old broken/unserviceable legs of table peg and S&F new legs including 04 Nos PVC shoes of Ist class hard wood (teak wood) as per shape and size shown in drawing including french polishing to match the other parts complete all as specified in drawings & directed .
(e) S&F wooden bracket 8 Nos in each between each corners fixing with suitable screws complete all as specified in drawings & directed .
(f) Preparation of surfaces of Table peg by applying one set coat and making the surface plain by scraping with fine sand paper and polishing two coats of french/sprit polish on exposed surface to achieve high class finish, complete all as specified in drawings & directed .
Teapoy (600 x 450 mm)
(a) Removing old unserviceable top from teapoy and S&F new top of size 600 x 450 mm of 18 mm thick of prelaminated particle board (Exterior grade) with 4 mm thick Ist class hard wood (teak wood) beading fixed with nails as per shape and size shown in drawing including french polishing to beading complete all as specified in drawings & directed .
(b) Removing old broken/unserviceable side short rail of teapoy and S&F new side short/long rail of Ist class hard wood (teak wood) as per shape and size shown in drawing including french polishing to match the other parts complete all as specified in drawings & directed .
(c) Removing old broken/unserviceable side long rail of teapoy and S&F new side short/long rail of Ist class hard wood (teak wood) as per shape and size shown in drawing including french polishing to match the other parts complete all as specified in drawings & directed .
(d) Removing old broken/unserviceable legs from teapoy and S&F new legs of Ist class hard wood (teak wood) including 04 nos PVC shoes as per shape and size shown in drawing including french polishing to match the other parts complete all as specified in drawings & directed .
(e) S&F wooden bracket 8 Nos in each between each corners fixing with suitable screws complete all as specified in drawings & directed .
(f) Removing old broken/unserviceable centre stiffner from teapoy and S&F new stiffner of Ist class hard wood (teak wood) as per shape and size shown in drawing including french polishing to match the other parts complete all as specified in drawings & directed .
(g) Removing old broken/unserviceable side stiffner from teapoy and S&F new stiffner of Ist class hard wood (teak wood) as per shape and size shown in drawing including french polishing to match the other parts complete all as specified in drawings & directed .
(h) Preparation of surfaces of Teapoy by applying one set coat and making the surface plain by scraping with fine sand paper and polishing two coats of french/sprit polish on exposed surface to achieve high class finish, complete all as specified in drawings & directed .
Table 3' x 2' with or without drawer
(a) Removing old unserviceable top from table and S&F new top of prelaminated particle board (Exterior grade) with 4 mm thick Ist class hard wood (teak wood) beading fixed with nails including french polishing to beading complete all as specified in drawings & directed .
(b) Removing old broken/unserviceable side short rail of table and S&F new side short rail of Ist class hard wood (teak wood) as per shape and size shown in drawing including french polishing to match the other parts complete all as specified in drawings & directed .
(c) Removing old broken/unserviceable side long rail of table and S&F new side long rail of Ist class hard wood (teak wood) as per shape and size shown in drawing including french polishing to match the other parts complete all as specified in drawings & directed .
(d) Removing old broken/unserviceable legs from table and S&F new legs of Ist class hard wood (teak wood) including 04 Nos PVC shoes as per shape and size shown in drawing including french polishing to match the other parts complete all as specified in drawings & directed .
(e) Removing old broken/unserviceable drawer from table and S&F new drawer as per sample, shape and size shown in drawing including french polishing to match the other parts complete all as specified in drawings & directed .
(f) S&F wooden bracket 8 Nos in each between each corners fixing with suitable screws complete all as specified in drawings & directed .
(g) Removing old broken/unserviceable centre stiffner from and S&F new stiffner of Ist class hard wood (teak wood) as per shape and size shown in drawing including french polishing to match the other parts complete all as specified in drawings & directed .
(h) Removing old broken/unserviceable side stiffner from and S&F new stiffner of Ist class hard wood (teak wood) as per shape and size shown in drawing including french polishing to match the other parts complete all as specified in drawings & directed .
(j) Preparation of surfaces of Table 3'x2' with drawer by applying one set coat and making the surface plain by scraping with fine sand paper and polishing two coats of french/sprit polish on exposed surface to achieve high class finish, complete all as specified in drawings & directed .
(k) Preparation of surfaces of Table 3'x2' w/o drawer by applying one set coat and making the surface plain by scraping with fine sand paper and polishing two coats of french/sprit polish on exposed surface to achieve high class finish, complete all as specified in drawings & directed .
Sofa set 4/5 seater
(a) Removing of old cushion of size 21 x 22 inchs & 4 inchs thick from sofa set and replacing foam cushion of sofa set five seater with new PU foam cushion of 40 density (make: Sleepwell/Kurlon and cushion shall be covered with cotton tapesty cloth of range not less than Rs.350.00 per meter, colour, shade and quality of tapesty shall be as approved by GE complete all as specified in drawings & directed .
(b) Preparation of surfaces of sofa set 5 seater by applying one set coat and making the surface plain by scraping with fine sand paper and polishing two coats of french/sprit polish on exposed surface to achieve high class finish, complete all as specified in drawings & directed .
(c) Preparation of surfaces of sofa set 4 seater by applying one set coat and making the surface plain by scraping with fine sand paper and polishing two coats of french/sprit polish on exposed surface to achieve high class finish, complete all as specified in drawings & directed .
(d) Minor repairing of various sofa set 4/5 seater including tightening of frame with bamboo pins and fevicol complete all as shown in drawing and as directed by GE/Engineer-in-charge.
Bed Hard ply top/Bed Newar
(a) Taking down the existing unserviceable ply wood from the existing head rest of Bed Hard/Bed Newar and S & F new plywood 3.5 mm thick teak faced including teak wood beeding 4 mm thick as per shape and size shown in drawing and fixed with nails including french polishing to ply & beeding complete all as specified in drawings & directed .
(b) Taking down the existing unserviceable ply wood from the existing foot rest of Bed Hard/Bed Newar and S & F new plywood 3.5 mm thick teak faced including teak wood beeding 4 mm thick as per shape and size shown in drawing and fixed with nails including french polishing to ply & beeding complete all as specified in drawings & directed .
(c) Taking down the existing broken unserviceable side long rail from Bed Hard/Bed Newar and S & F new side long rail of teak wood (Ist class) mm including french polishing with high class finish complete all as specified in drawings & directed .
(d) Taking down existing unserviceable ply top/newar from the Bed Hard/bed newar and S&F new ply top 12 mm thick, BWP grade complete all as specified in drawings & directed .
(e) Taking down the existing unserviceable broken legs of Bed Hard and S&F new legs of Ist class teak wood including 04 Nos PVC shoes at the bottom of each leg as per shape and size shown in drawing including french polishing complete all as specified in drawings & directed .
(f) S&F wooden bracket 8 Nos in each between each corners fixing with suitable screws complete all as specified in drawings & directed .
(g) Preparation of surfaces of Bed hard/Bed newar by applying one set coat and making the surface plain by scraping with fine sand paper and polishing two coats of french polish on exposed surface to achieve high class finish, complete all as specified in drawings & directed .
Chair dining MAP
(a) Removing old broken/unserviceable front legs from chair dining and S&F new front legs of Ist class hard wood (teak wood) including 04 Nos PVC shoes at the bottom of each leg as per shape and size shown in drawing complete all as specified and directed.
(b) Removing old broken/unserviceable rear legs from chair dining and S&F new rear legs of Ist class hard wood (teak wood) including 04 Nos PVC shoes at the bottom of each leg as per shape and size shown in drawing complete all as specified and directed.
(c) Removing old broken/unserviceable side rail from chair dining and S&F new side rail of Ist class hard wood (teak wood) as per shape and size shown in drawing complete all as specified and directed.
(d) Removing old broken/unserviceable front rail from chair dining and S&F new front rail of Ist class hard wood (teak wood) as per shape and size shown in drawing complete all as specified and directed.
(e) Removing old broken/unserviceable back rest from chair dining and S&F new back rest of Ist class hard wood (teak wood) as per shape and size shown in drawing complete all as specified and directed.
(f) Removing old broken/unserviceable centre stiffiner from chair dining and S&F new stiffiner of Ist class hard wood (teak wood) as per shape and size shown in drawing complete all as specified and directed.
(g) Removing old broken/unserviceable side stiffiner from chair dining and S&F new stiffiner of Ist class hard wood (teak wood) as per shape and size shown in drawing complete all as specified and directed.
(h) S&F wooden bracket 8 Nos in each between each corners fixing with suitable screws all as specified in drawings & directed .
(i) Removing old unserviceable foam from chair dining and replacing from 75 mm thick ,32 density with new PU foam of make: Sleepwell/Kurlon from seat of chair dining and foam shall be covered with cotton tapesty cloth of range not less than Rs. 350.00 per meter, colour, shade and quality of tapesty shall be as approved by GE complete all as specified and directed.
(j) M&L for polishing all repaired chairs with high class french polish till glossy finish is obtained complete all as specified and directed.
Table writing
(a) Removing old unserviceable top from table writing and S&F new top as per shape and size shown in drawing of 18 mm thick of prelaminated partical board exterior grade type -II melamine face as per IS-3087, top of teack face and white laminated on other side with 4 mm thickIst class hard wood(teak wood) beading fixed with nailsincluding frenchpolishing to beading complete all as specified and directed.
(b) Removing old broken /unserviceable side short rail of table writing and S&F new side short/ long rail made of Ist class hard wood(teak wood)as per shape and size shown in drawing including french polishing to match the other parts complete all asspecified and directed.
(c ) Removing old broken /unserviceable side long rail of table writing and S&F new side short/long rail made of Ist class hard wood(teak wood) as per shape and size shown in drawing including french polishing to match the other parts complete all as specified and directed.
(d) Removing old broken/unserviceable legs from table writing and S&F new legs made of Ist class hard wood wood (teak wood) including 04 nos PVC shoes as per shape and size shown in drawing includings french polishing to match other parts complete all asspecified and directed
(e) S&F wooden bracket 8 nos in each table writing between each corners fixing with suitable screw all as specified in drawing & directed.
(f) Removing old broken / unserviceable back ply of box from table writing and S&F new back ply made of 6 mm thick commercial ply wood as per shape and size shown in drawing including french polishing to match other parts complete all as specified and directed.
(g) Removing old broken / unserviceable shuter of box from table writing and S&F new shuter made of 18 mm thick prelaminated particle board (Exterior grade) including one nos magnetic catcher & handle in each shutter all as per shape and size shown in drawing.
(h) Removing old broken/unserviceable drawer from table writing and S&F new drawer made of as specified in drawing including one nos handle in each drawer all as per shape and size shown in drawing includings french polishing to match other parts complete all as specified and directed.
(i) Removing old broken /unserviceable centre stiffener from table writing and S&F new centre stiffener made of Ist class teak wood all as specified in drawing includings one nos handle in each drawer all as per shape and size shown in drawing includings french polishing to match other parts complete all as specified and directed.
(j) Removing old broken/ unserviceable side stiffener from table writing and S&F new side stiffener made of Ist class teak wood all as specified in drawings includings french polishings to match other parts
(k) Preparation of surface of table writing by applying one set coat and making the surface plain by scraping with fine sand paper and polishing two coat of french/sprit polishing on exposed surface to achive high class finish complete all as directed.
TV Trolly
(a) Taking down existing unserviceable top[ from TV Trolly and S&F new top shall be off 18 mm thick prelaminated partical board (Exterior grade) edge moulded all around fixed to frame all shown in drawing and as directed.
(b) Taking down existing unserviceable side frame TV trolly and S&F new shall be 18 mm thick prelaminated partical board (Exterior grade) all as shown in drawing and as dirrected
(c ) Removing old unserviceable castor from TV trolly and S&F new sweble type castor as per shape and size complete all as specified and directed
(d) Taking down existing unserviceable /broken shutter glass from TV trolly and S&Fnew shutter glass with 5 mm thick duly revitted to clamp with steel revit with magnetic catcher fixed to frame complete all as shown on drawing and as directed
TABLE CENTRE
(a) Removing old unserviceable top from table centre and S&F new top of size 900x450&18 mm thick of prelaminated particle board (Exterior grade) type- II malemine face as per IS-3087, top of teak face and white laminated on other side with 4 mm thickIst class hard wood (teak wood) beading fixwith nails includings french polishing to beading complete all as specified and directed
(b) Removing of old unserviceable side short rail of table centre and S&F new side short rail of Ist classhard wood(teak wood) as per shape and size shown on drawing includings french polishing to match the other parts complete all as specified and directed
(c ) Removing of old unserviceable side long rail of table centre and S&F new side long rail/short rail of Ist class hard wood(teak wood) as per shape and size shown on drawing includings french polishing to match the other parts complete all mas specified and directed
(d ) Removing old brocken unserviceable legs from table centre and S&F new legof Ist class hard wood(teak wood) including 04 nos PVC shoe as per shape and size shown in drawing includings french polishing to match the other parts.
( e) S&F wooden bracket 08 nos in each between each corner fixing with suitable screw all as specified in drawing & directed
(f) Removing old brocken/unserviceable centre stiffner from and S&F new stiffner of Ist class hard wood (teak wood) as per shape and size shown in drawing includings french polishing to match the other parts complete all as specifiedand directed
(g) Removing old broken side stiffner from S&F new stiffner of Ist class hard wood (Teak wood)as per shape and size shown on drawing including french polishing to match the otherpartscomplete all as specified and directed
(h ) Preparation of surface of table centre by appliying one set coatand making the surface plain by scraping with fine sand paper and and polishing two coats of french polish on exposed surface to achive high class finish, complete all as directed.
TABLE DRESSING GENTS WITH MIRROR
(a) Removing of old broken/ unserviceable looking mirror with frame from the table dressing gents with mirror and S&F new 5 mm thick looking mirror with frame as per sample , shape and size shown in drawing of Make : Atul/Modi complete all as specified and dirrected
(b) Removing of old broken/unserviceable sunmica from the top of table dressing Gents and S&F new 0.8 mm thick sunmica of best quality fixed with fevicol adhesive as per sample, shape and size shown on drawing complete all as specified and directed
(c) Removing old broken unserviceable back side of table dressing Gents and S&F new back side as per shape and size shown on drawing complete all as specifed and directed
(d) Removing the old broken/ unserviceable drawer from table dressing gents and S&F new drawer including PVC knob as per shape and size shown on drawing complete all as specified and directed
(e) Removing old broken/unswerviceable knob from the table dressing Gents and S&F new 40 mm size CP brass knob as per sample, shape and size shown on drawing complete all as specified and directed
(f) Preparation of surface of table dressing Gents by applying one set coat and making the surface plain by scraping with fine sand paper and polishing two coat of french polish on exposed surfce to achive high class finish, complete all as directed
TABLE DRESSING LADIES WITH MIRROR
(a) Removing of old broken/unserviceable looking mirror with frame from the table dressing ladies and S&F new 5 mm thick looking mirror with frame as per sample shape and size shown in drawing of Make - Atul/Modi Complete all as specified and directed
(b) Removing old broken / unserviceable knob from table dressing ladies and S&F new 40 mm size CP brass knob as per sample , shape and size shown in drawing complete all as specified and directed.
(c) Removing old broken/ unserviceable sliding glass from table dressing ladies and S&F new 5 mm thick sheet glass with plastic handle as per sample, shape and size shown in drawing complete all as specified and directed.
(d) Removing old broken legs from table dressing ladies and S&F new legs of Ist class hard wood(teak wood) as per shape and size shown in drawing includings french polishing to match the other parts complete all as specified and directed.
(e) Removing old broken/ unserviceable sunmica from the top of table dressing ladies and S&F new 0.8 mm thick sunmica of best quality fixed with fevicol as per shape and size shown in drawing complete all as specified and directed
(f) Removing old broken/ unserviceable back side of table dressing ladies and S&F new back side as per shape and size shown in drawing complete all as specified and directed
(g) Removing old broken/ unserviceable drawer from the table dressing ladies and S&F new drawer including PVC knob as per shape and size shown in drawing complete all as specified and directed.
(h) Preparation of surface of table dressing ladies by applying one set coat and making the surface plain by scraping with fine sand paperand polishing two coat of french/ sprit polish on exposed surface th achive high class finish, complete all as directed.
SIDE BOARD
(a) Takig down the old broken/ unserviceable top from side board and S&F new top as per shape and size shown in drawing of 18 mm thick of prelaminated partical board exterior grade type -II complete all as specified and directed.
(b) Removing old broken / unserviceable side of side board and S&F new side of Ist class hard wood (teak wood) as per shape and size shown in drawing includings french polishing to match the other parts complete complete all as specified and dirrected.
(c) Removing old broken/ unserviceable back of side board and S&F new back as per shape and size shown in drawing of 6 mm thick commercial ply including french polishing to match the other parts complete all as specified and directed.
(d) Removing old broken/ unserviceable door of side board and S&F new door of Ist class hard wood (teak wood) as per shape and size shown in drawing including french polishing to match the other parts with piano type hinges complete all as specified and directed.
(e) Removing old broken/ unserviceable drawer of side board and S&F new drawer as per sample, shape and size shown in drawing including french polishing to match the other parts complete all as specified and directed
(f) Removing old broken/ unserviceable aluminium handle from the side board and S&F new alumunium handle as per sample, shape and size shown in drawing complete all as specified and directed
(g) Preparation of surface of side board by applying one set coat and making the surface plain by scraping with fine sand paper and polishing two coat of french polish on exposed surface to achive high class finish complete all as directed
Part-II Nowgong portion
Recanning of all type chairs :- (a) M&L for recanning of chairs and other furniture with white, half round plastic cane, 2 mm wide and 0.3 mm thick, weaving shall be done as per Godrej Pattern (Plastic cane shall be of Make: as approved by GE/Engineer-in-charge) complete all as specified in drawings & directed . Note - Chair dinning 0.39x0.39=0.1521, Chair writiing-0.43x0.47=0.2021,Chair easy seat-0.51x0.44=0.2244 & back-0.41x0.32=0.1321
(b) Minor repairing of various type of wooden chair including tightening of frame with bamboo pins and fevicol complete all as shown in drawing and as directed by GE/Engineer-in-charge.
(c) M&L for polishing of chair dinning with high class french polish till glossy finish is obtained complete all as specified in drawings & directed .
(d) M&L for polishing of chair dinning with high class french polish till glossy finish is obtained complete all as specified in drawings & directed .
(e) M&L for polishing of chair easy with high class french polish till glossy finish is obtained complete all as specified in drawings & directed .
Bed Hard ply top/Bed Newar
(a) Taking down the existing unserviceable ply wood from the existing head rest of Bed Hard/Bed Newar and S & F new plywood 3.5 mm thick teak faced including teak wood beeding 4 mm thick as per shape and size shown in drawing and fixed with nails including french polishing to ply & beeding complete all as specified in drawings & directed .
(b) Taking down the existing unserviceable ply wood from the existing foot rest of Bed Hard/Bed Newar and S & F new plywood 3.5 mm thick teak faced including teak wood beeding 4 mm thick as per shape and size shown in drawing and fixed with nails including french polishing to ply & beeding complete all as specified in drawings & directed .
(c) Taking down the existing broken unserviceable side long rail from Bed Hard/Bed Niwar and S & F new side long rail of teak wood (Ist class), well seasoned including french polishing with high class finish complete all as specified in drawings & directed .
(d) Taking down existing unserviceable ply top/newar from the Bed Hard/bed newar and S&F new ply top 12 mm thick, BWR grade complete all as specified in drawings & directed .
(e) Taking down the existing unserviceable broken legs of Bed Hard and S&F new legs of Ist class teak wood including 04 Nos PVC shoes at the bottom of each leg as per shape and size shown in drawing including french polishing complete all as specified in drawings & directed .
(f) S&F wooden bracket 8 Nos in each between each corners fixing with suitable screws complete all as specified in drawings & directed .
(g) Preparation of surfaces of Bed hard/Bed newar by applying one sealer coat and making the surface plain by scraping with fine sand paper and polishing two coats of french/sprit polish on exposed surface to achieve high class finish, complete all as specified in drawings & directed .
Sofa set 4/5 seater
(a) Removing of old cushion of size 21 x 22 inchs & 4 inchs thick from sofa set and replacing foam cushion of sofa set five seater with new PU foam cushion of 40 density (make: Sleepwell/Kurlon and cushion shall be covered with cotton tapesty cloth of range not less than Rs. 350.00 per meter, colour, shade and quality of tapesty shall be as approved by GE complete all as specified in drawings & directed .
(b) Preparation of surfaces of sofa set 5 seater by applying one set coat and making the surface plain by scraping with fine sand paper and polishing two coats of french polish on exposed surface to achieve high class finish, complete all as specified in drawings & directed .
PART-III FOR APS : Repair of Almirah Large steel with shelf :-
(a) Removing of old unserviceable handle of almirah large steel and S&F new handle 125 mm long of cast iron zinc chromium plated coated of Godrej pattern with nuts and bolts complete all as shown on drawing and as directed.
(b) Removing of old unserviceable locks of almirah large steel and S&F new steel locks of 6 levers special type with nuts and bolts including two steel keys complete all as shown on drawing and as directed.
(c) Painting of almirah large steel-Preparation of surfaces i.e filliing all holes and cracks or detoriated spots of old painted steel furniture with primer, (Internally /externally) putty than applying spray painting of synthetic enameled paint of Ist Gde, shade smoke grey/Olive green as approved by GE, complete all as shown on drawing and as directed.
(d) M & L for tighting of loose shelves with mild steel revitting/spot welding complete all as directed.
CHAIR COMPUTER W/O ARMS MODEL C-2 GODREJ
(a) Removing old/ unserviceable twin wheel castor from chair and S&F new twin wheel caster as per shape and size complete all as specified and directeds.
(b) Removing old /unserviceable seat and S & F new seat of PU foam 40 density upholstered with tapestry cloth (range not less then Rs 350/Mtr fixed on 12 mm thick commercial ply BWR grade complete all as shown on drawing and as directed.
(c) Removing old /unserviceable back and S & F newback of PU foam 40 density upholstered with tapestry cloth (range not less then Rs 350/Mtr fixed on 12 mm thickcommercial ply BWR grade complete all as shown on drawing and as directed.
(d) Removing old/unserviceable pedestal assy and S&F new pedestal assy as per shape and size and as directed.
(e) Removing old/unserviceable hydraulic systern and S&F new hydraulic systerm with gas presure300n force & 100 mm strock lenth all as per shape and size and as directed.
TABLE COMPUTER MAP
(a) Taking down existing unserviceable top from table computer and S&F new top shall be of 18 mm thick prelaminated partical board (Exterior grade) edge moulded all around fixed to frame all as shown on drawing and as directed
(b) Taking down existing unserviceable side frame from table computer and S&F new side frame shall be of 18 mm thick prelaminated partical board (Exterior grade) all as shown in drawing and as directed
(c ) Removing old unserviceeable key board from table computer and S&F new key board with telescopic channel as per shape and size complete all as specified and directed
(d) Taking down existing unserviceable /broken drawer from table computer and S&F new drawer fixed with telescopic channel to frame complete all as shown on drawing and as directed
DESK WITH SEAT MODEL NO 1 GODREJ 63.5X104.8X68.8X 27 CM
(a) Taking down existing unserviceable top from desk with seat and S&F new seat of the size 1100 x400 x18mm thick prelaminated partical board edge moulded all around fixed with the pvc beading to frame with screw with washer complete all as specified and directed.Minor welding work as bag hanging clip,S&F supply & fixing of back stiffiner, seat stiffiner ,leg stiffiner PVC cap and shoe as per sample available at BSO Yard and Painting the complete frame with shade light blue and smoke grey synthetic enamel paint of Ist quality including prepartion of old surface complete all as specified and directed.
(b) Taking down existing unserviceable back from desk with seat and S&F new seat of the size 1100 x200 x18mm thick prelaminated partical board edge moulded all around fixed with the pvc beading to frame with nut and screw with washer complete all as specified and directed.Minor welding work and Painting the complete frame with shade smoke grey synthetic enamel paint of Ist quality including prepartion of old surface complete all as specified and directed.
(c) Taking down existing unserviceable seat from desk with seat and S&F new seat of the size 1100 x800 x18mm thick prelaminated partical board edge moulded all around fixed with the pvc beading to frame with screw with washer complete all as specified and directed.Minor welding work and Painting the complete frame with shade smoke grey synthetic enamel paint of Ist quality including prepartion of old surface complete all as specified and directed. NOTE :- Above items workmanship should be completed as per Godrej pettern and finished quality should as per available sample at BSO Yard.
DESK WITH SEAT MODEL NO 2 GODREJ 70.5x 104.8x78.3x35 CM
(a) Taking down existing unserviceable top from desk with seat and S&F new seat of the size 1100 x400 x18mm thick prelaminated partical board edge moulded all around fixed with the pvc beading to frame with screw with washer complete all as specified and directed.Minor welding work as bag hanging clip,S&F supply & fixing of back stiffiner, seat stiffiner leg stiffiner PVC cap and shoe as per sample available at BSO Yard and Painting the complete frame with shade light blue and smoke grey synthetic enamel paint of Ist quality including prepartion of old surface complete all as specified and directed.
(b) Taking down existing unserviceable back from desk with seat and S&F new seat of the size 1100 x200 x18mm thick prelaminated partical board edge moulded all around fixed to frame with nut and bolt with washer complete all as specified and directed.Minor welding work and Painting the complete frame with shade smoke grey synthetic enamel paint of Ist quality including prepartion of old surface complete all as specified and directed.
(c) Taking down existing unserviceable seat from desk with seat and S&F new seat of the size 1100 x350 x18mm thick prelaminated partical board edge moulded all around fixed to frame with nut and bolt with washer complete all as specified and directed.Minor welding work and Painting the complete frame with shade smoke grey synthetic enamel paint of Ist quality including prepartion of old surface complete all as specified and directed.NOTE :- Above items workmanship should be completed as per Godrej pettern and finished quality should as per available sample at BSO yard.
DESK WITH SEAT MODEL NO 3 GODREJ 75x104.8x87.2x41 CM
(a) Taking down existing unserviceable top from desk with seat and S&F new seat of the size 1100 x400 x18mm thick prelaminated partical board edge moulded all around fixed with the pvc beading to frame with screw with washer complete all as specified and directed.Minor welding work as bag hanging clip,S&F supply & fixing of back stiffiner, seat stiffiner leg stiffiner PVC cap and shoe as per sample available at BSO Yard and Painting the complete frame with shade light blue and smoke grey synthetic enamel paint of Ist quality including prepartion of old surface complete all as specified and directed.
(b) Taking down existing unserviceable back from desk with seat and S&F new seat of the size 1100 x200 x18mm thick prelaminated partical board edge moulded all around fixed to frame with nut and bolt with washer complete all as specified and directed.Minor welding work and Painting the complete frame with shade smoke grey synthetic enamel paint of Ist quality including prepartion of old surface complete all as specified and directed.
(b) Taking down existing unserviceable seat from desk with seat and S&F new seat of the size 1100 x800 x18mm thick prelaminated partical board edge moulded all around fixed to frame with nut and bolt with washer complete all as specified and directed. Minor welding work and Painting the complete frame with shade smoke grey synthetic enamel paint of Ist quality including prepartion of old surface complete all as specified and directed. NOTE :- Above items workmanship should be completed as per Godrej pettern and finished quality should as per available sample at BSO yard.
EXECUTIVE SET MODEL NO PCH 7001D GODREJ
(a) Removing old/ unserviceable twin wheel castor from chair and S&F new twin wheel caster as per shape and size complete all as specified and directeds.
(b) Removing old /unserviceable seat and S & F new seat of PU foam 40 density upholstered with tepestry cloth (range not less then Rs 350/Mtr fixed on 12 mm thickcommercial ply BWR grade complete all as shown on drawing and as directed.
(c) Removing old /unserviceable back and S & F newback of PU foam 40 density upholstered with tepestry cloth (range not less then Rs 350/Mtr fixed on 12 mm thickcommercial ply BWR grade complete all as shown on drawing and as directed.
(d) Removing old/unserviceable pedestal assy and S&F new pedestal assy as per shape and size and as directed.
(e) Removing old/unserviceable hydraulic systern and S&F new hydraulic systerm with gas presure300n force & 100 mm strock lenth all as per shape and size and as directed.
(f) Removing old/unserviceable arms and S&F new arms of polyurathane all as per shape and size shown on drawing ans as directed.
M/S JAI BALAJI TRADERS
HINDUSTAN ENGINEERING WORKS
M/S Kumar Contractors
KHAZAN SINGH SAWHNEY
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .