Repairs to wooden joinery of OFA quarters at Ordnance Estate Ambarnath

Amount

Repairs to wooden joinery of OFA quarters at Ordnance Estate Ambarnath

Taking down Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each with shutters (without taking off shutters from the frame)

Taking down Chowkhats or frames not exc 1.5 sq. m each with shutters (without taking off shutters from the frame)

M&L rendering plastering 12mm thick on fair faces of brick work or concrete surfaces in CM 1:6,

S&F 1st class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered,put together with glue pinned at joints.

S&F 1st class hardwood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged) thickness of shutter 40mm

M&L 1st class hardwood, Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (with sash bars), edges of framing plain, divided into squares, mitred and rebated sash bars, any numbers, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats, thickness of shutter 30mm thick

S&F MS Butt hinges medium weight cold rolled mild steel, size of hinges 100 mm,

S&F Mild steel pressed handles, oval type, stove enamelled black, size of handle 150mm

S&F Mild steel barrel tower bolts, stove enamelled black, with bright bolt , length of bolt 150mm

M&L Cutting holes in brick walls built in cement mortar or cement lime mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required, exc. half brick but not exc. one brick

S&F MS clamps; hold fasts; and similar small articles conforming to Fe-290 Gde-E-165

M&L preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel ordinary tint, over a coat of pink primer

S&F MS sliding door bolts, plate type, stove enamelled black, with brightbolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed , length of bolt 300mm

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolt 250mm

S&F Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane, 4.0mm thick

Holes round drilled or cut in soft wood n. exc. 15mm

S&F Chimney bars (straight or camber); bearing bars; tongues or water bars for window frames; window guard bars, plain, let in and fixed independently in wooden frames, L or T section supports for shelves etc. and similar articles conforming to Fe-290 Gde E-165

M&L Preparation of new or previously untreated steel & iron surfaces of any description, over 10cm in width or girth, not otherwise described and applying Two coats of synthetic enamel ordinary tint , over a coat of primer red oxide zinc chrome

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

M&L preparing new surfaces plastered or unplastered, chalk whiting on plastered surfaces of walls preparatory to distempering and applying two coat oil emulsion distemper on walls

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing

Resecuring/Re-fixing or easing & adjusting without taking down, shutters of any description exc 1 sq. m and n exc 2 sq. m each

M&L 2nd class hardwood, fillets. bullnosed, splayed, chamfered or rounded on one edge or face, Exc 3 & n. exc 6 sq.cm

Dismantling of Wall and ceiling boards (AC,wooden plywood etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets

Dismantling unframed work in fillets, rails, posts, rafters,purlins, etc. under 40 sq. cm in section

M&L for 2nd class hard wood in scantling ,timber fixed with clean sawn wood.

S&F in repair ceiling flat or sloping, AC plain building boards, 6 mm thick, fixed to timber frame in ceiling,

M&L Preparing new surfaces plastered or unplastered and applying distempering with oil emulsion distemper on ceiling two coats

Removing excavated material exc. 1.50 km but n exc. 5 km and depositing where directed

Removing building materials AC sheet to a distance of 2.0 km or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination

Old dismantled door & window shutter with frame

M/s Vandan Enterprises (BID ID -744959)

S RAJ ENTERPRISES (BID ID -745087)

KUGANCONSTRUCTIONS (BID ID -741788)