Improvement works to the central stores of CEDC/North/Coimbatore

Amount

Earth work excavation in hard gravelly soil, stiff black cotton soil, hard red earth, shales, murram, gravel, stoney earth mixed with small sized boulders etc., complete as per standard specification.

Providing and laying, spreading and compacting graded stone aggregates using 0.396 cum of 45.00-22.40 mm, 0.528 cum of 22.40 - 2.36 mm and 0.396 cum of 2.36 mm & below size IRC metal to Wet Mix Macadam specification including premixing the materials with water at OMC in mechnanical mix plant carriage of mixed material by tipper to site laying in uniformlayers with pavers in Base course on well prepared surface and compacting with vibratory roller to acheive the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per specification clause 406 of MORTH

Plain cement concrete in CC 1:3:6, using 40mm HBG metal including cost of cement, all materials, labour charges including consolidation, curing, all leads, lifts, as per standard specification etc., complete.

Plain cement concrete in CC 1:2:4, using 20mm HBG metal including cost of cement, all materials, labour charges including consolidation, curing, all leads, lifts, as per standard specification etc., complete.

Brick work in CM 1:5 using class II chamber/ fly ash bricks including cost of all materials, labour charges, curing, lead, lift etc., complete.

Plastering with CM 1:5, 12 mm thick including the cost of all material, labour charges, lead, lift etc. complete.

Supplying and fixing of Doors (Single leaf) using MS angle 50x50x6mm for door frame and 40x40x6mm for shutter frame and shutter 18 Gauge MS Sheet with stiffners both front and back M.S. Flat of size 32x3mm with 6" hinges heavy duty, all Iron anodized fittings, including painting two coats of ready mixed enamel paint with one coat of primer approved quality and colour, cost of all materials, leads, lifts labour, etc., complete as per standard specification.

Repairing the existing steel rooling shutter by replacing the damaged accessories including two coats of enamel paint, cost of all materials, labour charges, lead, lift etc., complete.

Supplying and fixing of Windows (2 Leaves) of approved size using 35x35x5mm MS angle for outer frame 25x25x3mm angle for shutter frame with shutter 18 gauge M.S.Sheet and 12mm dia bars as horizontal 11 Nos.with necessary locking arrangements including Painting two coats ready mixed enamel paint with One coat of primer approved quality and colour, cost of all materials, leads, lifts labour etc., complete.

SGST to be quoted in Percentage (value alone) Ex. 9%, it should be entered as 9 only

CGST to be quoted in Percentage (value alone) Ex. 9%, it should be entered as 9 only

Inter-state GST @18% for other than Tamil Nadu supplier. If the contractor is within Tamil Nadu may be quoted as "0" only