REPAIRS/ REPLACEMENT OF WATER SUPPLY PUMPING LINES/ DISTRIBUTION LINE, CONTROL VALVES AND CONNECTED ITEMS INCLUDING FLAME PROOF WIRING, FITTINGS AND CONNECTED ITEMS AT AMN STORE BUILDINGS AT LONG RANGE AREA AND TRG AREA WELLINGTON UNDER GE WELLINGTON

Amount

Excavation in trenches not exceeding 1.5M wide and not exceeding 1.5M in depth and getting out in hard/ dense soil for laying of GI/ DI Pipe all as specified and directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25 Cms thickness all as specified and directed.

Removing excavated material to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point all as specified and directed.

Ball valve/ float valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed of size 15mm dia complete all as specified and directed.

Ball valve/ float valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed of size 20mm dia complete all as specified and directed.

Ball valve/ float valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed of size 25mm dia complete all as specified and directed.

Taking up/ down carefully serviceable / unserviceable CI/DI pipe(including all fittings) with spigot and socket ends and joints, connections from the trenches of size of 100mm dia all as specified and directed.

Taking up/ down carefully serviceable / unserviceable CI/DI pipe(including all fittings) with spigot and socket ends and joints, connections from the trenches of size of 150mm dia all as specified and directed.

Ductile iron pipe 100mm bore dia, spigot and socket ends, including specials class 'K-9" and including rubber gasket ( push on) joints of same make of DI pipe having two sections of different hardness for spigot and socket pipes as in trenches complete all as specified and directed.

Ductile iron pipe 150mm bore dia, spigot and socket ends, including specials class 'K-9" and including rubber gasket ( push on) joints of same make of DI pipe having two sections of different hardness for spigot and socket pipes as in trenches complete all as specified and directed.

Ductile iron specials such as bends, tapers, tee pieces (single and double branch) any type and angle/ radius and straight connecting piece but all ends socketed/flanged of size 80, 100 to 150 mm dia bore complete all as specified and directed. Make-Srikalahasthi pipe Ltd, Tata, Electro steel, Tisco, Jindal

Material and labour for Rubber gasket joint (tyton-Joint) for CI / DI spigot and socket pipe line of size 100mm dia bore including fixing and testing complete all as specified and directed. Make- Tata, Electro steel, Jindal

Material and labour for Rubber gasket joint (tyton-Joint) for CI / DI spigot and socket pipe line of size 150mm dia bore including fixing and testing complete all as specified and directed. Make- Tata, Electro steel, Jindal

Run lead joint for CI/DI spigot and socket pipe line of size 100mm dia bore all as specified and directed.

Run lead joint for CI/DI spigot and socket pipe line of size 150mm dia bore all as specified and directed.

Material and labour for 100 mm DI mechanical joint all as specified and directed.

Material and labour for 150 mm DI mechanical joint all as specified and directed.

Supply and fix threaded/ Welded MS flange 80mm dia joint for GI pipe with all necessary fittings all as specified and directed.

Supply and fix threaded/ Welded MS flange 50mm dia joint for GI pipe with all necessary fittings all as specified and directed.

Supply and fix threaded/ Welded MS flange 40mm dia joint for GI pipe with all necessary fittings all as specified and directed.

Taking up/ down carefully serviciable/ unserviceable 15mm dia GI Pipe and connections from the trenches or removal from walls, floors etc all as specified and directed.

Taking up/ down carefully serviciable/ unserviceable 20mm dia GI Pipe and connections from the trenches or removal from walls, floors etc all as specified and directed.

Taking up/ down carefully serviciable/ unserviceable 25mm dia GI Pipe and connections from the trenches or removal from walls, floors etc all as specified and directed.

Taking up/ down carefully serviciable/ unserviceable 40mm dia GI Pipe and connections from the trenches or removal from walls, floors etc all as specified and directed.

Taking up/ down carefully serviciable/ unserviceable 50mm dia GI Pipe and connections from the trenches or removal from walls, floors etc all as specified and directed.

Taking up/ down carefully serviciable/ unserviceable 80mm dia GI Pipe and connections from the trenches or removal from walls, floors etc all as specified and directed.

Steel water tubing medium grade galvanized with all fittings and laid in trenches / fixed on walls / floors of size 15mm bore all as specified and directed.

Steel water tubing medium grade galvanized with all fittings and laid in trenches / fixed on walls / floors of size 20mm bore all as specified and directed.

Steel water tubing medium grade galvanized with all fittings and laid in trenches / fixed on walls / floors of size 25mm bore all as specified and directed.

Steel water tubing medium grade galvanized with all fittings and laid in trenches / fixed on walls / floors of size 40mm bore all as specified and directed.

Steel water tubing medium grade galvanized with all fittings and laid in trenches / fixed on walls / floors of size 50mm bore all as specified and directed.

Steel water tubing medium grade galvanized with all fittings and laid in trenches / fixed on walls / floors of size 80mm bore all as specified and directed.

Cutting existing steel tubing 15mm dia for alterations and screwing existing steel tubing with requred acessories (Tee,Nipple and etc) all as specified and directed.

Cutting existing steel tubing 20mm dia for alterations and screwing existing steel tubing with requred acessories (Tee,Nipple and etc) all as specified and directed.

Cutting existing steel tubing 25mm dia for alterations and screwing existing steel tubing with requred acessories (Tee,Nipple and etc) all as specified and directed.

Cutting existing steel tubing 40mm dia for alterations and screwing existing steel tubing with requred acessories (Tee,Nipple and etc) all as specified and directed.

Cutting existing steel tubing 50mm dia for alterations and screwing existing steel tubing with requred acessories (Tee,Nipple and etc) all as specified and directed.

Taking out existing unserviceable gunmetal gate valve of size 50/40/25/20 mm dia after dismantling existing union, nipple and cutting the rusted out thread and making new thread for inserting new gate valve.

Gunmetal gate valve with iron wheel head screwed both ends for iron pipe of size 50mm dia all as specified and directed.

Gunmetal gate valve with iron wheel head screwed both ends for iron pipe of size 40mm dia all as specified and directed.

Gunmetal gate valve with iron wheel head screwed both ends for iron pipe of size 25mm dia all as specified and directed.

Gunmetal gate valve with iron wheel head screwed both ends for iron pipe of size 20mm dia all as specified and directed.

Gunmetal gate valve with iron wheel head screwed both ends for iron pipe of size 15mm dia all as specified and directed.

Water level monitoring instrument based on magnetic level sensing, sensor should sealed inside stainless steel and actuated by float and LED display Gives Level Indication (5 stages of 20% each) Automatic Control of Pump and Warning Alarms if level goes outside the automation range, including of necessary electrical wiring from float to LED display.

Taking down old unserviceable sluice valve and Supply and fix PN-1.60 sluice valve cast iron double flanged type non raising spindle with hand wheel and fixed by means of suitable bolts and nuts etc,after putting new rubber gasket etc for 80mm dia all as specified and directed.

Taking down old unserviceable sluice valve and Supply and fix PN-1.60 sluice valve cast iron double flanged type non raising spindle with hand wheel and fixed by means of suitable bolts and nuts etc,after putting new rubber gasket etc for 100mm dia all as specified and directed.

Taking down old unserviceable sluice valve and Supply and fix PN-1.60 sluice valve cast iron double flanged type non raising spindle with hand wheel and fixed by means of suitable bolts and nuts etc,after putting new rubber gasket etc for 150mm dia all as specified and directed.

Cutting PCC paving / road etc not exceeding 15cm thick for laying of Pipe all as specified and directed.

PCC 1:2:4 type B-1 using 20mm graded stone aggregate 100mm thick for making good road, finished fair and even all as specified and directed.

Taking down old unservicable stop valve and supply and fix gun metal stop valve of 15 mm size as specified and directed.

Construction of brick masonry valve chamber 230 mm thick wall of 600 mm x 600 mm x 860 mm ht internal size, for valves upto 50mm size necessary earth work and excavation in any type of soil, 150 mm thick PCC foundation in 1:4:8 type D2 using 40mm graded stone aggregate, brick work in walls with sub class B bricks built in CM 1:6, PCC Coping 75mm thick and bed blocks for embedding the angle iron hold fasts with PCC 1:2:4 type B using 20 mm stone aggregates, rendering in CM 1:4, 15 mm thick finished fair and even without using extra cement, including provision of MS Sheet cover 2mm thick fixed to MS angle iron frame made out of 40mm x 40 mm x 4 mm thick, two coats of synthetic enamel paint over a coat of red oxide primer to steel surfaces and locking arrangements with lock and key including taring to the embedded steel surfaces complete all as specifed and direted.

Construction of brick masonry valve chamber 230 mm thick wall of 900 mm x 900 mm x 860mm ht internal size, for valves of size 80/100 mm , necessary earth work and excavation in any type of soil, 150 mm thick PCC foundation in 1:4:8 type D2 using 40mm graded stone aggregate, brick work in walls with sub class B bricks built in CM 1:6, PCC Coping 75mm thick and bed blocks for embedding the angle iron hold fasts with PCC 1:2:4 type B using 20 mm stone aggregates, rendering in CM 1:4, 15 mm thick finished fair and even without using extra cement, including provision of MS Sheet cover 2mm thick fixed to MS angle iron frame made out of 40mm x 40 mm x 4 mm thick, two coats of synthetic enamel paint over a coat of red oxide primer to steel surfaces and locking arrangements with lock and key including taring to the embedded steel surfaces complete all as specifed and direted.

Construction of brick masonry valve chamber 230 mm thick wall of 1200 mm x 1200 mm x 860mm ht internal size, for valves of size more than 100mm , necessary earth work and excavation in any type of soil, 150 mm thick PCC foundation in 1:4:8 type D2 using 40mm graded stone aggregate, brick work in walls with sub class B bricks built in CM 1:6, PCC Coping 75mm thick and bed blocks for embedding the angle iron hold fasts with PCC 1:2:4 type B -1 using 20 mm stone aggregates, rendering in CM 1:4, 15 mm thick finished fair and even without using extra cement, including provision of MS Sheet cover 2mm thick fixed to MS angle iron frame made out of 40mm x 40 mm x 4 mm thick, two coats of synthetic enamel paint over a coat of red oxide primer to steel surfaces and locking arrangements with lock and key including taring to the embedded steel surfaces complete all as specifed and direted.

Foot valves of size 80 mm of cast iron flange ends swing type with rubber seats of single disc type complete all as specified and directed.

Foot valves of size 100 mm of cast iron flange ends swing type with rubber seats of single disc type complete all as specified and directed.

Disconnecting the electric motor of capacity 10HP from position, strip opening the motor, taking out burnt copper winding wire from slots, cleaning the slots, rewinding the motor with suitable gauge of copper winding wire, insulating and vernishing, baking, including supply and replacing the bearings and refixing the motor with proper alignment with pump set, connecting up the electric connections testing, commissioning and transporting complete all as specified and directed.

All as per item No 56 hereinbefore but 15HP motor all as specified and directed.

All as per item No 56 hereinbefore but 25HP motor all as specified and directed.

All as per item No 56 hereinbefore but 40HP motor all as specified and directed.

All as per item No 56 hereinbefore but 30HP motor all as specified and directed.

All as per item No 56 hereinbefore but 2HP motor all as specified and directed.

All as per item No 56 hereinbefore but 1HP motor all as specified and directed.

All as per item No 56 hereinbefore but 7.5HP centrifugal pump all as specified and directed.

All as per item No 56 hereinbefore but 10HP centrifugal pump all as specified and directed.

Dismantling the defective centrifugal pump set, multi stage of capacity 40HP from foundation by opening of coupling and foundation bolts and transporting to workshop for repairing and reassembling after servicing and overhauling complete with oiling / greasing, lubricating the parts including repair/ replacement of worn out parts and spray painting with one coat of existing colour paint and writing SM / MES No with white paint and installation, commisioning and testing on full load complete all as specified and directed. Note: (i) The rate quoted for this item shall include for above items only. Spares are to measured and paid separately under subsequent items. (ii) Cost of other minor items/ spares such as nut, bolt washers, gaskets, paint etc which are not covered but required for effective functioning of the plant shall be deemed to be included in this item. (iii) The spares shall be of original make of pump as suitable as approved

Supply only CI impeller (one No) for centrifugal pump set, multi stage of capacity 40HP all as specified and directed.

Supply only bearing (2 Nos) for front and rear side of centrifugal pump set, multi stage of capacity 40HP all as specified and directed.

Supply only Gun metal bush (2 Nos) for front and rear side of centrifugal pump set, multi stage of capacity 40HP all as specified and directed.

Supply only Key suitable for impeller of centrifugal pump set, multi stage of capacity 40HP all as specified and directed.

Supply only Key suitable for coupling of centrifugal pump set, multi stage of capacity 40HP all as specified and directed.

Supply only Coupling set suitable for coupling of centrifugal pump set, multi stage of capacity 40HP all as specified and directed.

Supply only rubber bush with bolts, nuts, washers and spring washers suitable for centrifugal pump set, multi stage of capacity 40HP all as specified and directed.

Dismantling the defective centrifugal pump set, multi stage of capacity 25HP from foundation by opening of coupling and foundation bolts and transporting to workshop for repairing and reassembling after servicing and overhauling complete with oiling / greasing, lubricating the parts including repair/ replacement of worn out parts and spray painting with one coat of existing colour paint and writing SM / MES No with white paint and installation, commisioning and testing on full load complete all as specified and directed. Note: (i) The rate quoted for this item shall include for above items only. Spares are to measured and paid separately under subsequent items. (ii) Cost of other minor items/ spares such as nut, bolt washers, gaskets, paints etc which are not covered but required for effective functioning of the plant shall be deemed to be included in this item. (iii) The spares shall be of original make of pump as suitable as approved

Supply only CI impeller (one No) for centrifugal pump set, multi stage of capacity 25HP all as specified and directed.

Supply only bearing (2 Nos) for front and rear side of centrifugal pump set, multi stage of capacity 25HP all as specified and directed.

Supply only Gun metal bush (2 Nos) for front and rear side of centrifugal pump set, multi stage of capacity 25HP all as specified and directed.

Supply only Key suitable for impeller of centrifugal pump set, multi stage of capacity 25HP all as specified and directed.

Dismantling the defective centrifugal pump set, multi stage of capacity 15HP from foundation by opening of coupling and foundation bolts and transporting to workshop for repairing and reassembling after servicing and overhauling complete with oiling / greasing, lubricating the parts including repair/ replacement of worn out parts and spray painting with one coat of existing colour paint and writing SM / MES No with white paint and installation commisioning and testing on full load complete all as specified and directed. Note: (i) The rate quoted for this item shall include for above items only. Spares are to measured and paid separately under subsequent items. (ii) Cost of other minor items/ spares such as nut, bolt washers, gaskets, paints etc which are not covered but required for effective functioning of the plant shall be deemed to be included in this item. (iii) The spares shall be of original make of pump as suitable as approved

Supply only CI impeller (one No) for centrifugal pump set, multi stage of capacity 15HP all as specified and directed.

Supply only bearing (2 Nos) for front and rear side of centrifugal pump set, multi stage of capacity 15HP all as specified and directed.

Supply only Gun metal bush (2 Nos) for front and rear side of centrifugal pump set, multi stage of capacity 15HP all as specified and directed.

Supply only Key suitable for impeller of centrifugal pump set, multi stage of capacity 15HP all as specified and directed

Dismantling the defective centrifugal pump set, multi stage of capacity 40HP from foundation by opening of coupling and foundation bolts and transporting to workshop for repairing and reassembling after servicing and overhauling complete with oiling / greasing, lubricating the parts including repair/ replacement of worn out parts and spray painting with one coat of existing colour paint and writing SM / MES No with white paint and installation, commisioning and testing on full load complete all as specified and directed. Note: (i) The rate quoted for this item shall include for above items only. Spares are to measured and paid separately under subsequent items. (ii) Cost of other minor items/ spares such as nut, bolt washers, gaskets, paint etc which are not covered but required for effective functioning of the plant shall be deemed to be included in this item. (iii) The spares shall be of original make of pump as suitable as approved

Supply only CI impeller (one No) for centrifugal pump set, multi stage of capacity 10HP all as specified and directed.

Supply only bearing (2 Nos) for front and rear side of centrifugal pump set, multi stage of capacity 10HP all as specified and directed.

Supply only Key suitable for impeller of centrifugal pump set, multi stage of capacity 10HP all as specified and directed

Fully Automatic Star Delta Starter 7.5 to 15 HP type ML 1.5 current rating 10 to 25 Amps in Sheet-Steel Enclosure with Single Phase Protection feature (Motor Rating AC-3 Duty, 415 V, 50HZ, 3 Ph) all as specified and directed. Make L&T Cat No. SS94362 or equivalent in ABB/ Siemens.

Fully Automatic Star Delta Starter 25 HP type ML-2 current rating 25 to 40 Amps in Sheet-Steel Enclosure with Single Phase Protection feature (Motor Rating AC-3 Duty, 415 V, 50HZ, 3 Ph) all as specified and directed. Make L&T Cat No. SS94366 or equivalent in ABB/ Siemens.

Fully Automatic Star Delta Starter 40 HP type ML-3 current rating 35 to 65 Amps in Sheet-Steel Enclosure with Single Phase Protection feature (Motor Rating AC-3 Duty, 415 V, 50HZ, 3 Ph) all as specified and directed. Make L&T Cat No. SS94021 or equivalent in ABB/ Siemens

Fully Automatic Star Delta Starter 12.5 HP type ML-1.5 relay range 9-14 Amps in Sheet-Steel Enclosure with Single Phase Protection feature (Motor Rating AC-3 Duty, 415 V, 50HZ, 3 Ph) all as specified and directed.

Three core flat PVC insulated Copper Cable, nominal area of conductor 4 Sqmm, 1100volts, conforming to IS:694 all as specified and directed.

Three core flat PVC insulated Copper Cable, nominal area of conductor 6 Sqmm, 1100 volts, conforming to IS:694 all as specified and directed.

Three core flat PVC insulated Copper Cable, nominal area of conductor 10 Sqmm, 1100 volts, conforming to IS:694 all as specified and directed.

Supply only calcium hypochlorite granule for water treatment all as specified and directed. Make: Aquafit

Supply only Alum (Poly aluminum chloride) for water treatment all as specified and directed. Make: Vikram Pac

Attending emergency break down complaints pertains to break down of under ground DI/CI/GI pipe of dia 80/100/150 mm . Corresponding materials will be measured and paid separately. Sufficient no of plumbers and helpers to be engaged to complete the work within directed time period without any interuuption to daily supply routine all as specified and directed.

Taking down aluminium/ copper point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting, bell etc, and making good disturbed surfaces with smooth finish matching with the existing surface of walls, floors, etc. all as specified and directed.

Point wiring complete with 1.5 sqmm (nominal area) FRLS grade PVC insulated, unsheathed stranded copper conductor single core cable 1100 volts grade in stove enamelled steel conduit concealed in wall complete with fittings / accessories including 1.5 Sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor and connected to common earth dolly for ONe light/ Ex-fan point controlled by one switch 5 Amps SP all as specified and directed. Note: 1. Sunken box/ Cover plate for modular plate for modulat switches, sockets etc will be measured and paid separately under relevant items and blank plate required if any will be deemed included in the item rate.

Point wiring complete with 1.5 sqmm (nominal area) FRLS grade PVC insulated, unsheathed stranded copper conductor single core cable 1100 volts grade in PVC conduit concealed in wall complete with fittings / accessories including 1.5 Sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor and connected to common earth dolly for ONe light/ Ex-fan point controlled by one switch 5 Amps SP all as specified and directed. Note: 1. Sunken box/ Cover plate for modular plate for modulat switches, sockets etc will be measured and paid separately under relevant items and blank plate required if any will be deemed included in the item rate.

All as per Item No 99 hereinbefore but One 3 pin 5A switch socket outlet on independent Board all as specified and directed.

All as per Item No 99 hereinbefore but One 3 pin 5A Socket outlet on same board complete all as specified and directed

All as per Item No 99 hereinbefore but point wiring complete with 2.5 sqmm for 3 pin 15 A socket outlet on independent board including 2.5 sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor all as specified and directed.

Point wiring complete with 1.5 sqmm (nominal area) FRLS grade PVC insulated, unsheathed stranded copper conductor single core cable 1100 volts grade in PVC casing and caping complete with fittings / accessories including 1.5 Sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor and connected to common earth dolly for ONe light/ Ex-fan point controlled by one switch 5 Amps SP all as specified and directed. Note: 1. Sunken box/ Cover plate for modular plate for modulat switches, sockets etc will be measured and paid separately under relevant items and blank plate required if any will be deemed included in the item rate.

All as per Item No.103 hereinbefore but One 3 pin 5A switch socket outlet on independent Board all as specified and directed.

All as per Item No 103 hereinbefore but One 3 pin 5A Socket outlet on same board complete all as specified and directed

All as per Item No 103 hereinbefore but point wiring complete with 2.5 sqmm for 3 pin 15 A socket outlet on independent board including 2.5 sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor all as specified and directed.

LED light fitting 2x8 watt flame proof, CIMFR certified recommended for gas / vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminium hosing with heat resistant toughened glass with LED tube light fixtures driver, holders connector etc. complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size all as specified and directed. Make: Crompton Cat Part No: EXTN2LT8-8 or equivalent in Bajaj/ Wipro/ Havells

Switch flame proof rotary type with termination box in LM6, 16A, single pole 250V all as specified and directed.

Flame proof switch socket and plug combined in LM6 cable termination box in LM6 16A, 250V, 2P+earth all as specified and directed.

Ceiling rose, 3 terminals PVC / polycarbonate, isolated body all as specified and directed.

Switch piano flush type 5 Amps SP, one way all as specified and directed.

Modular switch one way 6A 230V AC 50 HZ SP one module all as specified and directed.

Modular socket 2/3 pin combined 6A 230V AC 50 HZ SP two module all as specified and directed.

Modular switch socket combination 16A, 6 Pin, 3 module all as specified and directed.

Taking down old unsv FTL fittings, Supply and fix 22W LED 125 Lum/Watts 4ft batten comprises of thermally conductive material pre-wired with high efficiency electronic driver, high translucent serrated milky white diffuser gets glare free, smooth light distribution lamp colour white all as specified and directed. Make. HavellsCat Part No. LHEXAWPN7IN1W025 or equivalent make in CG/ Philips / Bajaj.

Taking down old unsv 2ft FTL fitting Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC 125 Lum/Watt decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Make - Havells Cat Part No-LHEXACP5IN1W010 / Philips/CG/Orpit

Round shape 18 watt 220 volts AC 6500K lumen output 2400, 30 cm dia surface panel type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed Make-Luker product code- LNPSRR18 or equivalent techno commercial in Philips/ CG/ Bajaj

Taking down old unsv Bulk Head fittings, Supply and fix 10W LED Bulk head luminaries including LED light driver holderconnecting up with threee core flexible copper conductor cable of suitable size all as specified and directed. Make: Halonix cat part No HLBH-02-10CW or or equivalent in Philips/ CG/ Bajaj

Taking down unserviceable building security light and Material and labour for LED Security Light fitting of 15 Watt comprising of eposy powder coated housing enclosed with glass cover in frame with protection IP 65 complete with all accessories and lamp colour white,110 Lumen/Watt all as specified and directed. Make .Halonix cat part No HLSLD-09H-15CWL-R or or equivalent in Philips/ CG/ Bajaj

GI Pipe light Grade 40 mm bore bracket of suitable size bent to shape of not less than 1.2m long with clamp made of GI flat Iron of size 32 x 6mm for street light fittings, duly painted with one coat of red oxide primer and two coats of aluminium based paint, fixed on poles with bolts, nuts and washers complete all as specified and directed.

Taking down copper/aluminium Submain wiring and Material and Labour for Submain wiring with copper conductor along with PVC Conduit with 2 runs of FRLS grade PVC copper conductor cable 4 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 4 Sqmm drawn through and including Steel Conduit 20 mm dia with all fittings all as specified and directed. Note: 3 runs of cable and one run of conduit pipe together measured as one RM

All as per Item No 121. hereinbefore but in PVC Conduit, all as specified and directed.

Taking down copper/aluminium Submain wiring and Material and Labour for Submain wiring with copper conductor along with PVC Conduit with 2 runs of FRLS grade PVC copper conductor cable 6 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 6 Sqmm drawn through and including Steel Conduit 20 mm dia with all fittings all as specified and directed. Note: 3 runs of cable and one run of conduit pipe together measured as one RM

All as per Item No 123. hereinbefore but in PVC Conduit, all as specified and directed.

MODULAR METAL FLUSH BOX 1/2 module all as specified and directed.

MODULAR METAL FLUSH BOX 3 module all as specified and directed.

MODULAR METAL FLUSH BOX 4 module all as specified and directed.

MODULAR METAL FLUSH BOX 6 module all as specified and directed.

Modular White Cover Plate with Frame White cover plate with frame, 1 module all as specified and directed.

Modular White Cover Plate with Frame White cover plate with frame, 2 module all as specified and directed.

Modular White Cover Plate with Frame White cover plate with frame, 3 module all as specified and directed.

Modular White Cover Plate with Frame White cover plate with frame, 4 module all as specified and directed.

Modular White Cover Plate with Frame White cover plate with frame, 6 module all as specified and directed.

Modular White Cover Plate with Frame White cover plate with frame, 8 module all as specified and directed.

Taking down unserviceable DBs with MCBs and Supply and fix MCB DB SPN 4 way 230 volts, double door type with minimum capacity of 200 Amps rated bus bar including necessary dummy plate and necessary civil works all as specified and directed. Make: ABB/ Legrand/ L&T.

Taking down unserviceable DBs with MCBs and Supply and fix MCB DB SPN 8 way 230 volts, double door type with minimum capacity of 200 Amps rated bus bar including necessary dummy plate and necessary civil works all as specified and directed. Make: ABB/ Legrand/ L&T.

Taking down unserviceable DBs with MCBs and Supply and fix MCB DB TPN 4 way 415 volts, double door type with minimum capacity of 200 Amps rated bus bar including necessary dummy plate and necessary civil works all as specified and directed. Make: ABB/ Legrand/ L&T.

Taking down unserviceable DBs with MCBs and Supply and fix MCB DB TPN 8 way 415 volts, double door type with minimum capacity of 200 Amps rated bus bar including necessary dummy plate and necessary civil works all as specified and directed. Make: ABB/ Legrand/ L&T.

Supply and fix 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 63 AMPs, in the MCB DB Complete with connection testing and commissioning all as specified and directed. Make: ABB/ Legrand/ L&T.

All as per item No. 139. herein before but SP 6 to 32 Amps capacity all as specified and directed.

Exhaust fan made of sturdy Engineering plastic complete with louvers shutter,voltage 230 V, 50 Hz,RPM 1200, COPPER Winding of sweep 250 mm complete all as specified and directed. Make:Crompton greaves/Havells/Bajaj

Material and labour for light grade GI pipe 40mm dia for cable protection all as specified and directed.

Supply and replacement of 50 Sqmm 3.5 Core of 1100 volts grade LT UG Cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) with stranded aluminium conductor, laid in trenches/ducts, fixed on wall/inside panel, drawn through pipe including takingout the old unsv LT cable complete all as specified and directed. Note: Rate deemed to be inclusive of conecting up with control gear including cable glands and cable lugs complete

All as per Item No 143 hereinbefore but 70 Sqmm 3.5 core all as specified and directed

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m depth and getting out in soft/ loose soil for laying for under ground cable and foundation of poles etc complete all as specified and directed

Supply and spreading clean dry riddled excavated sand free from stone in trenches for cushioning all as specified for cable protection in trenches / ducts complete all as directed. Note: The punned down thickness shall only be measured

Supplying and laying reinforced precast concrete cable cover,Class LV, Type I, flat, size 250mm x 150mm x 40mm all as specified and directed.

Cutting PCC/ road 200mm thick for laying of cable all as specified and directed.

Chemical earthing complete with Copper earth plate electrode 90cmx60cm x 5 mm thick buried directly in ground vertically to depth not less than 3.00 mtr below ground level with top edge of earth plate at a depth not less than 1.5 mtr below normal ground level connected to and including Copper strip of 32x6mm as earth lead up to 7.5 mtr long fixed by means of bolts, nuts, check nuts and washers etc. of galvanised iron or steel including provn of GI protection pipe light grade of 40mm bore and connected to earth strip earthing test point all as shown in electrical plate No.5 of SSR Part-I 2009 and as specified or indicated and testing on completion including necessary excavation & earthwork in any type of soil, PCC (1:3:6) type C1 chamber, precast slab 50mm thick in cement concrete (1:2:4)type B1 (reinforced with welded steel wire fabric (XPM) of weight not less than 4kg/sqm) with frame, funnel with watering pipe of 15mm bore medium grade, wire mesh and lugs, test point including salt, Coal & Magnesium sulphate etc. complete. Note:- copper strip exceeding 7.5m long shall be measured & paid separately.The earth resistance value less than 1 ohm.Failing to achieve the value the contractor shall be re do the earthing without any extra cost.

Earthing complete with galvanisedsteel earth plate electrode 60cm×60cm× 6mm thick, burieddirectly in ground (earth pit not lessthan 2.25 metres deep below groundlevel) with top edge of the plate notless'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mmdia by means of bolts, nuts, checknuts and washers of galvanised ironor steel all as shown in electricalplate No. 3 connected to earthing testpoint all as specified or indicated including testing on completion all as specified and directed.

KUMAR AGENCIES (BID ID -3132201)

POOJA ENGINEERING (BID ID -3114145)