PKG 10 FIXATION OF RATES FOR ADDITIONAL ITEMS OF NEW PWSS UNDER HAILAKANDI CIRCLE TO BE EXECUTED UNDER JJM ASSAM

Amount

Providing, installation and commissioning GRP Panel tanks conforming to IS 14399 (part 1 and part 2): 1996 on the staging provided at different heights upto 20 m i) For capacity of 20 KL

ii) For capacity of 24 KL

iii) For capacity of 30 KL

iv) For capacity of 32 KL

v) For capacity of 40 KL

vi) For capacity of 50 KL

vii) For capacity of 60 KL

viii) For capacity of 70 KL

ix) For capacity of 72 KL

x) For capacity of 80 KL

xi) For capacity of 84 KL

xii) For capacity of 90 KL

xiii) For capacity of 98 KL

xiv) For capacity of 220 KL

Supplying, installation, fitting & fixing, testing and commissioning of Electric driven 3-phase (for 5 HP/ 7.5 HP) open Well Submersible pump set of approved make with IS mark with bronze/Stainless steel impeller of suitable diameter with suction casing, Casing wear ring (bronze), non-return valve, delivery casing, piping up to sluice valve all complete. The pump set should be coupled with IS marked electric motor drive of adequate power suitable for operation at 415 V, 50 Hz input power with DOL Starter /Star delta Starter including Electric Control panel board enclosure made of MS Sheet duly painted with Anti-corrosive paints complete, fitted with all electrical accessories i.e. Off-On Switch, Voltmeter, Ammeter, Indicator light etc., Complete wiring from Panel Board to Main Line including supply of Aluminium Armoured Cable of adequate cross section, Earthing wire and all necessary materials for the same, complete and other accessories and labour charge for installation of the pump etc. all complete as specified and directed by the Department with One year warranty from the date of commissioning and satisfactory testing against any manufacturing defect. [If any such defect is found during the year from the date of installation and satisfactory testing, supplier will have to rectify the defect at their cost and risk & if necessary replace the pump set.] Test Certificate of Pump, Motor, Starter, Panel Board, etc. from the manufacturer shall have to be submitted: Clear Water Pump Design Head = 30 M i) For capacity 5 HP

ii) For capacity 7.5 HP

Carriage of Materials by Manual Labour including loading, unloading and stacking for lead less than 0.50 KM. (A) Cost of carriage including loading, unloading & stacking for first 50 metres and (B) Every additional lead of 50 metre or part thereof beyond 1st 50 metre upto 9 such additional lead. i) Lime, moorum, building rubbish (A)

ii) Lime, moorum, building rubbish (B)

iii) Earth (A)

iv) Earth (B)

v) Manure or sludge (A)

vi) Manure or sludge (B)

vii) Excavated Rock (A)

viii) Excavated Rock (B)

ix) Sand, stone aggregate below 40mm nominal size (A)

x) Sand, stone aggregate below 40mm nominal size (B)

xi) Stone aggregate 40mm nominal size and above (A)

xii) Stone aggregate 40mm nominal size and above (B)

xiii) Soiling stone (A)

xiv) Soiling stone (B)

xv) Bricks (A)

xvi) Bricks (B)

xvii) Brick Tiles (A)

xviii) Brick Tiles (B)

xix) Stone blocks, G.I. pipes, D.I pipes and other heavy material such as Sluice valve, CI specials, DI specials (A)

xx) Stone blocks, G.I. pipes, D.I pipes and other heavy material such as Sluice valve, CI specials, DI specials (B)

xxi) Cement (A)

xxii) Cement (B)

xxiii) Steel (A)

xxiv) Steel (B)

xxv) Timber (A)

xxvi) Timber (B)

xxvii) Roofing sheets (A)

xxix) Roofing sheets (B)

xxx) Chain link fencing G.I wire (A)

xxxi) Chain link fencing G.I wire (B)

xxxii) HDPE pipes a) 63 mm dia. (A)

b) 63 mm dia. (B)

c) 75 mm dia. (A)

d) 75 mm dia. (B)

e) 90 mm dia. (A)

f) 90 mm dia. (B)

g) 110 mm dia. (A)

h) 110 mm dia. (B)

i) 125 mm dia. (A)

j) 125 mm dia. (B)

k) 140 mm dia. (A)

l) 140 mm dia. (B)

m) 160 mm dia. (A)

n) 160 mm dia. (B)

xxxiii) UPVC casing pipes a) 100 mm dia. (A)

b) 100 mm dia. (B)

c) 150 mm dia. (A)

d) 150 mm dia. (B)

e) 200 mm dia. (A)

f) 200 mm dia. (B)

Providing, installation and commissioning of 100 mm dia. deep tubewell by hand boring within the jurisdiction of different divisions of PHED, Assam including preparation of site, drilling the DTW including extraction of drill pipes etc., lowering, fitting, fixing 100 mm diameter UPVC pipe assembly comprising of strainer, pipes and cone in potable water bearing strata, washing the bore well etc., supplying necessary jointing materials and supplying and packing pea gravel of size 3 mm to 10 mm around the periphery of casing including screening washing etc. all complete as directed beyond 80 m depth and maximum upto 120 m depth.

Construction of composite structures for Mini Schemes with different capacities of elevated Polyethylene water Storage Tanks for a minimum SBC of 80 KN/sqm (SBC is to be determined as per a separate item) with RCC staging of 12 m height including earthwork in excavation for foundation including refilling (return filling) the quantity as necessary after completion of work, RCC works, plastering, painting, reservoir cum sump at ground level, filter unit and pump house above reservoir with underdrainage works in filter beds, placing the filter media in one bedded filter, pipes, wash water pipes, vent pipes and sluice valves as required including centering, shuttering, scaffolding all materials and labour as per approved drawings and specifications, all complete as directed by the department. i) For Capacity 10000 Litres

ii) For capacity of 15000 Litres

iii) For capacity of 20000 Litres

iv) For capacity of 30000 Litres

BRAHMAPUTRA COMMERCE AND TRADE

M S P and B ENTERPRISE

Power Tools and Engineering

YOGYA PROJECTS

KRISHNA ENGINEERINGS

Hitech Industries

GLOBAL POWER AND ENGINEERS

NECCON POWER & INFRA LTD

Bidder Name

SSK INDUSTRIES