PROVN OF GERMAN TECHNOLOGY BASED ON GREASE TRAPS IN MESSES AND PROVN OF KOTASTONE AT VARIOUS LOCATIONS IN TECH AREA AT AFS ADAMPUR

Amount

Supplying, fixing, commissioning and testing of Grease separator made of polyethylene as per DIN EN 1825; proven Stability of 50 years; for below ground installation; overall dia of 1320 mm.; with ventilation provision; emptying via suction line DN 65 PN 10; counter flange with fire hose quick coupling 75B and 2½" blank cap and satisfy reaction to fire Class A . Standard odour tight top cover of 600 mm dia. clear opening; frame made of concrete material and cover made of cast iron; with raising tube, load class A15 according to EN 124 Inlet and outlet dia: DN 150 Make: ACO or Equivalent : Model: Lipumax PD or Equivalent Nominal Size: NS 10 Grease Storage: 415L, Sludge Storage: 1010L, Overall Capacity: 2170L Art No: 3210.81.00 + 3300.14.01

Supplying, fixing, commissioning and testing of Grease separator made of polyethylene as per DIN EN 1825; proven Stability of 50 years; for below ground installation; overall dia of 1320 mm.; with ventilation provision; emptying via suction line DN 65 PN 10; counter flange with fire hose quick coupling 75B and 2½" blank cap and satisfy reaction to fire Class A . Standard odour tight top cover of 600 mm dia. clear opening; frame made of concrete material and cover made of cast iron; with raising tube, load class A15 according to EN 124 Inlet and outlet dia: DN 150 Make: ACO or Equivalent : Model: Lipumax PD or Equivalent Nominal Size: NS 7 Grease Storage: 285L, Sludge Storage: 730L, Overall Capacity: 1675L Art No: 3207.81.00 + 3300.14.01

Supplying, fixing, commissioning and testing of Grease separator made of polyethylene as per DIN EN 1825; proven Stability of 50 years; for below ground installation; with ventilation provision; emptying via suction line DN 65 PN 10; counter flange with fire hose quick coupling 75B and 2½" blank cap and satisfy reaction to fire Class A . Standard odour tight top cover of 600 mm dia. clear opening; frame made of concrete material and cover made of cast iron; with raising tube, load class A15 according to EN 124 Inlet and outlet dia: DN 150 Make: ACO or Equivalent : Model: Lipumax PD or Equivalent Nominal Size: NS 4 Grease Storage: 270L, Sludge Storage: 460L, Overall Capacity: 930L

Excavation in trenches in SOFT/LOOSE soil not exceeding 1.50 metre wide and not exceeding 1.50 metre in depth; for foundation, etc. and getting out complete all as specified and directed.

Excavation in trenches in SOFT/LOOSE soil exceeding 1.50 metre wide and but not exceeding 3.00 metre in depth; for foundation, etc. and getting out complete all as specified and directed.

Returning filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick each, complete, all as specified and directed.

Removing excavated spoil to a distance exceeding 250 metre but n exc. 500m and depositing where directed at a level not exceeding 1.5 metre above the starting point complete, all as specified and directed.

M&L for sand filling under floors or in foundations including watering and consolidation complete, all as specified and directed.

M&L for PCC type C-2 (1:3:6), using 40 mm graded crushed stone aggregates as in filling & mass concrete, complete all as specified and directed.

M&L for Reinforced cement concrete, type B-1, (1:2:4), using 20 mm graded crushed stone aggregates as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, and in shelves and the like complete all as specified and directed.

M&L for Pre-cast RCC type B-1 (1:2:4), using 20 mm graded crushed stone aggregates landings, cover slabs (for manholes etc.), shelves and similar articles with plain faces including all mouldings but excluding frame, set in cement mortar (1:4) complete all as specified and directed.

M&L for Use & waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (Horizontal or sloping) with fair finished surfaces of concrete, complete all as specified and directed.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces, finished even and fair on walls in cement mortar (1:4), complete all as specified and directed.

M&L for three coats of whitewash over newly plastered surfaces of wall including preparation of surfaces, complete all as specified and directed

M&L for Concrete bed to drain including packing under, and haunching against the sides of pipes after they are laid and tested; in cement concrete 1:3:6 type C-2, complete all as specified of following size:-

100 mm bore

150 mm bore

M&L for Reinforced concrete pipe class NP-2, ISI marked, laid in trenches including jointing & testing complete with collars complete all as specified of following size:-

100 mm bore

150 mm bore

M&L for Cutting into existing manholes for connecting new drains, of 100 mm bore pipe, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1, smooth finished, reforming benching as required, complete all as specified and directed.

M&L for Cutting into existing manholes for connecting new drains, of 150 mm bore pipe, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1, smooth finished, reforming benching as required, complete all as specified and directed.

S&F, uPVC pipes 75 mm external dia, type-B, ISI marked (IS:13592) single socketed in any length with or without rubber ring joints, fixed under floors/walls as SWR pipes, IN REPAIRS, complete all as specified and directed.

S&F, uPVC/PVC bend any radius, suitable for uPVC soil waste discharge pipes 75 mm external dia, IN REPAIRS, complete all as specified and directed.

S&F, uPVC/PVC vent cowl 75-110 mm external dia, complete all as specified and directed.

PROVN OF KOTASTONE AT VARIOUS LOCATIONS IN TECH AREA

M&L for Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc., and brushing a coat of cement slurry with 3 kg of cement per Sq.m, complete all as specified and directed.

Taking down cement plaster of any description on brick walls or concrete surfaces etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for Machine cut Kota stone slab flooring 18-22 mm thick, in flooring and for staircase step in single piece, laid over over & including 20 mm thick (average thickness) cement mortar (1:3) screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing (Granite finish) complete all as specified and directed.

M&L for Machine cut Kota stone slab 18-22mm thick on vertical surfaces as in staircase riser skirting/ dado etc in single piece over and including 10 mm thick rendering in cement mortar (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and directed

Notes: Amount of credit for retrieved materials is mentioned in tender documents in pdf form which will be deducted while acceptance of tender offline. (ii) Servicing of Grease trap to be done after every 2 months for one year by suction machine. The rates quoted of Grease traps by the contractor inclusive of servicing cost.

BHARAT ENTERPRISES (BID ID -3481338)

L-7 Primewave Communications (BID ID -3481465)

siddharthenterprises (BID ID -3480764)

KAMAL AGGARWAL (BID ID -3481321)

DASHMESH BUILDERS (BID ID -3481450)

BABBAR ENGINEERS (BID ID -3481533)