UPKEEPING OF ELECTRIC SUPPLY INSTALLATION INCLUDING SUBSTATION YARD AT NOFRA AND VARUNAPURI AREA UNDER AGE EM II OF GE NW VASCO

Amount

M & L for preparation of old painted surfaces by removing dust, rust, oil and scraping etc for Painting the LT Panel boards , VCBs, APFC panel and Feeder piller etc in different locations with two coats of synthetic enamel paint of blue colour over the existing painted surfaces after preparing the old painted surfaces and apply putty and red oxide primer and writting SM/MES No. in white letter all as directed.

S & F in repair of MS chequered plate thickness 6 mm FE -410-W E-250 gde of quality 'A' grade for covering on the cable duct. The plate shall be painted with two coats of black enamel paint over a coat of red oxide primer all as specified and directed.

M&L loose filling with stone aggregates of 40mm size in substations, around 4 pole/6 pole structures all as specified and directed. (The contractor has to stack the gravel/stones near the substation as directed for necessary measurement and instructions ).

Taking out LT UG cable from any type of soil Cable under ground LT any size complete all as specified and directed.

M & L for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade of cross sectional area 10 Sqmm 4 core complete all as specified and directed.

M & L for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade of cross sectional area 10 Sqmm 2 core complete all as specified and directed.

M & L for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade of cross sectional area 16 Sqmm 4 core complete all as specified and directed.

M & L for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade of cross sectional area 25 Sqmm 4 core complete all as specified and directed.

M & L for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade of cross sectional area 35 Sqmm 3.5 core complete all as specified and directed.

M & L for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade of cross sectional area 70 Sqmm 3.5 core complete all as specified and directed.

Excavation in trenches n.exc 1.5 m deep and n.exc 1.5 m wide and getting it out in hard/dense soil for erection of pole.

All as per Item No. 11.00 above but in soft disintegreted rock/ laterite rock

Returning filling in excavated earth work including spreading, levelling, watering and well ramming in layers n.exc 25cm thick in any strata

Removing excavated soil to a distance n.exc 50m, depositing where directed at a level n.exc 1.5M above the starting point

Supply/ Lay dry river sand/M-Sand in trenches for cable protection All as SSR Part I. NOTE : Punned thickness only will be measured & Paid

Supply and lay cable cover LV type 1 flat size 250 X 150 X 40 mm

M & L GI tubing light grade of 40 mm dia under road crossing on pole/wall for protection of cables including taking out of old one.

M & L GI tubing light grade of 80 mm dia under road crossing on pole/wall for protection of cables including taking out of old one.

M &L brick work in repair with burnt bricks best quality locally available bricks old size laid staright or curved on plan to any radius built in cement mortar 1:4 complete all as directed including dismantling old disturbed surfaces

M &L rendering in 10mm thick on fair faces of brick work in cement mortar 1:4 and finish the surface fair and even complete all as directed.

Dismantling cross-arms of M.S. channel or angle sections etc. complete and setting aside for re-use with in 50m

Material & Labour for steel cross arms,angles,bracing supports,clamps and back plates fabricated from structual steel sections including nut bolts washers welding bending colr or hot drilling hole for bolts in any shapes or size as indicated or directed and inclusive of one primer coat and one finishing coat of silver paint.

Taking down carefully aluminium conductor of any size from LT OH Lines after unbinding from insulators for replacement of multijointed / undersize conductors.

Material & Labour for ACSR Conductor steel reinforced incl stringing through existing RCC poles, fixing in insulators, jumpers with polythene pipe, aluminium binding wire etc complete connection all as specified and directed.

Removing grass and bushes growing including grass root at Substation yard and keep the sub station yard neat and clean complete all as specified and as directed.

M&L in repair danger notice plate of 1 : 6 mm thick mild steel sheet vitereous enamelled in signal red colour with white letters in English figures ,conventional skull and bones and fixed with MS clamps, bolts and nuts of approved size for LT, 20 x 15 cm.

All as per above item No 26.00 but of size 25 x 20 cm.for HT

M&L for Cable route markers made of cast iron 10 mm thick 6" dia with "LT / HT Cable" mark and indication of direction and in casting welded to angle iron 40x40x6mm, 450mm long embedded in PCC block 1:2:4 B1 (20mm aggregate) of size 150x150x300mm deep complete all as directed.

Supply only HT type Insulating Tape non heat shrinkable type of 38 mm width and 10 Mtr length.

Supply and fix in repair Digital type Panel mounted type Power Factor (PF) meter 96 x 96 Sqmm size flush mounting case measurement range zero Lag-unity-zero lead, universal auxilary supply 80 to 300 V AC/DC, 3 phase, accuracy +/-0.01 Make : Legrand / L&T/ AE

Supply and fix in repair Digital type Panel mounted type Voltmeter 96 x 96 Sqmm size flush mounting case measurement voltage range for KV & V, universal auxilary supply 80 to 300 V AC/DC, 3 phase, Class 1.0 with auto scroll facility all as directed. Make : Legrand / L&T/ AE

Supply and fix in repair Digital type Panel mounted type Ammeter 96 x 96 Sqmm size flush mounting case measurement voltage range for KA & A, universal auxilary supply 80 to 300 V AC/DC, 3 phase, Class 1.0 with auto scroll facility all as directed. Make : Legrand / L&T/ AE

Supply and fix in repair Digital type Panel mounted type Multifunction Energy meter with 3 line LED display 96 x 96 Sqmm size flush mounting case 3P3W / 3P4W and -/5A CONFIGURABLE WITHOUT COMMUNICATION PORT, universal auxilary supply 80 to 300 V AC/DC, 3 phase, Class 1.0 with auto scroll facility all as directed. Make : Legrand / L&T/ AE

Repar to LT Panel board/ Feeder piller/ APFC panels of 2mm thick MS sheet including all petty parts including nut, bolts, gasket and minor weldings /patch work complete all as specified and as directed.

Taking down street light fitting or flood light, garden lights fitting any type and rating from poles, walls or any other indicated situation/ location including removal of GI bracket pipe as directed, after disconnecting electrically. and unservicable fittings and accessories from site.

Supply and fix in repair Intergral LED Flood Light Luminaire 150 W WARM WHITE LED floodlight luminaire with ultra sleek, light weight and with secondary optics, made of pressure die-cast housings with IP66 ingress LED floodlight luminaire with ultra sleek, light weight and with secondary optics, made of pressure die-cast housings with IP66 ingress protection and impact resistance of IK07. 4kV inbuilt and 10kV* external surge protection. Including all accessories, all as specified and directed Make: Bajaj, Model- LED FORCE Flood light, part No: BJFL 120W LED I WW or equivalent in Philips/Wipro /crompton

Supply and fix in repair Intergral LED post Top Gate/ Garden light 25 W made in die-cast aluminium housing with decorative clear opal acrylic diffuser and IP 65 protection. Luminaire 25 W Comprises housing with LEDs and driver. Glare-free and better uniformity and Heat resistant toughened glass with frame suitably gasketed for IP 65 Class I protection including all accessories, all as specified and directed. Make: Bajaj, Model- LED Post top, part No: BGCTN 25W LED WW LED or equivalent in Philips/Wipro/ crompton

Supply & Fix in repair 25 W LED Solar Standalone Streetlight System of 2 days backup consists of Solar LED Luminiare, Solar Panel, Solar maintenence Free Battery, GI 6mtr GI Pole complete all as specified and direceted. Make: Bajaj Model part No 25W ALL-IN-ONE STANDARD or equivalent in Philips/Wipro/ Tata

Supply and fix in repairs cable junction boxes IP 66/69 protected “halogen free and weather proof” suitable for out door type ( with metric knockouts for cable entry) of size 155 x 210 x 92 mm mm mm incl necessary suitable size new backelite connecting terminals mounted on saddles suitable for 3 phase with neutral system - 04 Nos of suitable length and thickness and connecting the incoming & out going LT cable connections in the terminal block of junction box and fixing clamps made up of GI flat of size 32 x 6 mm of suitable length-02 Sets, incl GI nut and bolt and washers on poles complete all as directed. Make : Hensal Model NO : KF 1600B/schneider/siemens or equivalent

Taking down/Dismantling insulators carefully any type, any size

S & F in repair Pin type porcelian vitreous brown or white insulator to suitable for 1100 Volt working pressure of size 100 mm height, 65 mm dia including one galvanised mild steel spindle, two galvanised iron washer and one GI nut complete including dismantling existing old insulator from position.

S & F in repair shackle type porcelian vitreous brown or white 1100 Voltof size, 115 mm dia and 100mm height including GI strap of size of 31 x 5 mm insulator bolt of 14mm dia, nuts and washers for working pressure 1100 V complete incuding dismantling existing old insulator from position.

Supply and fixing chain link fencing including line wire , mesh of any size and type of standard , Flat iron for holding the chain link fencing, rails straining bolts, flat iron fillets for securing wire mesh incl all necessary drilling, bolting etc as specified and directed.

M&L for surface dressing n.exc 15 cm deep in hard/dense soil for making PCC pathway etc as specified.

M&L PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation filling and mass concrete etc complete for pole foundation, Pathway and stay assembly etc as specified.

M&L PCC 1:2:4 type D-2 using 20mm graded stone aggregate for copying of poles and smooth finishing without using extra cement.

Dismantling concrete poles of size 9mtr size after carefully unbinding ACSR conductor from insulators or LT Cable and transporting to store complete all as specified and directed.

M&L in repair and erection of RCC pole, 9 m long, 102mm x 152mm at top and 102mm x 289mm at bottom, confirmed to IS 785-1998 , erected in position all as directed complete

M&L in repair and erection of RCC poles 11 mtrs long 152 mm x 152 mm at top and 152 mm x 260 mm at bottom confirmed to IS 785-1998, erected in position all as directed complete

Dismantling and removing of GI earth wire and cradle guard from existing position.

M&L for GI wire 4 mm dia (8 SWG) on poles to continuous earth wire and cradle guard etc.

Supply only aluminium binding wire of not less than 0.9mm dia for tightening the conductors on poles complete.

Dismantling stay assembly complete.

M&L for stay assembly complete 20mm dia stay rod with accessories shown in electric plate No 01 ( loop type insulator, stay clamp, excavation and concrete measured separately)

M&L for Galvanised Stay wire of size 7/4 mm incl dismantling old wire.

M&L for loop insulator Vitreous Porcelian white or brown of size 90 x 140 mm clearance hole 25.5 mm including dismantling old existing one

M&L preparation of old painted surfaces of cross arm, channels and clamps section size up to 100x50 mm, clamps etc and applying one coat of zinc chromiium primer and 2 coats of Aluminium paint for cross arms any numbers of each pole incl clapms etc all as directed

Supply only fibre glass discharge rod suitable for 11 KV working pressure including all accessories.

Supply only fibre glass discharge rod suitable for 33 KV working pressure including all accessories.

Cutting and trimming of tree branches 3 mtr all around of any size obstructing lumination of street light and touching LT / HT Over head line incl removing trimmed tree branches.

Supply and fix 2.5 Sqmm three core PVC insulated and PVC sheathed multistranded Aluminium conductor cable 1100 Volt grade draw from junction box / OH ACSR to street light fitting complete all as specified and as directed.

Re- Stringing only existing LT OH line including dismantling of existing old binding wire complete. Note: (a) Restringing of 2 wires shall be measured as one RM (b) Supply only binding wire shall be measured and paid separately.

M&L for preparation of old cement coated surface, cleaning the surface of the RCC pole above the ground level incl coping area with 2 coats of ACC exterior Emulsion paint over a coat of cement primer after preparation of surface including 12 cm black paint around the pole. Marking of pole No with white enamel paint over black paint of dia 10cm, Repainting the remaining pole and iron parts i.e U clamps, MS Channels etc above 1.5mtr height by applying one coat of alumn paint all as specfied at site or directed by Engr-in-Charge.

Supply and fix in repairs LT line rigid type PVC spacer 4 Wire spiral type all as specified and directed.

Supply only Long range rechargeable type LED Night Search Light Trio 550 USB Rechargeable LED Handlamp of 550 lumens and having light beam of 600 meters. Run time 3 to 7 hours, IP rating IP-54 etc all as directed. Make : Trio 550 & equivalent

M&L for Cable Joint / junction route markers made of PCC Slab 100 mm thick of size 250 x 600 mm with " LT / HT CABLE JOINT" mark and embedded in PCC 1:2:4 B1 (20mm aggregate) of size 300x300 and 300mm deep complete all as directed.

Supply and install of Display board/ informatory sign board for Electric Supply Layout Diagram board of size 2 Mtr x 1 Mtr for sub stations building at 33 KV MRS Nofra and 11 KV Varunapuri Substn, made with aluminium frame and single side printed the Drgs and letters on PVC base sheet 3mm thick suitable for hanging on wall as specified and directed. Note:- Matter for printing will be provided by Department

Supply and install of Information board of size 25cm x 20cm made with PVC base sheet 3mm thick and single side printed / sticker of letters on suitable size for hanging on pole with required clamps or pasting on Panels for Substation yard structure poles and Substation Indoor and Outdoor panels, as specified and directed. Note:- Matter for printing/sticker will be provided by Department.

Supply and installation of electrical high voltage insulating safety mat 2.5 mm thick + 10% as per IS - 15652-2006 for sub station and control panel with ISI mark suitable for and up to 11 KV class B insulation pasted on floor complete all as specified and directed.

Supply and fix in repair 2 pole contactor 25 Amps per pole for street light panel complete all as specified and as directed.

Supply and install First Aid Box of adequate size and shape equipped with all medicines and equipments required for first aid complete all as specified and all as directed.

Supply and install of electric shock treatment chart of 1Mtr x 1 Mtr (for sub stations) printed on PVC base sheet to be printed in colour in english and in regional language to be displayed on wall as specified and directed.

Prabha Electricals and Communications

S and G Constructions

Shine Enterprises

star freeze service