Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.7 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹21.2 L+₹1.2 L (5.88%)Rejected-Finance | L2 | Rejected-Finance other than lowest | |
| 3 | L3₹22.0 L+₹2.0 L (9.87%)Rejected-Finance | L3 | Rejected-Finance other than lowest | |
| 4 | L4₹23.9 L+₹3.9 L (19.6%)Rejected-Finance | L4 | Rejected-Finance other than lowest | |
| 5 | L5₹23.9 L+₹3.9 L (19.7%)Rejected-Finance FLAT NO 330 PKT 1 SECTOR 1 DWARKA NEW DELHI 110 075 | NEW DELHI | NEW DELHI | DELHI | 110075 | L5 | Rejected-Finance other than lowest |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
15 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE North Delhi Cantt-10
GE North Delhi Cantt-10
WELCOME MAINT AND OTHER MISC WORK IN OFFRS MD ACCN AT KIRBY PLACE UNDER AGE BR I OF GE NORTH DELHI CANTT10
2023_MES_590981_1
GE/NORTH-05/2023-24
Open Tender
Civil Works
Item Rate
180 days
GE North Delhi Cantt-10
As per NIT
8 documents required · 8 mandatory
₹500
Yes
GE North Delhi Cantt-10
₹80,000
Yes
23 May 2023
24 Apr 2023
17 May 2023
24 Apr 2023
15 May 2023
8 May 2023
Amount
Preparation of old surface after complete removal of existing treatment applying 1mm thick wall care putty and making the surface smooth and applying two coats of oil bound distemper complete all as specified & directed. Note:- OBD shall be done with roller of required size instead of brush
M&L for preparation of old decorated plastered or unplastered surfaces of wall and applying two coats of oil bound distemper complete all as specified and directed Note:- OBD shall be done with roller of required size instead of brush .
M&L for complete removal of existing treatment and preparing plastered or uplastered surface and applying 2 coats of plastic emulsion paint over 1 mm thick wall care putty complete all as specified and directed Note: Plastic emulsion paint shall be done with roller of required size instead of brush) .
M&L two coats of colour wash on surface of wall including preparation of old plastered surface complete all as specified and directed
M&L two coats of white wash on surface of ceiling including preparation of old plastered surface complete all as specified and directed
M&L for one coat of synthetic enamel paint on old steel painted surfaces including preparation of surfaces of any description not otherwise descriped over 10cm width or girth complete all as specified and directed.
M&L for one coat of synthetic enamel paint on old wooden painted surfaces including preparation of surfaces of any description not otherwise descriped over 10cm width or girth complete all as specified and directed.
Demolition of cement concrete (un-reinforced) in ground floors and pavings n. exc. 15cm thickness (below or above ground level) complete all as specified and directed
Plain cement concrete M-10, nominal mix, type C-1, using 20mm graded mechanically crushed stone aggregate, 75mm thick as in plinth protection etc., surface finished even and smooth without using extra cement and laid to a slope of 1 in 24 in alternate panels n.exc. 1.20 Sqm each, 12mm wide and 5 cms deep joints shall be formed between the bays and shall be filled with mastic filling comprising a mixture of one part of heated blown bitumen VG-10 and two parts of heated coarse sand (by volume), all as specified & directed. Note:- The unit rate include for use of form work (straight or curved).
Taking down cement or cement plaster on brick walls/ceiling etc including raking out joints, hacking for key, scrubing down with water etc complete all as specified and directed.
M&L for ready mix plaster of 15mm thick on brick or concrete surfaces, internal or external wall including necessary cement slurry with bulk density 1.40 to 1.70 kg, water ratio 17 to 19% by weight & compressive strength as per IS 4031 Part 6 applied as per manufacturer complete all as specified and directed .
M&L for ready mix plaster of 10mm thick on brick or concrete surfaces, ceiling including necessary cement slurry with bulk density 1.40 to 1.70 kg, water ratio 17 to 19% by weight & compressive strength as per IS 4031 Part 6 applied as per manufacturer complete all as specified and directed .
M&L preparation of newly plastered surface of walls and applying two coat of Oil Bound Distemper over a coat of primer complete all as specified and directed.
M&L for preparing newly plastered surfaces of ceilling and applying three coats of white wash complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or discription) from wooden frame or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.
Supply and fixing 3mm thick ordinary sheet glass and glazing with oil putty complete in squares not exc 0.50 Sqm each pane complete all as specified and as directed.
S&F in repair Oval wash basin white, flat bottom (sample as in MAP offrs accn) including brackets, waste fitting 32mm dia brass chromium plated push type coupling with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed complete all as specified and directed.
S&F in repairs 500 ltrs capacity rotational molded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted of three layer and fixed in position including dismantling existing water tanks and removing to stores etc all as specified and directed.
S&F in repairs fancy type stainless steel curtain rods powder coated polished 20mm dia including brackets and finale and connected items complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.
M&L non skid ceramic tiles colored tiles 7 to 8mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floor etc set and jointed in neat cement slurry and pointed in colour cement laid over and including 15mm thick cement mortar screed bed in CM 1:6 complete all as specified and directed.
M&L for Vitrified designer glazed coloured tiles 8 to 9mm thick (square/rectangular), area of each tile n. exc 0.36 sqm as in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the surface over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.
M&L glazed digital vitrified tiles (DVT) colour and shed as approved in vertical surface of size 450 x 300 x 7 to 8 mm thick with highlighter set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including rendering 10mm thick in CM 1:4 and finished rough, complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) of wooden/steel n.exc 1.5 sqm.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) of wooden/steel exc 1.5 sqm but n.exc 4 sqm each
S&F aluminium powder coated three track window (two shutters glazed & one shutters wire gauge) with frame, glazed with 4mm thick tinted glass and wire guage with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm including rubber bead joining cleat for fixing in position, concealed type lock for all three shutter, PVC roller etc all as specified below:- (a) Frame (top & side) section shall of size 92.00 x 31.75 x 1.50mm. (Section No 21447) (b) Frame (bottom) section shall of size 92.00 x 31.75 x 1.50mm. (Section No 21446) (c) Top & side members of shutter section shall be of size 18.00 x 40.00 x 1.50mm. (Section No 21455) (d) Interlock Section of Shutter shall be of size 18.00 x 40.00 x 1.50mm. (Section No 21454) (e) Bottom Members of shutter section shall be of size 18.00 x 40.00 x 1.50mm. (Section No 20844) (f) Each opening shall be fixed with Guard bar made up of stainless steel hollow tubes of size 1''x1'' in horizontal as well as vertical direction each at 15 cm c/c with pheriphery surrounded with 40 x 5 mm stainless steel flat.
M&L 40mm thick, plain framed, flush shutters with block board core and plywood face panel , commercial type both sides complete all as specified and directed.
S&F 35mm thick 2nd class HW glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc(with out sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauze etc size of members as specified in SSR part-I, section 8, clause 8.24(a)
S&F galvanised mild steel wire cloth cut to size, 0.56mm nominal dia wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staple complete all as specified .
M&L for two coats of synthetic enamel paint on new wooden painted surfaces over a coat of pink primer including preparation of surfaces of any description not otherwise descriped over 10cm width or grith complete all as specified and directed.
S&F solid PVC Door frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, Supplying & fixing in opening as per specification and drawing.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & Bottom rails. MS frames shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement.
Taking down 15mm dia steel tubing and connection complete all as specified
Taking down 20mm dia steel tubing and connection complete all as specified
M&L for steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore 15mm complete all as specified and directed.
S&F steel water tubing medium grade galvanised with all fittings including short lengths, laid in trenches complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia 20mm complete all as specified and directed.
S&F in repairs stop valve, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 20mm bore complete all as specified and directed.
S&F in repairs water closet squatting pan "Orissa pattern" 580mm x 440mm, white with integral foot rests including fixing of flushing cistern, connection to trap, anti syphonage pipe etc including provision of lime concrete bedding complete all as specified and directed.
S&F in repairs vitreous China wash basin, white, flat back, padestal patern size 550mm x 400mm including tap, chain, plug brackets, waste fitting 32mm dia ,brass chromimium plated for glazed ware sink, basin,with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed complete all as specified.
S&F in repairs PVC low level flushing cistern 10 ltrs capacity incl PVC float valves, and out let pipes complete all as specified and directed.
S&F in repairs angular stop valve cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed for 15mm dia pipe, complete all as specified and directed.
S&F in repairs bib tap cast copper alloy with crutch or butter fly handle, screwed down, screwed for iron pipe of size 15mm bore chromium plated complete all as specified and directed.
S&F in repairs Chromium plate tubular towel rail, 20mm dia, D type, 60cm long between flanges . all as specified.
S&F PVC connections 15mm size with PTMT nuts of length 450 mm.
S&F in repairs plate rack made of stainless steel 1mm thick of size 600 x 750 x 550mm including fixing as per manufacturer's instruction complete all as specified and directed.
S&F mild steel butt hinges medium weight cold rolled 100mm long complete all as specified and directed.
S&F aluminium anodised barrel tower bolt of extruded section and fixed lengtth of bolt 150mm complete all as specified and directed.
S&F aluminium handle, cast type anodised size of handle 150mm complete all as specified and directed.
S&F in repairs for Gypsum ceiling board for ceiling prepainted, perforated finish, 600 x 600 x 9 to 9.5mm thick in size, of approved brand/make, laid over and including grid work of size 600 x 600mm, made out of 0.5mm thick G.I. tee 32 x 24mm for main, 25 x 24mm for cross tee and 20 x 20mm angle fixed on wall, powder coated finish on exposed faces of tee and angle. hung from ceiling using 2mm thick G.I. Suspension wires spaced at 1200mm on main runners including making niches for fans/light at as specified and directed.
S&F in repairs snow white vitreous china EWC single peice type 700 x 370 x 645mm including seat cover and flush fittings complete fixed in floor with brass screw complete complete all as specified and directed.
S&F in repairs shower rose fancy type bass chromium plated 125mm heavy duty pattern with swivel joints type screwed for 15mm bore including jointing to pipe or unions complete all as specifed and directed.
S&F in repairs CP hand spray (health faucet with 1.5m long easy flex tube in chrome finish and wall hook) complete all as specified and directed.
S&F in repairs 2 in 1 angle valve 15mm CP fancy pattern type cast copper alloy screwed for iron pipe or forbrass ferrule and fixed all as specified and as directed
S&F in repairs chromium plated jet for WC with 1.00m long PVC pipe including necessary fittings complete all as specified and directed.
M&L for granite Z BLACK Colour (table rubbed and polished) window cill, cooking plateforms and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of granite including 15mm thick rendering in CM 1:4 as backing coat for receiving of granite complete all as specified and directed.
M&L for 18mm thick PVC sheet for kitchen cabinet and cubboard consisting of carcass one side decorative lamination and other side balancing white fixed with approved adhesive and self tapping screws for kitchen cup board or wardrobe all as specified and directed
M&L for 6mm thick PVC sheet for kitchen cabinet and cubboard consisting of carcass one side decorative lamination and other side balancing white fixed with approved adhesive and self tapping screws for kitchen cup board or wardrobe all as specified and directed
S&F for 20mm wide & 1mm thick PVC edge beading pasted to edges of PVC furniture with suitable adhesive for kitchen cup board or wardrobe complete all as specified and directed
S&F stainless steel handle 100mm fancy type for cub board shutter complete all as specified and directed
S&F continuous (Piano) hinges, brass, 30mm width of flaps (when open).
S&F soft close heavy duty slow motion hinge steel nickel plated, 4 hole mounting plate, half overlay adjustment height/ depth fixed in repairs completed all as specifed and directed.
S&F soft close heavy duty steel nickel plated telescopic drawer channel size 20 inch full extension load capacity 50 Kgs including fixing arrangement to drawer/ baskets etc completed all as specified and directed.
S&F mild steel magnetic catches and striking plate of 50mm size for kitchen cup board or wardrobe fixed with screw including letting in and fixed completed all as specified and directed.
M&L mild steel conforming to Fe 410-0 or Fe 310-0 in framed work such as grills, gratings, ladder, hinges, door frame, desert cooler stand etc with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; ladders; railings, coolar stand and similar work completed all as specified and directed.
M&L applying two coats of synthetic enamel paint on new steel surfaces of any description over 10cm width or girth over a coat of red oxide primer including preparation of steel surfaces completed all as specified and directed.
Dismantaling of existing boarding including fitting fixture etc fixed with screw completed all as specified and directed.
M&L cement concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in lintels upto 1.5m clear span cills, holdfasts, steps, seismic and other similar bands, plinth courses, string courses lacing courses parapets and railings upto 60 cm in height copings, kneelers apex stones, bed plates,kerb not provided for water troughs and the like including weathering slightly rounded or chamfered angles and throating completed all as specified and directed.
DEEP ASSOCIATES
SARTHEE CONSTRUCTION CO.
Keshav Brothers
The new hut furnitures
M/S AADI ENTERPRISES
ANSH VANSH CONSTRUCTION COMPANY
Paradise Interior
HANUMAN BUILDERS
R. S. Associates
STAR CONSTRUCTION CO
M/S Yamin
GIR RAJ BUILDERS
QUALITY CONSTRUCTIONS CO
M/S GEETANJALI ENTERPRISES
DEV CONSTRUCTION
S GOURAV PRAKASH ENTERPRISES
stage.html
html • 0.09 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .