BID NO-UED/231/2025-26

ERECTION PART HT LINE

Stringing and sagging conductor:- Laying of conductor stringing and sagging, binding with insulator complete in all respect.

Laying of G.I Wire, Stringing, Sagging and binding complete in all respect.

Fixing jumper complete in all respect.

GO and DO Switch complete in all respect.

ERECTION PART 11/0.4kV,100 KVA Sub-Station

Erection of100 kva S/Stn. Str.:-Digging of Pit for S/T Pole and earthing, drilling of holes in X-arm, preparation of plate form str. Member CI, Alluminium Paint AI i.e X-arml, Knee bracing set, erection of D-pole,errection of plate form, ercetion of x-Arm, drop out, fuse unit, linghting arrestor, MCCB Switch of LT Box, Energy Meter, Erection of T/F, and earthing conn. to T/F G.O Switch lightning etc. erection of Stay Set, Erection of Jumper, Pipe earthing 3 Nos., Erection of LT cable, brabed wire and painting, 3 Nos. earthing to S/Stn. by prov. 50Kg Salt charcole in each earthing i/c construction of trench for earthing as per REC Board Standard complete in all respect.

Erection of CT/PT S/Stn at the str. Of DTR-

Mannual carriage from road to site ,transportation charges from central store to site and loading- unloading in all respect (IN ALL HEAD) average distance at site

Providing and Fixing wooven mesh fencing along with Gate & locking arrangement (for more detail check attached drawing and measurement detail)

Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand) : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement- All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand): 3 graded stone aggregate 20 mm nominal size)

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. wherever required, all complete In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge Made of G.I. wire of dia 4 mm

Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete 100x58x1.90 mm

Providing and fixing ISI markedoxidisedM.S. sliding door bolts with nuts and screws etc. complete : 250x16 mm

SUPPLY PART. HT Line

Prov.AAAC 7/4.26 mm Conductor (Provided By HPSEBL)

Prov.G.I.Wire No. 8 SWG in mtr. (Provided By HPSEBL)

Prov.Nuts and Bolts of Various Sizes

GO AB Switch Unit (11kV, 400A, 25 KA) Tripple pole O/D type

D.O Fuse Unit

Supply PART 11/0.4kV,100 KVA Sub-Station (

Distribution Transformer (Ordinary) 11/0.4 KV, 100KVA (Provided By HPSEBL)

Steel Tubular Poles (11 m, Working load>200Kgf/m2) (Provided By HPSEBL)

Muffs with concrete filling

X-Arm (Channel Iron (100X50X6mm) Length 2800mm X 2 No's) for incomer Line.

MS Angle Iron (50X50X5mm) Length 2800mm x1 No's for LA's .

X-Arm (Channel Iron (75X40X6mm) Length: ( 2800mm x 4 No's) for supporting DO fuse unit & GO switch

Transformer and CT/PT Belting & Knee Bracing

X-Arm: [Channel Iron (100x50x6 mm), Length : 2800 mm X 2 Nos] for Transformer Bed and CT/PT Bed

X-Arm [Channel Iron (100x50x6 mm), Length : (460 mm) x 2 Nos for supporting Main Channel of Transformer] and CT/PT

MS Angle Iron (50X50x6 mm), Length : (2800 mm) x 2 Nos

MS Angle Iron (35X35x5 mm), Length : (460 ) x 2 Nos

MS Angle Iron (50X50x6 mm), Length : (950 mm) x 2 Nos for Bed Knee Bracing

Transformer LT Distribution Box and GO Switch fixing Assembly

MS Angle Iron (50X50x6 mm), Length: (2800 mm) x 2 Nos

MS Angle Iron (50X50x6 mm), Length: (450 mm) x 1 Nos

GO Switch Handle Supporting: [Channel Iron (75x40x6 mm), Length: 460 mm

GO AB Switch Unit (11kV, 400A, 25 KA) Tripple pole O/D type

D.O Fuse Unit

Surge Arrester, 9 kV Station Class (Porcelain Type)

Discs insulator sets (comprising 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.)

HP ProOne 440 23.8-inch G9 (Intel i5 Processor), 23” or higher All-in-One Desktop PC (1.) Processor-(Intel Core i5 13500 Processor: Core- 14 Thread- 20 Cache- 24 MB Base Power-65 W Or higher/latest). (2.) Chipset- Q series. (3.) Operating System- Windows 11 Pro 64-bit factory preloaded. (4.) Out of Band Management- Intel vPro. (5.) Memory-8 GB DDR5-4800 MHz or higher expandable up to 64 GB or higher, having 2 DIMM Slots. (6.) Processor Generation-13th Generation or higher. (7.) Storage-512 GB NVMe SSD or higher (8.) Optical Device- DVD R/W drive (Optional). (9.) Graphics- Intel Integrated HD Graphics. (10.) Webcam- FHD 5MP webcam. (11.) Security- TPM 2.0.(12.) Connectivity-802.1 1b/g/n/ac/ax 802.11bgn, Bluetooth 5.0.(13.) I/O Ports- (5) USB 3.2 (1) Combo Jack Microphone/Headphone (1) USB-C © 3.2 (1) DisplayPort 1.4a (1) HDMI Port 1.4b Card Reader) (14.)- Green Certifications- Energy Star Certified/ EPEAT Registered/ RoHS/WEEE/REACH/BIS. (15.) Keyboard-104 Keys OEM English USB Keyboard same brand as that of PC (16.) Mouse- Plug-and-play USB mouse same brand as that of PC. (17.) Speaker- Internal speaker. (18.) Monitor- 23.8” (19) Warranty- Three years comprehensive onsite warranty. (20.) Additional features- Intrusion Sensor (integrated in the system board, can be enabled/ disabled through BIOS), HP Support Assistant, HP Smart Support, HP Sure Start, HP Tamper Lock, HP Sure Admin, HP Secure Erase. with printer

Stay set complete

Stay Wire (7/3.15 mm) (7.0 kg per Stay Set) (Provided By HPSEBL)

Pipe Earthing Set

LT Distribution Panel Box with MCCB (40A, 25 kA, 4P) and SFU (16A, 4No, rewirable)

Half Clamp (M.S. Flat 50X6 mm)

Full Clamps (M.S. Flat 50X6 mm)

Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm Φ or more (with flat and spring washers)]

Aluminium Thimble

Thimble copper 200 amps

Danger Plate

Barbed Wire

LT Cable (3.5 Core) 70 mm²

Aluminium Paint.

Prov.Red Oxide (1.5 Ltr. Per Pole)

Prov. CT-PT Combined Unit [PT:11 kV/110 V) ; CT:10-400/5A]

Prov.3-phase, 3/4-Wire CT-PT operated Static Trivector Meter (DLMS Compliant)

Prov. PVC Multistrand 4 mm² copper wire with Φ-1 inch GI pipe for concealing

Please Enable Macros to View BoQ information