Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.1 LAccepted-AOC NO 422 CHURCH STREET NEW THIPPASANDRA BANGALORE 560075 | BANGALORE | BANGALORE | KARNATAKA | 560075 | L1 | Accepted-AOC L1 bidder | |
| 2 | L2₹25.0 L+₹3.7 L (17.6%)Rejected-Finance 39 SR LAYOUT MAIN ROAD NAL WING TUNNEL ROAD MURUGESH PALYA BANGALORE 560 017 | BENGALURU URBAN | KARNATAKA | 560017 | L2 | Rejected-Finance Not Being L1 |
Tender Value
₹22 L
EMD Value
₹44,000
Closing Date
1 Jul 2023, 6:00 pmClosed
GE Central Bangalore
ASC CENTRE AND COLLEGE AGRAM POST BANGALORE 560007
CLEANING OF WATER TANKS AND CERTAIN MISC REPAIRS WORKS AT NGV KORAMANGALA AND VOC UNDER AGE B AND R II OF GE CENTRAL BANGALORE
2023_MES_593269_2
8289E
Open Tender
Civil Works - Others
Item Rate
270 days
GE Central Bangalore
Please refer tender documents
6 documents required · 6 mandatory
₹500
GE Central Bangalore
₹44,000
Yes
5 Aug 2023
13 Jun 2023
3 Jul 2023
13 Jun 2023
1 Jul 2023
14 Jun 2023
13 Jun 2023 - 13 Jun 2023
Amount
Taking down cement plaster of any description including racking out joints, hacking for key scrubbing down with water etcand removal of entire debris as ordered outside MD land complete all as directed.
Taking down chowkats or frames not exc 1.5 sqm each with shutters (without taking off shutters from frame) and stacking at site where directed.
Taking down shutter of any description area exceeding 1 Sqm but not exceeding 2 Sqm each and refixing in the same opening after cutting , easing and adjustmentas with old ll types of builders hardware complete all as directed.
Taking down shutter of any description exceeding 1 Sqm but not exceeding 2 Sqm each and stacking at site where directed.
All as per item No 4 here-in-above but exceeding 2 Sqm -do-
Supply only Integral Water Proofing Compound (ISI Marked) of Make : CICO , Acco Proof , Impermo , Aqua flex as approved.
S &F 35 mm thick second class hard wood factory made glazed and skeleton shutter open rebated and prepared to receive glass, guage etc edge of framing plain chamfered or rounded fitted with cut and mitred beads for securing guage etc size of members of shutter as specified in SSR Part I Section 8 clause 8.24 (a) supplied and fitted to chowkats.
S&F 35mm thick Flush shutters, solid core construction, with block coard core & plywood face panels commercial type on both side conforming to IS 2202 (Part- I) -1999, including internal liping beading all round fixed as in Door Shutter,Cup board shutter & Kitchen rack all as specified.
M&L in repairs for 18/19mm thick MDF board, exterior grade both sides with decorative choice lamination and 3mm thick teak wood beading/edging fixed with screws to timber frame work,as in wall mounted cabinets/racks complete, as specified and directed
S&F solid PVC door frame of size 50X47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification all as directed.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with plain colour single piece extruded PVC profile ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour single piece extruded PVC profile for top rail lock rail bottom rail on either side and as gap insert for Top rail and bottom rail paneling of plain colour PVC sheet to fitted on the MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified and as directed..
S & F150 mm long aluminium, anodised , barrel tower bolt (ISI marked) of extruded section and fixed.
S & F in repair150 mm long aluminium, anodised , barrel tower bolt (ISI marked) of extruded section and fixed.
S & F in repair 100 mm long aluminium, anodised , barrel tower bolt (ISI marked) of extruded section and fixed.
S&F100 mm size butt hinges, medium weight cold rolled mild steel and fixed .
S&F in repair 100 mm size butt hinges, medium weight cold rolled mild steel and fixed .
S&F in repair 150 mm size aluminium alloy handles (ISI Marked) fabricated type anodised and fixed.
S&F 150 mm size aluminium alloy handles (ISI Marked) fabricated type anodised and fixed.
S&F in repair 100 mm size aluminium alloy handles (ISI Marked) fabricated type anodised and fixed.
S&F 300 mm long aluminium alloy, anodised sliding door bolt (ISI Marked) with hasp, staple (bolt type) and fixing clip of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed.
S&F in repair 300 mm long aluminium alloy, anodised sliding door bolt (ISI Marked) with hasp, staple (bolt type) and fixing clip of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed.
S&F in repair 20mm dia aluminium anodised powder coated curtain rods/ towel / ward robe rod etc all as specified and directed.
S&F in repair aluminium anodised brackets powder coated for curtain/Towel/ Ward robe hanging rodall as specified and directed.
S & F for sheet glass shelf assembly consists of 5.5mm thick sheet glass 12cm wide with chromium platedbracket guard and railing 60cm long fixed with stainless steel brackets (L type).Make Prayag Cat no BEA-43 or equivalent in CERA
S & F for 300mm corner glass shelf assembly consists of 5.5mm thick sheet glass with chromium plated bracket guard and railing long fixed with stainless steel brackets (L type).Make prayag Cat No BEA-46 or equivalent in CERA.
S&F in repair hasp and staple of size 100mm aluminium anodized (ISI Marked) safety type with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified.
S&F in repair Mild steel powder coated body door stopper with hard drawn steel spring, 150mm size fixed to door all as directed.
S&F in repair mortice lock, 100mm size, brass, vertical type, 4 lever with minimum 2 keys all as directed.
S&F in repair brass cromium plated, 15mm dia hole, magic eye all as directed.
S & F in repair safety chain to door fixed with chromium plated screws complete all as directed.
S & F in repair 40mm dia brass cupboard knob, bright finished, fixed with nut, screw and washer complete of approved make and design as directed by Eng-in-charge.
S & F 30 mm width of flap Continous (Piano) hinges, mild steel, bright finish or electrogalvanised.
S&F in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long be-tween flanges complete all as directed including taking down old towel rail.
S&F in repair 0.71mm thick plain aluminium alloy sheet 31000 H4 in stepped flashing all as directed.
S&F in repairs stainless steel wire cloth, 0.24mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples including supply & fix second class hard wooden fillet, wrought, cross sectional area exceeding 3 Sqcm but n.exc 6 Sqcm fixed with nails complete all as directed.
S&F stainless steel wire cloth, 0.24mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples including supply & fix second class hard wooden fillet, wrought, cross sectional area exceeding 3 Sqcm but n.exc 6 Sqcm fixed with nails complete all as directed.
M & L for running welding in repairs thickness of metal to be welded n exc 6mm
M & L rendering 15 mm thick CM 1:6 on stone masonry surfaces other than fair face of brick work or one sided lathing finished followed by 10mm thick settting coat in CM 1: 6 mixed with WPC @ the weight of minimum 3% by weight of cement mixed or as per manufacturer instruction & finishing the surface even and smooth without using extra cement in walls complete all as specified and directed.(Note : WPC measured and paid separately.)
M&L for rendering 10 mm thick in CM 1:6 on brick work/ stone work or concrete surface work finished even and smooth without using extra cement complete all as specified.
M&L preparing of newly plastered wall surface and & applying two coats of cement base paint over a coat of alkaline resistant primer complete all as directecd.
M&L preparing new plastered wall surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer over a coat of 1-2 mm thick white cement based wall care putty as ordered complete all as specified.
Hacking out old broken glass (any thickness) and size from wooden frame glazed with putty or fixed with wooden beads and removal of debris to a distance n.exc 50 mtr and depositing where directed.
S&F sheet glass 4mm thick glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane complete all as directed.
S&F sheet glass 4mm thick figured glass, pin headed type and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane complete all as directed.
M & L Two coats of 1st quality synthetic enamel paint over a coat of pink primer on new wooden surface of any description over 10 cm in width or girth including necessary preparation of new wooden surface complete all as directed.
M & L for writing letters or figures ( Block Roman, Italic or indian) n exc 30cm high.
Taking down old 20 mm bore GI tubing and connection including cleaning for re fixing stacking at site where directed.
All as per item No 47 hereinbefore but 25 mm bore oof pipe -do-
S&F CPVC pipe SDR II having outer dia 20 mm pipe with plain CPVC SDR II fitting such as bends, elbows, unions and end pieces to receive the fittings and fixed with solvent cement in walls/ceilings (concealed/surface) or laying in floors complete all as specified
All as per Item No.58 here in above, but 20 mm outer dia pipe.
S&F health faucet ABS body with wall hook and 1.25 metre long SS braided rubber hose pipe and wall hook mounted type complete. Make: Prayag Cat No BEA-40 or equivalent in approved make.
Taking down bib tap, pillar cock, stop/angle cock, & shower rose etc for carrying out repair/ refixing the same in old position after cleaning, replacing washer, spindle and adjusting screws etc complete all as directed.
All as per item No 52 above/ here-in-before but for hot & cold mixing valves/taps.
S&F in repair 15mm dia. fancy type chromium plated Bib taps, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as directed.
S&F in repair 15mm dia. fancy type cast copper alloy chromium plated & concealed type Stop valves/ angle valve , screwed down, high pressure, screwed both ends for iron pipe or for unions complete all as directed..
S&F in repairs 15mm bore pillar tap, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks & fly nuts, screwed for iron pipes complete all as specified & as directed.
S & F in repairs brass, chromium plated, 15mm bore wall mixer for mixing hot and cold water, screwed down with provision of over head shower and cock for iron pipe and fixed complete all as specified and directed. Make: PRAYAG Cat No 8475 or equvelent of Make Hindware/Parryware/CERA
S & F in repair 2 way bib cock double handle with flange, cast copper alloy chromium plated, screwed down, suitable for 15mm bore iron pipe. Make: PRAYAG Cat No P6812 or equvelent of Make Hindware/Parryware/CERA
S&F Gun metal gate or gate valves with iron wheel head screwed box and both ends for iron pipe for 25 mm bore of pipe or union complete all as directed.
S&F in repairs brass chromium plated shower rose 125 mm dia with or wihout swivel joint, any size, including fixing to steel pipe or union.Make : CERA Cat No F 7020304 or equivalent of Make Hindware/Parryware/Prayag
S&F in repair sinks made of stainless steel ( gde 304) 1mm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size (Approximate) 560mm x 460mmx203mm bowl size 510mm x 405mmx203mm (Make: Prayag Cat No 1322D or equivelent of Parryware /Hindware/Cera)
S&F in repair bathroom mirror cabinet (PTMT) of size 430 x 330 mm fixed on wall with cadmium plated brass screws all as directed. Make :- Prayag (Cat Part No. 551) or equivalent of Commander (Jasmine) / Polytuf / Jindal / Parryware
Supply and fixing in repair 32mm dia waste fittings brass CP fixed to WHB complete all as spd and directed by Engg-in-Charge
All same as per item No 64 here-in-above but 40mm dia suitable for sink etc
S&F in repair PVC syphon with knob for PVC flushing cistern of 10 Ltr of capacity all as specified
Replacing old unserviceable steel brackets for wash hand basin (Flat or angle back) including cutting for pinning in end of 12mm dia bolt erecting stand, inlet and outlet screwed for pipe or connection including necessary packing all as directed.
S&F 32/40mm bore Low density polyyethylene (LDPE) pipes of pressure rating 6 kgf/Sqcm with connecting bracket fixed to waste coupling for basin/sinks complete all as specified and directed.
S & F in repair 110 mm bore, UPVC (SWR), Type 'B', Soil waste and vent pipes in any length without ears, with rubber ring joints laid in trenches complete all as specified and directed.
S & F in repair 75 mm bore, UPVC (SWR), Type 'B', Soil waste and vent pipes in any length without ears, with rubber ring joints laid in trenches complete all as specified and directed.
S & F in repair 110 mm bore, UPVC (SWR), Type 'B', Soil waste and vent pipes or for rain water pipe in any length without ears, with rubber ring joints fixed to wall using MS holder bat complete all as specified and directed.
S & F in repair 75 mm bore, UPVC (SWR), Type 'B', Soil waste and vent pipes or for rain water pipe in any length without ears, with rubber ring joints fixed to wall using MS holder bat complete all as specified and directed.
S & F 110 mm bore, PVC (SWR) bends of any radius complete all as specified and directed.
S & F 75 mm bore, PVC (SWR) bends of any radius complete all as specified and directed.
S&F PVC (SWR) branch piece single,(single Y) 110 mm dia equal or unequal with oval access door complete all as specified and directed.
S&F PVC (SWR) branch piece single,(single Y) 75 mm dia equal or unequal with oval access door complete all as specified and directed.
S&F PVC (SWR) branch piece (double Y) 110 mm dia equal or unequal with oval access door complete all as specified and directed.
S&F PVC (SWR) branch piece (double Y) 75 mm dia equal or unequal with oval access door complete all as specified and directed.
S&F 550 mm X 400 mm size white flat back vitreous china wash hand basin including chromium plated pillar tap (Make: CERA Cat No. S1053101/S1053102 6502) cap stain head suitable for 15 mm bore of pipe , PVC connection 15 mm dia 45 cm long with chromium plated nuts and bolts and suitable washers, PVC waste 32 bore CP waste coupling chain and plug , porcelain stopper including CI bracket fixed in repair complete all as diirected.
S & F in repairs PVC seat cover for EWC white / Black colour complete with MS Hinged cromium plated make as per existing all as specified and as directed
S&F in repair steel chromium plated gratings, circular type, 125mm dia with or without waste hole fixed to existing traps with white cement complete all as directed.
S & F in repairs, vitreous China wash down water closet pan (pedestal pattern), white, including connection to outgoing drain and 32mm dia flush pipe,flushing pipe, anti syphonic pipe with and including white PVC seat and cover closed pattern with flat bottom and MS chromium plated hinging device including provision of 10 ltr capacity low level PVC Flushing cistern, PVC connection pipe, 15 mm dia, 600 mm long complete including making good damaged/disturbed surfaces complete all as specified and directed. Make of Pan CERA Cat No S1053101/S1053102 and of cistern B1010109 or equivelent of Parryware/Hindware/Prayag
S&F in repairs 10 liters capacity PVC valveless, syphonic action type, flushing cistern, low level, white with inlet ball valve, float and handle including brackets and flush pipe of polyetylene of low or high density or 32 mm dia PVC connection pipe complete all as directed.Make of cistern CERA Cat No B1010109 or equivelant of PARRYWARE/HINDWARE/PRAYAG
&F in repairs stainless steel Kitchen plate rack of overall minimum size 900mm x 750mm and 250mm deep, with partitions for small/large plates etc made out of stainless steel 24 Gauge, fixed with rawl plug and CP steel screws all as directed. Note : Weight of rack shall not be less than 6.00 Kg. Make PRAYAG Cat No P-348 or equivelent of Nirali/Diamond
M & L for Cleaning & removing all dirt and scale from water storage tank of capacity exe 250 ltr and n.exe 500 ltr hoisted & fixed in any description & height and also from mouth of pipe of tank comple to satiisfaction of Engiineer-in-chharge .
Disconnecting existing tanks, setting aside ( for lowering if required) for repairs, cleaning,etc and hoisting if required reconnecting and refixing in positing including cleaning and removing all scale and dirt,etc from tanks and from mouths of circulating pipes. ( Capacity exc 500 but n exc 1000ltrs)
Dismantling of existing any type & any capacity water storage tank fixed in any description and stacking at site and S&F new 500 litres capacity (white colour) rotational moulded polythene water storage tank, (cylindrical vertical with close top) triple layer colour white both inside and outside with top cover including PVC float valve high pressure suitable for 20 mm bore of pipe with polythene float, fixture hoisted and fixed in position where ordered and making necessary connection and testing complete all as directed.
Dismantling of existing any type & any capacity water storage tank fixed in any description and stacking at site and S&F new 1000 litres capacity (white colour) rotational moulded polythene water storage tank, (cylindrical vertical with close top) triple layer colour white both inside and outside with top cover including PVC float valve high pressure suitable for 25 mm bore of pipe with polythene float, fixture hoisted and fixed in position where ordered and making necessary connection and testing complete all as directed.
S&F in repairs 25 mm ball valves, high pressure with polyethylene float and flynut complete screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.
Removing complete shrubs/ vegetation upto root grown in any description such as grown in wall / beam / roof /chajja etc in height up to three storey building including filling the holes where the shurbs removed with cement concrete 1:2:4 type B-0 (12.5mm graded stone aggregate) of minimum size 15cm x15cm x 15cm or as required and making good the distured surface as per its original specification to the satisfaction Engineer-in-charge& removal of the taken out shurbs out of MD land and disposed complete all as directed.
GKR and CO
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .