Providing barricading in counting hall and make shift arrangements at Government Polytechnic Panaji for Lok Sabha Election 2024 North Goa Parliamentary Constituency

Amount

CIVIL WORKS

Earthwork in excavation by mechanical means (hydraulic excavator)/manual means in foundation pipeline trenches drain (not exceeding 1.5 m in width or 10 sq.m. on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m.b)All types of Ordinary rock including all types of laterite rock, blasting prohibited

Providing and laying in position ready mixed concrete (RMC) with usage of Ordinary Portland Cement manufactured in fully automatic batching plant and transported to site of work in transit mixer for a lead upto 10kms having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C., from the transit mixer to the site of laying, excluding the cost of centering, shuttering, finishing and reinforcement including the cost of admixtures in recommended porportions as per IS : 9103 to accelerate/retard setting of concrete, improve workability without imparing strength and durability as per the directions of the engineer-in-charge. All works upto floor V level iv M-25 grade of concrete

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) (Square Hollow Section (SHS) IS4923 /Rectangular Hollow Section (RHS) IS4923/ Circular Hollow Section (CHS) IS1161 closed Structural Steel of (SAIL, TATA. VIZAG, JSW ,APOLLO Steel Ltd.) make (Min Yeild Stress 310 Mpa)) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.

Steel work in single sections (SAIL, TATA. VIZAG & using electrodes of Ador or ES4B or Deh Secheron make only) including cutting, hoisting fixing in position and applying a priming coat of red lead paint. B) In flats of all sizes

Steel work welded (SAIL, TATA. VIZAG & using electrodes of Ador or ES4B or Deh Secheron make only)in built up sections trusses and framed work including cutting, hoisting, fixing in position and applying priming coat of red lead paint.b)In tees, angles, flats and channels

Providing corrugated G.I. sheet roofing, fixed with galvanized iron j or 1 hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers filled with white lead complete excluding the cost of purlins rafter and trusses.a)0.63 mm thick sheet - 24 G

Providing and fixing 4 mm thick plywood plain lining with necessary screws, priming coat on unexposed surface etc. complete with b)Commercial ply facing of approved manufacture

Painting two or more coats (excluding priming coat) with superior quality ready mixed paint for steel work of approved brand & manufacture in all shades on new work to give an even shade.

Providing and fixing M.S. handles with weld etc. complete.

Providing and fixing M.S. tower bolts (barrel type) with necessary weld etc. complete a) 250 x 10 mm

Dismantling steelwork in built up sections in angles, tees, flats and channels including all gusset plates bolts, nuts, cutting dismembering and staking within 50 mts. Lead

Dismantling G.I. sheets roofing including ridges, hips valleys and gutters etc. and stacking the material within 50 meters lead.

Supply and fixing GI mesh weld mesh jhali of size 33*33*2.5 mm and fixing all side with self tapping screw

supply tarpoline sheet 1.2GSM and fixing it with PVC button and tierod /nylon rope

Providing and installing waterproofing pandals with GI sheet and decorative cloth underneath at suitable height on hire basis sqm/day

Providing and fixing angle fasteners

Properly Numbering the benches of each classroom on first and second floor and Shifting the benches/drawing tables/ table/ any other material from the classrooms of first and second floor of GPP to the open terrace on first floor by properly stacking the same and covering it with tarpoline sheet and placing it back to classroom after the counting or as instrcuted by the Engineer incharge (cost of tarpoline sheet to be paid seperately)

Providing and fixing M.S box/cylindrical hinges bright finish or and black enamelled with neccesary weld etc. complete as per engineer in charge

Providing and fixing M.S Aldrop with weld etc complete as per instruction of Engineer in Charge

Supplying standard size plastic chairs with/without arms on rental/hiring basis per day

Supplying PVC/plastic tables standard size of 1.2*0.9*.08 m on rental/hiring basis per day

Supplying three seater cushion sofa on rental/hiring basis per day

D K BHOMKAR