Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.1 LAccepted-AOC 184 187 TEMPLESTEPS BLOCK ANNASALAI LITTLEMOUNT CHENNAI CHENNAI TAMIL NADU 600015 | CHENNAI | TAMIL NADU | 600015 | L1 | Accepted-AOC AOC | |
| 2 | L2₹15.4 L+₹1.3 L (9.11%)Rejected-Finance SCHINDLER HOUSE MAIN STREET HIRANANDANI GARDENS POWAI MUMBAI 400076 MAHARASHTRA INDIA | MUMBAI | MUMBAI SUBURBAN | MAHARASHTRA | 400076 | L2 | Rejected-Finance STOOD L2 |
| Sl No | Description | Qty | Unit | Otis Elevator Company(India)Limited L1 | SCHINDLER INDIA PRIVATE LIMITED L2 |
|---|---|---|---|---|---|
| 1.00 | SITC of gearless/geared Automatic MRL Lift with ACVVVF Drive (as per manufacturer design and conforming to IS) and putting into operation after final testing in the existing lift shaft complete with all accessories and repairing damage wall/floor if any etc. complete as required incl. necessary civil works having following specification:-
[Lift Well Dimension 1900 mm x 2150 mm] (Make - OTIS/KONE/Schindler i.e. Category- I)
10 Passenger Lift (G+2), Speed 1.0 mtrs./sec.
(i) Capacity-680 Kg (10 Passenger).
(ii) Speed-1.00m/s.
(iii) No. of stops/openings : 3 stops/ 3 opening ( all openings on the same side).
(iv) Travel height(Rise) - 7.2 mtrs (approx), Ground Floor to 2nd floor i.e (G+2).
(v) Power Supply-415 V±5%, 3 Phase., 50 Hz.
(vi) Control system - Microprocessor based AC V3F Drive with Full collective Simplex control.
(vii) Machine- Permanent Magnet AC Synchronous Motor-Eco-Disc Gearless Drive.
(viii)Head room height -4200 mm.(Approx) | 1 | Nos | 11,85,000 ₹11,85,000 Lowest | 12,93,000 ₹12,93,000 |
| 1.01(ix) Pit Depth-Min of 1350 mm.(Approx) (x)Indicators (a).Full height Car operating panel with combined luminous micro stroke hall hattot with 7 segment digital hall position indicator at all landings with up & down arrow (b). Overload warning indicator in car and COP(7 Segment display). (xi) Car enclosure & Panel -Stainles steel in hair line finish with false ceiling with LED downlighter & fan arrgement with rear side hand rail(18SWG). (xii) Lift Well/Hoistway available:(1950mm Width X 2150 mm Depth approx.) (xiii) Car Dimensions(WxDxH) :1100 mm x 1600 mm & 2200 mm (approx.),(size should be fix by the OEM before the Installation & must be approved from EIC) (xiv) Car door - Stainless steel SS4 hairline finish two panel Telescopic auto power door (700 mm. X 2000 mm.) (xv) Landing doors Stainless steel SS4 hairline finish centre opening power door 800 mm W X 2000 mm H. | |||||
| 1.02 | (xvi) Clear door opening (800) mm X 2000 mm).
(xvii) Over Load Protection Audio & visual indication in car.The lift will not start when over load actuate and door keep open at that time and bypass the landing call when fully loaded.
(xviii)Door Operation: ACV3F operated automatic two panel Telescopic with Multi-Beam full height infrared detector auto power door protection system.
(xix) TRACTION MEDIA: Flat Coated Steel Belt with V groove/ Steel Rope,
(xx) Fire Rated Door for 60 mins.(Rate should be quoted after inspection and verification of actual & specific site).
(xxi) Emergency light & Emergency alarm - Battery operted emergency alarm and emergency light inside the car.
(xxii) Intercommunication System(3Way) -By pressing the emergency alarm buttom, intercom will start work and the attendent shall alarted in need. | - | - | - | - |
| 1.03 | (xxiii) Ventilation Cross Flow/standard size fan as per I.S specification. (quantity as per site requirement/OEM design)
(xxiv) Car lighting:With 2/4 nos. LED down lighter as required.
(xxv) False ceiling. Stainless steel hair line finish.
(xxvi) Car flooring Granite Matfinish.
(xxvii)Should provide Fireman Drive with switch- Fireman Switch to be provided at ground floor landing or at main lobby. (xxviii) HALL FIXTURES: As per manufacturer design
(xxix)HALL FIXTURE FACE PLATE:Stainless Steel 4(Hairline). or Touch sensitive Glass Panel or Seven segment Display.
(xxx) HALL BUTTON ARRANGEMENT: As per manufacturer design).
(xxxi) Auto rescue device(ARD) Battery oprated automatic rescue device for automatic evacution to the nearest floor in case of power failure.
xxxii)Auto power light & Fan OFF. | - | - | - | - |
| 1.04 | SAFETY FEATURES :
a) Over Speed Protection b) Single Phase Protection
c) Over load Protection d) Phase Failure Protection
e) Terminal Limit Switch f) Emergency Stop Switch
g) Interlocking Switch h) Reverse Phase Protection
i) Delocking arrangement from landing j) Thermal protection of motor | - | - | - | - |
| 1.05 | T&C :
i). The agency must procure the meterials from the OEM/ manufacturer or from their authorized sales channel, so that the standard warranty /support of the manufacturer/OEM becomes applicable to the products to be delivered and install by them.
ii). Documents that authenticates such procurement from the manufacturer/OEM or from their authorized sales channel and standard warranty/support should be sent to the e-mail of the EIC and hard copy of it to be submitted during execution of work/submission of bill.
iii). If any refurbished meterial is supplied or installed,penal action will be taken as per existing govt. rules. *Defect liablity period - 18 months from the date of handover. | - | - | - | - |
| 2.00 | Add GST @18% On total from item no 1 | 1 | Nos | 2,13,300 ₹2,13,300 Lowest | 2,32,740 ₹2,32,740 |
| 3.00 | Add LWC @1% On total from item no 1and 2 | 1 | Nos | 13,983 ₹13,983 Lowest | 15,257.4 ₹15,257.4 |
Tender Value
Refer Docs
EMD Value
₹35,000
Closing Date
1 Sept 2025, 6:55 pmClosed
EE.AED.PWD
Office of the Executive Engineer, PWD, Asansol Electrical Division Bijoy Pal Sarani, Opposite to Polo Ground,Asansol-713304, Paschim Bardhaman.
Construction of addl. new building (3 Storied) with the Provision of future extension one storey to meet the deficiencies of built up area of this institute to comply with the space norms of AICTE at HBITM,Raniganj..SITC of 10 Passenger MRL Lift.
2025_WBPWD_888673_1
WBPWD/EE/AED /eNIQ-13(2nd Call)/2025-26
Open Tender
ELECTRICAL WORKS ORG
Item Rate
120 days
ASANSOL
Please refer Tender documents.
4 documents required · 4 mandatory
₹35,000
Office of the Executive Engineer P.W.D. Alsanso
25 Aug 2026
7 Aug 2025
4 Sept 2025
7 Aug 2025
1 Sept 2025
13 Aug 2025
12 Aug 2025
Amount
SITC of gearless/geared Automatic MRL Lift with ACVVVF Drive (as per manufacturer design and conforming to IS) and putting into operation after final testing in the existing lift shaft complete with all accessories and repairing damage wall/floor if any etc. complete as required incl. necessary civil works having following specification:- [Lift Well Dimension 1900 mm x 2150 mm] (Make - OTIS/KONE/Schindler i.e. Category- I) 10 Passenger Lift (G+2), Speed 1.0 mtrs./sec. (i) Capacity-680 Kg (10 Passenger). (ii) Speed-1.00m/s. (iii) No. of stops/openings : 3 stops/ 3 opening ( all openings on the same side). (iv) Travel height(Rise) - 7.2 mtrs (approx), Ground Floor to 2nd floor i.e (G+2). (v) Power Supply-415 V±5%, 3 Phase., 50 Hz. (vi) Control system - Microprocessor based AC V3F Drive with Full collective Simplex control. (vii) Machine- Permanent Magnet AC Synchronous Motor-Eco-Disc Gearless Drive. (viii)Head room height -4200 mm.(Approx)
(ix) Pit Depth-Min of 1350 mm.(Approx) (x)Indicators (a).Full height Car operating panel with combined luminous micro stroke hall hattot with 7 segment digital hall position indicator at all landings with up & down arrow (b). Overload warning indicator in car and COP(7 Segment display). (xi) Car enclosure & Panel -Stainles steel in hair line finish with false ceiling with LED downlighter & fan arrgement with rear side hand rail(18SWG). (xii) Lift Well/Hoistway available:(1950mm Width X 2150 mm Depth approx.) (xiii) Car Dimensions(WxDxH) :1100 mm x 1600 mm & 2200 mm (approx.),(size should be fix by the OEM before the Installation & must be approved from EIC) (xiv) Car door - Stainless steel SS4 hairline finish two panel Telescopic auto power door (700 mm. X 2000 mm.) (xv) Landing doors Stainless steel SS4 hairline finish centre opening power door 800 mm W X 2000 mm H.
(xvi) Clear door opening (800) mm X 2000 mm). (xvii) Over Load Protection Audio & visual indication in car.The lift will not start when over load actuate and door keep open at that time and bypass the landing call when fully loaded. (xviii)Door Operation: ACV3F operated automatic two panel Telescopic with Multi-Beam full height infrared detector auto power door protection system. (xix) TRACTION MEDIA: Flat Coated Steel Belt with V groove/ Steel Rope, (xx) Fire Rated Door for 60 mins.(Rate should be quoted after inspection and verification of actual & specific site). (xxi) Emergency light & Emergency alarm - Battery operted emergency alarm and emergency light inside the car. (xxii) Intercommunication System(3Way) -By pressing the emergency alarm buttom, intercom will start work and the attendent shall alarted in need.
(xxiii) Ventilation Cross Flow/standard size fan as per I.S specification. (quantity as per site requirement/OEM design) (xxiv) Car lighting:With 2/4 nos. LED down lighter as required. (xxv) False ceiling. Stainless steel hair line finish. (xxvi) Car flooring Granite Matfinish. (xxvii)Should provide Fireman Drive with switch- Fireman Switch to be provided at ground floor landing or at main lobby. (xxviii) HALL FIXTURES: As per manufacturer design (xxix)HALL FIXTURE FACE PLATE:Stainless Steel 4(Hairline). or Touch sensitive Glass Panel or Seven segment Display. (xxx) HALL BUTTON ARRANGEMENT: As per manufacturer design). (xxxi) Auto rescue device(ARD) Battery oprated automatic rescue device for automatic evacution to the nearest floor in case of power failure. xxxii)Auto power light & Fan OFF.
SAFETY FEATURES : a) Over Speed Protection b) Single Phase Protection c) Over load Protection d) Phase Failure Protection e) Terminal Limit Switch f) Emergency Stop Switch g) Interlocking Switch h) Reverse Phase Protection i) Delocking arrangement from landing j) Thermal protection of motor
T&C : i). The agency must procure the meterials from the OEM/ manufacturer or from their authorized sales channel, so that the standard warranty /support of the manufacturer/OEM becomes applicable to the products to be delivered and install by them. ii). Documents that authenticates such procurement from the manufacturer/OEM or from their authorized sales channel and standard warranty/support should be sent to the e-mail of the EIC and hard copy of it to be submitted during execution of work/submission of bill. iii). If any refurbished meterial is supplied or installed,penal action will be taken as per existing govt. rules. *Defect liablity period - 18 months from the date of handover.
Add GST @18% On total from item no 1
Add LWC @1% On total from item no 1and 2
SCHINDLER INDIA PRIVATE LIMITED (BID ID -6839583)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .