(Moulik Nidhi) Maintenance of Community Hall at Prajapati Mohalla Zone No. 07 ward No. 33 file No. 10/26x3/3

13.38 Distempering with 1st quality acrylic distemper (ready mixed) ofapproved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work.

15.2 Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in-charge. 15.2.1 1:3:6 or richer mix

2.6 Earth work in excavation for foundation, trenches fo rpipes / cables or drains etc. by mechanical means / manual means (exceeding 30cm in depth.) including ramming of bottom, dressing of sides, disposal of excavated earth including of all lift and lead upto 50m. Disposed earth to be levelled and neatly dressed. 2.6.1 All kinds of soil

4.1 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work up to plinth level 4.1.7 Cement concrete grade M-7.5 (Nominal Mix) with 40 mm maximum size of stone aggregate

19.1 Centering and shuttering including strutting, propping stretching etc. complete for and removal of form work by sheet plate or ply wood shuttering for : 19.1.1 Foundations, footings, bases of columns, etc. For mass concrete.

5.11 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding upto floor level including cost of binding wire, wastage and over laps upto 12mm horizontal/ inclined position of reinforcement bars in slab and beams, plinth, chajjas, lintels, upto 4.5m vertical length of reinforcement in wall columns (over laps shall be provided as per requirement of IS : 13920; IS 456 & SP : 34) etc. complete.5.11.4 Thermo-Mechanically Treated bars. (Fe 500 D or more)

13.1 12 mm cement plaster of mix :13.1.2 1:6 (1 cement: 6 sand)

13.2 15 mm cement plaster on rough side of single or half brick wall of mix 13.2.2 1:6 (1 cement: 6 sand)

21.25 Providing and placing on terrace at all floor polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

7.7 Coursed rubble masonry (second sort) with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)

10.2 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete:

10.14.1 Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 10.14.1.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

4.1 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work up to plinth level.4.1.2 Cement concrete grade M-20 (Nominal Mix) with 20 mm maximum size of stone aggregate

6.3 Brick work with chimeny brick of class designation 40 in superstructure above plinth level upto floor 2 level including the cost of scaffolding in : 6.3.1 Cement mortar 1:4(1 cement : 4 coarse sand)

23.18 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm or 340x410 x265mm sizes respectively.

10.4 Providing and fixing 1mm thick M.S. sheet sliding-shutters with frame and diagonal braces of 40x40x6mm angle iron, 3mm M.S. gusset plates at the junction and corners 25mm dia pulley, 40x40x6mm angle and T-iron guide at the top and bottom respectively including applying a priming coat of approved steel primer.

11.3 Cement concrete flooring M-15 (nominal mix) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 11.3.1 40mm thick with 20mm maximum size of stone aggregate.

23.1 Providing and fixing white vitreous china water closet squatting pan (Indian type) P or S trap, complete including cutting and making good the walls and floors wherever required : 23.1.1 Long pattern W.C. pan of size 580 mm

23.10 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern including painting of fittings and brackets, cutting and making good the walls wherever require : 23.10.1 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps.

11.33 Providing and laying rectified Glazed Ceramic floor tiles 300x300 mm or more (8mm to 10mm thick) of 1st quality conforming to IS : 15622 of approved make in and colours laid on 20mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including grouting the joints with white cement and matching pigments etc., complete.

13.23 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete

11.34 Providing and laying rectified Glazed Ceramic wall tiles 300x450 mm or more (8mm to 10mm thick) of 1st quality conforming to IS : 15622 of approved make in all colours, laid on 12 mm thick Cement Mortar 1:3 (1 Cement : 3 Coarse sand) including grauting the joints with white cement and matching pigments etc., complete.

11.35 Providing and laying vitrified floor tiles (without Soluble salt) or printed (with soluble salt) Nano polished (Glossy finish) in different sizes with water absorption less than 0.05% and conforming to IS : 15622 of approved make in all colours & shades, Ist quality/ premium quality in flooring laid on 20mm thick cement mortar 1:4 (1 cement : 4 sand) including grouting the joints with white cement and matching pigments etc. complete. Size 600x600mm as per manufacturer specification.

5.1 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 5.1.1 Cement concrete grade M-20 (Nominal Mix) with 20 mm maximum size of stone aggregate.

21.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plane and brass threaded fitting i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 21.1.1 15 mm nominal outer dia .Pipes

21.1.2 20 mm nominal outer dia .Pipes.

21.1.4 32 mm nominal outer dia .Pipes.

21.12 Providing and fixing brass bib cock of approved quality : 21.12.1 15 mm nominal bore 0.40kg

13.46.3 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand or manufacture

Lettering with black Japan paint of approved brand and manufacture

13.39 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on new work

10.1 Providing and Laying and Jointing salt glazed stone ware (S.W.) pipes socket and spigot ISI marked as per IS 651-2007 SP1 class with stiff cement mortar 1:1 including testing of joints etc. complete 10.1.3 200 mm

17.23 Providing & fixing of precast reinforced cement concrete manhole cover and frame including cost of transporting at site and all material etc. complete 17.23.8 450 x 900 mm heavy duty

17.23.18 560 mm dia. Extra heavy duty

5.5 Providing and laying in position following PVC bends suitable for 6, 8 and 10 Kg/Sq. cm. pressure pipes. 6Kg/Cm2 5.5.2 110 mm dia.

11.5 62 mm thick cement concrete flooring with concrete hardener topping under layer 50 mm thick cement concrete grade M-15 (Nominal Mix with 20mm maximum size of stone aggregate) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6mm nominal size) by volume. Hardening compound is mixed @ 2 litre per 50kg of cement or as per manufactures specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.

11.25 Kota stone 25mm thick flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of 1:4 cement mortar (1 cement : 4 course sand) (minimum size of kota stone 2.0 sqft)

Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine ith strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50 mm thick compacted bed of stone dust sand, filling the joints with coarse sand etc. all complete as per the direction of Engineer-in-charge.

12.3 Providing and Laying non-pressure (NP3) RCC socket & spigot pipes with rubber gasket joint including testing of joints. 12.3.3 250 mm dia

10.26 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc. including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete i/c fixing the railing with necessary accessories and stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge. ( fo payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)

11.15 Precast terrazo tiles 18-20mm thick with graded marble chips of size upto 12mm laid in floors, and landings, jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete with precast tiles on 20mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) 11.15.1 Light shade using white cement.

12.1 Providing & fixing corrugated Galvanised steel (CGS) sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in orizontal/vertical or curved surfaces) excluding the cost of purlins, afters and trusses and including cutting to size and shape wherever required. 12.1.1 1.00mm thick with zinc coating not less than 275gm/m²

1.1Point Wiring in surface rigid P.V.C. conduit system with Flush type Accessories Point wiring including metallic switch box, sheet, switches, sockets,lamp holders/ ceilingrosesetcwith1.5Sq.mm.PVCinsulatedcableFRwith coppermultistrandconductorISImarkedinSurfacerigidP.V.C.conduit(MMS)ISIMarkedofsuitablesizeand1.5Sq.mm.PVCinsulatedcopperearthcontinuityconductorofgreencolourinsideconduitincludingpainting etc. as required as per specification for :- 1.1.1Light Point/Fan Points. a) Short point

b) Medium point

c) Long point

9.23 Supplying, Fixing and Testing of Compact Floures cent Lamp (CFL) with inbuiltelectronicballastISImarkedofapprovedmakeasrequiredasperspecification 5 Watt

17.6 Providing and fixing powder coated aluminium work (minimum thickness of powder coating 50 micron) consisting of tee/ angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P. brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I. level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-charge (level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately).

17.3 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM Rubber neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in- charge (Cost of aluminium snap beading shall be paid in basic item): 17.3.2 With float glass panes of 5.50 mm thickness

Please Enable Macros to View BoQ information