8376/E8

Amount

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, in roof covering including ridges and keeping serviceable sheets in safe custody for reuse in the work complete as directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water upto any height of building including necessary scaffolding and safety measure complete all as specified and directed

Dismantling of 100mm dia cast iron pipe jointed in cement morter in foul places including bend and branch pieces all as directed by Engr-in-Charge.

Supply only Liquid water proofing compound (ISI marked) complete all as specified and directed.

Material and Labour Brick work with fly ash bricks of designation 7.5, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed

Material and Labour Brick work with fly ash bricks of designation 7.5, straight or curved on plan to any radius as in half brick thick wall built in cement mortar 1:4 complete all as specified and directed

All as per item No.7 here in before but except bricks ( old serviceable bricks obtained from demolition shall be reused).

Material and labour Chipping of unsound/weak concrete materials upto 50mm thick from cloumn/ beam/slabs/chajja with standard power driven percussion type or pneumatic chiesel of standard make including tapering all edges, making square shoulders of cavities etc upto any height of building including necessary scaffolding and safety measure complete all as specified and as directed by the Engr-in-Charge.

Material and labour Removing concrete all around reinforcement including behind of bars to give an average clearance of 25mm (but not less than 15mm clear air gap) by manual methods (hammering and using wire brushes, chieselling etc.) length of reinforcement bars cleared of concrete shall be measured for payment including upto any height of building with necessary scaffolding and safety measure complete all as specified and as directed by the Engr-in-Charge.

Material and labour Cleaning of exposed concrete surfaces of lightly sticking materials including foreign materials, loose concrete/ aggregate etc and disposal of all debris upto distance of 50 m and applying single coat of epoxy bond adhesive on prepared non metallic surfaces (existing surface) by using brush as per manufacturers instruction / specification upto any height of building with necessary scaffolding and safety measure complete all as specified and as directed by the Engr-in-Charge. Make : Fosroc/Elantas beck/Kunal Conchem/ Hindcon Chemical Limited

Material and labour Exposing the corroded reinforcement upto and including 16mm dia of bar completely along its full circumference, cleaned to remove all loose scale and corrosion deposit, applying rust removing chemical followed by removing the rust by emery paper and cleaning the area thoroughly by water and allow it to dry as per manufacture's instruction upto any height of building with necessary scaffolding and safety measure complete all as specified and as directed by the Engr-in-Charge. Make : Fosroc/Elantas beck/Kunal Conchem/ Hindcon Chemical Limited

Supply and application Epoxy Zinc rich primer on the prepared reinforced surface by brush, the primer shall have a minimum specific gravity 1.75, minimum wet film thickness/coat 100 microns & dry film thickness/coat 40 microns. Minimum adhesive bond strength with steel is 1.5 N/mm2 upto any height of building with necessary scaffolding and safety measure complete all as specified and as directed by the Engr-in-Charge. Make : Fosroc/Elantas beck/Kunal conchem/ Hindcon Chemical Limited

Supply and Application Free flow non-shrink cementitious micro concrete to the affected beam, column etc. above 45 mm but upto 60mm thickness (average) where major spalling has taken place even the core of concrete affected. The Micro concrete shall have a minimum 1 day compressive strength of 10 MPa and 28 days strength of 50 MPa, Minimum tensile strength 2 N/mm2 @ 28 days, minimum Flexural strength 5 N/mm2@ 28 days tested as per BS 4551-80, Expansion characteristics Unrestrained expansion as per ASTM C827-1987 1 to 4%. upto any height of building with necessary scaffolding and safety measure complete all as specified and as directed by the Engr-in-Charge. Make : Fosroc/Elantas beck/Kunal conchem/Hindcon Chemical Limited

Supply and Application Two component structural grade polymer modified reinstatement mortar where local spalling has taken place or shuttering is not possible. The Mortar can be applied from a minimum of 5mm to 15mm thickness in smaller vertical pockets and upto 100 mm thickness in horizontal applications. The Mortar should have a minimum compressive strength 12 N/mm² in 1 day and 45N/mm² in 28 days. Minimum Flexural strength should be 8 N/mm² in 28 days. A modified styrene butadience emulsion for use as a bonding aid and gauging liquid for cementitous systems to be mixed with cement slurry before the application of microconcrete to be used @ 6 lit/bag of cement. The bonding agent should have minimum compressive strength 24 N/mm² Minimum Tensile strength 3.5 N/mm², Minimum Flexural Strength 6.5 N/mm² complete all as specified and as directed by the Engr-in-Charge. Make : Fosroc/Elantas beck/Kunal conchem/Hindcon Chemical Limited

Material and labour Applying Concure LP 90 or equivalent over concrete and cement plaster as curing compound as per manufactures instructions complete all as specified and as directed by the Engr-in-Charge. Make: Fosroc/De-Rust chemical Corporation of India/CICO/Sika/Dr Fixit/ Hindcon Chemical Limited

Materials and labour Introducing new reinforcement bars for structural connections in RCC beam, lintels, columns and slabs etc including power drilling holes of appropriate diameters in reinforced or plain cement concrete to a minimum depth of 150mm upto 200mm including power drilling, fixing the reinforcement in position using epoxy after dusting of loose dust by blowing air, sealing the same with epoxy cartridges etc as per manufacturer instruction for upto 12mm dia of bar including necessary scaffolding and safety measure complete all as specified and as directed by the Engr-in-Charge. Make: Fosroc/De-Rust chemical Corporation of India/CICO/Sika/Dr Fixit / Hindcon chemical Limited.

Materials and labour Water proofing materials ( BRUSH BOND ROOF GUARD) on the concrete / plastered surfaces by applying three coats @ 1.5 Litres/ Sqm for three coats at 1.00 mm thickness of each coat by using brush or roller complete all as directed by Engineer-in-Charge. Note:- Drying time between the coats shall be maintained as per manufacturer's instructions and the above application shall be carried out through authorized application of manufacturer. Make:- Fosroc / Siks/ Dr Fixit/ Hindcon Chemical Limited

Supply and fix Pre-Painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Refining old serviceable CGI/PGI sheets with new fittings complete all as specified and directed.

Material and Labour for Mild steel framed work such as grills, gratings, gates etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bar, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-410-0 Gde E-250 complete all as specified and directed.

Stripping of old tarfelt including layer of plaster or morter of any type of treatment carefully from roof surfaces (without damage of roof) and roughening of surface of old concrete roofing by picking, sweeping, cleaning and washing down with water to removing dust/debris complete all as specified and directed by Engr-in-Charge.

Material and Labour Water proofing treatment on RCC roof etc. comprising with the following operation and as specified here in below complete all as specified and as directed:- (a) Brushing neat cement slurry with 3.00 kg of cement per Sqm. (b) 20 mm thick screed bed in cement mortar 1:4 as in roof padding. (c) Applying one coat of cold bituminous primer to the plastered surface @ 0.40 liters per Sqm conforming IS-3384. (d) A layer of APP based polymeric membrane membrane 3mm thick (minimum) weighing 3.6 Kg per Sqm reinforced with polyster non woven fabric (weighing not less than 160 gms/Sqm ) shall be applied over bituminous primer as specified above. Application of polymeric membrane shall be by torch application. The over lap shall be minimum 100 mm on transverse direction and 75 mm in longitudinal direction. (d) One coat of bituminious aluminium paint over the APP based membrane @ 0.11 Ltr/Sqm.

Material and Labour Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 Cm girth complete all as specified and directed.

Material and Labour Rendering 15 mm thick on fair faces of brick work or concrete wall surfaces in cement mortar 1:6 and finished the surfaces even and smooth without using extra cement upto any height of building including necessary scaffolding and safety measure complete all as specified and directed.

Material and Labour Rendering 10 mm thick on fair faces of concrete surfaces of ceiling etc in cement mortar 1:4 and finished the surfaces even and smooth without using extra cement upto any height of building including necessary scaffolding and safety measure complete all as specified and directed.

Material and labour Rendering 20mm thick in cement mortar 1:4 on fair faces of brick work or concrete surface in two layers each 10mm thick mixed with integral water proofing compound as per manufacturer instruction (WPC shall be mixed with top layer only) fair finished without using extra cement complete upto any height of building including necessary scaffolding and safety measure complete all as specified and directed. Note:- Water proofing compound shall be measured and paid separately as "Supply only".

Material and Labour Acrylic distemper any colour / tint, two coats over a coat of primer and 2mm thick wall care putty ( Birla/ Asian/ berger) over newly plastered internal wall surfaces including necessary preparation of surfaces complete upto any height of building including necessary scaffolding and safety measure complete all as specified and directed.

Material and Labour Acrylic distemper any colour / tint, one coat over old plastered internal wall surfaces including necessary preparation of surfaces complete upto any height of building including necessary scaffolding and safety measure complete all as specified and directed.

Material and Labour White wash, three coats on newly plastered ceiling surfaces including necessary preparation of surfaces complete upto any height of building including necessary scaffolding and safety measure complete all as specified and directed.

Material and Labour Cement based paint of any colour / tint, two coats over a coat of primer over newly plastered external wall surfaces including necessary preparation of surfaces complete upto any height of building including necessary scaffolding and safety measure complete all as specified and directed.

Material and Labour Preparation of new steel surfaces of any description, exc 10 Cm width or girth and applying two coats of synthetic enamel paint of any colour / tint over a coat of red oxide primer complete all as specified and directed.

Material and labour for repairs of bath room out let pipe, rain water pipe mouth with the help of chemical component conbextar GP2 including PCC 1:2:4 Type B1 (20mm graded crushed stone aggregates) as per manufacturer instructions complete all as specified and directed by Engr-in-Charge. Make: Fosroc/De-Rust chemical Corporation of India/CICO/Sika/Dr Fixit or equivalent as approved.

Disconnecting existing water tank of capacity exc 250 litres & n.exc 500 litres, reconnecting and refixing in position including cleaning and removing all scale and dirt and algae formation, etc from tank and from mouth of circulating pipes by using TERBAC G5 , etc including writing letters/figures boldly & solidly “TANK CLEANED ON ________ (Date of Cleaning )” with two coats of synthetic enamel paint (1st grade quality) of height of letter 5 Cm & width 2.5 Cm with oblitering the old one complete all as specified and as directed by the Engr-in-Charge.

All as per item 35.00 here-in-before but capacity of tank exc 500 litres and n.exc 1000 litres

All as per item 35.00 here-in-before but capacity of tank exc 1000 litres and n.exc 2000 litres. Notes for Item Nos 35 to 37:- Works shall be carried out through authorized company of TERBAB G5 and Certifacte shall be produced.

Supply and fix PVC tank cover for water tank of capacity 1000 Litres with proper locking arrangement including taking down old unserviceable one complete all as specified and as directed. Make:- Prayag / Parryware/ Commander/ Hindware/ Cera.

Supply and fix Cast iron (spun pipe) soil, waste and vent pipes 100mm bore in any length with or without ears, with cement joints,fixed to walls complete all as specified and as directed.

Refixing Cast iron (spun pipe) soil, waste and vent pipes 100mm bore in any length with or without ears, with cement joints,fixed to walls complete all as specified and as directed. Note:- Old serviceable pipe obtained from dismantling of pipe shall be reused.

Supply and fix Cast iron Floor trap for 100mm dia of outlet , with grating including jointing to waste pipe fixed in cement concrete type B-1(1:2:4, 20mm graded crushed stone aggregates)) including taking down old unserviceable one complete all as specified and as directed.

Supply and fix Cast iron nahani trap for 100mm dia of outlet , with grating including jointing to waste pipe fixed in cement concrete type B-1(1:2:4, 20mm graded crushed stone aggregates)) including taking down old unserviceable one complete all as specified and as directed.

Supply and fix Cast iron bends (any radius) diminishing pieces or tapers in foul places with oval access door including necessary scaffolding upto any height. complete all as specified and as directed.

Supply and fix Cast iron Tee, branch pieces ( any radius) diminishing pieces or tapers in foul places with oval access door including necessary scaffolding upto any height. complete all as specified and as directed.

Supply and fix 100mm cast iron sanitary connections—short connections pipe of length upto 300 mm arrangement including taking down old unserviceable one complete all as specified and as directed.

Supply and fix in repairs Vitreous china wash down water closet ( padestal pattern) white, with 'S' or 'P' trap ( excluding flushing cistern and flush pipe) including new PVC seat cover and making good disturbed surfaces with concrete as per existing one complete all as specified and directed by the Engr-in-Charge. Make : Parryware Cat part No.C0287 equivalent of approved make in Cera/ Hindware.

Supply and fix in repair valveless syphonic action type PVC 10 litres capacity low or high level flushing cistern white/coloured with inlet ball valve, float handle incl fixing bracket & 32 mm bore including flush pipe etc all as specified & directed. Make : Cera CONGO Cat Part No.B1010109 or equivalent model from make as specified in particular specifications.

Uprooting of tree from walls of bldgs up to extranded root and spraying of acid of required quantity complete from any location of Bldg up to 4 storied and making good disturbed surfaces with cement mortar (1:4) or cement concrete type C1(1:3:6) using 20mm graded aggregate including necessary scafolding complete for tree of girth up to 5 to 10 Cm complete all as directed by Engineer-in-charge.

BHASKAR SUPPLY AGENCY

Tirupati Buildcon Pvt. Ltd.

A S ENTERPRISE

SREE GURU CONSTRUCTION CO

THE PLANTERS ENGINEERING CORPORATION

PEARL CORPORATION

JAY MA TARA TRADERS