CONSTRUCTION OF AGGREGATE STORAGE HANGAR INSIDE SUKHOI ENGINE DIVISION, KORAPUT.

LIST OF WORK IN PROGRESS FOR THE WORK CONSTRUCTION OF AGGREGATE STORAGE HANGAR INSIDE SUKHOI ENGINE DIVISION, KORAPUT.

Line No. KPTCC/W/417

NAME OF THE CONTRACTOR

Sl. No. Name of Work Total/W.O Value in Rs. Executed/Completed Value Rs. Balance Rs. Date of Commencement Date of Completion

HINDUSTAN AERONAUTICS LIMITED KORAPUT DIVISION CENTRAL CONTRACT CELL

Name of the Work CONSTRUCTION OF AGGREGATE STORAGE HANGAR INSIDE SUKHOI ENGINE DIVISION, KORAPUT.

Line No KPTCC/W/417

Name of the Contractor

Check list and acceptance for submission of documents with tender

Sl No. Documents Checking by Contractor

1 Constitution and Legal Status of Bidder Firm Registration, Power of attorney of signatory of Bid

2 Submission of cost of Tender documents by way of DD/BC drawn in favour of HAL, Engine Division, Koraput, payable at SBI, Sunabeda (Scanned image of the same in jpg format only to be uploaded) Value

3 Submission of EMD Amount by way of DD/BC drawn in favour of HAL, Engine Division, Koraput, payable at SBI, Sunabeda (Scanned image of the same in jpg format only to be uploaded) Value

4 Submission of Banker’s Solvency certificate for an amount as mentioned in tender issued by any nationalized bank issued within a period of 12 months from the final date of submission of tender Value

5 Submission of Work order copies for having executed similar works in Govt./ Railways/PSUs/Reputed firms

6 Submission of Performance / Completion certificates from Govt./Railways/PSUs/Reputed Private Firms (supported with TDS certificate if from Reputed Private firms) in the last 7 years. For one works value

For Two works value

For Three works value

7 Submission of Contractor’s Registration Certificate with Govt./Quasi Govt./PSUs /Reputed Company

8 Submission of Income Tax Return for last 3 financial years. 2021-22

9 Submission of Average Annual financial turnover during the last 5 years 2019-20

10 Balance sheet for the last 5 years

11 Plant and Machinery details of work

12 Proposed work completion Schedule in the form of Bar Chart

13 Work in Hand in the required format

14 Bank Balance Statement for the last three months

15 Overdraft facilities available with the agencies

16 Submission of Copy of PF Registration PF No.

17 Submission of Copy of Labour License

18 Submission of Copy of PAN Card PAN No.

19 Acceptance of “General Condition of Contract and Instruction to tenderers” and “Notice Inviting Tender” along

20 NEFT/RTGS Format Duly filled in (Original to be submitted in the office)

21 GST REGISTRATION NO: GST No.

22 Submission of Copy of ESI Registration ESI No.

HINDUSTAN AERONAUTICS LIMITED

KORAPUT DIVISION

CENTRAL CONTRACT CELL

BILL OF QUANTITIES FOR THE WORK OF "CONSTRUCTION OF AGGREGATE STORAGE HANGAR INSIDE SED, KORAPUT"

LINE NO : KPTCC/W/417

NAME OF THE AGENCY :

Sl. No. Description of work Quantity Unit Rate Amount

1 Earth work in excavation for all kind of soil by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. etc. all complete as per specification and direction of Engineer In Charge. 1439.45 Cum ₹ 218.74 ₹ 314,865.29

2 Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing etc. all complete as per direction and specification of Engineer In Charge. 231.45 Cum ₹ 1,784.66 ₹ 413,059.56

3 Providing and laying in position cement concrete of 1:3:6 (1 Cement : 3 coarse sand derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) excluding the cost of centering and shuttering all works upto plinth level etc. all complete as per direction of Engineer in charge. 156.53 Cum ₹ 6,130.00 ₹ 959,528.90

4 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. In layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift etc. all complete as per specification and direction of Engineer In Charge. 581.94 Cum ₹ 164.71 ₹ 95,851.34

5 Carriage/removing of excavated Earth not exceeding 2.00 k.m. by mechanical transport including loading, unloading and stacking where directed etc. all complete as per specification and direction of Engineer In Charge. 857.51 Cum ₹ 206.57 ₹ 177,135.84

6 Providing and laying in position reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level etc. all complete as per specification and direction of Engineer In Charge. 347.18 Cum ₹ 7,600.84 ₹ 2,638,859.63

7 Providing and laying in position reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, roof beams, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) etc. all complete as per direction of Engineer in Charge. 183.11 Cum ₹ 9,668.49 ₹ 1,770,397.20

8 Providing and laying in position Reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement etc. all complete as per direction of Engineer in Charge. 48.36 Cum ₹ 9,120.13 ₹ 441,049.49

9 Supplying carrying to site all approved materials and placing in all positions steel reinforcement Thermo-Mechanically Treated bars of grade Fe-500D or more for R.C.C. work including straightening, cutting,bending, placing in position and binding up to and above plinth level etc. all complete as per specification and direction of Engineer In Charge. 75224.50 Kg ₹ 90.63 ₹ 6,817,596.44

10 Centering and shuttering including strutting, propping etc. and removal of form for the same for foundations, footings, bases of columns, etc. for mass concrete etc. all complete as per direction of Engineer in charge. 379.92 Sqm ₹ 329.54 ₹ 125,198.84

11 Centering and shuttering including strutting, propping etc. and removal of form for the same for columns, Pillars, Piers, Abutments, Posts and Struts etc. all complete as per direction of Engineer in charge. 363.77 Sqm ₹ 807.82 ₹ 293,860.68

12 Centering and shuttering including strutting, propping etc. and removal of form for the same for Lintels, beams, plinth beams, girders, bressumers and cantilevers etc. all complete as per direction of Engineer in charge. 1049.92 Sqm ₹ 618.82 ₹ 649,711.49

13 Centering and shuttering including strutting, propping etc. and removal of form for the same for suspended floors, roofs, landings, balconies and access platform etc. all complete as per direction of Engineer in charge. 582.09 Sqm ₹ 779.20 ₹ 453,564.53

14 Centering and shuttering including strutting, propping etc. and removal of form for the same for stairs, (excluding landings) except spiral-staircases etc. all complete as per direction of Engineer in charge. 5.85 Sqm ₹ 642.82 ₹ 3,760.50

15 Brick work with flyash F.P.S. (non modular) brick of class designation 5 in Cement mortar 1:4 (1 cement : 4 coarse sand) superstructure above plinth level up to floor five level etc. all complete as per specification and direction of Engineer In Charge. 174.50 Cum ₹ 5,228.82 ₹ 912,429.09

16 Plastering with 15 mm cement plaster on the rough side of single or half brick wall or any other surface in all height of mix in cement mortar 1:4 (1 cement: 4 fine sand etc. all complete as per specification and direction of Engineer In Charge. 2732.90 Sqm ₹ 335.67 ₹ 917,352.54

17 Finishing walls with Premium Acrylic Smooth exterior paint (Weather coat hving 100% acrylic emulsion) with Silicone additives of required shade over new work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) with preparation of surfaace etc. all complete as per specification and direction of Engineer In Charge. 829.61 Sqm ₹ 143.78 ₹ 119,281.33

18 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre over new work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour etc. all complete as per specification and direction of Engineer In Charge. 1903.29 Sqm ₹ 156.01 ₹ 296,932.27

19 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of 1.25mm thickness for rolling shutters with 80x1.25 mm M.S. laths including providing mechanical device chain and crank operation for operating rolling shutters exceeding 10.00 Sqm and upto 16.80 sqm in area .etc. all complete as per specification and direction of Engineer In Charge. 14.00 Sqm ₹ 4,146.68 ₹ 58,053.52

20 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer using M.S. angels 40x40x6 mm for diagonal braces etc. all complete as per specification and direction of Engineer In Charge. 6.00 Sqm ₹ 4,877.61 ₹ 29,265.66

21 Providing and fixing for fixed portion Powder coated (minimum thickness of powder coating 50 micron) aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws (Glazing, paneling and dash fasteners to be paid for separately) for fixed portion etc. all complete as per direction and specification of Engineer In Charge. 330.125 Kg ₹ 446.13 ₹ 147,278.67

22 Providing and fixing Powder coated (minimum thickness of powder coating 50 micron) aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws (Glazing, paneling and dash fasteners to be paid for separately) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) etc. all complete as per direction and specification of Engineer In Charge. 17.54 Sqm ₹ 533.15 ₹ 9,351.45

23 Providing and fixing 12 mm thick prelaminated particle board with decorative lamination on both sides flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per specification and directions of Engineer-in-Charge. 8.88 Sqm ₹ 937.31 ₹ 8,323.31

24 Providing and fixing with float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. etc. complete as per specification and directions of Engineer-in-Charge. 27.90 Sqm ₹ 1,264.92 ₹ 35,291.27

25 Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality upto 5 mm depth and 5 mm width etc. complete as per the direction of Engineer in-charge. 60.90 Rmt ₹ 81.30 ₹ 4,951.17

26 Providing and fixing 125mm aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. all complete as per specification and direction of Engineer In Charge. 12 Each ₹ 55.67 ₹ 668.04

27 Providing and fixing 300x10mm aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. all complete as per specification and direction of Engineer In Charge. 6 Each ₹ 109.33 ₹ 655.98

28 Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. all complete as per specification and direction of Engineer In Charge. 6 Each ₹ 826.18 ₹ 4,957.08

29 Providing and fixing aluminium hanging Single rubber floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. all complete as per specification and direction of Engineer In Charge. 6 Each ₹ 33.28 ₹ 199.68

30 Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of handles of approved quality for aluminium door, with necessary screws etc. all complete as per specification and direction of Engineer In Charge. 4 Each ₹ 714.33 ₹ 2,857.32

31 Providing and fixing 300x16mm aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. all complete as per specification and direction of Engineer In Charge. 4 Each ₹ 254.83 ₹ 1,019.32

32 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer etc. all complete as per specification and direction of Engineer In Charge. 76309.36 Kg ₹ 112.35 ₹ 8,573,356.60

33 Providing and fixing mild steel round holding down bolts with nuts and washer plates etc. all complete as per specification and direction of Engineer In Charge. 216.00 Kg ₹ 81.68 ₹ 17,642.88

34 Providing and fixing bolts including nuts and washers etc. all complete as per specification and direction of Engineer In Charge. 90.72 Kg ₹ 133.91 ₹ 12,148.32

35 Supplying and fixing at site welded steel wire fabric of required width having rectangular mesh painted with two or more coats of enamel paint of approved shade over a coat of primer (Priming & Painting to be paid for separately) etc. all complete as per specification and direction of Engineer In Charge. 1441.50 Kg ₹ 66.34 ₹ 95,629.11

36 Hire and running charge for crane up to 40 tonne capacity etc. all complete as per specification and direction of Engineer In Charge. 15.00 Day ₹ 7,521.01 ₹ 112,815.15

37 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required etc. all complete as per specification and direction of Engineer In Charge. 1353.80 Sqm ₹ 620.71 ₹ 840,317.20

38 Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated ‘J’ or ‘L’ hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as 2 mm thick corrugated (2.5” or 4.2” or 6”) or step-down (2” or 3” or 6” ) as specified etc. all complete as per direction of Engineer in charge. 177.20 Sqm ₹ 1,177.61 ₹ 208,672.49

39 Providing fixing thermal insulation of ceiling (under deck insulation) with Resin Bonded Fibre glass wool conforming to IS : 8183, density 24kg / m3, 50mm thick, wrapped in 200 G Virgin Polythene bags, fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5 mm x 24 gauge wire mesh, for top most ceiling of building etc. all complete as per direction of Engineer in charge. 946.00 Sqm ₹ 590.80 ₹ 558,896.80

40 Providing and fixing precoated galvanised steel sheet roofing ridges plain (500-600mm) of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws etc. all complete as per specification and direction of Engineer In Charge. 43.00 Rmt ₹ 447.35 ₹ 19,236.05

41 Providing and fixing precoated galvanised steel sheet roofing north light curves of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws etc. all complete as per specification and direction of Engineer In Charge. 172.00 Rmt ₹ 458.91 ₹ 78,932.52

42 Providing and fixing precoated galvanised steel sheet roofing barge board (upto 300mm) of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws etc. all complete as per specification and direction of Engineer In Charge. 68.00 Rmt ₹ 379.41 ₹ 25,799.88

43 Providing and fixing 1st quality non skid ceramic floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade etc. all complete as per direction of Engineer in charge. 25.00 Sqm ₹ 935.04 ₹ 23,376.00

44 Providing and fixing Ist quality ceramic glazed digital wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment/grout of matching shade complete 396.96 Sqm ₹ 1,065.50 ₹ 422,960.88

45 Providing and fixing 30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of ‘H’ section, a uPVC hollow section of size 100x30 mm and 2 mm (± 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. ‘U’ cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness . The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer’s specification and direction of Engineer-in-charge. 3.36 Sqm ₹ 2,734.29 ₹ 9,187.21

46 Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineerin-Charge 10.00 Rmt ₹ 414.03 ₹ 4,140.30

47 Providing and fixing IS : 12817 marked 100X58X1.90 mm stainless steel butt hinges with stainless steel screws etc. all complete as per specification and direction of Engineer In Charge. 6 Each ₹ 90.00 ₹ 540.00

48 Provision and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with fittings, standard size CP brass flush pipe, spreaders with unions and clamps (all in C.P brass) with waste fitting as per IS-2556. C.I trap with outlet grating and other coupling in C.P brass, including painting of fittings and cutting and making good the walls and floors where ever required etc. all complete as per specification and direction of Engineer In Charge. 3 Each ₹ 9,743.49 ₹ 29,230.47

49 Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS:8931 etc. all complete as per specification and direction of Engineer In Charge. 3 Each ₹ 425.88 ₹ 1,277.64

50 Providing and fixing 25 mm nominal bore gun metal gate valve with C.I. wheel of approved quality (screwed end) etc. all complete as per specification and direction of Engineer In Charge. 5 Each ₹ 523.03 ₹ 2,615.15

51 Providing and fixing 15 mm nominal bore angle C.P. stop cock of standard design and of approved make conforming to IS:8931 etc. all complete as per specification and direction of Engineer In Charge. 6 Each ₹ 563.40 ₹ 3,380.40

52 Providing and fixing White Vitreous China pedestal Wash basin size 630x450 mm with single 15 mm C.P. brass pillar taps with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require etc. all complete as per specification and direction of Engineer In Charge. 2 Each ₹ 2,711.22 ₹ 5,422.44

53 Providing and fixing Rectangular shape 453x357 mm mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing etc. all complete as per specification and direction of Engineer In Charge. 2 Each ₹ 1,144.37 ₹ 2,288.74

54 Providing & fixing Orissa pattern W.C Pan of size 580x440 mm white vitreous china water closet squatting pan (Indian type) along with “S” or “P” trap including dismantling of old WC seat and “S” or “P” trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material including malba etc. all complete as per specification and direction of Engineer In Charge. 2 Each ₹ 3,763.66 ₹ 7,527.32

55 Providing and fixing 15 mm nominal bore with 450 mm length unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour etc. all complete as per specification and direction of Engineer In Charge. 6 Each ₹ 102.44 ₹ 614.64

56 Providing and fixing 10 litre capacity - White P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures etc. all complete as per specification and direction of Engineer In Charge. 2 Each ₹ 1,000.55 ₹ 2,001.10

57 Providing and fixing 32mm dia. Semi rigid P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings etc. all complete as per specification and direction of Engineer In Charge. 6 Each ₹ 87.31 ₹ 523.86

58 Providing and fixing on wall face 110mm bore dia. unplasticised Rigid PVC rain water Single socketed pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion etc. all complete as per direction of Engineer in charge. 35.00 Rmt ₹ 317.14 ₹ 11,099.90

59 Providing and fixing on wall face 75mm bore dia. unplasticised Rigid PVC rain water Single socketed pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion etc. all complete as per direction of Engineer in charge. 40.00 Rmt ₹ 209.08 ₹ 8,363.20

60 Providing and fixing on wall face unplasticised - 110mm bore PVC moulded bend 87.5° for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion etc. all complete as per direction of Engineer in charge. 10 Each ₹ 126.34 ₹ 1,263.40

61 Providing and fixing on wall face unplasticised - 75mm bore PVC moulded bend 87.5° for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion etc. all complete as per direction of Engineer in charge. 15 Each ₹ 88.99 ₹ 1,334.85

62 Providing and fixing on wall face unplasticised - PVC moulded Single tee of 110x110x110 mm bore dia. without door for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion etc. all complete as per direction of Engineer in charge. 5 Each ₹ 186.01 ₹ 930.05

63 Providing and fixing 110mm size PVC(SWR) P trap shall having ISI mark etc. all complete as per direction of Engineer in charge. 2 Each ₹ 298.40 ₹ 596.80

64 Providing and fixing CP self closing 15mm size angle cock presmatic or urinal valve auto closing system with built in control cock with wall flange and 200mm or nearer connecting pipe of stainless steel of ISI mark etc. all complete as per direction of Engineer in charge. 3 Each ₹ 1,890.76 ₹ 5,672.28

65 Providing and fixing Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing etc. all complete as per direction of Engineer in charge. 27.90 Sqm ₹ 1,978.74 ₹ 55,206.85

66 Providing and laying Polished Granite stone flooring of Black, Cherry/Ruby Red or equivalent colour in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as per specification and direction of Engineer in charge. 840.00 Sqm ₹ 3,765.80 ₹ 3,163,272.00

67 Providing and fixing 100x100 mm size P type square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 etc. all complete as per specification and direction of Engineer In Charge. 4 Each ₹ 2,275.34 ₹ 9,101.36

68 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 2000 Ltr ₹ 9.24 ₹ 18,480.00

69 Providing and fixing Granite Stone of approved shade with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth 3.00 Sqm ₹ 3,404.92 ₹ 10,214.76

70 Providing and fixing 25 mm nominal dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 60.00 Rmt ₹ 337.44 ₹ 20,246.40

71 Providing and fixing 15 mm nominal dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 30.00 Rmt ₹ 241.01 ₹ 7,230.30

72 Providing and fixing 20 mm nominal dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 15.00 Rmt ₹ 281.51 ₹ 4,222.65

73 Providing and fixing Nahani grating of 100mm dia. etc. all complete as per direction of Engineer in Charge. 2 Each ₹ 23.53 ₹ 47.06

74 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth etc. all complete as per specification and direction of Engineer In Charge. 130.00 Sqm ₹ 629.66 ₹ 81,855.80

75 Providing and fixing M.S. tube hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer etc. all complete as per specification and direction of Engineer In Charge. 1079.97 Kg ₹ 165.38 ₹ 178,605.44

76 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer, fixed to openings /wooden frames with rawl plugs screws etc. all complete as per specification and direction of Engineer In Charge. 864.00 Kg ₹ 200.29 ₹ 173,050.56

77 Painting with synthetic enamel paint with two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture of required colour to give an even shade with preparation of surface etc. all complete as per specification and direction of Engineer In Charge. 2395.16 Sqm ₹ 190.13 ₹ 455,391.77

Sub Total Works Amount ₹ 32,968,026.01

I / We hereby quote percentage above (+) or below (-) the Estimated cost 0.00% ₹ 0.00

Sub Total Works Amount ₹ 32,968,026.01

ADD GST @ 18% (( IGST18%) or (CGST @ 9% +SGST@ 9%)), Whichever is applicable ₹ 5,934,244.68

GRAND TOTAL ₹ 38,902,270.69

Note : (i) : It is a percentage rate tender. Hence the tenderers are required to quote rates on percentage basis i.e. above or below the estimated cost put to tender. (ii) The quoted rates in the bill of quantities are inclusive of all types of taxes, duties levies, fees and charges etc., imposed by Central/ State Govt. and local bodies Compensation Cess, Labour Cess, Custom Duty, royalties and other levies. It shall also include all other costs including loading, un-loading, insurance, transportation, testing and Certification expenses except GST . GST at the prevailing percentage is added in the BOQ at the end.

GOODS AND SERVICE TAX (GST)

A Registration, HSN / SAC Code & GST Rate

1 Bidder should indicate GSTIN No. (Copy of GST registration to be enclosed) and PAN No. (copy of PAN to be enclosed).

2 Tender will be considered/ accepted, if & only if the vendor has a valid GST Registration No

3 Central Tax/ State Tax/ Integrated Tax/ Union Territory tax to be quoted as per GST Law

4 Bidders to ensure correct applicability of Central Tax/ State Tax/ Integrated Tax/ Union Territory tax based on the Inter / Intra state movement Supply of goods and provision services or both

5 Bidder shall mention the SAC Code/HSN Code for goods and services in accordance with GST law in their Bid and subsequently in their tax invoice. HAL, Koraput Division shall not be responsible for any error in SAC Code/HSN Code for goods and/or services specified by supplier/contractor

B Invoicing & Payment

6 The Tax Invoice for supply of Goods & Services should be raised as per the provision of GST Act & Rules and must compulsorily mention the following-

a. HAL, Korpaut Division GST registration number as 21AAACH3641R1ZJ

b. Name & address of supplier / Vendor/ Contractors

c. GSTIN of Supplier / vendors / Contractors

d. Consecutive Serial Number & date of issue

e. Description of goods or services

f. Total value of supply

g. Taxable value of supply

h. Tax Rate – Central Tax & State Tax or Integrated Tax, Cess

i. Amount of Tax charged

j. Place of supply

k. Address of delivery if different from place of supply

l. Signature of authorized signatory

7 Reimbursement of GST to the vendor is contingent upon complying with the following condition by the service provider

i. Uploading the (invoices raised on HAL, KoraputDivision ) onward GST Return (GSTR-1) in GSTN Network portal within the statutory time period

ii. Discharging the GST tax liability to the Government.

iii. Submission of Tax Invoice to HAL, Korpaut Division.

iv. Submission of proof of payment of GST to HAL, Korpaut Division.

v. Receipt of goods / services by HAL Koraput Division.

vi. Availment of Input Tax Credit by HAL, Korpaut Division .

C Input Tax Credit

8 In case GST credit is delayed/ denied to HAL, Korpaut Division, due to non/delayed receipt of goods and/or services and/or tax invoice or expiry of timeline prescribed in GST Law for availing such ITC, or any other reason not attributable to HAL, Korpaut Division, GST amount shall be recoverable from Vendor along with interest & penalty levied/ leviable on HAL, Korpaut Division, as the case may be

9 In case vendor delays declaring such invoice in his return and GST credit availed by HAL, Korpaut Division is denied or reversed subsequently as per GST law, GST amount paid by HAL, Korpaut Division towards such ITC reversal as per GST law shall be recoverable from vendor/contractor along with interest & penalty levied/ leviable on HAL, Korpaut Division.

10 In case of discrepancy in the data uploaded by supplier in the GSTN portal or in case of any incomplete work/service, then HAL, Korpaut Division will not be able to avail the tax credit and will notify the supplier of the same. Supplier has to rectify the data discrepancy in the GSTN portal or issue credit note (details to be uploaded in GSTN portal).

11 For any such delay in availing of tax credit for reasons attributable to vendor (as mentioned above), interest as per the GST Act & Rules, along with penalty, if any will be deducted for the delayed period i.e. from the month of receipt till the month tax credit is availed, from the running bills.

D Penalty for Non-compliance of GST Act

12 Penalty amount so determined along with GST if applicable thereon shall be recovered from the contractor.

E Anti-profiteering Measure .

13 Any reduction in rate of Tax on any supply of goods or services or the benefit of input tax credit shall be passed on to the recipient by way of commensurate reduction in prices. Bidders have to submit declaration in their bid that they have complied with ‘Anti-profiteering clause’ under GST law.

The bidder’s quoted rates/ price should be after considering the Input Credit under GST law at their end, since GST on output (GST amount charged in Invoice) will be paid by HAL.

F Other Provision

14 In case any changes in taxes and duties as per Gov. Notification (including GST), the same shall be applicable from time to time.

G Allottment of quarters

15 Quarters will be allotted to the awarded agency subject to availability & recommendation from the E-I-C/ O-I-C for which rents as applicable will be recovered from the running bills of the agency.