SPECIAL REPAIRS TO BLDG NO V (PARTLY) INSIDE FORT ST. GEORGE UNDER GE CHENNAI

Amount

Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work, complete all as specified and directed.

M&L for flyash brick work with old size bricks straight or curved on plan exc 6M mean radius built in CM 1:6 complete all as specified and directed.

M & L for Brickwork with fly ash bricks ,straight or curved in any radius in half brick thick walls built in cement mortar 1: 4 complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubbing down with water etc, and removing unserviceable material outside cantt area, complete all as specified and directed.

M & L for 15 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces finished the surfaces even and smooth without using extra cement complete all as specified and directed.

M & L for Preparation of new plastered surfaces of wall and applying plaster of Paris putty of 1 mm thickness over newly plastered surface to prepare the surface even and smooth and applying two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete all as specified and as directed

M & L for 15 mm thick rendering on fair faces of brick work or concrete surfaces of walls etc 10 mm thick im CM 1:6 and 5 mm thick in CM 1:4 mixed with water proofing compound as per manufacturers instruction & finished the surfaces even and smooth without using extra cement, complete all as specified and directed. note : WPC WILL BE MEASURED AND PAID SEPERATELY

Supply only Liquid water proofing compoud

Dubbing out average 15mm thick on irregular face of walls in patches in CM (1:4) complete all as specified and directed.

Material and labour for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489-2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces complete including preparation of newly plastered surfaces of walls all as specified and as directed. Make : APEX of Asian or equivalent of Shalimar / Nerolac/ Berger.

Material and labour for complete removal of existing treatment and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489-2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces complete including preparation of newly plastered surfaces of walls all as specified and as directed. Make : APEX of Asian or equivalent of Shalimar / Nerolac/ Berger.

M & L for complete removal of existing treatment on wall surfaces and washing, rubbing down and applying two coats of oil bound distemper over a coat of alkali resistant primer and 1 to 1.5 mm thick wall care putty on old surfaces of wall complete all as specified and as directed.

M & L for preparation of new wall surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer and 1mm thick putty complete all as specified and directed.

M & L for preparing new surfaces of ceilings and applying three coats of white wash complete all as specified and directed.

M & L for preparing old surfaces of ceiling and applying two coats of white wash complete all as specified and directed.

M&L for rendering 5mm thick in CM 1:3 in patches on ceiling area on fair surfaces of concrete surfaces finished even and smooth complete all as specified and directed.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S&F pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of existing galvalume sheets complete all as specified and as directed.

S&F pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F for framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc10 kg each brackets, conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed

Demolition of Stone slabs and tiles of laid bedded and pointed in cement mortar or in any description or thickness in floors, platforms, aprons etc. complete all as specified and as directed.

M & L for 75 mm thick, plain cement concrete 1:3:6, type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection etc, finishing surface even and smooth without using extra cement complete all as specified and directed.

M & L for non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 Sqm but not exc 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6 complete all as specified and as directed.

All as per item No. 21 above but on skirting/dado including backing coat of 10 mm thick in CM 1:4 complete all as specified and as directed.

M&L PCC 1:2:4, Type B1 (using 20 mm graded stone aggregate), 25 mm thick, as in floors complete all as specified and directed

M&L Granite (of any type) slab 20mm thick machine cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and moulding the edge, hole for gas pipe and polishing complete as in cooking platform including Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:4 complete all as specified and as directed.

M&L Machine cut kota stone slab flooring 20-25mm thick over 15mm thick screed in CM(1:6) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified and as directed.

M&L Kota stone slab 20-25mm thick in riser of steps, skirting, dado & pillar over 15mm thick plater in CM (1:3) & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified and as directed.

Demolition of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

M & L for galvanised powder coated snap grid framework of size 605 x 605mm for false ceiling all as specified including vinyl laminated MPL gypsum panels ( GYPTECH) 9mm thick of size 60 x 60 cm fixing with staples on snap grid by means of GI wires not less than 4mm dia hooks and raw plug etc centre of make. GYPTECH /ARMSTRONG or equivalent including taking down existing false ceiling with frame work any type complete all as specified and directed.

S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing.

S&F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC Frame as per specification and drawing inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing.

Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area nexc.1.5 sqm each including separating guard bars/grills/wire mesh etc., all as specified and as directed by the Engineer-in-Charge.

Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area exceeding 1.5 sqm and not exceeding 4.00 Sqm each including separating guard bars/grills/wire mesh etc., all as specified and as directed by the Engineer-in-Charge.

Taking down shutters of any description exc. 1 sqm but not exc. 2 sqm each including builders hardware complete all as specified and as directed.

Taking down door shutters of any description exc 1 Sqm and n.exc 2 Sqm and refixing in the same opening after laying floor tiles and making necessary alterations to the size of shutters to suit with the door opening to the required height all as specified and as directed.

S&F 2nd class hardwood plain solid straight chowkats and frames wrought framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

M&L for 35mm thick second class hard wood Glazed and skeleton shutters open rebated and prepared to receive glass, gauze, etc. without sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a); supplied and fitted to chowkats complete all as specified and as directed.

S & F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

S&F 2nd class hard wood panelled shutters 35mm thick, plain framed (any no of panels) with panels of timber flat on both sides (feather edged) or 12mm veneered particle board commercial veneering on both faces, the size of rail and stile as per IS :1003(Part-I), kiln seasoned and chemically treated and fitted to chowkats complete all as specified and as directed.

M & L for MS work in bands, straps, supports of stays, sunshade brackets, hook and pintle hinges, clamps, hold fasts, including fencing post etc., and similar conforming to grade Fe-290 Grade 165 complete all as specified and as directed.

M&L for preparing surfaces of wood and wood based materials treating ends of posts, back of chowkats etc with tar or coal tar black paint area exc 0.1sqm but n.exc 0.5sqm each complete all as specified and as directed.

M&L for preparing surfaces of wood and wood based materials treating small articles such as hold fast etc with tar or coal tar black paint area n.exc 0.1sqm each complete all as specified and as directed.

M&L for applying two coats of synthetic enamelled paint over a coat of red oxide on steel or iron surface based materials of any description , not other wise described over 10 cm width or girth including preparation of new surfaces complete all as specified and directed.

M & L for applying two coat of synthetic enamel paint over a coat of pink primer including preparation of new wood surfaces of any description not otherwise described over 10 Cm girth or width complete all as specified and as directed.

M & L for applying one coat of synthetic enamelled paint including preparation of old treated wood surfaces of any description not otherwise described over 10 Cm girth or width all as specified and as directed.

S&F Solid PVC door frame of size 50mmx47mm made out of 5mm thick plain colour PVC sheet reinforced with 19mm MS square tube of 19 gauge metred cut at two corners and joined by inserting two Nos of 150mm long brackets of 15mm x 15mm MS square tube inside the 19mm x 19mm square tube fixed to wall in repairs by drilling 100mm long MS screws using PVC fastener all as per specification and directed.

S&F Factory Made Solid PVC Moulded Door Shutter, with particle board core 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame as per specification and drawing and all as directed.

S&F powder coated Anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified (Thickness of powder coating not less than 50 micron) complete all as specified and as directed.

S&F aluminium powder coated sliding window USING THREE TRACK using aluminium section weighing not less than 0.900 Kg per RM for frame and 0.48 Kg per RM for sliding shutters including aluminium anodised snap beads, screws and fixed along with same section in three rolling sliding shutters two for fully glazed with 4mm thick tinted glass fixed with glazing clips, and one for wire mesh shutters) etc (The rate is inclusive of all fixings of builders hard ware such as wiremesh hinges, bow handles, locking arrangements etc complete all as specified and as directed.

S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete all as specified and as directed.

S&F in repair Aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.4mm fixed with aluminium wire staples fixed to wood/steel frames fixed in repairs complete all as specified and as directed.

S&F Aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.4mm fixed with aluminium wire staples fixed to wood/steel frames complete all as specified and as directed.

M&L for Prelaminated particle board 18/19 mm thick exterior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws as in cupboard shutter and shelves etc fixed in repairs including Ist class hard wood bedding all around the shutter and paints with synthetic enamel paint to beading complete all as specified and as directed.

S&F stainless steel 100 mm butt hinges medium weight ISI marked complete all as specified & directed.

S&F extruded Aluminium alloy handles fabricated type anodised 150 mm size complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts of extruded section 150mm long complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts of extruded section 200mm long complete all as specified and directed.

S & F 300mm long mild steel ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and directed.

S&F Ball catches with 8mm dia steel ball and brass body and skirting plate including letting in and fixed overall length of cover plate 150mm complete all as specified and as directed.

S&F in repairs 20mm dia mild steel CP curtain rod with brackets, stops rollers etc complete all as specified and as directed.

S & F aluminium alloy, anodised sliding door bolts 300mm long with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections as specified and as directed.

Dismantling water tanks and removing to store capacity exc 500 ltr & n exc 1000 ltr complete all as specified and directed.

S&F Rotational moulded polyethylene water tank (cylindrical vertical closed top) hoisted and fixed in position capacity of tank 1000 ltrs including S&F 25 mm ball PTMT Ball valve high pressure with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe complete all as specified and directed.

S & F in repairs Vitreous china wash down water closet (pedestal pattern ) white (ETWC) and fixed including Plastic seat cover, closed patttern with flat bottom, and cover and Mild steel chromium plated hinging device complete all as specified

S &F Vitreous china wash down water closet, white, squatting pan Orissa pattern of size 550x440mm with integral foot rest including making necessary connections to soil pipes and flushing cistern, fixed as in repairs complete all as specified and as directed.

S&F in repairs PVC low level flushing cistern 10 ltrs capacity with complete accessories, PVC flush pipe, PVC over flow pipe, etc.and connected to water closet as per manufacturer's instruction and as directed by the Engineer in charge

S&F in repairs vitreous china wash basin of oval type including counter top granite platform , waste coupling, waste pipe and brackets etc complete all as specified and as directed.

S & F in repairs 15mm Bib taps cast copper alloy, fancy type, chromium plated with crutch or butterfly handle, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F 15mm dia concealed Brass Angle stop valves chromium plated, fancy type with long shank and cup concealed type screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed in repairs complete all as specified and directed.

S&F in repairs 15mm dia Brass stop valves chromium plated, fancy type with long shank and cup concealed type screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and directed.

S&F 15mm dia pillar taps, cast copper alloy with capstan heads, chromium plated fancy type, screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipes fixed in repairs complete all as specified and as directed.

S&F in repairs for two way bib tap 15 mm bore chromium plated with crutch or butterfly handle, fancy type with long shank screwed down both ends for pipes or for union complete all as specified and directed.

S&F in repairs health faucet (Hand shower) with 1metre flexible tube with wall hook, Chromium Plated of make that shall match with existing fitting i.e, Prayag complete all as specified and as directed.

S&F in repairs 15mm PVC connection with two brass nuts 450mm long of superior quality complete all as specified and as directed.

S&F in repairs 125mm Chromium plated brass shower roses with or without swivel joints, including fixing to steel pipe or union complete all as specified and as directed.

Supply and fix in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.

S&F Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and as directed.

S&F sink with draining board made of stainless steel 1mm thick kitchen or laboratory with plugs washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including waste pipe in repairs complete all as specified and as directed.

S&F in repair 20mm dia Tubular towel rail 600mm long between flanges 'D' type brass chromium plated, fixed to wall with brass screws and wooden/plastic cleats complete all as specified and directed.

S&F Shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 300gm) including taking down old one complete all as specified and directed.

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing), removing unserviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M & L for non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exc 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6 complete all as specified and as directed.

M & L for glazed ceramic coloured tiles in vertical surface 300x250x7mm/450x350x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match including Rendering 10mm thick in CM 1:4 for receiving wall tiles on fair faces of brick work or concrete surfaces finished fair and even complete all as specified and as directed.

Taking up or down steel tubing and connections including cleaning for refixing or removal to store 15mm dia complete all as specified and as directed.

Taking up or down steel tubing and connections including cleaning for refixing or removal to store 20mm dia complete all as specified and as directed.

Taking up or down steel tubing and connections including cleaning for refixing or removal to store 25mm dia complete all as specified and as directed.

Supply & Laying of CPVC Pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceilings or laying in floors complete all pipe fittings and including taking up or down in the existing pipe line completely all as specified for following pipes :-(a) 20mm outer dia bore

(b) 25mm outer dia bore

(c) 32mm outer dia bore

M & L for Cutting holes into or through brick walls built in cement mortar and making good in PCC (1:2:4) type B-1 as required Superficial area not exc 150 Sq CM complete all as specified and as directed.

S & F PVC (SWR) pipes 110mm single socketed, in any length with rubber ring joints fixed to walls etc complete including dismantling existing pipes along with fittings all as specified and directed.

S & F PVC (SWR) pipes 110mm single socketed, in any length with rubber ring joints laid in trenches or in floor complete including dismantling existing pipes along with fittings all as specified and directed.

S & F PVC (SWR) pipes 150mm single socketed, in any length with rubber ring joints laid in trenches or in floor complete including dismantling existing pipes along with fittings all as specified and directed.

S & F PVC (SWR) pipes 75mm single socketed, in any length with rubber ring joints fixed to walls etc complete including dismantling existing pipes along with fittings all as specified and directed.

S & F PVC (SWR) bends 110 mm bore any radius with oval access door complete all as specified and directed.

S & F PVC (SWR) bends 75 mm bore any radius with oval access door complete all as specified and directed.

S & F PVC (SWR) Junction (Single T) 75 mm bore with oval access door complete all as specified and directed.

S & F (SWR) branch Single (single Y) equal or unequal for 110 mm bore pipe with oval access door complete all as specified and as directed.

S & F (SWR) vent cowl suitable for 110 mm bore pipe complete all as specified and as directed.

M&L for 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specially provided for complete all as specified and as directed.

M & L for reinforced cement concrete Type B1 1:2:4 using 20mm graded aggregate in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for form work to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels etc fair finished surfaces of concrete complete all as specified and directed.

M&L for Precast cover slab 1:2:4, type B1 (using 20mm graded aggregate) in landings, cover slabs (for manholes etc.,) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in CM 1:4, for manholes etc complete all as specified and as directed. Note: Reinforcement will be measured and paid seperately.

M/L 10mm dia and over TMT bars as in reinforecment cut to length bent to shape required including cranking hooking ends and binding with mild steel wire( annealed) not less than 0.9 mm dia (or) securing with clips all as specified and as directed

M/L 5mm dia and over upto and including 10mm dia TMT bars as in stirrups cut to length bent to shape required including cranking hooking ends and binding with mild steel wire( annealed) not less than 0.9 mm dia (or) securing with clips all as specified and as directed

S & F Stainless steel plate rack of size 24X36X10 inch fixed on wall with stainless screw with wooden plugs near the kitchen sink including all accessories and making good the disturbed wall tiles/concrete surface all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

M&L for Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming to Fe 410 -W(Gde-E- 250) quality-A complete all as specified and directed.

M&L for point wiring of size 1.5 sqmm with PVC insulated unsheathed multistranded copper conductor cable of 1100V grade drawn through new non metallic rigid PVC conduit including accessories, concealed in wall/floor and fixed on ceiling/roof etc, including pressed steel terminal boxes concealed in walls for housing modular switchs,sockets, fan regulators etc., incl provn of 1.5 sqmm PVC insulated copper earth conductor cable for earth continuity and connecting to common earth dolly including taking down carefully copper/aluminium point wiring light, fan, socket or power complete with fittings such as switches, ceiling roses, regulators sockets etc and making good disturbed surfaces of walls, floors to match with the existing surface complete all as specified and as directed for :- (a) one light point controlled by one switch

(b) one fan point controlled by one switch

( c) one 3 pin socket outlet 5 amps on the same board controlled by one switch.

(d) one 3 pin socket outlet 5 amps on independent board controlled by one switch.

one bell/buzzer point controlled by one bell push

As per above item No.113 for one socket outlet three pin 15 amps control by one switch independent board with cable 2.5 sqmm size complete all as specified and directed.

As per above item No.113 for one socket outlet three pin 15 amps control by one switch independent board with cable 4.0 sqmm size complete all as specified and directed.

M&L for point wiring of size 1.5 sqmm (two run) with PVC insulated unsheathed multistranded copper conductor cable of 1100V grade drawn through non metallic rigid Existing PVC conduit , in wall/floor and fixed on ceiling/roof etc, including pressed steel terminal boxes concealed in walls for housing modular switches,sockets, fan regulators etc., including provn of 1.5 sqmm PVC insulated copper earth conductor cable for earth continuity and connecting to common earth dolly complete for :- (a) one light point controlled by one switch

(b) one fan point controlled by one switch

( c) one 3 pin socket outlet 5 amps on the same board controlled by one switch.

(d) one 3 pin socket outlet 5 amps on independent board controlled by one switch.

As per above item No.116 for one socket outlet three pin 15 amps control by one switch independent board with cable 2.5 sqmm size complete all as specified and directed.

S& F for modular cover plate with frame 3 module complete all as specified and directed.

S& F for modular cover plate with frame 4 module complete all as specified and directed.

S& F for modular cover plate with frame 6 module complete all as specified and directed.

S&F modular switches suitable for type AC 240V, 6 amps 1 module complete all as specified and directed.

S&F modular sockets suitable for type AC 240V, 6 amps 2 module complete all as specified and directed.

S&F modular switches suitable for type AC 240V, 16 amps 1 module complete all as specified and directed.

S&F modular power sockets suitable for type AC 240V, 16 amps 2 module complete all as specified and directed.

S&F modular fan regulator suitable for type AC 240V, 2 module complete all as specified and directed.

S&F modular bell switch suitable for type AC 240V, 16 amps 1 module complete all as specified and directed by Engr-in-Charge

S&F call bell of multi music type A/C 230 volts complete all as specified and directed.

S&F ceiling rose , polycarbonate, isolated body with 2 to 3 terminals complete all as specified and directed.

S& F ceiling fan 230v,1200 mm sweep, five star rating with brushless conductor motor complete with blades, down rods, electronic regulator and accessories complete including taking down ceiling fan and removing blades and fan body and depositing in store including connecting rod, cotter pins and all accessories completeall as specified and as directed.

Supply and fix exhaust fan, steel body AC Single phase230V of size 300mm sweep with blades and frames louvers complete and old fan deposit to E/M store complete all as specified and directed.

S&F lamp holder insulated body with back plate for batten fittings/angle holder complete all as specified and as directed

S&F of LED bulb 9 w high suitable for lamp holder including taking down carefully unserviceable fittings and making good disturbed surfaces of walls, floors to match with the existing surface complete all as specified and as directed. Make : Havells Cat No. LED PLUS 9W B22 CDL 2STAR LAMP or techno commercial equivalent in Philips /Bajaj

S & F 20 Watts LED COOL LIGHT fitting, surface mounting general purpose LED Battens in Extruded Aluminum housing with wide range of wattages to suite variety of application areas, complete including taking down all as specified and directed by the Engr-in-Charge. Make : Havells Cat No. LUMILINEPLUSNEOBS20WLED865SPCSSIND or techno commercial equivalent Philips/Bajaj.

S & F 10 Watts LED COOL LIGHT fitting, surface mounting general purpose LED Battens in Extruded Aluminum housing with wide range of wattages to suite variety of application areas, complete including taking down all as specified and directed by the Engr-in-Charge. Make : Havells Cat No. LUMILINEPLUSBS10WLED865SPCSSIND or techno commercial equivalent Philips/Bajaj.

S & F 10 Watts COOL LIGHT environmental friendly, ultra modern, energy saving, surface mounted, decorative hexagon bulk head back-lit LED luminaries comprising of high brightness LEDs, incl taking down unserviceable fittings of any size and capacity complete and making good disturbed surfaces of walls, floors to match with the existing surface complete all as specified and as directed. Make Havells Cat No. HEXAFT10WLED857SSYMBOPC or techno commercial equivalent in Philips /Bajaj.

S & F 36 Watts 2x2 ceiling COOL LIGHT a versatile 2X2 surface mounted to provide soft light and glare free symmetrical illumination, including taking down unserviceable fittings and making good disturbed surfaces of walls, floors to match with the existing surface complete all as specified and as directed. Make Havells Cat No. VENUSNEO2X2PLR36WLED865G2 or equivalent in Philips/Bajaj.

S&F sub main wiring complete with two runs of 6 sqmm PVC insulated unsheathed single core multistrand copper conductor cable of 1100 volts grade drawn through new non metallic rigid PVC conduit pipe concealed in wall alongwith accessories fixed on walls/floors/ceiling with one run of 6 sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor including taking down all as specified and directed by Engr-in-Charge. Note:- two runs of PVC insulated cable 6 sqmm + one run 6 sqmm of earth wire and one run of conduit including accessories shall be measured as one length. (From TPN DBs to SPN DB)

S&F MCB distribution board made of CRCA sheet, powder coated paint conforming of IS 13032, double door fixed in switch boards/wall at various places of capacity 415 volts 6 way MCB DB, TPN with 200 Amp rated bus bar shall conform to IP 38 protection including taking down complete after taking proper disconnecting of electric supply properly and making good surface complete all as specified and directed.

S&F MCB distribution board made of CRCA sheet, powder coated paint comforming of IS 13032, double door fixed in switch boards/wall at various places of capacity 240 volts 12 way MCB DB, SPN with 200 Amp rated bus bar shall conform to IP 38 protection including taking down complete after taking proper disconnecting of electric supply properly and making good surface complete all as specified and directed.

S&F MCB of rating 415 Volts, TPN 100 Amps complete all as specified and directed by Engr-in Charge including taking down complete after taking proper disconnecting of electric supply properly and making good surface complete all as specified and directed.

S&F MCB of rating 240 Volts, SPN 63 Amps including taking down complete after taking proper disconnecting of electric supply properly and making good surface complete all as specified and directed.

S&F MCB of Single pole of rating 6 to 32 Amps 240 Volts including taking down complete after taking proper disconnecting of electric supply properly and making good surface complete all as specified and directed.

DJ Group (BID ID -3466853)

M/SJAYAM CONSTRUCTIONS (BID ID -3464022)

JK INFRA (BID ID -3464105)

SHRI LAKSHMI ENTERPRISES (BID ID -3469317)

G.L.THIRUMALAI NAIDU AND COMPANY (BID ID -3469278)

YOGAA MANPOWER AGENCY (BID ID -3469390)