Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹39.8 LAccepted-AOC 104 TRADE CORNER PREMISES ANDHERI KURLA ROAD SAKINAKA JUNCTION MUMBAI MAHARASHTRA 400072 | MUMBAI SUBURBAN | MAHARASHTRA | 400072 | ₹39.8 L | L-1 | Accepted-AOC L-1 Bidder |
| 2 | L-2₹40.0 L+₹24,100 (0.61%)Rejected-Finance | ₹40.0 L+₹24,100 (0.61%) | L-2 | Rejected-Finance Quoted Higher then L-1 |
| 3 | L-3₹42.1 L+₹2.4 L (5.96%)Rejected-Finance | ₹42.1 L+₹2.4 L (5.96%) | L-3 | Rejected-Finance Quoted Higher then L-1 |
| 4 | L-4₹49.5 L+₹9.8 L (24.6%)Rejected-Finance | ₹49.5 L+₹9.8 L (24.6%) | L-4 | Rejected-Finance Quoted Higher then L-1 |
| 5 | L-5₹50.5 L+₹10.7 L (27.0%)Rejected-Finance | ₹50.5 L+₹10.7 L (27.0%) | L-5 | Rejected-Finance Quoted Higher then L-1 |
| Sl No | Description | Qty | Unit | Chinmoyee Construction L3 | ADARSH INFRAINTERIO PVT LTD L1 | CONSTRUCTION SKILL CO L5 | BHATIA ENGINEERING WORKS L4 | MAVERICK AIRPORT SRVICES PVT LIMITED L2 |
|---|---|---|---|---|---|---|---|---|
| 1.00 | Immigration Counters/ Emigration Counter
Providing and placing standard Immigration counter unit of size 2.2m length, 1.8m width and 1.2m height as per drawing shown and the specifications are broadly as follows:
1. Counter top/ working desk with solid acrylic polymer of approved color pasted on 19mm commercial plywood.
2. Outer face with solid acrylic polymer of approved make of 12mm thick, two color combinations other than white of approved color on 19mm thick commercial plywood.
3. Inner face with laminated finish of approved color on 19mm thick commercial plywood.
4. Bottom floor with 19mm commercial plywood and PVC flooring raised above 150mm from finished floor level.
5. Single leaf door of 12mm thick swing opaque glass with necessary hinges of make Dorma/ Ozone and locking arrangement etc.
6. 03 Drawers of 300mm wide below working desk as per drawing shown at each side.
Rate will be inclusive of all fixtures like stainless steel fancy handle(200mm), stainless steel soft closing spring hinges, stainless steel soft closing heavy type telescopic drawer channels, screws, recessing, edge binding, provision of holes, finishing , etc.
The work shall be execute as per drawing in all dimensions, specifications and the direction of Engineer-In-Charge. Supplier shall submit samples of solid acrylic polymer, laminate, plywood/board for approval. | 7 | Each | 2,50,000 ₹17,50,000 | 2,55,000 ₹17,85,000 | 2,75,000 ₹19,25,000 | 2,18,794 ₹15,31,558 Lowest | 2,21,500 ₹15,50,500 |
| 2.00 | Check-in Counters
Providing and placing standard Check in counter unit of size 1.00 m length, 0.90 m width and 1.20 m height as per drawing shown and the specifications are broadly as follows:
1. Counter top/ working desk with solid acrylic polymer of approved make and approved color pasted on 19mm commercial plywood.
2. Outer face with solid acrylic polymer of approved make of 12mm thick, two color combinations other than white of approved color on 19mm thick commercial plywood.
3. Inner face with laminated finish of approved color on 19mm thick commercial plywood.
4. Monitor rack, Drawers, ATB, BTP, false floor arrangement etc. should be provided as per the drawing.
Rate will be inclusive of all fixtures like stainless steel fancy handle(200mm), stainless steel soft closing spring hinges, stainless steel soft closing heavy type telescopic drawer channels, screws, recessing, edge binding, provision of holes, finishing , etc.
The work shall be execute as per drawing in all dimensions, specifications and the direction of Engineer in-charge.Supplier shall submit samples of solid acrylic polymer, laminate, plywood/board for approval. | 21 | Each | 83,000 ₹17,43,000 | 75,000 ₹15,75,000 Lowest | 1,05,000 ₹22,05,000 | 1,05,544 ₹22,16,424 | 77,000 ₹16,17,000 |
| 3.00 | Custom Counters
Providing and placing standard custom counter unit of size 0.90 m length, 0.45 m width and 1.05 m height as per drawing shown and the specifications are broadly as follows:
1. Counter top/ working desk /writing desk with solid acrylic polymer of approved make and approved color pasted on 19mm commercial plywood.
2. Outer face with solid acrylic polymer of approved make of 12mm thick, of two approved color combinations other than white of approved color on 19mm thick commercial plywood.
3. Inner face with laminated finish of approved color on 19mm thick commercial plywood.
4. 02 Drawers as per drawing shown at each side.
Rate will be inclusive of all fixtures like stainless steel fancy handle(200mm), stainless steel soft closing spring hinges, stainless steel soft closing heavy type telescopic drawer channels, screws, recessing, edge binding, provision of holes, finishing , etc.
The work shall be execute as per drawing in all dimensions, specifications and the direction of Engineer in-charge. Supplier shall submit samples of solid acrylic polymer, laminate, plywood/board for approval. | 4 | Each | 80,000 ₹3,20,000 | 42,000 ₹1,68,000 Lowest | 60,000 ₹2,40,000 | 59,738 ₹2,38,952 | 46,400 ₹1,85,600 |
| 4.00 | Inspection Table
Providing and placing Customs inspection table unit of size 2.40 m length, 0.80 m width and 0.60 m height as per drawing shown and the specifications are as follows:
1. Table top should be provided with Granite of thickness 18mm over supporting members.
2. Outer face with solid acrylic polymer of approved make of 12mm thick, of two approved color combinations other than white of approved color on 19mm thick commercial plywood.
Rate will be inclusive of all fixtures like stainless steel fancy handle(200mm), stainless steel soft closing spring hinges, stainless steel soft closing heavy type telescopic drawer channels, screws, recessing, edge binding, provision of holes, finishing , etc.
The work shall be execute as per drawing in all dimensions, specifications and the direction of Engineer in-charge. Supplier shall submit samples of solid acrylic polymer, laminate, plywood/board for approval. | 8 | Each | 50,000 ₹4,00,000 Lowest | 56,000 ₹4,48,000 | 84,900 ₹6,79,200 | 1,20,866 ₹9,66,928 | 80,875 ₹6,47,000 |
Tender Value
₹52.0 L
EMD Value
₹1.0 L
Closing Date
29 Apr 2024, 6:00 pmClosed
AGM (E-C)
O/o AGM (E-C) S V Airport Raipur
Providing and placing Check in counters, Immigration counters, Custom Counters, etc at S.V. Airport, Raipur.
2024_AAI_192705_1
AAI/RPR/AGM (E-C)/Check-In Counter/2024
Open Tender
Civil Works
Works
90 days
S V Airport Raipur
Please refer Tender documents.
11 documents required · 11 mandatory
₹1,120
₹1.0 L
28 Aug 2026
2 Apr 2024
1 May 2024
2 Apr 2024
29 Apr 2024
2 Apr 2024
2 Apr 2024 - 25 Apr 2024
Amount
Immigration Counters/ Emigration Counter Providing and placing standard Immigration counter unit of size 2.2m length, 1.8m width and 1.2m height as per drawing shown and the specifications are broadly as follows: 1. Counter top/ working desk with solid acrylic polymer of approved color pasted on 19mm commercial plywood. 2. Outer face with solid acrylic polymer of approved make of 12mm thick, two color combinations other than white of approved color on 19mm thick commercial plywood. 3. Inner face with laminated finish of approved color on 19mm thick commercial plywood. 4. Bottom floor with 19mm commercial plywood and PVC flooring raised above 150mm from finished floor level. 5. Single leaf door of 12mm thick swing opaque glass with necessary hinges of make Dorma/ Ozone and locking arrangement etc. 6. 03 Drawers of 300mm wide below working desk as per drawing shown at each side. Rate will be inclusive of all fixtures like stainless steel fancy handle(200mm), stainless steel soft closing spring hinges, stainless steel soft closing heavy type telescopic drawer channels, screws, recessing, edge binding, provision of holes, finishing , etc. The work shall be execute as per drawing in all dimensions, specifications and the direction of Engineer-In-Charge. Supplier shall submit samples of solid acrylic polymer, laminate, plywood/board for approval.
Check-in Counters Providing and placing standard Check in counter unit of size 1.00 m length, 0.90 m width and 1.20 m height as per drawing shown and the specifications are broadly as follows: 1. Counter top/ working desk with solid acrylic polymer of approved make and approved color pasted on 19mm commercial plywood. 2. Outer face with solid acrylic polymer of approved make of 12mm thick, two color combinations other than white of approved color on 19mm thick commercial plywood. 3. Inner face with laminated finish of approved color on 19mm thick commercial plywood. 4. Monitor rack, Drawers, ATB, BTP, false floor arrangement etc. should be provided as per the drawing. Rate will be inclusive of all fixtures like stainless steel fancy handle(200mm), stainless steel soft closing spring hinges, stainless steel soft closing heavy type telescopic drawer channels, screws, recessing, edge binding, provision of holes, finishing , etc. The work shall be execute as per drawing in all dimensions, specifications and the direction of Engineer in-charge.Supplier shall submit samples of solid acrylic polymer, laminate, plywood/board for approval.
Custom Counters Providing and placing standard custom counter unit of size 0.90 m length, 0.45 m width and 1.05 m height as per drawing shown and the specifications are broadly as follows: 1. Counter top/ working desk /writing desk with solid acrylic polymer of approved make and approved color pasted on 19mm commercial plywood. 2. Outer face with solid acrylic polymer of approved make of 12mm thick, of two approved color combinations other than white of approved color on 19mm thick commercial plywood. 3. Inner face with laminated finish of approved color on 19mm thick commercial plywood. 4. 02 Drawers as per drawing shown at each side. Rate will be inclusive of all fixtures like stainless steel fancy handle(200mm), stainless steel soft closing spring hinges, stainless steel soft closing heavy type telescopic drawer channels, screws, recessing, edge binding, provision of holes, finishing , etc. The work shall be execute as per drawing in all dimensions, specifications and the direction of Engineer in-charge. Supplier shall submit samples of solid acrylic polymer, laminate, plywood/board for approval.
Inspection Table Providing and placing Customs inspection table unit of size 2.40 m length, 0.80 m width and 0.60 m height as per drawing shown and the specifications are as follows: 1. Table top should be provided with Granite of thickness 18mm over supporting members. 2. Outer face with solid acrylic polymer of approved make of 12mm thick, of two approved color combinations other than white of approved color on 19mm thick commercial plywood. Rate will be inclusive of all fixtures like stainless steel fancy handle(200mm), stainless steel soft closing spring hinges, stainless steel soft closing heavy type telescopic drawer channels, screws, recessing, edge binding, provision of holes, finishing , etc. The work shall be execute as per drawing in all dimensions, specifications and the direction of Engineer in-charge. Supplier shall submit samples of solid acrylic polymer, laminate, plywood/board for approval.
MAVERICK AIRPORT SRVICES PVT LIMITED
Chinmoyee Construction
BHATIA ENGINEERING WORKS
CONSTRUCTION SKILL CO
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .