PROVN OF SALVAGE YARD WITH CEMENTED HARD STANDING AND FENCING IN STATION LGS SECTION AND COMPOUND WALL WITH GATES IN SMQ AT AF STN DADRI UNDER AOR OF GE (AF) FARIDABAD

Surface excavation exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil, complete all as specified and directed.

M&L for hardcore of broken stone of gauge exc 63mm deposited, spread and levelled in layers exc 15cm thick watered and rammed to a true surface complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

M&L for sand filling under floors or in foundation including watering and consolidating complete all as specified and directed

M&L for machine pressed precast concrete interlocking paver block any shape and size with grey cement and coloured pigment confirming to IS 15658-2006 of 80mm thickness M-40 grade complete all as specified and directed.

M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate as in side of path/ benching/coved fillets etc rounded or chamfered on edges complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:4 on brick/concrete surfaces finished even and smooth without using extra cement complete all as specified and directed

M&L for preparation of new plastered surfaces and applying two coats of cement base paint of approved shade on walls complete all as specified and directed.

S&F rolled mild steel frame work as in doors or gates of angle or other section confirming to Fe 410-W (Gde E-250 quality-A) with gusset plates rails braces etc complete drilled for fixing of steel sheeting or other covering door etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging also fastering and fixing complete all as specified & directed by Engineer-in-charge.

Excavation in post holes (or similar holes) each n.exc 0.5 cum getting out returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm watering and removing surplus soil to a distance n,exc 50m complete all as specified and directed.

Material and labour for PCC 1:3:6 type C-2 using 40 mm graded stone aggregate in foundation filling and mess concrete and filling of footing of fencing post etc complete all as specified and directed.

S&F for mild steel work such as in angle iron flat iron fillets etc for horn, fixing of barbed wire to RCC post, securing wire mesh etc including all necessory cuttings, drilling bolting or riveting etc and including 10mm MS bars as in tie bars fixed to fencing posts including necessory welding where required as per site requirement and other similar works conforming to Fe-290 Gde E-165, complete all as specified and directed.

S&F Mild steel screw bolt (Machine made) with haxagonal or square heads at one end and screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut length of bolt exc 5cm but n, exc 10cm long and dia 5 to 10mm complete all as specified & directed.

Supply only chain link MS galvanised fencing of any size and type, complete all as specified and directed.

Fixing only chain link fencing including line wires any mesh, size and type to any type of standerd rails straining bolts etc including provision of binding wire complete all as specified and directed. Note : Supply of chain link shall be measured separatly.

M&L round bars Fe 410W of 10mm dia and above cut to lengh, bent to shape required indluding cranking bending spirally for hooping and fixing as required complete all as specified and directed

S&F Galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm specifing and staining and fixing to any type of standard rails staining bolts including securing or tying at crossings with and provision of galvanised mild steel wire staples or steel pins etc complete all as specified and directed. Note : Each line of horizontal/vertical/siagonal wire to be measured for the purpose of payment.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m deep or for foundation etc and for shafts wells, manholes or similar items n, exc 10 sqm on plan and n, exc 1.5m in depth and getting out in soft/loose soil, complete all as specified and directed.

Returning filling in incl spreading levelling watering and well ramming in layers n, exc 25cm thick in soft loose soil, complete all as specified and directed.

Removing excavated material to a distance not exc 50m and depositing where directed, complete all as specified and directed.

Material and labour reinforcement TMT bars 10mm dia and over cut to length, bent to shape required including cracking, bending spirally or hooping for columns hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

Material and labour reinforcement TMT bars 5mm dia and over up to and including 10mm dia in stirrups, spacers and binders, cut to lengh, bent to shape required including cracking bending spirally or hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

Formwork to sides of concrete foundations, footings bases of columns raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vetical or to batter on flat suface, rough finished complete all as specified and directed.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions, complete all as specified and directed.

M&L for RCC 1:2:4 type B-1 nominal mix using 20mm graded crushed stone aggregate for foundations, including rafts, footings, foundation beams plinth beams bases for columns etc basement slabs under-reamed piles and mass concrete complete all as specified and directed.

M&L for RCC 1:2:4 type B-1 nominal mix using 20mm graded crushed stone aggregate as in columns, pillars, piers and struts complete all as specified and directed.

M&L cement concrete type B0 1:2:4 (12.5mm graded stone aggregate) providing in lintles upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railing upto 60cm in height, copings, kneelers, apex stones bed plates, water troughs and the like including weathering sightly rounded or chamfered angles and throating complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats of cement base paint on walls over coate of alkaline resistent printing paint complete all as specified and directed.

M&L for preparation of new steel surface exc 10cm on width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed.

S&F PVC 110mm (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with clamps and for sewage line complete all as specified and directed.

M&L for machine pressed Chequered cement concrete tiles of size 30cm x 30cm x 25mm thick set jointed and jointed in neat cement slurry with grey cement and pigment over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Please Enable Macros to View BoQ information