Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Ref. No.
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹4,000
Closing Date
28 Oct 2022, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Neha Sinha
Power Grid Corporation of India Limited, Plot No. 4, Unit-41, Niladri Vihar, Chandrashekharpur,
Construction of Ladies Toilet for Ladies AMC worker and Gents Toilet at Main Gate at POWERGRID Indravati Sub-Station (Under AM Budget)
ODP/BB/CnM-2907/I-2237/RFx-5006003796/22-23
Limited
Civil Works – General
Works
Indravati
₹4,000
13 Oct 2022
13 Oct 2022
28 Oct 2022
13 Oct 2022
28 Oct 2022
13 Oct 2022
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas of brick work Foundations(exceeding 30cm in depth) including disposal of excavated earth within the premise and lift upto 1.5m, disposed earth to be levelled and neatly dressed,all work complete as per the Instruction of EngineerIn-Charge.- All kinds of oil
Supplying, filling and compacting, CNS Material as per specification under floors, foundations, roads, trenches, drains etc. all complete as per direction of EIC
Providing and laying in position cement concrete of specified grade including the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)all work complete as per the Instruction of Engineer-In-Charge.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level as per the Instruction of Engineer-In-Charge. : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size).
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels,bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering,finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).all work complete as per the Instruction of Engineer-In-Charge
Providing and fixing at or near ground level precast reinforced cement concrete in cover plates etc and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), including the cost of required centering, shuttering complete. 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).(cost of steel shall be paid separately)all work complete as per the Instruction of Engineer-In-Charge.
Brick work with clay flyash F.P.S. (non modular) brick of class designation 7.5 in foundation and upto plinth level in :Cement mortar 1:6 (1 cement : 6 coarse sand) all complete as per direction of Engineer-in-charge
Brick work with clay flyash F.P.S. (non modular) brick of class designation 7.5 in superstructure above plinth level up to floor five level in Cement mortar 1:6 (1 cement : 6 coarse sand) :all work complete as per the Instruction of Engineer-InCharge
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in :cement mortar 1:4 (1 cement : 4 coarse sand)all work complete as per the Instruction of Engineer-In-Charge.
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. in :cement mortar 1:4 (1 cement : 4 coarse sand)all work complete as per the Instruction of Engineer-In-Charge
Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry of Toilet walls.all work complete as per the Instruction of Engineer-In-Charge.
12 mm cement plaster of mix:1:6 (1 cement : 6 fine sand)all work complete as per the Instruction of Engineer-In-Charge.
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, colours shed as approved by Engineerin-Charge, in skirting,risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade ;all work complete as per the Instruction of Engineer-In Charge
Providing and laying Ceramic glazed floor tiles(anti skid) of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make ,colours shed as approved by Engineerin-Charge laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., all work complete as per the Instruction of Engineer-InCharge
Foundations, footings, bases of columns, etc. for mass concrete
Lintels, beams, plinth beams, girders, bressumers and cantilevers
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete as per the Instruction of Engineer-InCharge:Thermo-Mechanically Treated bars(Fe-500D or more)
Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.Two or more coats on new work
12 mm cement plaster finished with a floating coat of neat cement of mix : 1:3 (1 cement: 3 fine sand) all work complete as per the Instruction of Engineer-In- Charge.
Providing & fixing PVC coated weldmesh of min. 1/2" aperture-16 gauge wire to windows, openings etc. With uv sunlight protection.all complete as per instruction of EIC.
Fabricating & Fixing Structural steel work by welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat followed by one or more coat of enamel paint. of approved brand,carriage all complete. all complete as per the Instruction of Engineer-In- Charge.(Structural members only shall be provided by POWERGRID.)
Fixing GI roof sheets using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. all complete as per the Instruction of Engineer-In-Charge.(GI sheets only shall be provided by POWERGRID.)
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe,hose pipe with manually controlled device (handle lever)conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests all complete as per the Instruction of Engineer-In-Charge.
Providing and fixing PTMT bib cock of approved quality and colour.15mm nominal bore, 86 mm long, weighing not less than 88 gms
Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 gms . all complete as per the Instruction of Engineer-In-Charge.
Providing and fixing Finishing Plain PVC Bathroom Door (opening 2.5'X7' sft) as approved quality including necessary tower bolts & door handles both side conforming to IS standards all complete as per the Instruction of Engineer-In-Charge.
Providing and fixing PTMT grating of approved quality and colour. Circular type 100 mm nominal dia. all complete as per the Instruction of Engineer-In-Charge.
Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.all complete as per the Instruction of Engineer-In-Charge.
Providing and fixing Extra Heavy Brass Ball Valve (25 mm) 1"(ISO Certified). All complete as per the Instruction of Engineer-In-Charge.
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design with trenching,backfilling etc all complete. 110 mm dia pipe. all complete as per the Instruction of Engineer-In-Charge.
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints all complete as per the Instruction of Engineer-In-Charge.External work 25mm nominal bore
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints all complete as per the Instruction of Engineer-In-Charge.Exposed on wall 25 mm nominal dia Pipes
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints all complete as per the Instruction of Engineer-In-Charge.Concealed work, including cutting chases and making good the walls etc.20 mm nominal dia Pipes
: Civil Works Package - :
2 or More
JV (Joint Venture)
45 (Forty Five) Days
Average annual turnover (in INR)
Details of Contract & Date
Tentative Completed date
Qualification
Ref/ Page No.
Ref/ Page No.
Ref/ Page No.
Ref/ Page No.
POWER GRID CORPORATION OF INDIA LIMITED,
Section
Clause No./ Page No.
Ref. and Page No.
Ref. and Page No.
Period in weeks (from the effective date of LOA)
Date of Retirement/ resignation from POWERGRID
Date of Retirement/ resignation from POWERGRID
Date of Retirement/ resignation from POWERGRID
45 (Forty Five) Days
Name of the published index
Wholesale Price Index Number for ‘High Speed Diesel’ (Individual commodity) (monthly) (Base: 2004-05=100) as published by Office of Economic Advisor, Ministry of Commerce & Industry (www.eaindustry.nic.in).
Indian Labour Bureau, Shimla, Govt. of India (monthly) (Base: 2001 = 100) (www.labourbureau.nic.in)
Wholesale Price Index Number for ‘Ferrous Metals’ (Group Item) (monthly) (Base: 2004-05=100) as published by Office of Economic Advisor, Ministry of Commerce & Industry (www.eaindustry.nic.in).
Wholesale Price Index Number for High Speed Diesel’ (Individual commodity) (monthly) (Base: 2004-05=100) as published by Office of Economic Advisor, Ministry of Commerce & Industry (www.eaindustry.nic.in).
Indian Labour Bureau, Shimla, Govt. of India (monthly) (Base: 2001 = 100) (www.labourbureau.nic.in)
Wholesale Price Index Number for ‘Cement & Lime’ (Group Item) (monthly) (Base: 2004-05=100) as published by Office of Economic Advisor, Ministry of Commerce & Industry (www.eaindustry.nic.in).
Wholesale Price Index Number for ‘Structural Clay Products’ (Group Item) (monthly) (Base: 2004-05=100) as published by Office of Economic Advisor, Ministry of Commerce & Industry (www.eaindustry.nic.in).
JV (Joint Venture)
FALSE
We have enclosed a Bid Guarantee in original and one copy in the form of Bank Guarantee (Bank Guarantee No.-, dated DD-MM-YYYY issued from ) for a sum of Rupees /-, Valid for a period of Seven [07] calendar months from the date of opening of bids i.e. upto and inclusive of DD-MM-YYYY.
EMD DETAIL FORM
Bank Guarantee No.
Name of Issuing Bank :
Clause No 13.0, ITB, Section -II and cl. 3.0 SCC, Section-IV, Volume-I
Clause No.64.0, Conditions of Contract (GCC) & Clause 11.0, SCC
Clause No.14,Section GCC, Vol.-I ,Conditions of Contract & Clause 12.0 of SCC, Section-IV, Vol-I & Clause 33.0 of ITB, Volume-I
Clause No 10.0 of SCC, Volume-I
Clause No 11.0 of ITB,
Cl.No.45.0 & 46.0 Section. GCC, Vol. I, Conditions of Contract & Clause 8.0 of SCC, Volume- I
Clause No. 9.0 of SCC, Volume -I
Banks certified Cheque
Bank Guarantee
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html
01 Invitation for Bids (IFB)-Section-I.docx
docx • 0.16 MB
02 Instructions to bidders(ITB)-Section-II.docx
docx • 0.23 MB
03 Bid Data Sheets (BDS)-Section-III.doc
doc • 0.25 MB
03A ANNEX-D(BDS)-Undertaking for Authenticity.DOC
doc • 0.05 MB
04 Conditions of Contract Civil Works.pdf
pdf • 0.39 MB
04A GCC Civil Amendments I - IX.pdf
pdf • 1.46 MB
05 SCC-Section-V.docx
docx • 0.10 MB
06 ANNEXURE-I, II ,III & IV of SCC.docx
docx • 0.04 MB
07 ANNEX-D (SCC) SA 8000 2008.pdf
pdf • 0.16 MB
Drawings.pdf
pdf • 1.14 MB
SFQP.pdf
pdf • 1.62 MB
Technical Specification Civil.pdf
pdf • 2.30 MB
Thumbs.db
db • 0.11 MB
Attachment-26 Declaration regarding events encountered pursuant to ITB Clause 2-1.docx
docx • 0.03 MB
Attachment-27.doc
doc • 0.04 MB
Bill of Material.xlsx
xlsx • 0.08 MB
First Envelope and Bid Forms.xlsx
xlsx • 0.65 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .