Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.7 LAccepted-AOC KARAIKAL MUNICIPALITY PUDUCHERRY PY | ₹1.7 L | L1 | Accepted-AOC Lowest |
| 2 | L2₹1.8 L+₹5,910 (3.39%)Rejected-Finance NO 60 MUKKULAM STREET KOTTUCHERRY KARAIKAL | KARAIKAL | KARAIKAL | PUDUCHERRY | ₹1.8 L+₹5,910 (3.39%) | L2 | Rejected-Finance Unsuccessful Tenderer |
| 3 | L3₹1.7 Cr+₹1.6 Cr (9384.2%)Rejected-Finance | ₹1.7 Cr+₹1.6 Cr (9384.2%) | L3 | Rejected-Finance Unsuccessful Tenderer |
Tender Value
₹1.7 L
EMD Value
₹3,324
Closing Date
11 Dec 2023, 3:30 pmClosed
Executive Engineer
The Executive Engineer, Irrigation and Public Health Division, PWD Karaikal
Sw- Providing temporary water supply arrangements at at Night Shelter area, Planetarium, VIP Nagar sellur, Inner ring road, Opposite to CHC Thenoor, Opposite to Guru guest house Thenoor, Iyyanar temple and ONGC Staff Quarters of Thirunallar in Thiru
2023_PWDC3_14413_1
28-03/IPH/TN/2023-24
Open Tender
Water Supply
Item Rate
7 days
Karaikal
Please refer Tender documents.
2 documents required · 2 mandatory
₹525
₹3,324
2 Jan 2024
4 Dec 2023
11 Dec 2023
4 Dec 2023
11 Dec 2023
4 Dec 2023
Amount
Earth work in excavation by mechanical means (Hydraulic excavation) / manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10sqm on plan) including getting out and disposal of excavated earth, lead upto 50m and lift upto 1.5m - all kinds of soil
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within lead of 50 m - all kinds of soil - pipes,cables etc , not exceeding 80mm dia
Providing flanged joints to double flanged C.I./D.I. pipes and specials including necessary bolts, nuts, rubber insertion and testing of joints etc.,complete - 100mm diameter pipe.
Providing and fixing Cast iron flanges conforming to IS specification 1538 and ISI marked. - 100 mm dia.
Providing, laying and jointing UPVC pipes(Finolex / jain / Supreme / Truebore Nandi) (0.6 Mpa)conforming to IS specification 4985 and ISI marked including transportation to the site , lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment,including cost of solvent cement,excluding UPVC specials such as bends,tees, threaded pieces,couplers, reducer, endcaps etc.,complete all as per IS and CPWD specification. - 90mm dia.
Providing, laying and jointing UPVC pipes (Finolex / jain / Supreme / Truebore / Nandi) (1 Mpa)conforming to IS specification 4985 and ISI marked including transportation to the site , lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment,including cost of solvent cement,UPVC specials such as bends,tees, threaded pieces,couplers,reducer,endcaps etc.,complete all as per IS and CPWD specification. - 25mm dia.
Providing, laying and jointing UPVC pipes(Finolex / jain / Supreme / Truebore / Nandi) (0.6 Mpa)conforming to IS specification 4985 and ISI marked including transportation to the site , lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment,including cost of solvent cement,UPVC specials such as bends,tees, threaded pieces,couplers,reducer,endcaps etc.,complete all as per IS and CPWD specification. - 63mm dia.
Providing and fixing in position UPVC moulded plain coupler (Finolex / jain)(0.6 Mpa) conforming to IS 7834 part II and ISI marked,including labour charges for jointing, jointing materials etc,complete - 110mm dia
Providing and fixing in position UPVC moulded tail piece without flange(Finolex / jain) (0.6 Mpa)conforming to IS 7834 part II and ISI marked,including labour charges for jointing, jointing materials etc,complete - 110mm dia
Providing and fixing in position UPVC moulded saddle set (Finolex / jain)(0.6 Mpa) conforming to IS 7834 part Il and lSI marked, including labour charges for jointing, jointing materials etc,complete 63 x 25mm dia
Providing and fixing in position UPVC rnoulded saddle set (Finolex / jain)(0.6 Mpa) conforming to IS 7834 part Il and ISI marked, including labour charges for jointing, jointing materials etc,complete - 110 x 25mm dia
Providing and fixing PTMT stop cock of approved quality and colour - 20 mm nominal bore , 89mm long, weighing not less than 88 gms
Providing and fixing in position UPVC moulded unequal Tee (Finolex / jain)(0.6 Mpa) conforming to IS 7834 part II and ISI marked,including labour charges for jointing, jointing materials etc,complete - 110 x 63mm dia
SWAMINATHAN S
K VEERAIYAN
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .