SPECIAL REPAIRS REPLACEMENT OF SHAFT WIRING AND ALLIED WORKS OF LIFT SHAFT AT CERTAIN BUILDING AT NEW NAVY NAGAR UNDER GE NW NAVY NAGAR

Amount

Taking down copper/ aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per condition sepertately) and making good disturbed surfaces of walls, floors etc.

Material and labour for point wiring complete with proper colour coding using, 1100 volts grade, 1.5 Sqmm, PVC insulated FRLS, unsheathed wire with multi stranded copper conductor conforming to IS-694, part-II, ISI marked and including PVC casing and caping not less than 25 mm size, ISI mark with all accessories on wall/ceiling/floor/roof etc, including 1.5 Sqmm, PVC insulated, FRLS, unsheathed, 1100 volts multistranded copper conductor green colour as continuous earth wire connected to common earth dolly all as specified and directed for the following :- NOTE : Circuit conductor from MCB DB to Switch boards should not be less than 2.5sqmm.

One light/Exhaust/Ceiling fan point controlled by one switch.

One 3 pin socket outlet, 5 Amps on the same board with other switches

One 3 pin socket outlet, 5 Amps, on the independent board

All as per item No. 2.0 here in before point wiring confirming to IS-732:1989 but for 16 amps socket complete with 2.5 sqmm single core multi stranded FRLS PVC insulated unsheated copper conductor 1100 volts grade confirming to IS-694:2010 drawn through and including rigid non-metallic PVC medium grade concealed conduit ISI marked with accessories concealed in wall/floor including cutting chases, pining etc including one FRLS PVC insulated and unsheathed multi stranded green colour copper conductor 2.5 sqmm as earth continuity conductor connected to comon earth as earth dolly. Note:- (i) Circuit conductor from MCB DB to Switch boards should not be less than 2.5sqmm. (ii) Separate circuit shall be drawn from MCB. No taping from light circuit. (iii) Modular metal flush box shall be paid separately under relevant items of this schedule. (iii) In colum/beam/ceiling portion surface wiring should be considered with & including suitable size of casing capping as directed by Engineer-in-Charge.

S & F modular switch, 6 Amps , One way, one module , complete all as specified and directed.

S & F modular switch, 16 Amps , One way, one module , complete all as specified and directed.

S & F modular socket, 6 Amps , 2/3 pin combined , two module , complete all as specified and directed.

S & F modular socket, 16 Amps , 6 pin combined , two module , complete all as specified and directed.

S & F ceiling rose surface bakelite with ISI mark , flush type three terminals complete all as specified and directed.

S & F modular stepped type fan regulators 2 module, 120 W, 230 volts complete all as specified and directed.

S & F modular PVC surface box of following modules fixed on wall and making good surface complete all as specified and directed of following sizes:-

3- Module

4- Module

8- Module

S & F modular white cover plate with frame of following modules complete all as specified and directed of following sizes:-

3- Module

4- Module

8- Module

Supply and fixing integrated LED batten 20 Watt, 4 feet long, full white in Engineering plastic battern with white acrylic cover with built in electronic driver, pre-wired and connecting up with twisted twin core flexible copper wire of 0.5 sqmm from ceiling rose to connector of fitting alongwith provision of two Nos of PVC box of size 75x75x20mm for mounting light fittings complete all as specified and directed.

Supply & fixing LED polymer 10 watt bulkhead with opaque polymer diffuser for optimum light output, IP 65 along with integrated electronic driver, pre-wired and connecting up with twisted twin core flexible copper wire of suitable size & length complete all as specified and directed.

S&F in repair MCB DB SPN 8 way suitable for single phase AC supply, 230 V sheet steel powder painted enclosure double door type with minimum IP-43 degree of protection with built in 100 Amps copper bus bar, neutral link and earth link complete including flush off in wall with cutting and making good the disturbed surface including connection of circuits with copper pin terminals complete all as specified and directed. Note :- Blanking plate shall be used for blank places in DB.

S&F MCB SPN, 32 Amp, 10 KA, 230 Volt 'C' curve complete all as specified and directed.

S & F MCB, single pole, 6 to 32 Amp, 10KA, 230Volt, “C” curve complete all as specified and directed.

S & F in replacement with cable PVC insulated, PVC sheathed, armoured, FRLS, 1100V grade, 2 core 6 sqmm stranded copper conductor electric cable laid on wall/ roof/ duct complete with proper saddling and connecting to DBs with glands including taking out existing unserviceable cable complete all as specified.

Taking down old U/S ceiling fan of any size and Make from each machine room & deposit to MES store and Supply and fixing of ceiling fan 230V, 50 Hz, AC, 1200mm sweep, min air delivery 210 CFM with service value 6.00 BEE, five star rated with brushless direct current motor (BLDC) complete with hanging arrangement by down rod alongwith steel wire rope for additional safety in ceiling fan with all allied accessories and connecting up with three core, 0.75 sqmm PVC insulated copper conductor cable complete all as sepecified.

Taking out unserviceable exhaust Fan and deposit to MES Store, supply and replacement with exhaust fan, 4 blade, heavy duty, double ball bearing, 230V, 50Hz, 300mm sweep having power input 70W speed 1440RPM, with protective bird guard including connecting with three core, 0.75 sqmm PVC insulated copper conductor cable complete all as sepecified and directed. Make :- Havells/Crompton/Bajaj/Polycab/Usha.

Taking out unserviceable exhaust Fan and deposit to MES Store, supply and replacement with exhaust fan, 4 blade, heavy duty, double ball bearing, 230V, 50Hz, 400/450mm sweep having power input 70W speed 1440RPM, with protective bird guard including connecting with three core, 0.75 sqmm PVC insulated copper conductor cable complete all as sepecified and directed. Make :- Havells/Crompton/Bajaj/Polycab/Usha.

Taking down deterioted louvers and supply and fix new louvers, fixed type made out of 1.6 mm GI sheet bending into shape of suitable size not less than 45cmx45cm(outer) with horizontal ventilation of size 20x3mm, with flat iron base of suitable size not less than 45cmx45cm complete by providing of fixing arrangement for louvers upto machine rooms of 14th floors buildings all as specified and directed by Engr-in-Charge.

M & L for fabrication of fan hook made out of 12mm dia MS rod suitable for fan hook bend to shape 'S' including 12mm dia SS fastner as required at site and as directed by Engr in Charge.

S S ENTERPRISES (BID ID -3451023)

POOJARANI ELE-TECH (BID ID -3448081)

Genius Construction Co. (BID ID -3449203)

AGRAWAL ASSOCIATES (BID ID -3447880)