BM-47(31)/PUR/2024 (509) Fabrication and Erection of various wooden works

Fabrication & Erection of various Wooden Works

Work Table for Mechanical compliance with drawing no BM/BKNR-1/25

Work Table for Electronics / Electrical strictly compliance with drawing no BM/BKNR-2/25

Workshop Stool compliance with drawing no BM/BKNR-3/25

Conference Room Table compliance with drawing no BM/BKNR-4/25

Partition Wall at Store compliance with drawing no BM/BKNR-5/25

Low height partition & Shoe Rack and other allied work of Taramandal area compliance with drawing no BM/BKNR-6/25

Demonstration Table compliance with drawing no BM/BKNR-7/25

Partition wall at Human Performance Hall with drawing no BM/BKNR-8/25

Reception Desk compliance with drawing no BM/BKNR-9/25

Souvenir Shop compliance with drawing no BM/BKNR-10 /25

Providing and fixing of teakwood frame of Cross Section 2” X 1.5”, in a grid of 2’ X 2’covered with 09mm BWP Ply on one side with 1 mm of approved colour laminates to be pasted above surface .compliance with drawing no BM/BKNR-11 /25 Payment will be made as actual area

Providing and fixing of teakwood frame of Cross Section 2” X 1.5” in a grid of 2’ X 2’, covered with 6 mm BWP Ply on one side with 1 mm of approved colour laminates to be pasted above surface compliance with drawing no BM/BKNR-12 /25 Payment will be made as actual area

Providing and fixing of teakwood frame of Cross Section 2” X 1.5” in a grid of 2’ X 2’, covered with 09mm BWP Ply on one side and 6mm on other with 1 mm of approved colour laminates to be pasted above surface both side compliance with drawing no BM/BKNR-13 /25 Payment will be made as actual area

Fabrication of curved partition, floor mounted/ wall mounted as per the given drawing at site and fixing of same, having frame made of Cross Section 2” X1.5” teakwood vertical member and 19 mm thick X50mm wide BWP ply horizontal curved member in a grid size of 24” X 24” covered on one side with 2 nos of 6mm flexi ply on front surface with 1 mm of approved colour laminates to be pasted above surface one side compliance with drawing no BM/BKNR-14/25 Payment will be made as actual area

Providing and Fixing Glass films for fixing on existing window and aluminium partition glass for reduces the amount of heat and radiation caused by Sun’s rays Make-Garware Sun Control Film-70% Thickness-1 Mil Visible Light Transmittance-70% Charges inclusive of cutting sizing pasting. Payment will be made on actual pasted area.

Providing and applying white cement based putty make-Birla putty/Asian Paints only of average thickness 1 mm, of approved brand and manufacturer, over the wooden surface/ plastered wall surface to prepare the surface even and smooth complete

Painting wood work with Delux Multisurface Paint of Required shade .Two or more coats applied @ 0.90 ltr/10 sqm over and under coat of primer applied @0.75 ltr /10 sqm of approved brand, manufacture and shade.

PEOPLE FUNNITURE (BID ID -3185533)

SATISH KUMAR (BID ID -3185697)