Construction Work of CC Road and Drain with Street Lighting from Vinod Dwivedi House to Kavita Mishra House in Mohalla Shastri Nagar

Dismantling brick work or stone work in lime or cement mortar and including stacking of materials as directed by the Engineer-in-charge within a distance of 60metres.

Earthwork filling by B.C. Soil cartage soil from 5 Km distance by T.T. including lead and lift etc. complete work.

Excavation in foundation in ordinary soil (Loam clay or sand) including lift up to 1.5 meter (5ft) and lead upto 30m (100ft) and including filling, watering & ramming of excavated earth into the trenches or into space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as direction by the Engineer-in-charge upto a distance of 30m( 100ft) from the foundation trenches. SI No 251.

Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401.

Cement concrete with 4cm (1/2") gauge approved stone ballast, approved coarse sand, cement in the proportion 1:4:8 including supply of all materials, labour and tools and plants etc. required for proper completion of the work. SI No. 281

RCC work with cement approved coarse sand and 2cm. (3/4'') gauge approved stone ballast in the proportion 1:1.5:3 in lintels, excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B.W.G.I wire.and including necessary cantering and suttering etc and also including supply of all materials,labour and tools and plants etc. required for proper completion of the work. binding wire to be supplied by the contractor free of cost.

Mild steel or iron in plain work such as R.C.C. / R.B.(when not included in over all rates) wrought to requied sape as necessary including bending for proper completion of the work and including supply of steel , its wastage and hooks and authorised overlapping shall be masaured. SI. No. 504

Site Cleaning

Supply in fixing of stone granite with letter writing in all of comletcition of work.

PhotoGraph

Diversion of house drain

Supply & fixing of 16 mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip, heaving pole sheet thickness 3mm Top dia minimum 150mm Bottom dia 360mm base plate 32mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 to 12 luminaries & its control gear boxes1.5 HP power tool motr 3 point suspension system with steel wire rope 6mm dia double drum winch including making suitable foundation as per manufature drawing/ site reuiment along with foundation bolts nuts, washers, anchor plates etc completee in all respect. SI No 652

Supply and foxing of factory wired integral LED flood light liminaires with die cast aluminium housing built with dirver set sutiable for 170 to 200 watt Confirming to IP 66 protection complete in all respect. SI No 1455

Supply and foxing of factory wired integral LED flood light liminaires with die cast aluminium housing built with dirver set sutiable for 170 to 200 watt Confirming to IP 66 protection complete in all respect. SI No 1455

S/F of Distribution box with02 Nos 15 amp, Kit-Kat Fuse including 1.75 mts long 40mm GI pipe with check nut etc Complete in all respect.

Penting of the electric Pole with to coat of aluminium paint over red oxide primer complete in all respect as per sed. Index No 634

S/F of following capacity of automatic street light cubicle control panel consisting of time switch ISQ 100 series with contractors, HRC fuses, isolating switch metering instrument with Cis etc. in case of IPN complete in all respect As per sed Index No 807 (I)

S/F of six way pole bracket suitable for flod light

Making suitable Earthing. Index No 702

S/F of 2.5mm copper wire 1100v grade from connection box to fitting Index No 1301c

Supply and fixing of 9 mtr G.I. Octagonal pole of approved make (top dia 70 mmh Bottom dia 155 mm & Base plate 16 mm thick) having 3 mm thickness with double arm bracket length of 1 mtr length in 1:2:4 RCC foundation bolt including the cost of foundation excavation & back filling and Required T&P complete in all respect.SOR NO 22.2.5

Making Connection of each ami Street Light in box backelite Sheet suitable Size 1 no. 16Amp MCB , Lug & heavy duty connector by 1.5Sqmm x 3 Core Copper Fix Cable from -i'I:ting Complete in all respect

Supply and fixing of LED street light fitting with mandatory driver set having dia cast aluminium body with toughend glass/ UV stabilized PC covet and lenses suitable for 110 watt to 130 watt and confirming to IP 66 and 1K07 amd above protection having company LOGO Engraved complete in all respect including labour 13200-15600 system lumens High Power LED with lenses 120 Lm/W PF>0.95 THD<10%at full load CRI>70 Potted driver set in Metal housing (Not Cricuttory) phase to phase Protection at 440V & 300V auto cut and re-start feature 4KV internal surge protection with 5 years warrantee SOR NO 23.17 (CAT-AAA)

Supply and Laying of PVC HDPE Pipe 40MM 6Kg/cm2

Supply and Laying of Aluminium Conductor PVC insulated armoured served sheathed cable 1100V grade at a depth of 750mm below ground level over a cushion of 75mm thick sand all around and protected with burnt bricks on sides and on top as directed by Engineer in Chage complete in all respect including excavation and regilling The armouring of the cable shall be property connected with the earth conductor by clamps etc.SOR NO 20a.1 A) 16Sq mm x 4 core SOR NO. 20a.1.9

Supply and Laying of Aluminium Conductor PVC insulated armoured served sheathed cable 1100V grade at a depth of 750mm below ground level over a cushion of 75mm thick sand all around and protected with burnt bricks on sides and on top as directed by Engineer in Chage complete in all respect including excavation and regilling The armouring of the cable shall be property connected with the earth conductor by clamps etc.SOR NO 20a.1 B) 50Sg mm x 3-1/2 core SOR NO. 20a.1.12

S/F of Plain or pin type copper tin plated cable socket(lug) to the cable lead, insulating with tape and making Connection etc, complete in all respect (A)16SqMM

S/F of Plain or pin type copper tin plated cable socket(lug) to the cable lead, insulating with tape and making Connection etc, complete in all respect. (A)50SaMM

Supply & Fixing of 50Sq MM x3.s Core Brass Nickle olated ComDression Gland etc

S/F of 40Amp TPN aUtomatic Street Light cubical control panel painted with anti corrsive alkali and acid proof paint consisting of time switch with contractors HRC Fuses isolatin9 switch metering instrument & instrument Box with CTS ETC

S/F of Laying 25mmx3mm G.I. Stri¡s for Earthing Pwo)Sr. No. 716

Supply Instalation Testing and Commissioning of LT Panel vermin proof floor mounting, M.S. channel base with bottom and Fabricated out of 2.0/1.6mm thick CRCA sheet painted with powder coated paint of shade as per the direction of Engineer-In-Charge after proper sheet treatment process of sheet steel. The Bus Bar of pamel shall be of Electrical grade High Conductive Aluminium alloy of appropriate cross section as per rating The main bus bar shall run throughout the panel of rating as main incomer rating The bus bar shall be supported by non hygroscopic SMC/DMC Bus Bar support which shall be mounted on proper interval to ensure the bare the jerks of short Circuit of 50 KA for panels having ABC as Incomer & 36KA for panels having MCCB Incomers panel shall be constructed in fully Segregated Compartment Design for Each Feeder as per 3b construction Format The panel shall be Completed in all respect as per IS 8623 part 2&3 there shall be Separate Metering Compatment ofr incomer metering and outgoing metering (A) Incoming 200 AMP MCCB -1No and (B) Outgoing 63AMP MCCB-3Nos (i) Cat A Pannel Cubicle Type SOR NO 20.1

Please Enable Macros to View BoQ information