REPAIR AND MAINTENANCE OF JOINERY AND CONNECTED WORKS, ROOF TREATMENT AND CONNECTED B/R WORK ETC AT 7 AFH KANPUR

Amount

Taking down chowkats or frames not exc 1.5 sqm each but with shutters (without taking off shutters from the frame) complete all as specified and directed.

All as per item No 1 but exc 1.5 sqm but n.exc 4sqm each

Taking down shutters of any description exc 1 sqm but n.exc 2 sqm each all as directed.

S & F Flush shutters 30 mm thick solid core construction, with block board core & ply wood pannels commercial type on both sides complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), inimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid or/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.all as specified and directed.

S&F 30 mm thick plain WPC factory made wire mess solid door shutters (conforming as per IS-4020) with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company.The door to be pannened with SS mosquito mesh and XTN alluminium mesh for additional strength and safty purpose. door should be fixed with SS hinges and SS screw. door should be water proof, termite proof, fire retardant and having screw holding capacity complete all as manufacturer's specification & drawings & as directed by Engr -in -charge.

S & F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 600 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately) complete all as specified and directed.

S & F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 600 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately) complete, all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), inimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid or/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.all as specified and directed.

Taking down easing and adjusting wooden shutters of any description n.exc 1 sqm each refixing in same opening, all as specified and as directed.

All as per items 10, here-in-before, but exc 1 sqm and n.exc 2 sqm each refixing in same opening.

S&F GI wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, all as specified and directed.

S&F in repair MS galvanized wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, all as specified and directed.

S&F Butt Hinges medium weight stainless steel 100mm long complete all as specified and directed.

S&F stainless steel sliding door bolts of 250 mm long with hasp and staple(bolt type) and fixing clips of sheets , complete all as specified and directed.

S&Fstainless steel Mild steel sliding door bolts 150 mm, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete all as specified and directed.

S&F in repair 150mm size mild steel door springs complete all as specified and directed.

Hacking out old broken glass (any thickness size quality or description) from wooden frames etc glazed with putty or fixed with beads, all as specified and as directed.

Hacking out old broken glass (any thickness size quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as directed.

S&F 12 mm thick Toughned glass as in hinged doors, partitions, automatic doors , plateform and similar work including cutting to shape, drilling holes & required accessories for fixing complete all as specified and as directed.

S&F sheet glass 3mm thick ordinary quality and glazing with silicon sealant in square n. exc 0.5 Sqm in each pane complete all as directed and directed.

S&F 3mm thick figured glass pin head type and glazing with oil putty in square exec 0.5 Sqm in each pane complete all as specified and as directed.

S&F plain glass 4.80 mm thick exc 0.5 Sqm in each pane complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description exec 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Taking down aluminum shutters including repair for smooth functioning including repair/replacement of aluminum snap beading, glazing clips, rubber neoprene packing of any description exc 2 sqm each and refixing in same opening, all as specified and as directed.

M&L for Mild steel small articles such as flat iron 25x3mm thick for hold fasts etc conforming to Fe 410-0, or 310-0, complete all as specified and as directed.

S&F in repairs butt hinges medium weight stainless steel 100 mm long, complete all as specified and directed.

S&F in repairs Butt hinge medium weight stainless steel steel 75 mm long, complete all as specified and directed.

S&F in repairs aluminium anodized bow handle fabricated type, extruded section of 150mm long, complete all as specified and directed.

S&F in repairs aluminium anodized barrel tower bolt of extruded section 200 mm long complete all as specified and directed.

S&F in repair Aluminum anodized sliding door bolts of 250mm long with hasp and staple (bolt type) and fixing clips of sheets ,cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

S&F in repair Aluminum anodized sliding door bolts of 200 mm long with hasp and staple (bolt type) and fixing clips of sheets ,cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

S&F mortice lock brass 4 levers vertical type, size 100mm, fixed in repairs complete all as specified and directed.

S&F in repair 100 mm over all length of cover plate of floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor, complete all as specified and directed.

S&F in repairs aluminium (die cast) body door closer hydraulically regulated designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed..

S&F in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not other wise provided for complete all as directed.

Dismantling mild steel windows and ventilators of any description complete all as directed.

S&F box type hollow rectangular/square mild steel windows of 2 mm thick tube hinges with MS handle, and MS peg stay, & MS tower bolt complete with glazing bars complete all as specified & directed.

S&F box type hollow rectangular/square mild steel windows of 2 mm thick tube hinges with MS handle, and MS peg stay, & MS tower bolt complete without glazing bars complete all as specified & directed.

S&F steel ventilators with top hung shutters including hinges, steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified.

Taking down aluminum shutters including repair for smooth functioning including repair/replacement of aluminum snap beading, glazing clips, rubber neoprene packing of any description n.exc 1 sqm each and refixing in same opening, all as specified and as directed.

Taking down aluminum shutters including repair for smooth functioning including repair/replacement of aluminum snap beading, glazing clips, rubber neoprene packing of any description exc 1 sqm & n. exe 2 sqm each and refixing in same opening, all as specified and as directed.

Taking down rolling shutter of any size including covering guide, channel etc complete all as specified and directed.

S&F steel rolling shutter without ball bearing as specified including top cover, anchoring rod, hasp and staple and shop coat of primer, erected in position as indicated complete push pull or manual type, thickness of lath 1.25 mm, complete all as specified and directed.

Repair only existing rolling shutters of any thickness making functional of by repairing ball bearing, top cover, anchoring rod roller correcting/straitening of side guide rail etc with and including necessary repairing push, pull or manual type easing rails after greasing complete all as specified and directed Note: Spares such as ball bearings, springs etc will be measured and paid separately as supply only..

Supply only ball bearing for rolling shutter complete all as specified and directed.

Supply only springs for rolling shutter complete all as specified and directed.

M&L for cutting holes into or through cement concrete slabs etc, reinforcement or otherwise for inserting hold fast, superficial area exc 250 Sqcm, not exc 500 Sqcm and 15 cm depth all as directed.

Dismantling asbestos cement (corrugated, semi-corrugated, etc) sheets in roof coverings complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness including Nanital or similar pattern roof covering complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa, AZ 150 as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified & directed.

S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa, AZ 150 as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified & directed.

S&F 1.00 mm thick plain, galvanised mild steel sheeting, in steel gates, ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed.

S&F in repairs fibre glass reinforced translucent corrugated sheeting 2 mm thick with two corrugation side lap fixed with coach screw and washer in roof, wall etc, all as specified and directed.

M&L preparation of new surfaces of steel and iron of any description n.exc 10cm in width or girth when unconnected with other painting and applying two coats of synthetic enamel paint over a coat of red-oxide primer complete all as specified and as directed.

M&L preparation of new surfaces of steel and iron of any description over 10cm in width or girth not otherwise described, and applying two coats of synthetic enamel paint over a coat of red-oxide primer complete all as specified and as directed.

M&L cement concrete 1:3:6 type C1 (20 mm graded aggregate) in benching,hold fast, copings, plinth courses, string courses and the like including weathering, slightly rounded or chamfered angles and throating, as directed.

S & F mild steel work as in main and cross beam, hip and jack rafters, purlins etc. fixed with angle cleat or other connecting plate complete confirming to Fe – 410-O or Fe – 310-O long all as specified and as directed.

S&F in repair 1mm wall thickness stainless steel 202 Gde drapery rod with incl brackets, decorative finials at both ends complete all as specified and directed. (Note : Sample/ design approved by Engineer-in-charge)

S&F in repairs steel window handles fixed with nuts & bolts, screw or welded complete all as specified and directed.

S&F in repairs steel window peg stay with nuts & bolts, screw or welded complete all as specified and directed.

S&F in repairs 2nd class HW plain fillets, square, rectangular in section, clean sawn, secured with nails or brads, sectional area exc 3 & n.exc 6 sqcm, all as specified and directed.

S&Fin repairs 2nd class HW plain fillets, square, rectangular in section, clean sawn, secured with nails or brads, sectional area exc 13 & n.exc 25 sqcm, all as specified and directed.

Dismantling of wall and ceiling/cup boards (fibre, pulp, insulation, etc) or insulation boards/slabs, blankets, any thickness, including cover fillets, fixed in any position complete all as specified and directed.

S&F Solid PVC Wall panneling consisting of 5mm thick of wood grains PVC sheet including of solvent cement and including fixing to walls on PVC frame including cover all joints with pvc cover fillets complete all as specified and directed.

S&F 30 mm wide continuous (piano) hinges, stainless steel, bright finish or electrogalvanised, complete all as specified and directed.

Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) With semi perforated false ceiling tiles of Size 595 x 595 mm of approved texture, 12mm thick micro tegular design and patterns having moisture micro tegular edged or 1 0 mm content less than 2%, humidity resistance edged GRG thick square edged of 99%, NRC0.50 to 0.75 as per IS false ceiling GRG false ceiling 8225:1987, Noncombustible as per BS tiles tiles 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main- T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threadedhanger rod upto 1 OOOmm length and Lshape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.

S & F powder coated(Thickness or powder coating not less than 50 micron) alluminium door shutters with frame of section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, disc type handle 2 Nos in each door, hinges, anodised aluminium snap beading, screws, sliding bolt, tower bolt & door stopper etc excluding glass & prelaminated board including taking down complete all as specified.

S & F powder coated(Thickness or powder coating not less than 50 micron) alluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 Kg/m including necessary joining,cleats, rubber packing, anodised aluminium snap beading, screws, handle & tower bolt etc & excluding glass including taking down complete all as specified.

Supply and fixing in repairs powder coated aluminium grill to windows/ventilators including aluminium 'F' Channel 20 x 20 x 2 mm mm thick, fixed all round of grill complete all as specified and directed.

Supply and fixing in repairs 4.8 mm thick sheet glass, exc 0.50 Sqm in each pane, fixed to aluminium frame work with necessary glazing cips/rubber packeng/gasket screws etc complete all as specifed and as directed.

S&F pre-laminated particle board, 12mm thick interior grade, prelaminated both sides with decorative choice laminations fixed with screws of any position complete, all as specified.

S&F 75 mm long fancy type metallic handle with wooden finish to match with decorative lamination complete all as specified and directed.

S&F magnetic catcher as per sample approved by GE, complete all as directed.

S&F rubber beading 75mm wide fixing with nail/screw, complete all as specified and directed.

Taking down uPVC/PVC/Alluminium chowkats or frames exc 1.0 sqm but n.exe 4.0 Sqm each with shutters (without taking off shutters from the frame), all as directed.

Providing and fixing factory made uPVC white colour sliding windows, area nexc 2.00 Sqm each three track made of extruded profiles with wall thickness of 2.3 mm (plus or minus 0.2 mm). Window profile with hollow sections with multi chamber, frame (88 mm x 52 mm), sliding sash (42 mm x 67 mm), sliding mesh sash (42 mm x 57 mm), sliding interlock (One vertical lenght in each shutters) (45m5 mm x 28 mm), glazing bead (24.5 mm x 16 mm) will be mitered cut and fusion welded at all fusion welded at all corners, including railing of holes for fixing of hardware and drainage of water etc, making arrangement for fixing of hardware, EPDM gasket, 1.2 plus or minius mm thick galvanized steel frame (30 mm x 18 mm) 2 Nos, sliding sash (30 mm x 18 mm), sliding mesh sash (26 mm x 10 mm), profile to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100 mm long fasterners. Hardware : Touch lock of zinc alloyed (white powder coated), steel roller system, stainless wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and required accessories) (Note : The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpuse).

Providing and fixing factory made uPVC white colour sliding windows, area exc 2.00 Sqm each three track made of extruded profiles with wall thickness of 2.3 mm (plus or minus 0.2 mm). Window profile with hollow sections with multi chamber, frame (88 mm x 52 mm), sliding sash (42 mm x 67 mm), sliding mesh sash (42 mm x 57 mm), sliding interlock (One vertical lenght in each shutters) (45m5 mm x 28 mm), glazing bead (24.5 mm x 16 mm) will be mitered cut and fusion welded at all fusion welded at all corners, including railing of holes for fixing of hardware and drainage of water etc, making arrangement for fixing of hardware, EPDM gasket, 1.2 plus or minius mm thick galvanized steel frame (30 mm x 18 mm) 2 Nos, sliding sash (30 mm x 18 mm), sliding mesh sash (26 mm x 10 mm), profile to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100 mm long fasterners. Hardware : Touch lock of zinc alloyed (white powder coated), steel roller system, stainless wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and required accessories) (Note : The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpuse).

S & F in repairs 18 mm thick 100% Lead free one side plain other side laminated WPC sheet of approved colour for kitchen cabinet shutters, shelves and shutters for cup board or similar use and required bracket etc. complete all as specified and directed.

S & F in repairs 6 mm thick 100% Lead free one side plain other side laminated WPC sheet of approved colour for kitchen cabinet shutters, shelves and shutters for cup board or similar use and required bracket etc. complete all as specified and directed.

S & F in repair Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and as directed.

S&F in repair runners 45 mm Telescopic (KTS-20) for SS wire basket full extension load capacity 50 kgs, Make :Hexa, Shreeji, Hafele

S&F in repair stainless steel handles 100 mm size for kitchen cabinet shutters complete all as specified and directed.

S&F in repair chrome plated stainless steel wire basket (storage basket) pull out type for large utensils, size 795 x 500 x 150 mm with necessary fixing clips etc. complete in all respect as specified and as directed by engineer- in – charge.Make :Hettich, Hafele, Butterfly

S&F in repair chrome plated stainless steel wire basket (cup and saucer basket) pull out type, size 530 x 500 x 100 mm with necessary fixing clips etc. complete in all respect as specified and as directed by engineer- in – charge.Make :Hettich, Hafele, Butterfly

S&F in repair chrome plated stainless steel wire basket (plate basket) pull out type, size 530 x 500 x 100 mm with necessary fixing clips etc. complete in all respect as specified and as directed by engineer- in – charge.Make :Hettich, Hafele, Butterfly

S&F in repair chrome plated stainless steel wire basket (Thali basket) pull out type, size 530 x 500 x 200 mm with necessary fixing clips etc. complete in all respect as specified and as directed by engineer- in – charge.

S&F in repair chrome plated stainless steel wire basket (cutlery basket) pull out type, size 380 x 500 x 100 mm with necessary fixing clips etc. complete in all respect as specified and as directed by engineer- in – charge. Make : Hettich, Hafele, Butterfly

S&F in repair chrome plated stainless steel wire basket (Grain Trolley) pull out type, size 380 x 500 x 200 mm with necessary sliding frame structure, fixing clips etc. complete in all respect as specified and as directed by engineer- in - charge. Make : Hettich, Hafele, Butterfly

S&F in repair chrome plated stainless steel wire basket (storage basket) pull out type, size 530 x 500 x 100 mm with necessary fixing clips etc. complete in all respect as specified and as directed by engineer- in – charge. Make : Hettich, Hafele, Butterfly

S&F in repair stainless steel pegs set of 6 pegs fixed in wall with Stainless screw etc. complete all as specified and directed.

S&F in repair chrome plated stainless steel wire basket (Bottle pull out) pull out type, size 120 x 500 x 432 mm with necessary sliding frame structure, fixing clips etc. complete in all respect as specified and as directed by engineer- in – charge.” Make : Hettich, Hafele, Butterfly

S&F in repair door bottom seal with alluminium strip and rubber of size 900mmx40mm fixed with Stainless screw etc. complete all as specified and directed.

S&F powder coated aluminium anodised partition with frame, (fixed type) shutter, and glazing 4.8 mm thick plain glass, and 12mm thick prelaminated particle board interior grade/ 5 mm thick ACP sheet (as directed by GE) in bottom panell, glass fixed with rubber gasket with aluminium glazing clips & snap beading including taking down old partition of following sizes;- Frame:- wieght of alluminium section not less than 0.55 Kg/RM Complete all as specified and directed by the Engr in charge

S & F in repair roller blinds opening style vertical foldable, 2 to 3 mm thick of approved colour & suitable size as per site, fixed as per manufacturer instructions complete all as specified and directed.

Material & Labour in repairs for providing and fixing stainless steel (Grade 304) railing made of hollow tubes,channels, plates etc., including welding, grinding,buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing/grab bars etc with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc.in required size,shape on walls or on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed

S & F in repairs office sign board with iron frame work for ACP board and stainless steel letters including all connected accessories complete all as spfd and directed. Note:- size of sign board will be 3000 mmrX 600 mm X 150mm & letter size will be 300 mm (hight) X 50 mm (width) X 5 mm (thick) complete all as specified and directed.

S& F in repairs microwave motion sensor high sensitivity, wide range eagle type, with least interface with industrial noise for active & presence detector with infrared lens for glass doors complete all as spfd and directed. Make - Ozone & Model no.:- OZOM-AC-11-ZS or equivalent.

S&F in repairs aluminium anodized disc shape handle 120 mm dia of disc, fixed with four screw for alluminium doors complete all as directed.

S & F in repair 100 mm long stainless steel double action, heavy duty, self closing hinge withh SS screw complete all as specified and directed.

Taking down existing roof treatment of any description including cement plaster on concrete surface of roof slab including, including dismantling of PCC tiles (if any) , including cleaning by picking sweeping and washing down with water to remove dust complete all as specified and directed.

M&L water proofing treatment on existing cleaned RCC roof comprising with the following operation and as specified here-in-below:- ACCESSIBLE ROOF (a)Rendering 10mm thick in Cement Mortar 1:4 on cleaned Concrete surfaces of Roof, finished fair surfaces including curing of plastered surfaces for 7 DAYS by pounding of Water over the Roof (Levelling Course).b) Applying evenly one Coat of Cold Bituminous Primer T 10 polymerised primer oil based coat conforming to IS-3384-1986, @ 0.30 liter per sqm on the Cleaned Plastered Surfaces.c)S&F standard APP modified membrane prefabricated 5 layer 3mm thick with non woven polyster matt centeral core of 160 gsm (mini) impregrnated and coated on both sides with layers of APP modified bitumen and finised with micro perforatted heat fusiable polythane film on both surfaces .the weight of menmbrane shall not be less than 3.5kg/sqm and laid over primed surface by LPG/ butane torch, all as per manufacturers instructions.

S&F 20mm trhick hydraulically pressed cement tiles laid over 15mm thick cement screed 1:6 mixed with water proofing compound and jointed with CM (1:3) mixed with 5% crude oil by weight of cement over APP Membrane.

M&L water proofing treatment on existing cleaned RCC roof comprising with the following operation and as specified here-in-below:- NON Accessible roof (a) Rendering 10mm thick in Cement Mortar 1:4 on cleaned Concrete surfaces of Roof, finished fair surfaces including curing of plastered surfaces for 7 DAYS by pounding of Water over the Roof (Levelling Course (b) Applying evenly one Coat of Cold Bituminous Primer T 10 polymerised primer oil based coat conforming to IS-3384-1986, @ 0.30 liter per sqm on the Cleaned Plastered Surfaces.( c) S&F standard APP modified membrane prefabricated 5 layer 3mm thick with non woven polyster matt centeral core of 160 gsm (mini) impregrnated and coated on both sides with layers of APP modified bitumen and finised with micro perforatted heat fusiable polythane film on both surfaces .the weight of menmbrane shall not be less than 3.5kg/sqm and laid over primed surface by LPG/ butane torch, all as per manufacturers instructions. (d)Two coats of aluminium paint on top of APP modified membrane all a directed and specified

Taking up or down 15 mm bore steel tubing and connections,including cleaning for refixing or removal to store complete all as directed by Eing-in-Charge.

S&F 15 mm bore tubes medium grade galvanized with all fitting and fixed complete to walls and ceilings or laid in floors of any length , complete all as specified and directed

Taking up or down 20 mm bore steel tubing and connections,including cleaning for refixing or removal to store complete all as directed by Eing-in-Charge.

S&F 20mm bore tubes medium grade galvanized with all fitting and fixed complete to walls and ceilings or laid in floors of any length , complete all as specified and directed

Taking up or down 25 mm bore steel tubing and connections,including cleaning for refixing or removal to store complete all as directed by Eing-in-Charge.

S&F 25mm bore tubes medium grade galvanized with all fitting and fixed complete to walls and ceilings or laid in floors of any length , complete all as specified and directed

S&F in repairs Gun-metal, globe or gate valves of 15 mm dia, with iron wheel head, screwed both ends for iron pipe and fixed

S&F in repairs Gun-metal, globe or gate valves of 20mm dia, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Demolition of cement concrte in ground floor and paving not exceeding 15cm thick (below or above ground level) complete all as directed by Engineer-in-Charge.

S&F in repairs Gun-metal, globe or gate valves of 25 mm dia, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Providing, type B1 1:2:4 (20mm graded aggregate) 40mm thick cement concrete in as platform, padding, roof kerbs or mud stops, rounded or chamfered on edges all as specified and directed.

M & L for providing cement concrete in type Type B0 1:2:4 (12.5 mm graded agg)as in coping, benching and rounded or chamfered on edges on roof and similar work including necessary form work completed all as specified and directed.

M& L repair to chajja area n exc 2 sqm each including plaster in CM(1:3) or PCC type B0 (1:2:4) (using 12.5 mm stone aggregate) on top with WPC,benching/haunching,repair to broken plaster with dubbing coat complete all as specified and directed.

M& L repair to chajja area exc 2 Sqm and n exc 4 sqm each including dismantling of upward facia,cutting of reinforcement , plaster in CM(1:3) or PCC type B 0(1:2:4) (using 12.5 mm stone aggregate) on top with WPC, benching/haunching, repair to broken plaster with dubbing coat complete all as specified and directed.

M&L for repairing of damaged portion of mouth at terrace / roof surface of rain water pipe by cleaning and repairing to mouth of RWP by using CM (1:3) with mix with liquid WPC & sealed with 85/25 hot blown grade bitumen complete to make joint of rain water pipe and roof surface fully leak proof complete all as specified and directed

M&L cleaning of roofs by getting out growing vegetations / grass & brooming down with removing it out of MD land premises of including repairing to damaged surface of roof by using CM (1:3) with mixed with 3% WPC & sealed with 85/25 hot blown grade bitumen complete in patch not exceeding 2.0 Sqm each complete all as specified and directed.

M&L for 75 mm thick cement concrete (1:3:6) type C-2, using 40 mm graded stone aggregate as in plinth protection etc complete including finishing even & smooth without using extra cement, all as specified and directed.

Demolition of brick work built in cement or cement lime mortar including all quoins, arches, pillars complete all as specified as directed.

M & L brickwork with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified

Taking down cement plaster on bricks or stone walls etc., including raking out joints, hacking for key scrubbing down with water etc complete all as directed.

M&L for rendering 15 mm thick on fair faces of brick or stone masonary in CM (1:4) finished fair and even without using extra cement complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick or stone masonary in CM (1:6) finished fair and even without using extra cement complete all as specified and as directed.

M&L rendering 10 mm thick on fair faces of brick work/ concrete on ceiling surfaces in CM 1:3, finished fair & even without using extra cement.

M&L for preparation of new undecorated surfaces of walls and applying two coat of distemper oil emulsion over a coat of chalk primer all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats of cement based paint over one coat of primer on walls all as specified and directed.

M&L for preparation of new plastered surfaces and applying three coats of white wash on ceilings, all as specified and directed.

Taking up asbestos cement pressure pipes, 100/75 mm (including all fittings), including disconnecting pipes and fittings complete all as specified and directed.

S&F PVC (SWR) pipe, 110 mm dia, single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

All as per item No 133 here-in-before but 75 mm dia.

S&F PVC (SWR) bends 110 mm dia complete all as specified and directed.

All as per item No 135 here-in-before but 75 mm dia.

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc exc 250 & n.exc 500 liters of capacity complete all as directed. Note :- Date of cleaning shall be written on tanks by using stencil letters with 10 cm high from synthetic enamel paint.

Petty repairs to leaking water in bib taps, pillar taps stop cock, angle valve, PVC connection waste pipes, float valves, concealed stop cock, GI pipe joints bottle traps etc of any description by changing the washers etc or any other minor accessories to make the system functional complete all as specified and directed by Engr-in-charge.

Taking down of MS gate of any description and refixing in same position/location after necessary repairs such as welding of any type of section, MS sheet, cutting of brick/concrete work including PCC type B-1, 1:2:4 (using 20 mm grades aggregate, complete all as specified and directed by Engr-in-Charge.

S&F 1.00 mm thick plain, galvanised mild steel sheeting, in steel gates, ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed.

All as per item No 140 here-in-before above but except sheeting.

S&F Rotational moulded polyethylene(triple layer white) water storage tanks 500 Ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of water tank and remove from site complete all as specified and directed.

S&F Rotational moulded polyethylene (triple layer white) water storage tanks 1000 Ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of water tank and remove from site.complete all as specified and directed.

S&F Rotational moulded polyethylene (triple layer white) water storage tanks 2000 Ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of water tank and remove from site.complete all as specified and directed.

Demolition of reinforcement cement concrte of any description and in position not otherwise specialy provided complete all as directed by Engineer-in-Charge.

S&F mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 including necessary welding, drilling hole complete.

S&F in repair 20 mm bore GI tank nipple for PVC tanks connection complete all as specified & directed.

S&F in repair 25 mm bore GI tank nipple for PVC tanks connection complete all as specified & directed.

S & F in repair 10 litre capacity PVC low level cistern ‘ white’ with inlet, float valve including bracket with 32 mm dia PVC pipe 600 mm long complete all as specified and directed.

S&F in repair pillar taps, brass, with capston heads, fancy type chromium plated, screwed down high pressure with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed.

S&F in repair brass chromium plated ovehead shower with shower arm complete all as specified and directed.

S & F in repair 15 mm dia bore chromium plated concealed stop cock, complete all as specified and directed.

S&F in repair 15 mm bore Angle cock/stop valves, cast copper alloy, fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and complete all as specified and directed.

S&F in repair 15mm bore Bib taps long body, cast copper alloy fancy type chromium plated with hand elbow operated handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair soap dish, brass, chromium plated, fixed to wall with rawl plugs and chromium plated screws complete all as specified and directed.

S&F in repair sheet glass shelf assembly consisting of 5.5mm thicksheet glassshelf with chromium plated guard and railing complete all as specified and directed.

S & F in repair stainless steel grating round 100 mm size complete all as specified and directed.

S&F in repairs brass chromium plated towel rail 600 mm long between flanges complete all as specified and directed.

S & F in repair 15 mm dia CP brass centre hole basin mixer with accessories in wash basin for mixing hot and cold water, screwed down for 15 mm dia bore GI Pipe complete all as specified and directed.

S & F in repair vitreous china squatting pan Orissa Pattern, size 580 x 440mm white with integral foot rest including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor complete all as specified and directed.

M&L Vitreous China Wash down Water Closet Pan (Pedestal Pattern) White including fixing Bolts (excluding Flushing Cistern and Flushing Pipe) with Plastic Water Closet Seat, Black, Closed Pattern with Recessed Bottom and Cover including fixed-in-repairs, including Making Good disturbed Surfaces with Cement Mortar 1:3, complete all as specified and as directed.

S&F in repair padestal for Wash basin, vitreous China requisite size complete all as specified and directed by engr- in charge .

S&F in repair 550x400mm Wash basin, vitreous China (Flat back) including fixing and pinning in ends of brackets including brass waste coupling of requisite size and waste pipe complete all as specified and directed.

S&F in repair 550x400mm Wash basin, vitreous China counter top including fixing and pinning in ends of brackets including brass waste coupling of requisite size and waste pipe complete all as specified and directed.

S&F in repair mirror cabinet of size 446x505x125 mm, decorative type PVC frame, fixed with PVC rawal plug with CP brackets screw fixed, complete all as specified and directed.

S&F in repair looking mirror 450x600MM mounted on decorative type PVC frame fixed with PVC rawal plug with CP brackets screw fixed, complete all as specified and directed.

S&F in repair fancy type Bib taps of PTMT any colour high pressure screwed for iron pipe and fixed (min weight 15 mm-105 gms) complete all as specified and directed

S&F in repair fancy type Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed (min weight 15 mm-120 gms) complete all as specified and directed.

S&F in repair angle valve of PTMT any colour high pressure screwed for iron pipe and fixed (min weight 15 mm-90 gms) complete all as specified and directed.

S & F in repair PVC waste pipe flexible type 32 mm dia with coupler complete all as specified and directed .

S & F in repair PVC waste pipe for urinal flexible type with 50 mm dia coupler complete all as specified and directed .

S&F in repair half stall china urinals (wall type) complete incl plugs, bedding urinal to plugs with and incl 60 mm long screws, pointing around urinal back in cement and waste pipe etc complete all as specified and directed by Engineer in Charge. Make : - Jaquar/URS-WHT-13261 size 355x 310 x 535 mm/Hindware vinenzia Cat Part No 60023 size 31.5 x 34.5 x 66 cm/Parryware Cat Part No Aquaseal and neutral size 360 x 345 x 565

S&F in repair Plastic Water Closet seat cover,white, closed pattern with flat bottom, and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repair Plastic cover for 500 & 1000 ltr PVC Water tanks fixed with screws/ thread type as per site requirement complete all as specified and directed.

S&F in repair Plastic cover for 2000 ltr PVC Water tanks fixed with screws/ thread type as per site requirement complete all as specified and directed.

Khalil Ahmed and Sons (BID ID -3185505)