REPAIRS TO PAVED AREA APPROACH PATH HARD STANDING DRAINS GATES MASONARY AND ALLIED WORKS AT MTRDC ALISDA CEPTAM AND DCA COMPLEX UNDER AGE B R I OF GE I R an D WEST BANGALORE

Amount

Demolition of PCC in ground floors & pavings n exc 15 cm thickness (below or above ground level) (unreinforced) and removing debris to outside MD land.

Demolition of brick work or stone/ boulder masonry, PCC block masonry built in cement mortar including all quoins, pillars etc., separation of serviceable materials from the unserviceable, stacking the serviceable materials within 100 M and disposal of unserviceable materials, debris and rubbish to outside MD land

Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for, separation of serviceable materials from the unserviceable, stacking the serviceable materials within 100 M and disposal of unserviceable materials, debris and rubbish to outside MD land

Taking down cement plaster on brick or stone wall etc incl raking out joints hacking for key scrubbing down with water complete all as specifed and directed.

M&L for PCC 1:3:6 type C2,using 40mm graded stone aggregates as in surface channels and drains etc complete all as specified and directed.

M&L for PCC in foundations, filling and mass-concrete type D2 (1:4:8) using 40 mm graded stone aggregate etc complete all as specified and directed.

M&L for Random rubble walling, uncoursed, well bonded, bedded and solidly hearted built in CM (1:6) except stone etc complete all as specified and directed.

M&L for Random rubble walling, uncoursed, well bonded, bedded and solidly hearted built in CM (1:6) etc complete all as specified and directed.

M&L for Flush pointing to random rubble masonry, uncoursed or brought upto courses in CM (1:3) complete all as specified and directed.

M&L for Plain Cement Concrete Type B0 1:2:4 (using 12.5 mm graded stone aggregate) copings, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating as directed including use and waste of form work etc complete all as specified and directed.

M&L for Precast cement concrete 1:3:6 type C1 (Using 20 mm graded stone aggregate) block masonry with solid blocks, exceeding 10 cm in width and setting in cement mortar 1:6 etc complete all as specified and directed.

M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:4) and finishing the surface even and smooth etc complete all as specified and directed.

M&L for Plain Cement Concrete Type B0 1:2:4 (using 12.5 mm graded stone aggregate) copings, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating as directed including use and waste of form work etc complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc.complete all as specified and directed.

Add or deduct on item No. 14 above for each 25 mm girth or part thereof over or under 30cm

Removal of silt, leaves, vegetation from drains of any de[th and width including taking out cover slabs of any thickness and placing back and making good the finishes and removal of sludge outside MD land complete all as specified and directed.

M&L for Precast cement concrete 1:2:4, type B1 (Using 20 mm graded stone aggregate) in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:4 etc complete all as specified and directed.

M&L for Mild steel TMT bars 6 to 8mm dia & over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality etc complete all as specified and directed.

M&L for 100mm thick PCC (1:2:4) type B-2, using 40mm graded stone aggregate as in hard standing etc complete all as specified and directed.

Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade 'A' complete all as specified and directed.

M&L for providing precast cement concrete of type C1, 1:3:6 using 20mm graded aggregate in kerbs including weathering, slightly rounded or chamfered angles and throating all as specified and directed.

M&L Applying two coat of synthetic enamel paint over a coat of primer on brick, stone, concrete, asbestos cement or plaster surface of any description over 10cm girth or width, not otherwise described including preparation of new surface complete all as specified and directed.

M&L Applying one coat of synthetic enamel paint on brick, stone, concrete, asbestos cement or plaster surface of any description over 10cm girth or width, not otherwise described including preparation of old surface complete all as specified and directed.

Painting lines, dashes, arrows, letters, etc., on roads, pavements and the like exc. 10 cm wide with Retro-Reflective Thermoplastic road marking paint, white or golden yellow, conforming to MORT&H specification all as per manufacturer's specification and directed.

Demolition of Stone slabs & tiles of any description or thickness in floors, aprons etc. Laid dry or laid dry & pointed and removal of debris outside MD land etc complete all as specified and directed.

Demolition of Stone slabs & tiles of any description or thickness in floors, aprons etc. Laid, bedded & pointed in any mortar and removal of debris outside MD land etc complete all as specified and directed.

M & L for sand filling under floors or in foundation including watering & consolidation complete all as specified and directed.

M & L for rubber moulded Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658 - 2006 of 60 mm thickness, M - 35 Grade with grey cement and no pigment. complete all as specified and directed.

M&L rubber moulded chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed & pointed in neat cement slurry in floors with grey cement & pigment including Screed bed or bedding layer of cement mortar 1:4, 15 mm thick for laying floor finishes complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks & similar work conforming to Fe 290-0 Gde E-165 complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface over a coat of red oxide, zinc chrome primer complete all as specified and directed.

Taking down unserviceable convex mirror and supply and fixing 60 cm reflected convex mirror with 130 degree of viewing angle for outdoor (road side) purpose made of polycarbonate, ABS body fixed in position with hood with mounting hardware, complete all as specified and directed. Make : ACE Polymers (India) or equivalent approved make.

.S&F in repair SS tubes, plates, chains, special articles of any size and shape fixed in position as in railings etc., including welding, polishing complete all as specified and directed.

S S BUILDERS

Aditya Associates

Auromirra Enterprises

Vishwas Enterprises

KUZHIKKAL ENTERPRISES

Solar Electricals and Electronics

kamadhenu Electricals