Loading…
New: tenders and results on WhatsApp
New: Find tenders, results and companies on WhatsApp, by text or voice note
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.1 LAccepted-AOC A 63 ELDECO COUNTY PHASE II RAJGARH JHANSI U P 284135 | JHANSI | JHANSI | UTTAR PRADESH | 284135 | L1 | Accepted-AOC Being Lowest Tenderer | |
| 2 | L2₹31.4 L+₹1.4 L (4.76%)Rejected-Finance | L2 | Rejected-Finance Being other than Lowest Tenderer | |
| 3 | L3₹34.4 L+₹4.5 L (14.9%)Rejected-Finance | L3 | Rejected-Finance Being other than Lowest Tenderer | |
| 4 | L4₹35.9 L+₹5.9 L (19.6%)Rejected-Finance | L4 | Rejected-Finance Being other than Lowest Tenderer | |
| 5 | L5₹37.5 L+₹7.5 L (25.0%)Rejected-Finance 25 13 1 AMBEGAON PATHAR PUNE 411046 | PUNE | MAHARASHTRA | 411046 | L5 | Rejected-Finance Being other than Lowest Tenderer |
Tender Value
₹38.5 L
EMD Value
₹76,920
Closing Date
13 Feb 2025, 6:55 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
MAJOR ANIL KUMAR S GE NW KUNJALI
GARRISON ENGINEER NW KUNJALI DR HOMI BHABHA ROAD NAVY NAGAR COLABA MUMBAI 400005
8156 ADDTN ALTN AND SPL REPAIR TO DRAINAGE LINE BETWEEN BUILDING NO PH I PH II PH IV OF WEAPONS DIVISION AT NAVAL DOCKYARD MUMBAI UNDER GE NW KUNJALI
2025_MES_694797_1
8156/E8
Open Tender
Civil Works
Item Rate
180 days
GE (NW) KUNJALI
ALL AS PER TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
Yes
GE (NW) KUNJALI
₹76,920
Yes
9 May 2025
24 Jan 2025
15 Feb 2025
29 Jan 2025
13 Feb 2025
30 Jan 2025
24 Jan 2025 - 29 Jan 2025
Amount
Dismantling wrought iron or mild steel work of any description complete all as specified and directed .
Taking down cement plaster on brick/ surfaces built in cement mortar including raking out joints, bading for key scrubbing down with water etc complete all as specified and directed .
Demolition of plain cement concrete of any description and in any position not other wise specifically provided complete all as specified and directed .
Demolition of reinforced cement concrete of any description and in any position not other wise specifically provided complete all as specified and directed .
Demolition of brick work or stone /boulder masonry built in cement mortar, including all quoins, arches, pillars, etc complete all as specified and directed .
M&L for brick work with sub class 'B' bricks (old Size) straight or curved on plan exc 6 m mean radius and built in CM (1:6) complete all as specified and directed .
M&L 100 mm thick PCC 1:2:4 type B-I using 20mm graded stone aggregates as in floor finished cement concrete surfaces even and smooth using extra cement complete all as specified and directed .
M&L for RCC Type B1 1:2:4 using 20 mm graded stone aggregate slab supported on wall, beam and coulumn, roof, landings, balconies, canopies, deck slabs and in shelves and the like including all necessary form work complete all as specified and directed .
M&L for TMT mild steel bars,10 mm dia and over, cut to length bent to shape required, including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410-S or Fe-410-0 complete all as specified and directed .
All as per item No. 9 above but as in stirrups complete all as specified and directed .
S&F for rolled mild steel Sections of Grade Fe 410-W, (Gde- E-250) quqlity-A, as in post, runners, rafters, purlins, trusses, steps etc fixed with connecting plates including bending, welding etc complete all as specified and directed .
M&L for Rolled mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed .
M&L for plastering in CM 1:4, 20 mm thick in two coats (15 mm under coat plus 5mm finishing coat) finishing the surface seven and fair complete all as specified and directed . (Note:- Water Proofing Chemical shall be measured and paid seperately)
M&L for preparation of newly plastered or un plastered wall surfaces, over 10cm girth, applying two coats of 100% acrylic, weather resistant emlusion over a coat of exterior wall primer complete all as specified and as per manufacturer's instruction complete all as specified and directed .
M&L for preparing New or previously untreated steel surface of any description, over 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide complete all as specified and directed .
M&L PCC 1:2:4 type B1 using (20 mm graded aggregate) as in coping, curbing of edges complete all as specified and directed.
Excavating in trenches, n exc 1.5m wide and n.exc 1.5m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc n exc 10 sqm on plan and n.exc 1.5m in depth and getting out any type of soil complete all as specified and directed .
Removing excavated material & debris exc. 1.50 Km but n exc. 15 Km and depositing where directed, in soil complete all as specified and directed .
Spreading and levelling in layers n exc 25cm thick including well ramming including watering as required complete all as specified and directed .
M&L for PCC 1:3:6 type C2 using (40mm graded stone aggregate) as in foundations, fillings & mass concrete etc complete all as specified and directed .
jalandhara construction (BID ID -3232815)
SR Construction (BID ID -3232745)
RAJU ENTERPRISES (BID ID -3233568)
sai construction (BID ID -3232732)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .