Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹66.2 LAccepted-AOC RZ 55 1ST FLOOR MOHAN NAGAR PANKHA ROAD NEW DELHI 110046 | NEW DELHI | NEW DELHI | DELHI | 110046 | L1 | Accepted-AOC Awarded | |
| 2 | L2₹88.7 L+₹19.3 L (27.7%)Rejected-Finance | L2 | Rejected-Finance Rejected | |
| 3 | L3₹91.2 L+₹21.8 L (31.3%)Rejected-Finance D 662 WZ 1598 R 1 NANGAL RAYA NEW DELHI 110046 | NEW DELHI | NEW DELHI | DELHI | 110046 | L3 | Rejected-Finance Rejected | |
| 4 | L4₹97.7 L+₹28.2 L (40.7%)Rejected-Finance 126 NARANG COLONY JANAK PURI NEW DELHI 110058 | NEW DELHI | NEW DELHI | DELHI | 110058 | L4 | Rejected-Finance Rejected |
Tender Value
₹1 Cr
EMD Value
₹2 L
Closing Date
27 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Subroto Park
GE (AF) Subroto Park c o 56 APO
REPAIRS OF WOODEN JOINERY , SANITARY FITTING AND MISC BR WORKS IN CERTAIN IN OMQ AREA ACCN UNDER AGE BR I OF GE (AF) SUBROTO PARK
2023_MES_591531_2
GE/SP/ TOKEN-08/2023-24
Open Tender
Civil Works
Item Rate
180 days
Subroto Park Delhi Cantt
Please refer Tender documents.
10 documents required · 10 mandatory
₹1,000
GE (AF) Subroto Park
₹2 L
Yes
2 Nov 2023
30 Jun 2023
3 Aug 2023
30 Jun 2023
27 Jul 2023
15 Jul 2023
1 Jul 2023 - 10 Jul 2023
Amount
Demolition of wall and ceiling boards (fiber, pulp, insulation, etc.) or insulation boards/ slabs/ blankets/board fixed in aluminium door or partition, any thickness, including cover fillets & framed work if necessary complete all as specified and directed by Engr-In-Charge.
S&F for 12 mm thick perforated particle board/ tiles for insulation and acoustic purposes of 60x60 cm in size, fixed with nails to timber frame work or with staples on snap grid including frame work complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by the Engineer-in-Charge
M&L for Non-Skid Coloured Ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11sqm but not exceeding 0.18 sqm in floors or dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, incl Screed bed 15 mm thick in CM (1:6) for laying floor finishes/ paths etc., complete all as specified and directed by Engr-In-Charge.
M&L for Coloured Industrial/ Parking tiles 10 mm thick (square/rectangular) area of each tiles exceeding 0.11sqm but not exceeding 0.18 sqm in floors or dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, incl Screed bed 15 mm thick in CM (1:6) for laying floor finishes/ paths etc., complete all as specified and directed by Engr-In-Charge.
M&L for vitrified ceramic tiles 9 to 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match etc over 15 mm th screed in cement mortar 1:6 complete all as specified and directed by Engr-In-Charge.
All as item no. 6 above but in dado/Skirting over 10mm thick rendering in CM 1:4 complete all as specified and directed by Engr-In-Charge.
M&L Glazed printed/ coloured ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm/450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.
M&L for coloured chequered cement concrete tiles 25cm x25cm or 30cmX30cm x22/25 mm thick, set, jointed & pointed in neat cement slurry with grey cement and pigment over 20 mm screed bed in CM (1:6) , demolition of PCC and removing of debris away from MOD land, complete all as specified and as directed by the Engineer-in-Charge
Demolition of concrete of any description and in any position not otherwise specifically provided for. Complete all as specified and directed by Engr-In-Charge.
M & L for 75mm thick PCC 1:3:6 type C-2 (40mm graded stone aggregate) as in plinth protection complete as directed by Engr-in-Charge.
M&L for Machine pressed precast concrete coloured interlocking paver block any shape and size confirming to IS 15658 -2006 of 60 mm thickness M-35 Grade. Complete, with grey cement and pigment all as specified and directed by Engr-In-Charge.
M&L for 75 mm thick Cement concrete type D-2,(1:4:8) (40mm graded aggregate) as in sub floors, sub bases , floors and paving/ paver blocks etc., complete all as specified and directed by Engr-In-Charge.
M&L for fine aggregate (Sand) for cushioning as in interlocking paver blocks laying complete all as specified and directed by Engr-In-Charge.
Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc.laid,bedded and pointed in any mortar complete all as specified and directed by Engr-In-Charge.
M&L for 16-18mm thick Granite ( 'Z' Black or any shade as decided by GE) work (table rubbed and prepolished) for wall on top of platform, bar counter and similar work including cutting polishing rounding on edge etc machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone over and including 15mm thick screed bed in CM 1:4. including grinding and polishing complete all as specified and directed by Engr-In-Charge.
M&L for 16-18mm thick Granite ( 'Z' Black or any shade as decided by GE) work (table rubbed and prepolished) for wall lining (veneering to wall with any height) over 12mm thick rendering in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, cutting polishing rounding on edge etc machine cut, bedded, jointed with grey cement slurry, pointed with white cement with admixture of pigment to match the shade of granite stone and holding with brass screw complete all as specified and directed by Engr-In-Charge.
Taking down chowkats or frames with shutters (with out taking off shutters from the frames) exc 1.5 Sqm but n exc 4 Sqm each, incl removing necessary repair to opening with CM 1:4 complete all as specified and directed by Engr-In-Charge.
Taking down chowkats or frames with shutters (with out taking off shutters from the frames) not exc 1.5 Sqm each , incl removing, and necessary repair to opening with CM 1:4 . Complete all as specified and directed by Engr-In-Charge.
Taking down Door shutter of any description exc. 1.0 Sqm but n exc 2.0 Sqm each complete all as specified and directed.
S&F factory made Solid PVC Door Frames of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification complete all as specified and as directed by the Engineer-in-Charge.
S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rail with suitable PVC sheet beading, & joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and as directed by the Engineer-in-Charge.
S&F Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., size 165x60mm incl frame back filling with PCC 1:3:6 complete all as specified and directed.
M&L mild steel framed work such as in doors/chowkhats or gates of angle or other section with gusset plates, rail, braces etc. complete drilled for fixing of steel sheeting or other covering. Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening & fixing and similar work conforming to Fe-290 grade E-165 complete all as specified, making good disturbed portion to match existing surface complete in all respect as specified.
S&F 5mm thick ACP wall cladding sheet in colour as directed by Engr-in-charge fixed on MS frame size of section 25mmx50mmx3.25 mm. The size of each panel not exc 1.5sqm. MS frame to be fixed on walls, chajja and fasad with Min 08 Nos GI fastener 5" long per 1.5 sqm, including all necessary repairing work as reqd, two coat of synthetic enamel paint over one coat of red oxide primer, including weather sealing sealant, masking tape, including cutting of V groves to fixing moulded ACP sheet self-tapping screw complete all as specified and directed by Engineer-in-Charge. Note:-1.Work to be carried out upto four storey bldg with MS scaffolding not bamboo. 2. MS frame should be fixed on wall after painting.
M&L for PVC profile for wall panelling of size 23cm wide, 8mm over all thick and 01mm wall thickness fixed with screw to mild square tubular steel frame work mad e out of MS Hollow section of size 25mm x 15mm x 2mm spacing 01 meter on both side frame work shall be fixed in wall with the help rawl plug and required length of screws and MS work shall painted with one coat of Red oxide primer for wall panelling, complete all as specified and directed by Engr-In-Charge.
M&L for WPC (Wood Polymer Composite) plank /charcoal plank 3D profile for wall panelling of fixed over PVC board base material, pasting as per manufacture direction to mild square tubular steel frame work mad e out of MS Hollow section of size 25mm x 15mm x 2mm spacing 01 meter on both side frame work shall be fixed in wall with the help rawl plug and required length of screws and MS work shall painted with one coat of Red oxide primer for wall panelling, complete all as specified and directed by Engr-In-Charge.
S & F in 'E' board(Design: LACK & hill) : 605x605x4 mm thick, white pre laminated set embossed reinforced designer ceiling board tiles of approved texture at all height laid on hot dipped galvanized iron imposed grid with 24 mm wide T-section exposed flanges which shall be power coated white. The frame work shall be comprise of main runner made from 0.33 mm thick galvanised steel sheet and of size 24 mm X32mmX300 mm board spaced at 120 mm maximum center to center, hangers of GI wire4 mm dia to be fixed by approved rawal plug level and fasteners and screws etc.,The last hanger at the end of each main runner shall not be greater than 450 mm from adjacent wall , flushing fitting of 1200 mm longer cross tee(with double stitching) to be interlocked between main runners at 600 mm center to center from 1200X600 mm modules cross tee longer than 600 mm to be supported independently . 600mm long cross tee centrally between the 1200 mm cross tee(with double stitching) to be interlocked between main runners at 600 mm center to center from 1200X600 mm modules cross Tee longer than 600 mm to be supported independently . The perimeter wall angle shall be 0.45 mm thick GS sheet of size 19 mm X 19 mm and 300 mm long of white colour all as per manufacturer's instructions complete all as specified and directed by Engr-In-Charge.
S&F for 18-20mm thick exterior wpc wall cladding (Jalli) sheet of medium density in colour white or as directed by Engr-in-charge with computerized cutting as directed, fixed on MS frame 25mm square tube medium grade,. The size of each panel not exc 1.5sqm. MS frame to be fixed on walls, chajja and fasad with GI fastener 5" long per 1.5 sqm, including all necessary repairing work as reqd, two coat of synthetic enamel paint over one coat of red oxide primer, including weather sealing sealant, masking tape, including cutting of V groves to fixing molded PVC sheet with S/S self-tapping screw complete all as specified and directed by Engineer-in-Charge. Note:-1.Work to be carried out up to four story bldg with MS scaffolding not bamboo. 2. MS frame should be fixed on wall after painting complete all as specified and directed by Engr-In-Charge.
M&L for PCC (1:2:4) type B-1 using 20mm graded stone aggregates as in bed blocks, complete all as specified.
S&F 35 mm thick Flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides complete all as specified and directed.
S&F 2nd class HW glazed and Skeleton 35mm thick shutters, open rebated and prepared to receive glass gauze etc (with out sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass. Gauze etc complete all as specified and directed.
M&L for two coats of synthetic enamel paint over a coat of pink primer on new wood surface complete all as specified and directed.
S & F anodised aluminium frame for doors, windows, ventilators, partition work , etc., with one or more rebates including joining cleats for fixing etc. complete all as specified and directed by Engr-In-Charge.
S & F anodised aluminium door shutters of any type , aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified and directed by Engr-In-Charge.
S & F anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified
Supply and fixing 5.5 mm thick ordinary quality sheet glass exe 0.5 sqm in each pane of glazing with oil putty /beading etc all as specified and directed by Engineer-in-Charge.
M&L prelaminated particle board 12mm thick exterior grade prelaminated both side with decorative choice lamination and other side balancing white lamination with screws to timber frame work complete all as specified and directed by Engr-In-Charge.
S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65x100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners not paid for separately). Make: Rajshri/ Sintex/Ecocell Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
S&F factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60(Suspension Grade), 2, 4, or 6 raised panel design calcium carbonate and naturalfibers (wood powder/ rice husk/wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. Make: Rajshri/ Sintex/Ecocell
S&F Butt hinges of size 100mm length, extruded aluminium alloy with galvanised mild steel hinges pin, anodized & fixed, type C-21 complete all as specified and directed by Engr-In-Charge.
S&F 100 mm long butt hinges medium weight cold rolled mild steel alloy with galvanized complete all as specified and directed.
S&F 150mm Aluminium, anodized, barrel tower bolts extruded section. Complete all as specified and directed by Engr-In-Charge.
S&F of 75 mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.
S&F 150mm long extruded aluminium alloy anodised handles fabricated type complete all as specified and as directed by the Engineer-in-Charge.
S&F 100 mm long Aluminium handles, cast type, anodised complete all as specified and directed.
S&F door stopper of aluminium , alloy body and tongue with hard drawn steel spring fixed in floors of 140 mm overall length of cover plate complete all as specified and directed.
S& F in repair Helical door spring 150 mm, ordinary rat tail rod pattern springs including roller and roller plate, fixed including welding/ fixing to steel/ wooden chowkats, complete all as specified.
S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
Taking down old steel /wooden windows with hold fast & making good surface and S&F windows/ ventilators fabricated from 0.60mm thick roll formed section made of galvanised steel powder coated (Base steel as per IS-513"D" quality) galvanised as per IS-277 with ZINC of 120GM/SQM . Windows /ventilators having frame suitable for dual shutter i.e. inner and outer shutter with grill, glazed and wire mess shutter and all fitting, fixtures accessories incl 6mmx12mm flat iron with 10mm square bar M.S. grills complete as specified and shown in drawing No CEAF/STD-191/2014, sheet 1/2 & 2/2 dated 11.12.14 (4000 series). Note :(i) Glazed shutter with 4.00mm thick glass, Mesh shutter with 32 gauge stainless mesh and M.S.grill as per No. 10,11 and 13 of above mentioned drawing deemed to be inclusive in the rate quoted for unit. (ii) Glass, stainless steel mesh will be fixed to window by authorised rep of manufacture of window only.
Taking down old steel /wooden windows with hold fast & making good surface and S&F windows/ ventilators fabricated from 0.60mm thick roll formed section made of galvanised steel powder coated (Base steel as per IS-513"D" quality) galvanised as per IS-277 with ZINC of 120GM/SQM . Windows /ventilators having frame suitable for single shutter with grill, glazed shutter and all fitting, fixtures accessories incl 6mmx12mm flat iron with 10mm square bar M.S. grills complete as specified and shown in drawing No CEAF/STD-191/2014, sheet 1/2 & 2/2 dated 11.12.14(3000 series). Note : (i) Glazed shutter with 4.00mm thick glass, Mesh shutter with 32 gauge stainless mesh and M.S. grill as per No. 10,11 and 13 of above mentioned drawing deemed to be inclusive in the rate quoted for unit. (ii) Glass, stainless steel mesh will be fixed to window by authorised rep of manufacture of window only.
S&F Mortice lock, fancy type, 4 leavers, vertical type, brass body, size 100 mm, all as directed by Engr-in-Charge.
Dismantling water tanks capacity exc 500 ltrs and n. exc. 1000 ltrs & removing to store complete all as specified and as directed by the Engineer-in-Charge.
Dismantling water tanks capacity exc 250 ltrs and n. exc. 500 ltrs & removing to store complete all as specified and as directed by the Engineer-in-Charge.
S&F 1000 ltrs capacity rotational moulded polyethylene water storage tanks (cylindrical or vertical with closed top, white colour) hoisted and fixed in position all as specified in SSR part I. and as directed by the Engineer-in-Charge.
S&F 500 ltrs capacity rotational moulded polyethylene water storage tanks (cylindrical or vertical with closed top, white colour) hoisted and fixed in position all as specified in SSR part I. and as directed by the Engineer-in-Charge.
S&F 20mm bore ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe & fixed.(Minimum weight15mm-142gms / 20mm-210gms / 25mm-455gms / 40mm-690gms) complete all as specified and as directed by the Engineer-in-Charge.
S&F in repairs Gun-metal, glabe or gate valves, with iron wheel head, screwed both ends for iron pipe & fixed dia of bore of pipe 20mm complete all as specified and directed by Engr-In-Charge.
Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc complete all as specified and as directed by the Engineer-in-Charge.
M&L for Brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and as directed by the Engineer-in-Charge.
M&L for Brickwork with sub- class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.
Taking down cement plaster of any description on brick or concrete surfaces of walls or ceiling etc incl. Raking out joints , hacking for key and scrubbing down with water complete all as specified
M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces (Cement plaster 1:6) finished even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge
M&L for 5 mm thick rendering with cement mortar CM 1:3, on concrete surfaces as on ceiling, soffit of stair case, chhajjas facia etc including cement slurry etc finished the surface even and smooth complete all as specified and directed by Engr in Charge.
M/L for preparation of new plastered surface of walls and applying two coats of OBD over chalk whitening complete all as specified and directed.
M&L for preparation of newly plastered or unplaster surface and applying two coats of OBD on ceiling. complete all as specified and directed by Engr in Charge.
S&F in repairs for PVC cover for suitable for existing rotational moulded polyethylene water storage tanks capacity exc. 250 ltrs and n.exc. 500 ltrs (cylindrical vertical with closed top) complete all as directed by Engr-in- Charge.
S&F in repairs for PVC cover for suitable for existing rotational moulded polyethylene water storage tanks capacity exc. 500 ltrs and n.exc. 1000 ltrs (cylindrical vertical with closed top) complete all as directed by Engr-in- Charge.
S&F in repair Wash down water closet (Pedestal pattern), complete , incl provision of cement concrete bedding, CI ‘P’ trap 100mm dia connection to trap and flushing pipe, anti-syphonage complete all as specified and directed by Engineer-in-charge.
S&F in repair vitreous china squatting pan “orrisa” pattern of size 580mmx440mm “white” with integral foot rest (excluding flushing cistern and flush pipe) incl provision of cement concrete bedding, CI ‘P’ trap 100mm dia connection to trap and flushing pipe, anti-syphonage complete all as specified and directed by Engineer-in-charge.
S&F in repair plastic water closet seat cover white closed pattern with flat bottom and cover incl mild steel chromium plated hinging device complete all as specified and as directed by Engineer-in-Charge.
S&F in repairs vitreous china wash hand basin of size 550 mm x 400 mm white, flat back incl angle iron brackets incl waste pipe of 32 mm dia of suitable length, pvc connection of 15 mm dia & 450 mm long with PTMT nuts with 32 mm dia brass chromium plated bottle trap and waste coupling complete all as specified and as directed by Engineer-in-Charge.
S&F in repairs heavy duty Mortice lock, fancy type, 4 to 6 leavers, vertical type, brass body, with push and pull handle, complete all as specified and as directed by Engineer-in-Charge.
S&F in repairs Door closer hydraulically regulated Aluminium (Die cast) body design No-3 universal type, suitable for door shutter of 851 to 1000mm in width and of weight between 61 to 80 Kg and fixed. Complete all as specified and directed by Engr-In-Charge.
S&F in repairs 32mm bore and 75cm long PVC flexible waste pipe for WHB complete all as specified and directed by Engr-In-Charge.
M & L in repairs for 35 mm thick Type B0 (1:2:4) (12.50 mm graded aggregate) set in CM (1:4) Providing precast cement concrete louvres and jallies, including all mouldings and repairing/ finishing/ colouring of disturbed surfaces , complete all as specified and directed by Engr-In-Charge.
S&F in repair two legged aluminium floor door stopper with rubber shoe 140mm long complete all as specified and directed by Engr-In-Charge.
S&F for floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, fixed in floor (140mm size), fixed as in repair complete all as specified and directed.
S&F in repair glass shelf assembly consisting of 5.5 mm thick sheets glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed by Engr-In-Charge.
S&F in repair Corner glass shelf assembly consisting of 5.5 mm thick sheets glass shelf with chromium plated bracket guard and railing complete all as specified and directed by Engr-In-Charge.
S&F steel water tubing, galvanised, medium grade, ISI marked with all fittings and fixed on walls and ceilings or laid in floors bore of pipe 15 mm complete including taking down or up 15 mm steel water tubing and removing to store complete all as specified and directed by Engineer-in-Charge.
S&F steel water tubing, galvanised, medium grade, ISI marked with all fittings and fixed on walls and ceilings or laid in floors bore of pipe 20 mm complete including taking down or up 20mm steel water tubing and removing to store complete all as specified and directed by Engineer-in-Charge.
S&F in repair CP bib taps long body , cast copper alloy, fancy type with crutch or butterfly handles, chromium plated, screwed down to iron pipes or for brass ferrule of 15 mm bore complete all as specified and directed by Engr-In-Charge.
S&F in repair CP stop/angle valves, cast copper alloy, fancy type, chromium plated with long shank & cup (concealed type) with crutch or butterfly handle, screwed both ends for iron pipe of 15 mm bore complete all as specified and directed by Engr-In-Charge.
S&F in repair two way angle stop valves, cast copper alloy, fancy type, chromium plated with crutch or butterfly handle, screwed both ends for iron pipe of 15 mm bore complete all as specified and directed by Engr-In-Charge.
S&F in repair Hand Shower (Health Faucet) with 1 Meter Long Easy Flex Tube in Chrome Finish & Wall Hook complete all as specified and as directed by Engineer-in-Charge.
S&F in repair 15 mm pillar taps swan neck cast copper alloy, with capstan heads, chromium plated screwed down high pressure, with or without lettered "Hot" or Cold with long screwed shanks and fly nuts screwed for iron pipes and fixed , fancy type complete all as specified and directed by Engr-In-Charge.
S&F in repairs Vitreous China urinal half stall type, white complete all as specified and directed by Engr-In-Charge.
S&F in repair 110 mm bore PVC (SWR ) pipe single socketed in any length with rubber ring joints, laid in trenches or in floors etc including removing from site complete all as specified and directed by Engineer-in-Charge.
S&F in repair 75 mm bore PVC (SWR ) pipe single socketed in any length with rubber ring joints, laid in trenches or in floors etc including removing from site complete all as specified and directed by Engineer-in-Charge.
Cleaning of water tank of capacity exc 500 ltrs and n. exc 1000 ltrs & removing all scale & dirt, etc., from tanks & from mouths of circulating pipes, etc. including disconnecting and refixing complete all as specified and directed by Engineer-in-Charge.
Cleaning of water tank of capacity exc 250 ltrs and n. exc 500 ltrs & removing all scale & dirt, etc., from tanks & from mouths of circulating pipes, etc. including disconnecting and refixing complete all as specified and directed by Engineer-in-Charge.
S&F fancy type mirror of 5 to 10 mm thick glossy glass decorative type, any size and shape bevelled edges all-round, wall mounted mirror complete all as specified and directed by Engineer-in-Charge.
S&F in repair for 20 mm dia chromium plated pipes for curtain rods complete all as specified and directed.
S&F in repair for Chromium plated brackets and knobs for curtain rods complete all as specified and directed.
S&F vertical venetian blinds made out of nylon cloth of any clour 100mm wide strip as approved including hanging arrangement rollers etc complete all as specified and directed by Engr-in-Charge. Make : MAC / MARVEL / MAX / DECK
Dismantling plain corrugated steel sheeting any gauge thick ness including Nainital and similar pattern complete all as specified and directed.
S&F for 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugated side lap fixed with L or J type or cranked hook bolts complete all as specified and directed.
S&F for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.
S&F in repair self adhesive anti skid strips for stairs of approved width (50mm to 75mm) completed all as specified and directed by Engr-in-Charge.
Hacking out old broken glass (any thickness, size, quality or description) from wooden/ Steel /Aluminium frames glazed with putty or fixed with bead. (Old bead to be reused to fix glass) complete all as specified and directed.
S&F 4mm thick frosted float glass and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified.
S&F Stainless steel 304 grade wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed to window/door frames frame complete all as specified.
Dismantling of wrought iron or mild steel works of any description , size or in any position including door, gates etc all as specified.
Excavation in hard/dense soil for post holes or similar holes each n. exc. 0.5Cum getting out returning filling and ramming earth or broken rabble mixed with earth around in layer n. exc. 25cm all as specified and directed.
M & L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in foundation etc complete all as specified and directed.
M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc similar work conforming to Fe.290.Gde-E-165 all as specified and directed.
S & F Pipe, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) and similar work conforming to Fe-290 Gde E-165 all as specified and directed.
M&L two coats synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description not otherwise described over 10 cm width or girth including preparation of surfaces complete all as specified.
Taking down of old /unserviceable kitchen cabinet / Cupboard incl all fixture and fittings. Note:- For measurement superficial area in elevation will be measure.
S&F factory made 18mm-19mm thick PVC foam board of density 600kg/cbm manufactured by an ISO-900-2008 certified company one side prelam and other side plain for kitchen cabinet shutter including machine pressed PVC edge banding in matching colour over all exposed edge Complete all as specified and directed.
S&F factory made 18mm-19mm thick plain PVC foam board of density 600kg/cum manufactured by an ISO-900-2008 certified company for Shelf / Partitions / Drawer Complete all as specified and directed.
S&F factory made 8 mm thick PVC sheet of density 600kg/cum manufactured by an ISO-900-2008 certified company. Plain 8mm thick PVC sheet panelling for back side(wall side) Complete all as specified and directed.
S&F 100 mm size Stainless Steel handle, complete all as specified and as directed
S&F 38mm size Stainless Steel Piano hinges complete all as specified and as directed.
M &L for ABS body magnetic latches of size 50mm complete all as specified and directed by Engr in Charge.
S&F in repairs CP bottle trap with internal partition 32mm size 300 mm x 190 mm with wall connection pipe and wall flange complete all as specified and as directed by Engineer-in-Charge.
Supply and fix in repair for toughened glass of 12 mm thick of any colour as directed by GE as in doors, partitions, windows, bathing cubical with sliding door etc with Kolf SAFEX or OZONE fittings accessories like handle, door machine and all necessary required accessories/fitting for fixing complete, all as specified and directed by Engineer-in-Charge.
S/F in repair vitreous china coloured One piece EWCs with integrated cistern, seat cover and twin flush fittings and including P or S trap etc. all as spfd and completed. and making good to floor complete all as specified and directed by Engineer - in -Charge.
Supply and fix in repair counter top oval shape any coloured wash hand basin of size 48cmx48cm depth 13cm Cat part of Jaquar OPS-WHT-15901N or Equivalent in cera, hindware complete all as specified and directed.
M&L for Providing and applying SmartCare Damp-proof, a fibre reinforced elastomeric liquid water proofing membrane formulated with reinforcing acrylic fibres having sun reflectivity index (SRI) of 105 on top of roof surface in multiple coats @1.5 ltr/sqm. Primary coat is self-priming coat of elastomeric waterproofing liquid (Dilution with water in the ratio of 3:1) and other coats needs to be applied undiluted. The application shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of engineer-in-Charge. When 2nd coat is wet, the SmartCare Joint tapes (At corners and edges) shall be inserted b/w second coat and third coat to secure corners and edges, let the material ooze out from the tapes corner. Same treatment of SmartCare Damp-proof shall be continued to the parapet walls to better envelope the whole area. The coating shall be terminated carefully to other side of the parapet wall complete all as specified and directed by Engr-In-Charge. Note :- wk shall be carried by authorized applicator.
J D ENTERPRISES
shiva enterprises
Atish Builders LLP
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .