REPAIRS TO FENCING, PATH, BOUNDARY WALL, DRAIN AND

Amount

Demolition of Cement Concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engr-in-charge.

Demolition of brick work/ stone masonry built in cement mortor of any description including all quions, pillars etc complete all as specified and directed by Engr-in-charge.

Dismantling of post & struts (wood, steel of RCC ) any section, including taking out embedded in concrete / brick portions and making good distrubed ground etc complete all as specified and directed by Engr-in-charge.

Demolition of Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engr-in-charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engr-in-charge.

Dismantling barbed wire or fencing wire mesh, any type complete all as specified and directed by Engr-in-charge.

M & L for RCC (1:2:4) type B0 using 12.5mm graded cushed stone aggregate in cover slabs supported on walls complete all as specified and directed by Engr-in-charge. Note: Reinforcement shall be measured and paid seperately

M&L precast reinforced cement concrete 1:2:4 type B1 using 20mm graded stone aggregate and set in cement mortar 1:4 as in cover slabs (for manhole cover etc,) chajjas, shelves and similar articles with plain faces including necessary form work complete all as specified and directed by Engr-in-charge. Note: Reinforcement shall be measured and paid seperately

M&L for in repair precast cement concrete of type B1, 1:2:4 (20mm graded stone aggregate) louvers and RCC jallies, 30mm thick (measured solid), including all mouldings & frame set in cement mortar 1:4 including necessary form work complete all as specified and directed by Engr-in-charge. Note: Reinforcement shall be measured and paid seperately

S&F 75mm thick precast cement concrete (RCPC) drain cover slab factory made of size 600 X 450mm of 2MT load bearing capacity including necessary reinforcement complete all as specified and directed by Engr-in-charge.

S & F TMT Bars 10 mm dia and over, cut to length, bend to shape required, including cranking spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed by Engr-in-charge.

M&L for brick work with fly ash bricks, straight or curved on plan not exc 6 m mean radius built in CM 1:6 complete all as specified and directed by Engr-in-charge.

,--ditto--- all as per serial item No 12 above but except bricks (bricks obtained from item no 2) complete all as specified and directed by Engr-in-charge.

M&L for Cement Concrete 1:2:4 type B-0 (Using 12.5 mm graded crushed stone aggr) as in coping including necessary form work and finishing the surfaces etc complete all as specified and directed by Engr-in-charge.

M & L cement concrete type B-2 (1:2:4) using 20mm graded aggregate in surface channel and drains including necessary formwork complete all as specified and directed by Engr-in-charge.

M & L cement concrete in type B-2 (1:2:4) 40mm graded aggregate in foundation , filling and mass concrete complete all as specified and directed by Engr-in-charge.

M & L 100 mm thick cement concrete type B2 1:2:4 type using (40mm graded stone aggregate) as in hard standing finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge.

Taking down cement or cement lime plaster of any description on brick or stone walls etc incl racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engr-in-charge.

M & L for Rendering cement plaster 15 mm thick in cement mortar 1:4 on fair face of brick work or concrete surface finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge.

M&L for rendering 15mm thick on fair faces of brick work in cement mortar 1:3 and finished surfaces even and smooth with using extra cement including WPC complete all as specified and directed by Engr-in-charge. Note : WPC shall be measured and paid seperately

Supply only integrated water proofing compound complete all as specified and directed by Engr-in-charge.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed by Engr-in-charge.

S & F for barbed wire galvanised steel 2 strand 2.24 mm dia with 2 mm dia barbs at 75 mm spacing and stringing and fixing to fencing posts including securing or tying with and privious of galvanised mild steel wire staples or steel pins etc (each line of horixontal or diagonal wire shall be measured separately) complete all as specified and directed by Engr-in-charge.

M & L for rolled mild steel in framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting of other covering, doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel handing door fitttings (exclusive or steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing confirming to Fe-410 W (Gde-E-250) complete all as specified and directed by Engr-in-charge.

M&L for mild steel work as in posts or struts in fencing including cutting tops to shape as directed drilling holes, notching for wire etc flat iron fillets (for securing wire mesh etc) including all necessary bolting or riveting etc and similar work confirming to Fe-290 Gde E-165 complete all as specified and directed by Engr-in-charge.

M & L Providing two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces over 10 cm width or girth including preparation of new steel surfaces complete all as specified and directed by Engr-in-charge.

M & L for 75 mm thick cement concrete type C-2 (1:3:6) (40mm graded aggregate) use as in sub base of floor and including necessary form work complete all as specified and directed by Engr-in-charge.

M & L Machine pressed pre cast concrete interlocking chemically treated paver block any shape and size confirming to IS- 15658-2006 of 60mm thickness, M-35 grade and including over 50mm thick silver sand cushion complete all as specified and directed by Engr-in-charge.

M&L for precast cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in kerb stones size 300mm x 300mm x 100mm with plain fair faces, including chamfers, weathering, throating etc setting in CM 1:4 complete all as specified and directed by Engr-in-charge.

M&L for filleting in any position and to any shape in cement mortar 1:4 including all mitres, stops, etc section of fillet n.exc. 25 sqcm complete all as specified and directed by Engr-in-charge.

M & L reinforced concrete pipes, class NP2, laid and jointed complete with collars of size 450 mm bore complete all as specified and directed by Engr-in-charge.

M & L reinforced concrete pipes, class NP2, laid and jointed complete with collars of size 200 mm bore complete all as specified and directed by Engr-in-charge.

Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ

Aggarwal brothers and company

M/S KARNI CONSTRUCTION COMPANY

M/s GURFATEH BUILDERS

M/S BUDHRAM BISHNOI

M/s R.N Construction Co.

GOYAL ENTERPRISES

M/S Shree Ram Enterprises