REPAIRS TO PLASTERING, FLOORING AND CERTAIN B/R MISC WORK AT OTM/MD ACCN BLDGS OF HQ INF DIV CAMP, FD HOSP, MAHAR, IDSR, CHILDREN SCHOOL AND ALLIED AREA IN AGE B/R-I UNDER GE DIPATOLI

Amount

Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15 cm thickness below or above the ground floor etc complete all as specified and directed

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed

Dismantling of stone slab and tiles of any description or thickness in floors, aprons etc laid in cm complete all as specified and directed

Demoliation of brickwork or stone/boulder masonry, built in cement mortor including all quions, arches pillars, etc but excluding ashlar facings dressed stonework and precast concrete articles complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding(but not backing) and rubbish off premises etc, complete all as specified and directed

M&L for 75 mm thick cement concrete (1:3:6) type C2, using 40 mm stone aggregate finished even & smooth without using extra cement as in plinth protection etc. complete all as specified and directed

M&L for 40 mm thick PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in floors below or above ground level complete all as specified and directed

M&L Cement concrete, type E2- (1:5:10) (40mm graded aggreated in foundations, filling and mass concrete in sunken portion of IWC and bathroom

M&L for rendering 15 mm thick on concrete or brick surface in cm (1:3) mixed with WPC as per manufacturer instructions and finishes of sunken surfaces even and smooth with out using extra cement. Note : WPC will be measured and paid separtely

M&L for applying two coats evenly a tack coat of hot air blown bitumen of grade 85/25 @ 1.50 Kg per sqm per coat including cleaning of surface over polythene film complete all as specified and directed

M&L for polythene film black 200 micron thick laid in floor, vertical surface etc complete all as specified and directed.

M &L for machine cut cuddapah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab incl rubbing and polishing, including 15mm th screed bed (1:6). complete all as specified and directed

Material and Labour for 20mm thick machine cut (table rubbed and polished) Granite of any type as in steps, jambs, pillars, cills, cooking platforms like in cm (1:4) including pointing with white cement mixed with admixture of pigment to match the shade of the slab complete including screed bed 15mm thick in cm (1:6) all as specified and direccted

M & L for rounding to edges of granite or stone slabs one edge, such as in cooking platform, and other similar situations

S&F Non - skid Ceramic colour tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screedbed in cm (1:6) complete all as specified and direccted

M&L for coloured glazed ceramic tiles in vertical surface 350mm x 250mm x 7mm thick over and including10 mm thick cement plaster in cm (1:4); set and jointed in neat cement slurry & pointed in white or coloured cement to match the surfaces complete all as specified and directed.

S&F Vtrified Ceramic tiles light shade 10 mm thick (square/ rectangular) area of each tile not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screedbed in cm (1:6) complete all as specified and direccted. (Make : Kajariya or equivalent)

S&F Vtrified Ceramic tiles light shade 10 mm thick (square/ rectangular) area of each tile not exceeding 0.36 sqm in vertical surface/skriting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick plaster with backing coat in cm (1:4) complete all as specified and direccted. (Make : Kajariya or equivalent)

Taking up or down steel tubing and connections including for refixing or removal 15mm borecomplete all as specified and directed

Taking up or down steel tubing and connections including for refixing or removal 20mm borecomplete all as specified and as directed by Engr-in-Charge.

S&F steel tubing and connection in new or old position to walls, ceiling,floors etc complete all as specified and as directed 15 mm bore medium grade, with all fittings, fitted to wall and ceiling or laid in floor complete all as specified and directed

S&F steel tubing and connection in new or old position to walls, ceiling, floors etc complete all as specified and as directed 20 mm bore medium grade, with all fittings, fitted to wall and ceiling or laid in floor complete all as specified and directed

S&F in repair Bib taps, 15 mm bore cast copper alloy chromium plated fancy (half turn) type with crutch or butterfly handle, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed

S&F in repairs pillar tap cast 15mm bore copper alloy fancy (half turn) type with capstan head chromium plated screwed down high pressure with or without lettered head "HOT" or "COLD" with long screwed shank and flynuts, screwed for iron pipe

S&F in repair 15mm dia stop valve fancy type chromium plated concealed type, screwed down high pressur, with crutch or butterfly handle, screwed both hands for iron pipe or for unions.

S&F in repair 15mm dia stop valve fancy type chromium plated, screwed down high pressur, with crutch or butterfly handle, screwed both hands for iron pipe or for unions.

S&F in repair Gun-metal, globe or gate valves 20mm dia with iron wheel head, screwed both ends for iron pipe and fixed.

S&F in repair 32/38/40mm dia and length as required at site, PVC waste fittings for basin/urinal and kitchen sink etc complete with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed

S&F in repair PVC Connections 15mm size with PTMT nuts of length 450mm including washer.

S&Fix in repairs decorative curtain rails made out of 25mm dia (outer dia) MS pipe having wall thickness 0.63mm, PVC coated of any colours and pattern as approved by the Engr-in-Charge, overall dia 28 to 29mm, including provn of two nos brackets on each ends and provn of two nos of globe on each ends for each windows/door for fixing completed with fency design complete all as specified and directed

S & F in repair Tubular towel rail, 20mm dia, D type, 60 cm long between flanges CP brass complete all as specified and directed

M&L brick work using fly ash brick curved or straight on plan exc 6 mtr mean radius built in cm (1:6). complete all as specified and directed

M&L brick work using sub class B brick curved or straight on plan to any radius in half brick wall builit in cm (1:4) complete all as specified and directed

M&L for repair and rendering 10mm thick in cm (1:3) on chajjas, facia, roof projection, column sides, beam bottom and sides including throating after removing cracked plaster and concrete including cleaning of viisible reinforcement and treating with cement slurry also necessary repair to cracked concrete if any with cement concrete (1:2:4) Type B-0 using 12.5mm graded aggregate including necessary scafolding work for double/single storey bldgs complete all as specified and directed

Taking down cement plaster on brick/stone surface of wall built in cement mortar including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed

M&L for rendering 15 mm thick on brick surface in cm (1:4) mixed with WPC as per manufacturer instructions and finishes surfaces even and smooth with out using extra cement. Note : WPC will be measured and paid separtely

M&L 15mm thick rendering in cm (1:6) on fair faces of brick work or concrete surfaces and finished the surface even and smooth without using extra cement complete all as specified and directed.

M&L 5mm thick in cm (1:3) on ceiling surfaces finished even and smooth without using extra cement complete all as specified and directed

M&L for Preparing surfaces plastered on new or old undecorated surface of wall and applying two coats of cement paint complete all as specified and directed

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm to newly plastered wall surfaces complete all as specified and directed

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm icluding complete removal of existing treatment by wire brush and cleaning the surface completed all as specified and directed,

Material & Labour for applying one coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 0.90 litre/ 10 sqm to old decorated plastered wall surfaces including preparation complete all as specified and directed

M&L for Preparing old plastered or decorated surface of wall and applying one coats of cement paint complete all as specified and directed

M&L for applying two coats of oil bound distemper over one coat of chalk whiting on newly plastered or undecorated wall surfaces, including preparation of surface complete all as specified and directed.

M&L for washing, rubbing down and stopping of distempered and painted surfaces and applying two coat oil bound distempe wall/column, beam etc including cornices etc complete all as specified and directed

M&L for applying one coat of oil bound distemper on old plastered or decorated surfaces, including preparation of surface complete all as specified and directed.

M&L for preparation of newly plastered or undecorated wall surfaces and applying Three coat of white wash complete all as specified and directed

M&L for preparation of new surfaces and applying three coat of white wash on ceiling including cornices etc complete all as specified and directed

M&L for preparation of old surfaces and applying one coat of white wash on wall, column including cornices etc complete all as specified and directed

M&L for preparation and applying one coat of white wash on old decoreted ceiling surfaces complete all as specified and directed

Material and labour for applying two coats of synthetic enamel paint, over one coat pink primer over 10cm width or girth including preparation of new wood or wood based surfaces complete all as specified and directed.

Material and labour for applying one coat of synthetic enamel paint, over 10cm width or girth including preparation of old wood or wood based surfaces complete all as specified and directed.

Material and labour for applying one coat of synthetic enamel paint, over 10cm width or girth including preparation of old steel surfaces complete all as specified and directed.

Complete removal of all existing roof treatment from RCC roof including old hussion felt and preparation of surface with bire brush and cleaning with water complete all as specified and directed

Brushing net cement slurry @ 3kg/sqm on roof slab

M&L for preparation of concrete roof surfaces and applying 10mm thick plaster in cm (1:4) and finished the surface even and smooth without using extra cement complete all as specified and directed

M&L for applying a coat of bitumen primer @ 0.3L/sqm on roof surfaces

M&L for applying 3mm thik APP modified polymeric membrane over the bitumen coat surface, weight not less than 3Kg/Sqm and over lap 100mm and sealed by torch application as per manufacture insteructions compele all as specified and directed

M&L for applying two coats aluminium paint over bituminous surface of membrane complete all as specified and directed.

M&L 22 mm thick machine pressed cement concrete tiles with grey cement without pigment of size 250 mm x 250 mm laid in neat cement slurry over and including 15 mm thick bed screed in cm (1:6) mixed with chemical compound PIDIPROOF LW of DR FIXIT of PIDILITE INDUSTRIES LTD 200 milli - litre mixed with 50 Kg of cement or STP No 1 (LIQUID) of STP LTD in proportion 200 milli litre per 50 Kg cement,as per manufactures instructions and tiles properly laid with 3 mm wide joints filled with FEVIMATE TG of DR FIXIT of PIDILITE INDUSTRIES LTD or TILE GLUE of STP LTD as per manufactures instructions complete all as specified and directed

Taking down eaves gutters and rain water pipes (any size or patterns) including all fittings, heads, shoes, bends, swan-necks etc complete all as specified and directed

S&F PVC (SWR) pipe 110 mm dia single socketed in any length with rubber ring joints, fixed to wall with and including stack and clamp complete all as specified and directed

S&F PVC (SWR) bends any radius 110 mm dia complete all as specified and directed

S&F PVC (SWR) pipe 75mm dia single socketed in any length with rubber ring joints, fixed to wall with and including stack and clamp complete all as specified and directed

S&F PVC (SWR) bends any radius 75 mm dia complete all as specified and directed

Disconnecting exisiting tanks setting aside for repairng cleaning and removing al scale and dirt etc from mounths of circulating pipes etc and hoisting reconnecting and refixing in existing position. Capacity of tanks exc 250 ltrs and not exc 500 ltrs complete all as specified and directed

Taking down chowkhat with shutter without taking off shutter from chowkhat not exceeding 1.5 each complete all as specified and directed

Taking down chowkhat with shutter without taking off shutter from chowkhat exceeding 1.5 Sqm but n.exc 4sqm each complete all as specified and directed

M&L 2nd class H/wood chowkhats, plain, solid, straight, wrought, framed, rebate on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed

Taking down shutter of any description nexc 1 Sqm each complete all as specified and directed

Taking down shutter of any description exc 1 Sqm but n'exc 2 Sqm each complete all as specified and as directed by Engr-in-Charge

Material and labour for refixing existing shutter of any description not exceeding 1 sq.m each in the same opening complete all as specified and directed.

Material and labour for refixing existing shutter of any descriptions exceeding 1 Sq.m and not exceeding 2 sq.m each in the same opening complete all as specified and directed.

Supply and fix 35mm thick, 2nd class hard wood, plain framed panelled shutter (any number of panels) with panels of timber flat on both sides or of veneered particle board medium density, wood partical board with commercial faces veneers, size of the rail and stile as per IS: 1003 (Part-I), complete all as specified and directed.

S&F 35mm thk flush shutters (ISI Marked) solid core construction, with block board core and plywood, commercial type on both sides complete all as specified and directed

Supply and fix 35mm thick, 2nd class hard wood, glazed and skeleton door shutters, open rebated and prepared to receive glass or gauge etc divided into square with framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass or gauges etc sizes of members of shutters as specified in SSR Part-I Section 8 clause 8.24 (b) complete all as specified and directed.

Supply and fix 30mm thick, 2nd class hard wood, glazed and skeleton window shutters, open rebated and prepared to receive glass or gauge etc divided into square with framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass or gauges etc sizes of members of shutters as specified in SSR Part-I Section 8 clause 8.24 (b) complete all as specified and directed.

Material and labour for treating ends of posts, back of chowkats etc area of tarred exceeding 0.10 Sqm but not exceeding 0.50 Sqm complete all as specified and directed.

Material and labour for treating small articles, area tarred not exceeding 0.10 Sqm each such as hold fasts end of posts, back of chowkhats complete all as specified and directed.

M&L for mild steel works as in hold fast/wind ties etc.

M/L PCC (1:2:4) type B1 20mm grade aggregate as in hold fasts/filling of chowkhats or similar work complete all as specified and directed

M&L for powder coated alumunium chowkhat of size 101.6mm x 44.5mm x 1.5mm thick in section fixed to walls and alumunium frame with anodised alumunium screws complete all as specified and directed

M&L for 9mm thick decorative Acrylic board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to aluminium or iron frame complete all as specified and directed

S&F powder coated alumunium glazed door shutter with two panel made of vertical style of size 85x 44.5x 1.5mm and Top rail size 114.30x44.5mmx1.5mm bottom rail 150mm x 44.5mmx1.5mm and middle rail 114.3mmx44.5mmx1.5mm all alumunium section including all fittings as per door shutter such as alumunium door handles round type-2 Nos, stainless steel hinge 100mm size -4Nos, central mortice lock, alumunium tower bolts 300mm-2 Nos double leg alumunium anodised door stopper and hydraullic door closer, designation No 2, universal type, cast iron body ISI marked and necessary clips rubber packing and alumunium beading to receive and including 5.5mm thick plain tined glass or 6mm thcik alumunium composite panel in top and bottom panel, complete all as specified and directed. (Note: Door shutter will be measured outer to outer frame and no extra will be paid).

S&F powder coated alumunium three track sliding glazed windows/door shutter manufactured with approved aluminium section with three sliding shutters each shuttr width one half of the length of window with the following specification and making good the adjascent surfaces :- (a) window frame of cross section 101mm x 40mm x 1.5mm thk (b) Three way trackfor sliding shutter of cross section 91.80mmx31.75mmx1.1mm thick (c) Sliding shutter frame of cross section 40x18x1mm (d) Aluminium glazing strip of size 18.2x16.66mm (e) 4mm thick float glass of superior quality for 2 shutters (f) IDPE rubber gasket for fixing of glass (g) Locking cleat per shutter 01 Nos (h) 02 x sliding rollers per shutters (j) Aluminium wire cloth 0.36mm nominal dia of wire and average width ofaperature 1.40mm for one shutter (k) Fixing screws for frame with wall 06 per window with fancy design

Supply and fix in repairs stainless steel wire cloth 0.36 mm nominal dia. of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples/ wooden beads to existing shutter of any description complete all as specified and directed.

Re-securing or easing and adjusting without taking down wooden shutter of any description not exc 1Sqm each complete all as specified and directed

Re-securing or easing and adjusting without taking down wooden shutter of any description exc 1Sqm but n exc 2 Sqm each complete all as specified and directed

Supply and fix 100mm long butt hinges, extruded aluminium alloy with galvanized mild steel hinge pin anodized and fixed, type B-21 complete all as specified and directed.

Supply and fix 125mm long butt hinges, extruded aluminium alloy with galvanized mild steel hinge pin anodized and fixed, type B-21 complete all as specified and directed.

S & F in repair 100mm long Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed

S & F 200mm long Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed

S & F in repair 150mm long Aluminium handle cast type anodised complete all as specified and directed

S & F 100mm long Aluminium handle cast type anodised complete all as specified and directed

Supply only liquid water proofing compound.

S&F Non - skid Ceramic colour tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, on vertical surfaces as in skirtings, dado and risers to steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick plastering in cm (1:4) complete all as specified and direccted

BHARATI ENTERPRISES

ashiyana electrical company

M/S CITY ENTERPRISES

M/S SWASTIK HI-TECH BUILDERS PVT LTD

M/s Mukesh and company

M/S KAMLESHWAR SINGH

BHARAT ELECTRICAL & ELECTRICAL WORKS

M/S OMANIA ENTERPRISES